RESUMO
The application of 3D printing technologies fields for biological tissues, organs, and cells in the context of medical and biotechnology applications requires a significant amount of innovation in a narrow printability range. 3D bioprinting is one such way of addressing critical design challenges in tissue engineering. In a more general sense, 3D printing has become essential in customized implant designing, faithful reproduction of microenvironmental niches, sustainable development of implants, in the capacity to address issues of effective cellular integration, and long-term stability of the cellular constructs in tissue engineering. This review covers various aspects of 3D bioprinting, describes the current state-of-the-art solutions for all aforementioned critical issues, and includes various illustrative representations of technologies supporting the development of phases of 3D bioprinting. It also demonstrates several bio-inks and their properties crucial for being used for 3D printing applications. The review focus on bringing together different examples and current trends in tissue engineering applications, including bone, cartilage, muscles, neuron, skin, esophagus, trachea, tympanic membrane, cornea, blood vessel, immune system, and tumor models utilizing 3D printing technology and to provide an outlook of the future potentials and barriers.
Assuntos
Bioimpressão , Osso e Ossos , Tinta , Impressão Tridimensional , Engenharia Tecidual , Alicerces TeciduaisRESUMO
Nitric oxide (NO) and its by-products are important biological signals in human physiology and pathology particularly in the vascular and immune systems. Thus, in situ determination of the NO-related molecule (NOx) levels using embedded sensors is of high importance particularly in the context of cellular biocompatibility testing. However, NOx analytical reference method dedicated to the evaluation of biomaterial biocompatibility testing is lacking. Herein, we demonstrate a PAPA-NONOate-based reference method for the calibration of NOx sensors. After, the validation of this reference method and its potentialities were demonstrated for the detection of the oxidative stress-related NO secretion of vascular endothelial cells in a 3D tissue issued from 3D printing. Such NOx detection method can be an integral part of cell response to biomaterials. Graphical abstract.
Assuntos
Meios de Cultura/química , Óxidos de Nitrogênio/análise , Técnicas de Cultura de Células/instrumentação , Células Endoteliais/química , Células Endoteliais/citologia , Desenho de Equipamento , Células Endoteliais da Veia Umbilical Humana , Humanos , Medições Luminescentes/instrumentaçãoRESUMO
In many biomedical applications, titanium forms an interface with tissues, which is crucial to ensure its long-term stability and safety. In order to exert control over this process, titanium implants have been treated with various methods that induce physicochemical changes at nano and microscales. In the past 20 years, most of the studies have been conducted to see the effect of topographical and physicochemical changes of titanium surface after surface treatments on cells behavior and bacteria adhesion. In this review, we will first briefly present some of these surface treatments either chemical or physical and we explain the biological responses to titanium with a specific focus on adverse immune reactions. More recently, a new trend has emerged in titanium surface science with a focus on the crystalline phase of titanium dioxide and the associated biological responses. In these recent studies, rutile and anatase are the major two polymorphs used for biomedical applications. In the second part of this review, we consider this emerging topic of the control of the crystalline phase of titanium and discuss its potential biological impacts. More in-depth analysis of treatment-related surface crystalline changes can significantly improve the control over titanium/host tissue interface and can result in considerable decreases in implant-related complications, which is currently a big burden on the healthcare system.
Assuntos
Tecnologia Biomédica/métodos , Titânio/química , Antibacterianos/farmacologia , Cristalização , Implantes Experimentais , Propriedades de SuperfícieRESUMO
Male homosexual preference (MHP) challenges evolutionary thinking because the preference for male-male relationships is heritable, implies a fertility cost (lower offspring number), and is relatively frequent in some societies (2-6% in Western countries) for a costly trait. It has been proposed that individuals with a MHP counterbalance reproductive costs through the transfer of resources to kin, thereby improving their indirect reproduction through kin's reproductive success. This kin selection hypothesis is not supported in Western countries and Japan, although consistent evidence has been obtained in Samoa. In this study, data from Java (Indonesia) were obtained to assess the avuncular tendencies of men with contrasting sexual orientation to measure possible resource transfer. Consistent with the kin selection hypothesis, males with a homosexual orientation reported an increased willingness to transfer resources toward nephews and nieces and declared having transferred more money to nephews and nieces. We developed a method to quantitatively estimate the contribution of kin selection on inclusive reproduction associated to sexual orientation, taking into account various possible biases. Kin selection reduced the direct reproductive cost of homosexual men by 20%, so suggesting that kin selection alone is insufficient to explain the maintenance of male homosexuality. Other potential factors are discussed, as well as the limitations of the study and the social determinant operating for the expression of increased avuncular tendencies of homosexual men.
