Aptapaper─An Aptamer-Functionalized Glass Fiber Paper Platform for Rapid Upconcentration and Detection of Small Molecules.

We tested a paper-based platform ("Aptapaper") for the upconcentration and analysis of small molecules from complex matrices for two well-characterized aptamers, quinine and serotonin binding aptamers (QBA and SBA, respectively). After incubating the aptapaper under conditions that ensure correct aptamer folding, the aptapaper was used to upconcentrate target analytes from complex matrices. Aptapaper was rinsed, dried, and the target analyte was detected immediately or up to 4 days later by paper spray ionization coupled to high-resolution mass spectrometry (PS-MS). The minimum concentrations detectable were 81 pg/mL and 1.8 ng/mL for quinine and serotonin, respectively, from 100 mM AmAc or water. Complementary characterization of the QBA aptapaper system was performed using an orthogonal fluorescence microscopy method. Random adsorption was analyte-specific and observed for quinine, but not serotonin. This aptapaper approach is a semiquantitative (10-20% RSD) platform for upconcentration of small metabolites by mass spectrometry.

Molecular Perturbation Effects in AFM-Based Tip-Enhanced Raman Spectroscopy: Contact versus Tapping Mode.

Tip-enhanced Raman spectroscopy (TERS) is a powerful tool for nondestructive and label-free surface chemical characterization at nanometer length scales. However, despite being considered nondestructive, the interaction of the TERS probe used in the analysis can alter the molecular organization of the sample. In this study, we investigate the role of the atomic force microscopy (AFM) feedback (contact mode and tapping mode) on molecular perturbation in TERS analysis of soft samples using a self-assembled monolayer (SAM) of 2-chloro-4-nitrobenzene-1-thiol (Cl-NBT) as a test sample. Surprisingly, the tapping mode shows a consistently higher TERS signal resulting from a minimal perturbation of the Cl-NBT SAM compared to the contact mode. This study provides novel insights into the choice of the correct AFM-TERS operation mode for nanoscale chemical analysis of soft and delicate samples and is expected to expedite the growing application of TERS in this area.

Nanoscale chemical analysis of 2D molecular materials using tip-enhanced Raman spectroscopy.

Two-dimensional (2D) molecular materials have attracted immense attention due to their unique properties, promising a wide range of exciting applications. To understand the structure-property relationship of these low-dimensional materials, sensitive analytical tools capable of providing structural and chemical characterisation at the nanoscale are required. However, most conventional analytical techniques fail to meet this challenge, especially in a label-free and non-destructive manner under ambient conditions. In the last two decades, tip-enhanced Raman spectroscopy (TERS) has emerged as a powerful analytical technique for nanoscale chemical characterisation by combining the high spatial resolution of scanning probe microscopy and the chemical sensitivity and specificity of surface-enhanced Raman spectroscopy. In this review article, we provide an overview of the application of TERS for nanoscale chemical analysis of 2D molecular materials, including 2D polymers, biomimetic lipid membranes, biological cell membranes, and 2D reactive systems. The progress in the structural and chemical characterisation of these 2D materials is demonstrated with key examples from our as well as other laboratories. We highlight the unique information that TERS can provide as well as point out the common pitfalls in experimental work and data interpretation and the possible ways of averting them.

Probing coke formation during the methanol-to-hydrocarbon reaction on zeolite ZSM-5 catalyst at the nanoscale using tip-enhanced fluorescence microscopy.

The deactivation mechanism of the widely used zeolite ZSM-5 catalysts remains unclear to date due to the lack of analytical techniques with sufficient sensitivity and/or spatial resolution. Herein, a combination of hyperspectral confocal fluorescence microscopy (CFM) and tip-enhanced fluorescence (TEFL) microscopy is used to study the formation of different coke (precursor) species involved in the deactivation of zeolite ZSM-5 during the methanol-to-hydrocarbon (MTH) reaction. CFM submicron-scale imaging shows a preferential formation of graphite-like coke species at the edges of zeolite ZSM-5 crystals within 10 min of the MTH reaction (i.e., working catalyst), whilst the amount of graphite-like coke species uniformly increased over the entire zeolite ZSM-5 surface after 90 min (i.e., deactivated catalyst). Furthermore, TEFL nanoscale imaging with ∼35 nm spatial resolution revealed that formation of coke species on the zeolite ZSM-5 surface is non-uniform and a relatively larger amount of coke is formed at the crystal steps, indicating a higher initial catalytic activity.

Tip Recycling for Atomic Force Microscopy-Based Tip-Enhanced Raman Spectroscopy.

Tip-enhanced Raman spectroscopy (TERS) is a powerful tool for the characterization of surfaces and two-dimensional materials, delivering both topographical and chemical information with nanometer-scale spatial resolution. Atomic force microscopy (AFM)-TERS combines AFM with a Raman spectrometer and is a very versatile technique, capable of working in vacuum, air, and liquid, and on a variety of different samples. A metalized AFM tip is necessary in order to take advantage of the plasmonic enhancement. The most commonly used metal is Ag, thanks to its high plasmonic activity in the visible range. Unfortunately, though, the tip metallization process is still challenging and not fully reliable, yielding inconsistent enhancement factors even within the same batch of tips; as a consequence, many tips are usually prepared at once (for a single experiment), to ensure that at least one of them is sufficiently active. As the lifetime of an unprotected, Ag-coated plasmonic probe is only a few hours, the procedure is inefficient and results in a substantial waste of materials and money. In this work, we establish a cleaning routine to effectively re-use Ag-coated AFM-TERS probes, drastically reducing costs without compromising the quality of the experimental results.