The Dichotomy of Mn-H Bond Cleavage and Kinetic Hydricity of Tricarbonyl Manganese Hydride Complexes.

Acid-base characteristics (acidity, pKa, and hydricity, ΔG°H- or kH-) of metal hydride complexes could be a helpful value for forecasting their activity in various catalytic reactions. Polarity of the M-H bond may change radically at the stage of formation of a non-covalent adduct with an acidic/basic partner. This stage is responsible for subsequent hydrogen ion (hydride or proton) transfer. Here, the reaction of tricarbonyl manganese hydrides mer,trans-[L2Mn(CO)3H] (1; L = P(OPh)3, 2; L = PPh3) and fac-[(L-L')Mn(CO)3H] (3, L-L' = Ph2PCH2PPh2 (dppm); 4, L-L' = Ph2PCH2-NHC) with organic bases and Lewis acid (B(C6F5)3) was explored by spectroscopic (IR, NMR) methods to find the conditions for the Mn-H bond repolarization. Complex 1, bearing phosphite ligands, features acidic properties (pKa 21.3) but can serve also as a hydride donor (ΔG≠298K = 19.8 kcal/mol). Complex 3 with pronounced hydride character can be deprotonated with KHMDS at the CH2-bridge position in THF and at the Mn-H position in MeCN. The kinetic hydricity of manganese complexes 1-4 increases in the order mer,trans-[(P(OPh)3)2Mn(CO)3H] (1) < mer,trans-[(PPh3)2Mn(CO)3H] (2) ≈ fac-[(dppm)Mn(CO)3H] (3) < fac-[(Ph2PCH2NHC)Mn(CO)3H] (4), corresponding to the gain of the phosphorus ligand electron-donor properties.

Versatile Reactivity of Half-Sandwich Rhodium(III) Iminophosphonamide Complexes.

Novel 18e̅ and 16e̅ pentamethylcyclopentadienyl rhodium(III) complexes [(η5-C5Me5)RhX(NPN)] (1a,b, X = Cl; 2a-c, X = PF6, BAr4F) with chelating zwitterionic iminophosphonamide (NPN) ligands (Ph2P(NR)(NR'); a, R = R' = p-Tol; b, R = p-Tol, R' = Me; c, R = R' = Me) were synthesized and characterized by single-crystal X-ray diffraction. In the 16e̅ complexes 2, the rhodium (Rh) atom is efficiently stabilized by π-donation of unshared N electrons, thus hampering coordination of the external ligands and rendering the 18e̅ complexes labile. Due to low coordination enthalpy, the cationic 18e̅ monocarbonyl and pyridine adducts 2a·L are stable only at low temperatures. At room temperature, 2·CO adducts readily give stable carbonyl-carbamoyl complexes [(η5-C5Me5)Rh(CO){(CO(NR')Ph2P(NR)}]+ (4) formed as a result of CO insertion into the Rh-N bond, thus showing high nucleophilicity of the N atoms in 18e̅ complexes. High basicity of the Na+NPN- precursors caused side deprotonation of the η5-C5Me5 ligand during the synthesis of 1 that yields unstable fulvene Rh(I) complexes [(η4-C5Me4CH2)Rh{Ph2P(NR)(NR')2}] (3a,b). Complex 3a undergoes a facile reaction with isoprene to yield an unusual [(η5:η1-C5Me4(CH2)C(Me)═CHCH2)Rh(NPN)] complex─the first example of intermolecular 1,4-metallacycloaddition of diene to the Rh-fulvene complex.

The Reaction of Hydrogen Halides with Tetrahydroborate Anion and Hexahydro-closo-hexaborate Dianion.

The mechanism of the consecutive halogenation of the tetrahydroborate anion [BH4]- by hydrogen halides (HX, X = F, Cl, Br) and hexahydro-closo-hexaborate dianion [B6H6]2- by HCl via electrophile-induced nucleophilic substitution (EINS) was established by ab initio DFT calculations [M06/6-311++G(d,p) and wB97XD/6-311++G(d,p)] in acetonitrile (MeCN), taking into account non-specific solvent effects (SMD model). Successive substitution of H- by X- resulted in increased electron deficiency of borohydrides and changes in the character of boron atoms from nucleophilic to highly electrophilic. This, in turn, increased the tendency of the B-H bond to transfer a proton rather than a hydride ion. Thus, the regularities established suggested that it should be possible to carry out halogenation more selectively with the targeted synthesis of halogen derivatives with a low degree of substitution, by stabilization of H2 complex, or by carrying out a nucleophilic substitution of B-H bonds activated by interaction with Lewis acids (BL3).