Assuntos
Família/psicologia , Homossexualidade Masculina/psicologia , Reprodução , Seleção Genética , Minorias Sexuais e de Gênero/estatística & dados numéricos , Evolução Biológica , Feminino , Humanos , Indonésia , Masculino , Comportamento Sexual , Minorias Sexuais e de Gênero/psicologiaRESUMO
The design of stimuli-responsive polymer assemblies for the controlled release of bioactive molecules has raised considerable interest these two last decades. Herein, we report the design of mechanically responsive drug-releasing films made of polyelectrolyte multilayers. A layer-by-layer (LbL) reservoir containing biodegradable polyelectrolytes is capped with a mechanosensitive LbL barrier and responds to stretching by a total enzymatic degradation of the film. This strategy is successfully applied for the release in solution of an anticancer drug initially loaded within the architecture.
Assuntos
Antineoplásicos Fitogênicos/metabolismo , Membranas Artificiais , Paclitaxel/metabolismo , Polímeros/metabolismo , Antineoplásicos Fitogênicos/química , Eletrólitos/química , Eletrólitos/metabolismo , Conformação Molecular , Paclitaxel/química , Polímeros/química , Estresse MecânicoRESUMO
The extensive innate immune response to implanted biomaterials contributes significantly to their sub-par performance and failure. Granuloma formation is one of such reactions which results in multi-cell type clusters in line with the immune reaction to implanted materials. However, currently no in vitro model of granuloma formation exists that takes into account the arrival of multiple cell types (immune cells and connective tissue cells) to the implant insertion site. In this study, we developed a two-step model based on stimulated macrophage seeding followed by fibroblast introduction after a physiologically relevant time period for mimicking initial steps of immune reaction to biomaterials and inducing granuloma like behavior. Both LPS and TNF-α induction resulted in granuloma like formations which persisted longer than the control conditions. Introduction of human fibroblasts resulted in the colonization of the surfaces where the cell numbers and the collagen secretion were dependent on the microenvironment. In order to demonstrate the capacity of our model system to monitor the reaction to a given coating, a validated antimicrobial coating (Polyarginine (PAR)/Hyaluronic acid (HA)) was used as a testing bed. The coating prevented the adhesion of macrophages while allowing the adhesion of the fibroblast at the time of their arrival. Similar to its antimicrobial activity, macrophage metabolic activity and M2 differentiation in the presence of PAR was dependent to its chain length. The incorporation of fibroblasts resulted in decreased TNF-α and increased IL-1RA secretion especially in stimulation conditions. The pro- and anti-inflammatory cytokine secretions were low for PAR/HA coatings in line with the decreased number of macrophage presence. In the presence of complex PBMC population, the coating resulted in slightly less cellular attachment, without any significant cytokine secretion; the absence of inflammatory reaction was also demonstrated in vivo in a mouse model. The described in vitro granuloma testing system can control the macrophage reaction as a function of stimulation. It can also be used for testing new biomaterials for the potential innate immune responses and also for validation of implant coatings beyond their primary function from the immune response point of view.
