A new quantitative method for the non-invasive documentation of morphological damage in paintings using RTI surface normals.

In this paper we propose a reliable surface imaging method for the non-invasive detection of morphological changes in paintings. Usually, the evaluation and quantification of changes and defects results mostly from an optical and subjective assessment, through the comparison of the previous and subsequent state of conservation and by means of condition reports. Using quantitative Reflectance Transformation Imaging (RTI) we obtain detailed information on the geometry and morphology of the painting surface with a fast, precise and non-invasive method. Accurate and quantitative measurements of deterioration were acquired after the painting experienced artificial damage. Morphological changes were documented using normal vector images while the intensity map succeeded in highlighting, quantifying and describing the physical changes. We estimate that the technique can detect a morphological damage slightly smaller than 0.3 mm, which would be difficult to detect with the eye, considering the painting size. This non-invasive tool could be very useful, for example, to examine paintings and artwork before they travel on loan or during a restoration. The method lends itself to automated analysis of large images and datasets. Quantitative RTI thus eases the transition of extending human vision into the realm of measuring change over time.

Technique based on LED multispectral imaging and multivariate analysis for monitoring the conservation state of the Dead Sea Scrolls.

The aim of this project is the development of a noninvasive technique based on LED multispectral imaging (MSI) for monitoring the conservation state of the Dead Sea Scrolls (DSS) collection. It is well-known that changes in the parchment reflectance drive the transition of the scrolls from legible to illegible. Capitalizing on this fact, we will use spectral imaging to detect changes in the reflectance before they become visible to the human eye. The technique uses multivariate analysis and statistical process control theory. The present study was carried out on a "sample" parchment of calfskin. The monitoring of the surface of a commercial modern parchment aged consecutively for 2 h and 6 h at 80 °C and 50% relative humidity (ASTM) was performed at the Imaging Lab of the Library of Congress (Washington, DC, U.S.A.). MSI is here carried out in the vis-NIR range limited to 1 µm, with a number of bands of 13 and bandwidths that range from about 10 nm in UV to 40 nm in IR. Results showed that we could detect and locate changing pixels, on the basis of reflectance changes, after only a few "hours" of aging.

Snapshot hyperspectral imaging in ophthalmology.

Retinal imaging spectroscopy can provide functional maps using chromophore spectra. For example, oxygen saturation maps show ischemic areas from diabetes and venous occlusions. Obtaining retinal spatial-spectral data has been difficult due to saccades and long data acquisition times (>5 s). We present a snapshot imaging spectrometer with far-reaching applicability that acquires a complete spatial-spectral image cube in approximately 3 ms from 450 to 700 nm with 50 bands, eliminating motion artifacts and pixel misregistration. Current retinal spectral imaging approaches are incapable of true snapshot operation over a wide spectral range with a large number of spectral bands. Coupled to a fundus camera, the instrument returns true color retinal images for comparison to standard fundus images and for image validation while the patient is still dilated. Oxygen saturation maps were obtained with a three-wavelength algorithm: for healthy subjects arteries were approximately 95% and veins 30 to 35% less. The instrument is now undergoing clinical trials.

Direct Analysis in Real Time Mass Spectrometry for the Nondestructive Investigation of Conservation Treatments of Cultural Heritage.

Today the long-term conservation of cultural heritage is a big challenge: often the artworks were subjected to unknown interventions, which eventually were found to be harmful. The noninvasive investigation of the conservation treatments to which they were subjected to is a crucial step in order to undertake the best conservation strategies. We describe here the preliminary results on a quick and direct method for the nondestructive identification of the various interventions of parchment by means of direct analysis in real time (DART) ionization and high-resolution time-of-flight mass spectrometry and chemometrics. The method has been developed for the noninvasive analysis of the Dead Sea Scrolls, one of the most important archaeological discoveries of the 20th century. In this study castor oil and glycerol parchment treatments, prepared on new parchment specimens, were investigated in order to evaluate two different types of operations. The method was able to identify both treatments. In order to investigate the effect of the ion source temperature on the mass spectra, the DART-MS analysis was also carried out at several temperatures. Due to the high sensitivity, simplicity, and no sample preparation requirement, the proposed analytical methodology could help conservators in the challenging analysis of unknown treatments in cultural heritage.

Development of a technique based on multi-spectral imaging for monitoring the conservation of cultural heritage objects.

A new approach for monitoring the state of conservation of cultural heritage objects surfaces is being developed. The technique utilizes multi-spectral imaging, multivariate analysis and statistical process control theory for the automatic detection of a possible deterioration process, its localization and identification, and the wavelengths most sensitive to detecting this before the human eye can detect the damage or potential degradation changes occur. A series of virtual degradation analyses were performed on images of parchment in order to test the proposed algorithm in controlled conditions. The spectral image of a Dead Sea Scroll (DSS) parchment, IAA (Israel Antiquities Authority) inventory plate # 279, 4Q501 Apocryphal Lamentations B, taken during the 2008 Pilot of the DSS Digitization Project, was chosen for the simulation.

An automated front-end monitor for anthrax surveillance systems based on the rapid detection of airborne endospores.

A fully automated anthrax smoke detector (ASD) has been developed and tested. The ASD is intended to serve as a cost effective front-end monitor for anthrax surveillance systems. The principle of operation is based on measuring airborne endospore concentrations, where a sharp concentration increase signals an anthrax attack. The ASD features an air sampler, a thermal lysis unit, a syringe pump, a time-gated spectrometer, and endospore detection chemistry comprised of dipicolinic acid (DPA)-triggered terbium ion (Tb(3+)) luminescence. Anthrax attacks were simulated using aerosolized Bacillus atrophaeus spores in fumed silica, and corresponding Tb-DPA intensities were monitored as a function of time and correlated to the number of airborne endospores collected. A concentration dependence of 10(2)-10(6) spores/mg of fumed silica yielded a dynamic range of 4 orders of magnitude and a limit of detection of 16 spores/L when 250 L of air were sampled. Simulated attacks were detected in less than 15 min.

Spatial-spectral modulating snapshot hyperspectral imager.

Experimental results are presented for a computed tomography imaging spectrometer (CTIS) with imposed spatial-spectral modulation on the image scene. This modulation structure on the CTIS tomographic dispersion created substantial gains in spectral reconstruction resolution after standard iterative, nonlinear, inversion techniques were used. Modulation limits system ambiguities, so high-frequency spectral and low-frequency spatial scene data could be recovered. The results demonstrate how spatial modulation acts as a high-frequency spectral deconvolver for the snapshot hyperspectral imager technology.

All-reflective snapshot hyperspectral imager for ultraviolet and infrared applications.

Snapshot hyperspectral imaging simultaneously acquires spatial and spectral information about a scene. We report on the first, to our knowledge, all-reflective snapshot hyperspectral imager in the form of a computed tomography imaging spectrometer (CTIS). The reflective design allows for instrument simplicity for applications in the ultraviolet and infrared. To realize a CTIS in a reflective Offner configuration, a reflective two-dimensional computer-generated hologram grating is fabricated on a convex spherical substrate by direct-write electron-beam lithography. Furthermore, a reconfigurable reflective field stop is implemented with a micromirror array to provide high-contrast spatial-spectral filtering, region-of-interest selection, and spatial structure formation.