Dichotomous Si-H Bond Activation by Alkoxide and Alcohol in Base-Catalyzed Dehydrocoupling of Silanes.

The activation of silanes in dehydrogenative coupling with alcohols under general base catalysis was studied experimentally (using multinuclear NMR, IR, and UV-visible spectroscopies) and computationally (at DFT M06/6-311++G(d,p) theory level) on the example of Ph4-nSiHn (n = 1-3) interaction with (CF3)2CHOH in the presence of Et3N. The effect of the phenyl groups' number and H- substitution by the electron-withdrawing (CF3)2CHO- group on Si-H bond hydricity (quantified as hydride-donating ability, HDA) and Lewis acidity of silicon atom (characterized by maxima of molecular electrostatic potential) was accessed. Our results show the coordination of Lewis base (Y = Me3N, ROH, OR-) leads to the increased hydricity of pentacoordinate hypervalent Ph4-nSi(Y)Hn complexes and a decrease of the reaction barrier for H2 release. The formation of tertiary complexes [Ph4-nSi(Y)Hn]···HOR is a critical prerequisite for the dehydrocoupling with alkoxides being ideal activators. The latter can be external or internal, generated by in situ HOR deprotonation. The mutual effect of tetrel interaction and dihydrogen bonding in tertiary complexes (RO-)Ph4-nSiHn···HOR leads to dichotomous activation of Si-H bond promoting the proton-hydride transfer and H2 release.

Stereoisomerism as an Origin of Different Reactivities of Ir(III) PC(sp3)P Pincer Catalysts.

Two stereoisomers of pentacoordinate iridium(III) hydridochloride with triptycene-based PC(sp3)P pincer ligand (1,8-bis(diisopropylphosphino)triptycene), 1 and 2, differ by the orientation of hydride ligand relative to the bridgehead ring of triptycene. According to DFT/B3PW91/def2-TZVP calculations performed, an equatorial Cl ligand can relatively easily change its position in 1, whereas that is not the case in 2. Both complexes 1 and 2 readily bind the sixth ligand to protect the empty coordination site. Variable temperature spectroscopic (NMR, IR, and UV-visible) studies show the existence of two isomers of hexacoordinate complexes 1·MeCN, 2·MeCN, and 2·Py with acetonitrile or pyridine coordinated trans to hydride or trans to metalated C(sp3), whereas only the equatorial isomer is found for 1·Py. These complexes are stabilized by various intramolecular noncovalent C-H···Cl interactions that are affected by the rotation of isopropyls or pyridine. The substitution of MeCN by pyridine is slow yielding axial Py complexes as kinetic products and the equatorial Py complexes as thermodynamic products with faster reactions of 1·L. Ultimately, that explains the higher activity of 1 in the catalytic alkenes' isomerization observed for allylbenzene, 1-octene, and pent-4-enenitrile, which proceeds as an insertion/elimination sequence rather than through the allylic mechanism.

Steric and Electronic Effect of Cp-Substituents on the Structure of the Ruthenocene Based Pincer Palladium Borohydrides.

Ruthenocene-based PCPtBu pincer ligands were used to synthesize novel pincer palladium chloride RcF[PCPtBu]PdCl (2a) and two novel palladium tetrahydroborates RcF[PCPtBu]Pd(BH4) (3a) and Rc*[PCPtBu]Pd(BH4) (3b), where RcF[PCPtBu] = κ3-{2,5-(tBu2PCH2)2-C5H2}Ru(CpF) (CpF = C5Me4CF3), and Rc*[PCPtBu] = κ3-{2,5-(tBu2PCH2)2C5H2}Ru(Cp*) (Cp* = C5Me5). These coordination compounds were characterized by X-ray, NMR and FTIR techniques. Analysis of the X-ray data shows that an increase of the steric bulk of non-metalated cyclopentadienyl ring in 3a and 3b relative to non-substituted Rc[PCPtBu]Pd(BH4) analogue (3c; where Rc[PCPtBu] = κ3-{2,5-(tBu2PCH2)2C5H2}Ru(Cp), Cp = C5H5) pushes palladium atom from the middle plane of the metalated Cp ring in the direction opposite to the ruthenium atom. This displacement increases in the order 3c < 3b < 3a following the order of the Cp-ring steric volume increase. The analysis of both X-ray and IR data suggests that BH4 ligand in both palladium tetrahydroborates 3a and 3b has the mixed coordination mode η1,2. The strength of the BH4 bond with palladium atom increases in the order Rc[PCPtBu]Pd(BH4) < Rc*[PCPtBu]Pd(BH4) < RcF[PCPtBu]Pd(BH4) that appears to be affected by both steric and electronic properties of the ruthenocene moiety.