Assuntos
Anti-Infecciosos , Fator de Necrose Tumoral alfa , Animais , Materiais Biocompatíveis , Granuloma , Humanos , Ácido Hialurônico , Imunidade Inata , Leucócitos Mononucleares , CamundongosRESUMO
Modern 3D printing of implantable devices provides an important opportunity for the development of personalized implants with good anatomical fit. Nevertheless, 3D printing of silicone has been challenging and the recent advances in technology are provided by the systems which can print medical grade silicone via extrusion. However, the potential impacts of the 3D printing process of silicone on its biomechanical properties has not been studied in sufficient detail. Therefore, the present study compares 3D printed and moulded silicone structures for their cytotoxicity, surface roughness, biomechanical properties, and in vivo tissue reaction. The 3D printing process creates increased nanoscale roughness and noticeably changes microscale topography. Neither the presence of these features nor the differences in processes were found to result in an increase in cytotoxicity or tissue reaction for 3D printed structures, exhibiting limited inflammatory reaction and cell viability above the threshold values. On the contrary, the biomechanical properties have demonstrated significant differences in static and dynamic conditions, and in thermal expansion. Our results demonstrate that 3D printing can be used for establishing a better biomechanical microenvironment for the surrounding tissue of the implant particularly for fragile soft tissue like epithelial mucosa without having any negative effect on the cytotoxicity or in vivo reaction to silicone. For engineering of the implants, however, one must consider the differences in mechanical properties to result in correct and personalized geometry and proper physical interaction with tissues.
Assuntos
Impressão Tridimensional , Silicones , Próteses e ImplantesRESUMO
Here we report fabrication of Gelatin-based biocomposite films and their application in developing epithelial patches. The films were loaded with an epithelial cell growth factor cocktail and used as an extracellular matrix mimic for in vitro regeneration of organized respiratory epithelium using Calu-3 cell line and mesenchymal stem cells (MSCs). Our data show differentiation of Calu-3 cells on composite films as evidenced by tight junction protein expression and barrier formation. The films also supported attachment, migration, and proliferation of alveolar basal epithelial cell line A549. We also show the suitability of the composite films as a biomimetic scaffold and growth factor delivery platform for differentiation of human MSCs to epithelial cells. MSCs differentiation to the epithelial lineage was confirmed by staining for epithelial and stem cell specific markers. Our data show that the MSCs acquire the epithelial characteristics after 2 weeks with significant reduction in vimentin, increase in pan cytokeratin expression, and morphological changes. However, despite the expression of epithelial lineage markers, these cells did not form fully functional tight junctions as evidenced by low expression of junctional protein ZO1. Further optimisation of culture conditions and growth factor cocktail is required to enhance tight junction formation in MSCs-derived epithelial cells on the composite hydrogels. Nevertheless, our data clearly highlight the possibility of using MSCs in epithelial tissue engineering and the applicability of the composite hydrogels as transferrable extracellular matrix mimics and delivery platforms with potential applications in regenerative medicine and in vitro modelling of barrier tissues.
Assuntos
Epitélio/metabolismo , Matriz Extracelular/metabolismo , Gelatina/química , Ácido Hialurônico/química , Células-Tronco Mesenquimais/citologia , Engenharia Tecidual/instrumentação , Células A549 , Células Epiteliais Alveolares/citologia , Animais , Biomimética , Bovinos , Diferenciação Celular , Linhagem Celular , Linhagem Celular Tumoral , Linhagem da Célula , Movimento Celular , Células Epiteliais/citologia , Humanos , Hidrogéis/química , Mucinas/química , Células-Tronco/citologia , Engenharia Tecidual/métodos , Alicerces Teciduais , Proteína da Zônula de Oclusão-1/metabolismoRESUMO
Polydopamine (PDA) nanoparticles are versatile structures that can be stabilized with proteins. In this study, we have demonstrated the feasibility of developing PDA/polypeptides complexes in the shape of nanoparticles. The polypeptide can also render the nanoparticle functional. Herein, we have developed antimicrobial nanoparticles with a narrow size distribution by decorating the polydopamine particles with a chain-length controlled antimicrobial agent Polyarginine (PAR). The obtained particles were 3.9 ± 1.7 nm in diameter and were not cytotoxic at 1:20 dilution and above. PAR-decorated nanoparticles have exhibited a strong antimicrobial activity against S. aureus, one of the most common pathogen involved in implant infections. The minimum inhibitory concentration is 5 times less than the cytotoxicity levels. Then, PAR-decorated nanoparticles have been incorporated into gelatin hydrogels used as a model of tissue engineering scaffolds. These nanoparticles have given hydrogels strong antimicrobial properties without affecting their stability and biocompatibility while improving their mechanical properties (modulus of increased storage). Decorated polydopamine nanoparticles can be a versatile tool for the functionalization of hydrogels in regenerative medicine applications by providing bioactive properties.
