RESUMO
Polyvinyl Alcohol (PVA) hydrogel plugs were implanted in artificial osteochondral defects on the trochlear groove of rat knees. After 0, 3, 6, 12, and 24 weeks of followup, samples containing the implants were mechanically evaluated by creep indentation test, chemically, and histologically by optical microscopy. The mechanical test pointed towards an increase of the implant creep modulus and the chemical analysis exhibited an increasing concentration of calcium and phosphorus within the implants over time. Optical microscopy showed no foreign body reaction and revealed formation, differentiation, and maintenance of new tissue at the defect/implant interface. The absence of implant wear indicated that the natural articular lubrication process was not disturbed by the implant. The performance of the irradiated and acetalized PVA was considered satisfactory for the proposed application.
RESUMO
The covering of ultra high molecular weight polyethylene (UHMWPE) and calcium hydroxyapatite (HA)/tricalcium phosphate (TCP) porous solid substrate with polyHEMA hydrogel has been studied aiming at the development of devices to be used as artificial articular surfaces in joint prosthesis or osteochondral repair grafts. Commercial porous UHMWPE was used. Ceramic porous substrate was prepared by load compaction of an HA and TCP powder mixture obtained by aqueous precipitation technique. Two different compaction loads and grain size distribution was used. Polymer particles were added to the powder mixture in order to increase the substrate porosity after the sintering process. The porous substrate was covered with polyHEMA hydrogel by in situ polymerization. Morphological analysis (SEM) showed that a hydrogel layer formed in the porous solid top surface was fixed to the substrate by mechanical interlocking because the porous surface was filled by the hydrogel. After hydrogel covering, the resultant devices showed a decrease in the compressive elastic modulus that was influenced by the porous substrate material.