Thermodynamic Hydricity of Small Borane Clusters and Polyhedral closo-Boranes.

Thermodynamic hydricity (HDAMeCN) determined as Gibbs free energy (ΔG°[H]-) of the H- detachment reaction in acetonitrile (MeCN) was assessed for 144 small borane clusters (up to 5 boron atoms), polyhedral closo-boranes dianions [BnHn]2-, and their lithium salts Li2[BnHn] (n = 5-17) by DFT method [M06/6-311++G(d,p)] taking into account non-specific solvent effect (SMD model). Thermodynamic hydricity values of diborane B2H6 (HDAMeCN = 82.1 kcal/mol) and its dianion [B2H6]2- (HDAMeCN = 40.9 kcal/mol for Li2[B2H6]) can be selected as border points for the range of borane clusters' reactivity. Borane clusters with HDAMeCN below 41 kcal/mol are strong hydride donors capable of reducing CO2 (HDAMeCN = 44 kcal/mol for HCO2-), whereas those with HDAMeCN over 82 kcal/mol, predominately neutral boranes, are weak hydride donors and less prone to hydride transfer than to proton transfer (e.g., B2H6, B4H10, B5H11, etc.). The HDAMeCN values of closo-boranes are found to directly depend on the coordination number of the boron atom from which hydride detachment and stabilization of quasi-borinium cation takes place. In general, the larger the coordination number (CN) of a boron atom, the lower the value of HDAMeCN.

Z-H Bond Activation in (Di)hydrogen Bonding as a Way to Proton/Hydride Transfer and H2 Evolution.

The ability of neutral transition-metal hydrides to serve as a source of hydride ion H- or proton H+ is well appreciated. The hydride ligands possessing a partly negative charge are proton accepting sites, forming a dihydrogen bond, M-Hδ- ⋅⋅⋅δ+ HX (M=transition metal or metalloid). On the other hand, some metal hydrides are able to serve as a proton source and give hydrogen bond of M-Hδ+ ⋅⋅⋅X type (X=organic base). In this paper we analyse recent works on transition-metal and boron hydrides showing i) how formation of an intermolecular complex between the reactants changes the Z-H (M-H and X-H) bond polarity and ii) what is the implication of such activation in the mechanisms of hydrides reactions.

Steric and Acidity Control in Hydrogen Bonding and Proton Transfer to trans-W(N2)2(dppe)2.

The interaction of trans-W(N2)2(dppe)2 (1; dppe = 1,2-bis(diphenylphosphino)ethane) with relatively weak acids (p-nitrophenol, fluorinated alcohols, CF3COOH) was studied by means of variable temperature IR and NMR spectroscopy and complemented by DFT/B3PW91-D3 calculations. The results show, for the first time, the formation of a hydrogen bond to the coordinated dinitrogen, W-N≡N···H-O, that is preferred over H-bonding to the metal atom, W···H-O, despite the higher proton affinity of the latter. Protonation of the core metal-the undesirable side step in the conversion of N2 to NH3-can be avoided by using weaker and, more importantly, bulkier acids.

Hydrogen and Dihydrogen Bonds in the Reactions of Metal Hydrides.