RESUMO
In order to create a stable interface with the host tissue, porous implants are widely used to ensure the in-growth of the cells and the colonization of the implant. An ideal porous implant should have a 3D architecture that enables fast migration of incoming cells while not inducing a significant pro-inflammatory response by the immune cells. Moreover, in patients where the healing is impeded (patients with co-morbidities and metabolic diseases), porosity by itself is not enough for fast colonization, and the surface properties of the implant should also be controlled. In this study, we present a controlled oxidation-based surface treatment of microbead-based porous titanium implants which not only increases the colonization by connective tissue cells but also decreases the macrophage attachment. The treatment created a nanotextured surface on the implants with an acidic shift of isoelectric point (from 4.09 to 3.09) without endangering implant's mechanical integrity. The attachment and metabolic activity of activated macrophages were significantly lower on treated surfaces with an increase in the secretion of anti-inflammatory IL-1RA and a decrease in pro-fibrotic CCL-18. Human fibroblasts proliferated faster on the treated surfaces over 14 days with near complete colonization of the whole thickness of the implant with an accompanying an increase in the secretion of TGF-beta. The surface treated samples demonstrated partial filling of the entire pores. We demonstrated that the use of nanoscale surface treatments that can be applied to the whole internal surface of porous titanium implants can significantly alter both the immune response and the colonization of the implants and can be used to fine-tune and personalize implant interfaces according to patient needs.
Assuntos
Fibroblastos/metabolismo , Macrófagos/metabolismo , Titânio/química , Animais , Técnicas de Cultura de Células/instrumentação , Técnicas de Cultura de Células/métodos , Linhagem Celular , Proliferação de Células/efeitos dos fármacos , Quimiocina CCL18/metabolismo , Regulação para Baixo/efeitos dos fármacos , Fibroblastos/citologia , Fibroblastos/efeitos dos fármacos , Humanos , Proteína Antagonista do Receptor de Interleucina 1/metabolismo , Macrófagos/citologia , Macrófagos/efeitos dos fármacos , Porosidade , Próteses e Implantes , Propriedades de Superfície , Titânio/farmacologia , Regulação para Cima/efeitos dos fármacosRESUMO
Islet transplantation is one of the most efficient cell therapies used in clinics and could treat a large proportion of patients with diabetes. However, it is limited by the high requirement of pancreas necessary to provide the sufficient surviving islet mass in the hepatic tissue and restore normoglycaemia. Reduction in organ procurement requirements could be achieved by extrahepatic transplantation using a biomaterial that enhances islet survival and function. We report a plasma-supplemented hydroxypropyl methylcellulose (HPMC) hydrogel, engineered specifically using a newly developed technique for intra-omental islet infusion, known as hOMING (h-Omental Matrix Islet filliNG). The HPMC hydrogel delivered islets with better performance than that of the classical intrahepatic infusion. After the validation of the HPMC suitability for islets in vivo and in vitro, plasma supplementation modified the rheological properties of HPMC without affecting its applicability with hOMING. The biomaterial association was proven to be more efficient both in vitro and in vivo, with better islet viability and function than that of the current clinical intrahepatic delivery technique. Indeed, when the islet mass was decreased by 25% or 35%, glycaemia control was observed in the group of plasma-supplemented hydrogels, whereas no regulation was observed in the hepatic group. Plasma gelation, observed immediately post infusion, decreased anoïkis and promoted vascularisation. To conclude, the threshold mass for islet transplantation could be decreased using HPMC-Plasma combined with the hOMING technique. The simplicity of the hOMING technique and the already validated use of its components could facilitate its transfer to clinics. STATEMENT OF SIGNIFICANCE: One of the major limitations for the broad deployment of current cell therapy for brittle type 1 diabetes is the islets' destruction during the transplantation process. Retrieved from their natural environment, the islets are grafted into a foreign tissue, which triggers massive cell loss. It is mandatory to provide the islets with an 3D environment specifically designed for promoting isletimplantation to improve cell therapy outcomes. For this aim, we combined HPMC and plasma. HPMC provides suitable rheological properties to the plasma to be injectable and be maintained in the omentum. Afterwards, the plasma polymerises around the graft in vivo, thereby allowing their optimal integration into their transplantation site. As a result, the islet mass required to obtain glycaemic control was reduced by 35%.
Assuntos
Diabetes Mellitus Experimental/cirurgia , Excipientes/farmacologia , Controle Glicêmico/métodos , Hidrogéis/farmacologia , Derivados da Hipromelose/farmacologia , Transplante das Ilhotas Pancreáticas , Animais , Difusão , Excipientes/química , Hidrogéis/química , Derivados da Hipromelose/química , Ilhotas Pancreáticas/citologia , Masculino , Omento/cirurgia , Oxigênio/química , Oxigênio/metabolismo , Ratos Endogâmicos Lew , Ratos Wistar , ViscosidadeRESUMO
[This corrects the article DOI: 10.3389/fbioe.2018.00108.].
RESUMO
Advances in nanoparticle (NP) production and demand for control over nanoscale systems have had significant impact on tissue engineering and regenerative medicine (TERM). NPs with low toxicity, contrasting agent properties, tailorable characteristics, targeted/stimuli-response delivery potential, and precise control over behavior (via external stimuli such as magnetic fields) have made it possible their use for improving engineered tissues and overcoming obstacles in TERM. Functional tissue and organ replacements require a high degree of spatial and temporal control over the biological events and also their real-time monitoring. Presentation and local delivery of bioactive (growth factors, chemokines, inhibitors, cytokines, genes etc.) and contrast agents in a controlled manner are important implements to exert control over and monitor the engineered tissues. This need resulted in utilization of NP based systems in tissue engineering scaffolds for delivery of multiple growth factors, for providing contrast for imaging and also for controlling properties of the scaffolds. Depending on the application, materials, as polymers, metals, ceramics and their different composites can be utilized for production of NPs. In this review, we will cover the use of NP systems in TERM and also provide an outlook for future potential use of such systems.
RESUMO
Male homosexual preference (MHP) is an evolutionary enigma because it is partially heritable and imposes a fertility cost. In occidental societies, homosexual men are feminized at various levels and they have more older brothers than heterosexual men. To evaluate whether femininity and the fraternal birth order (FBO) effect are universal features of MHP or not, we collected original data from homosexual men, heterosexual men, and heterosexual women from Java (Indonesia). Facial photographs were used to test whether homosexual faces are feminized when compared with heterosexual ones. We found that faces manipulated to resemble the average face of homosexual men are perceived as facially feminized, suggesting that homosexual men are facially feminized compared to heterosexual men, although a higher facial femininity was not captured by morphological analyses. Then, family data were used to detect differences in siblings' composition between homosexuals and heterosexuals. Homosexual men displayed a higher number of older brothers than heterosexual men, even when sibship size was controlled for, suggesting that the FBO effect exists in Indonesian populations. Independent of sexual orientation, men with older brothers seem more feminized than those without older brothers, consistent with the immune origin of the FBO effect. In conclusion, MHP in Indonesia is partially feminized and they have more older brothers. Such features are also associated with MHP in other cultural contexts, suggesting a cross-cultural effect of men homosexual preference. An evolutionary explanation is available for the feminizing effect, although the FBO effect remains unexplained even if proximal mechanisms start to be identified.