The dihydrogen bond-an interaction between a transition-metal or main-group hydride (M-H) and a protic hydrogen moiety (H-X)-is arguably the most intriguing type of hydrogen bond. It was discovered in the mid-1990s and has been intensively explored since then. Herein, we collate up-to-date experimental and computational studies of the structural, energetic, and spectroscopic parameters and natures of dihydrogen-bonded complexes of the form M-H···H-X, as such species are now known for a wide variety of hydrido compounds. Being a weak interaction, dihydrogen bonding entails the lengthening of the participating bonds as well as their polarization (repolarization) as a result of electron density redistribution. Thus, the formation of a dihydrogen bond allows for the activation of both the MH and XH bonds in one step, facilitating proton transfer and preparing these bonds for further transformations. The implications of dihydrogen bonding in different stoichiometric and catalytic reactions, such as hydrogen exchange, alcoholysis and aminolysis, hydrogen evolution, hydrogenation, and dehydrogenation, are discussed.

Coordinatively Labile 18-Electron Arene Ruthenium Iminophosphonamide Complexes.

The thermodynamics of chloride dissociation from the 18e arene ruthenium iminophosphonamides [(η6 -arene)RuCl{(R'N)2 PR2 }] (1 a-d) [previously known with arene=C6 Me6 , R=Ph, R'=p-Tol (a); R=Et, R'=p-Tol (b); R=Ph, R'=Me (c); and new with arene=p-cymene, R=Ph, R'=p-Tol (d)] was assessed in both polar and apolar solvents by variable-temperature UV/Vis, NMR, and 2D EXSY 1 H NMR methods, which highlighted the influence of the NPN ligand on the equilibrium parameters. The dissociation enthalpy ΔHd decreases with increasing electron-donating ability of the N- and P-substituents (1 a, 1 d>1 b>1 c) and solvent polarity, and this results in exothermic spontaneous dissociation of 1 c in polar solvents. The coordination of neutral ligands (MeCN, pyridine, CO) to the corresponding 16e complexes [(η6 -arene)Ru{(R'N)2 PR2 }]+ PF6- (2 a-d) is reversible; the stability of the 2⋅L adducts depends on the π-accepting ability of L. Carbonylation of 2 a and 2 d resulted in rare examples of cationic arene ruthenium carbonyl complexes (3 a, 3 d), while the monocarbonyl adduct derived from 2 c reacts further with a second equivalent of CO with conversion to carbonyl-carbamoyl complex 3 c, in which one CO molecule is inserted into the Ru-N bond. The new complexes 1 d, 2 d, 3 a, 3 c, and 3 d were isolated and structurally characterized.

Ammonia Borane Dehydrogenation Catalyzed by (κ4-EP3)Co(H) [EP3 = E(CH2CH2PPh2)3; E = N, P] and H2 Evolution from Their Interaction with NH Acids.

Two Co(I) hydrides containing the tripodal polyphosphine ligand EP3, (κ4-EP3)Co(H) [E(CH2CH2PPh2)3; E = N (1), P (2)], have been exploited as ammonia borane (NH3BH3, AB) dehydrogenation catalysts in THF solution at T = 55 °C. The reaction has been analyzed experimentally through multinuclear (11B, 31P{1H}, 1H) NMR and IR spectroscopy, kinetic rate measurements, and kinetic isotope effect (KIE) determination with deuterated AB isotopologues. Both complexes are active in AB dehydrogenation, albeit with different rates and efficiency. While 1 releases 2 equiv of H2 per equivalent of AB in ca. 48 h, with concomitant borazine formation as the final "spent fuel", 2 produces 1 equiv of H2 only per equivalent of AB in the same reaction time, along with long-chain poly(aminoboranes) as insoluble byproducts. A DFT modeling of the first AB dehydrogenation step has been performed, at the M06//6-311++G** level of theory. The combination of the kinetic and computational data reveals that a simultaneous B-H/N-H activation occurs in the presence of 1, after a preliminary AB coordination to the metal center. In 2, no substrate coordination takes place, and the process is better defined as a sequential BH3/NH3 insertion process on the initially formed [Co]-NH2BH3 amidoborane complex. Finally, the reaction of 1 and 2 with NH-acids [AB and Me2NHBH3 (DMAB)] has been followed via VT-FTIR spectroscopy (in the -80 to +50 °C temperature range), with the aim of gaining a deeper experimental understanding of the dihydrogen bonding interactions that are at the origin of the observed H2 evolution.

The Role of Weak Interactions in Strong Intermolecular M···Cl Complexes of Coinage Metal Pyrazolates: Spectroscopic and DFT Study.