Assuntos
Ordem de Nascimento , Reconhecimento Facial , Feminilidade , Heterossexualidade/etnologia , Homossexualidade Masculina/etnologia , Percepção Social , Adulto , Feminino , Humanos , Indonésia/etnologia , Masculino , Pessoa de Meia-Idade , Adulto JovemRESUMO
Surface of the implantable devices is the root cause of several complications such as infections, implant loosening and chronic inflammation. There is an urgent need for multifunctional coatings that can address these shortcomings simultaneously in a manner similar to the structures of extracellular matrix. Herein, we developed a coating system composed of ECM components and a naturally derived polypeptide. The interactions between the coating components create an environment that enables incorporation of an antimicrobial/angiogenic polypeptide. The film composition is based gelatin and hyaluronic acid modified with aldehyde groups (HA-Ald) that can react with poly (arginine) (PAR) through transient interactions. Nanoplasmon measurements demonstrated a significantly higher loading of PAR in films containing HA-Ald with longer retention of PAR in the structure. The presence of PAR not only provides to the film surface antimicrobial (contact-killing) properties but also increased endothelial cell-cell contacts (PECAM) and VEGFA gene expression and secretion by human vascular endothelial cells. This multifunctional coating can be easily applied to surface of implants where it can enact on several problems simultaneously.
Assuntos
Materiais Revestidos Biocompatíveis/farmacologia , Gelatina/farmacologia , Ácido Hialurônico/farmacologia , Peptídeos/farmacologia , Polímeros/farmacologia , Próteses e Implantes , Animais , Antibacterianos/farmacologia , Bovinos , Matriz Extracelular/metabolismo , Células Endoteliais da Veia Umbilical Humana/efeitos dos fármacos , Humanos , Fator A de Crescimento do Endotélio Vascular/metabolismoRESUMO
The success of tissue engineering strategy is strongly related to the inflammatory response, mainly through the activity of macrophages that are key cells in initial immune response to implants. For engineered tissues, the presence of resident macrophages can be beneficial for maintenance of homeostasis and healing. Thus, incorporation of macrophages in engineered tissues can facilitate the integration upon implantation. In this study, an in-vitro model of interaction was developed between encapsulated naive monocytes, macrophages induced with M1/M2 stimulation and incoming cells for immune assisted tissue engineering applications. To mimic the wound healing cascade, naive THP-1 monocytes, endothelial cells and fibroblasts were seeded on the gels as incoming cells. The interaction was first monitored in the absence of the gels. To mimic resident macrophages, THP-1 cells were encapsulated in the presence or absence of IL-4 to control their phenotype and then these hydrogels were seeded with incoming cells. Without encapsulation, activated macrophages induce apoptosis in endothelial cells. Once encapsulated no adverse effects were seen. Macrophage-laden hydrogels attracted more endothelial cells and fibroblasts compared to monocytes-laden hydrogels. The induction (M2 stimulation) of encapsulated macrophages did not change the overall number of attracted cells; but significantly affected their morphology. M1 stimulation by a defined media resulted in more secretion of both pro- and anti-inflammatory cytokines compared to M2 stimulation. It was demonstrated that there is a distinct effect of encapsulated macrophages on the behaviour of the incoming cells; this effect can be harnessed to establish a microenvironment more prone to regeneration upon implantation.
Assuntos
Microambiente Celular , Gelatina/farmacologia , Hidrogéis/farmacologia , Macrófagos/metabolismo , Engenharia Tecidual/métodos , Células 3T3 , Animais , Microambiente Celular/efeitos dos fármacos , Técnicas de Cocultura , Citocinas/metabolismo , Células Endoteliais da Veia Umbilical Humana/efeitos dos fármacos , Células Endoteliais da Veia Umbilical Humana/metabolismo , Células Endoteliais da Veia Umbilical Humana/ultraestrutura , Humanos , Mediadores da Inflamação/metabolismo , Macrófagos/citologia , Macrófagos/efeitos dos fármacos , Camundongos , Suínos , Células THP-1RESUMO
The function of soft tissues is intricately linked to their connections with the other systems of the body such as circulation, nervous system, and immune system. The presence of resident macrophages in tissues provides a means to control tissue homeostasis and also a way to react to the physical/biological insults and tissue damage. Thus, incorporation of resident macrophage like phenotype-controlled macrophages in engineered tissues can improve their fidelity as model tissues and also improve their rate of integration and facilitate the resolution of inflammation for regenerative medicine applications. Herein, we demonstrate two potential ways to immunoassist the remodeling process of engineered soft tissues in three-dimensional (3-D) gelatin based hydrogels containing fibroblasts and/or endothelial cells: (i) with supplementation of interleukin-4 (IL-4) in the presence of macrophages and (ii) in tri-culture via naive monocytes or differentiated macrophages. The presence of IL-4 had a proliferative effect on fibroblasts, with a significant boosting effect on proliferation and cytokine secretion in the presence of differentiated macrophages with an upregulation of activin, interleukin-1 receptor antagonist (IL-1RA), tumor necrosis factor alpha (TNF-α), and interleukin-1 beta (IL-1ß), creating a more stimulating microenvironment. The addition of IL-4 in endothelial cell/macrophage co-culture configuration improved the organization of the sprout-like structures, with a boost in proliferation at day 1 and with an upregulation of IL-6 and IL-1RA at the earliest stage in the presence of differentiated macrophages creating a favorable microenvironment for angiogenesis. In tri-culture conditions, the presence of monocytes or macrophages resulted in a denser tissue-like structure with highly remodeled hydrogels. The presence of differentiated macrophages had a boosting effect on the angiogenic secretory microenvironment, such as IL-6 and IL-8, without any additional cytokine supplementation. The presence of fibroblasts in combination with endothelial cells also had a significant effect on the secretion of angiopoietin. Our results demonstrate that incorporation of macrophages in a resident macrophage function and their phenotype control have significant effects on the maturation and cytokine microenvironment of 3-D multiple cell type-laden hydrogels, which can be harnessed for better integration of implantable systems and for more physiologically relevant in vitro tissue models with an immune component.
RESUMO
For in-dwelling implants, controlling the biological interface is a crucial parameter to promote tissue integration and prevent implant failure. For this purpose, one possibility is to facilitate the establishment of the interface with cell-laden hydrogels fixed to the implant. However, for proper functioning, the stability of the hydrogel on the implant should be ensured. Modification of implant surfaces with an adhesive represents a promising strategy to promote the adhesion of a cell-laden hydrogel on an implant. Herein, we developed a peptidic adhesive based on mussel foot protein (L-DOPA-L-lysine)2-L-DOPA that can be applied directly on the surface of an implant. At physiological pH, unoxidized (L-DOPA-L-lysine)2-L-DOPA was supposed to strongly adhere to metallic surfaces but it only formed a very thin coating (less than 1 nm). Once oxidized at physiological pH, (L-DOPA-L-lysine)2-L-DOPA forms an adhesive coating about 20 nm thick. In oxidized conditions, L-lysine can adhere to metallic substrates via electrostatic interaction. Oxidized L-DOPA allows the formation of a coating through self-polymerization and can react with amines so that this adhesive can be used to fix extra-cellular matrix based materials on implant surfaces through the reaction of quinones with amino groups. Hence, a stable interface between a soft gelatin hydrogel and metallic surfaces was achieved and the strength of adhesion was investigated. We have shown that the adhesive is non-cytotoxic to encapsulated cells and enabled the adhesion of gelatin soft hydrogels for 21 days on metallic substrates in liquid conditions. The adhesion properties of this anchoring peptide was quantified by a 180° peeling test with a more than 60% increase in peel strength in the presence of the adhesive. We demonstrated that by using a biomimetic adhesive, for the application of cell-laden hydrogels to metallic implant surfaces, the hydrogel/implant interface can be ensured without relying on the properties of the deposited biomaterials.
Assuntos
Materiais Biocompatíveis/química , Materiais Biomiméticos/química , Hidrogéis/química , Metais/química , Desenho de Prótese/métodos , Células 3T3 , Adesivos , Animais , Bivalves , Adesão Celular , Di-Hidroxifenilalanina/química , Fibroblastos/química , Fibroblastos/metabolismo , Gelatina/química , Humanos , Concentração de Íons de Hidrogênio , Lisina/química , Camundongos , Peptídeos/química , Próteses e Implantes , Quinonas/química , Transglutaminases/químicaRESUMO
The immediate tissue microenvironment of implanted biomedical devices and engineered tissues is highly influential on their long term fate and efficacy. The creation of a long-term anti-inflammatory microenvironment around implants and artificial tissues can facilitate their integration. Macrophages are highly plastic cells that define the tissue reactions on the implanted material. Local control of macrophage phenotype by long-term fixation of their healing activities and suppression of inflammatory reactions are required to improve implant acceptance. Herein, we describe the development of a cytokine cocktail (M2Ct) that induces stable M2-like macrophage phenotype with significantly decreased pro-inflammatory cytokine and increased anti-inflammatory cytokine secretion profile. The positive effect of the M2Ct was shown in an in vitro wound healing model; where M2Ct facilitated wound closure by human fibroblasts in co-culture conditions. Using a model for induction of inflammation by LPS we have shown that the M2Ct phenotype is stable for 12days. However, in the absence of M2Ct in the medium macrophages underwent rapid pro-inflammatory re-programming upon IFNg stimulation. Therefore, loading and release of the cytokine cocktail from a self-standing, transferable gelatin/tyraminated hyaluronic acid based release system was developed to stabilize macrophage phenotype for in vivo applications in implantation and tissue engineering. The M2Ct cytokine cocktail retained its anti-inflammatory activity in controlled release conditions. Our data indicate that the direct application of a potent M2 inducing cytokine cocktail in a transferable release system can significantly improve the long term functionality of biomedical devices by decreasing pro-inflammatory cytokine secretion and increasing the rate of wound healing. STATEMENT OF SIGNIFICANCE: Uncontrollable activation of macrophages in the microenvironment of implants and engineered tissues is a significant problem leading to poor integration of implants and artificial tissues. In the current manuscript we demonstrate that self-standing, transferable gelatin/tyraminated hyaluronic acid based thin films are perspective tools for controlled release of anti-inflammatory cytokine combinations and can be used to down-modulate macrophage activation on implant surfaces. We also show that optimized cytokine cocktail consisting of IL4/IL10/TGFß1 (M2Ct) induces long-term anti-inflammatory and pro-healing phenotype in human primary monocyte-derived macrophages. This cocktail formulation could be loaded on gelatin/tyraminated films and promoted favorable M2-like macrophage phenotype with low responsiveness to pro-inflammatory stimuli. Such self-standing release systems can be used for prolonged local control of macrophage phenotype upon implantation.
Assuntos
Citocinas/imunologia , Macrófagos/imunologia , Macrófagos/transplante , Regeneração/imunologia , Alicerces Teciduais , Cicatrização/imunologia , Transplante de Células/métodos , Células Cultivadas , Meios de Cultura/metabolismo , Preparações de Ação Retardada/síntese química , Humanos , Ativação de Macrófagos/imunologia , Macrófagos/citologia , Próteses e ImplantesRESUMO
Delivery of growth factors is an indispensable part of tissue engineering. Here, we describe a detachable membrane-based release system composed of extracellular matrix components that can be attached to hydrogels to achieve directional release of bioactive molecules. This way, the release of cytokines/growth factors can be started at a desired point of tissue maturation or directly in vivo. As a model, we develop thin films of an interpenetrating network of double-cross-linked gelatin and hyaluronic acid derivatives. The use of the auxiliary release system with vascular endothelial growth factor results in extensive sprouting by encapsulated vascular endothelial cells. The presence of the release system with interleukin-4 results in clustering of encapsulated macrophages with a significant decrease in M1 macrophages (proinflammatory). This system can be used in conjunction with three-dimensional structures as an auxiliary system to control artificial tissue maturation and growth.