The nondestructive reversible complexation of the macrocyclic group 11 metal pyrazolates {[3,5-(CF3)2Pz]M}3 (M = Cu(I), Ag(I)) to the halogen atom X = Cl, Br of η(3)-allyliron tricarbonyl halides (η(3)-2-R-C3H4)Fe(CO)3X is revealed by the variable-temperature spectroscopic (IR, NMR) study combined with density functional theory calculations. The composition of all complexes at room temperature is determined as 1:1. In the case of the [AgL]3 macrocycle, complexes 1:2 are observed at low temperature (<260 K). The complex's stability depends on the substituents in the allyl fragment and halide ligand as well as on the metal atom (Ag(I), Cu(I)) in the macrocycle. For bulky substituents (Me and Ph) the endo/exo equilibrium of the parent (η(3)-2-R-C3H4)Fe(CO)3X shifts upon the complex formation in favor of the exo isomer due to additional noncovalent interactions of the substituent with macrocycle.

Remarkable Structural and Electronic Features of the Complex Formed by Trimeric Copper Pyrazolate with Pentaphosphaferrocene.

According to spectroscopic (NMR, IR, UV/Vis) study, the interaction of pentaphosphaferrocene [Cp*Fe(η(5) -P5 )] with trimeric copper pyrazolate [(Cu{3,5-(CF3 )2 Pz})3 ] yields a new compound that is astonishingly stable in solution. Single-crystal X-ray analysis reveals unprecedented structural changes in the interacting molecules and the unique type of coordination [Cp*Fe(µ3 -η(5) :η(2) ,η(2) -P5 ){Cu(3,5-(CF3 )2 Pz)}3 ]. As a result of the 90° macrocycle folding, the copper atoms are able to behave both as a Lewis acid and as a Lewis base in the interaction with the cyclo-P5 ligand.

Dihydrogen bond intermediated alcoholysis of dimethylamine-borane in nonaqueous media.

Dimethylamine-borane (DMAB) acid/base properties, its dihydrogen-bonded (DHB) complexes and proton transfer reaction in nonaqueous media were investigated both experimentally (IR, UV/vis, NMR, and X-ray) and theoretically (DFT, NBO, QTAIM, and NCI). The effects of DMAB concentration, solvents polarity and temperature on the degree of DMAB self-association are shown and the enthalpy of association is determined experimentally for the first time (-ΔH°assoc = 1.5-2.3 kcal/mol). The first case of "improper" (blue-shifting) NH···F hydrogen bonds was observed in fluorobenzene and perfluorobenzene solutions. It was shown that hydrogen-bonded complexes are the intermediates of proton transfer from alcohols and phenols to DMAB. The reaction mechanism was examined computationally taking into account the coordinating properties of the reaction media. The values of the rate constants of proton transfer from HFIP to DMAB in acetone were determined experimentally [(7.9 ± 0.1) × 10(-4) to (1.6 ± 0.1) × 10(-3) mol(-1)·s(-1)] at 270-310 K. Computed activation barrier of this reaction ΔG(‡theor)298 K(acetone) = 23.8 kcal/mol is in good agreement with the experimental value of the activation free energy ΔG(‡exp)270 K = 21.1 kcal/mol.

Dihydrogen bonding in complex (PP3)RuH(η(1)-BH4) featuring two proton-accepting hydride sites: experimental and theoretical studies.

Combining variable-temperature infrared and NMR spectroscopic studies with quantum-chemical calculations (density functional theory (DFT) and natural bond orbital) allowed us to address the problem of competition between MH (M = transition metal) and BH hydrogens as proton-accepting sites in dihydrogen bond (DHB) and to unravel the mechanism of proton transfer to complex (PP3)RuH(η(1)-BH4) (1, PP3 = κ(4)-P(CH2CH2PPh2)3). Interaction of complex 1 with CH3OH, fluorinated alcohols of variable acid strength [CH2FCH2OH, CF3CH2OH, (CF3)2CHOH (HFIP), (CF3)3COH], and CF3COOH leads to the medium-strength DHB complexes involving BH bonds (3-5 kcal/mol), whereas DHB complexes with RuH were not observed experimentally. The two proton-transfer pathways were considered in DFT/M06 calculations. The first one goes via more favorable bifurcate complexes to BHterm and high activation barriers (38.2 and 28.4 kcal/mol in case of HFIP) and leads directly to the thermodynamic product [(PP3)RuHeq(H2)](+)[OR](-). The second pathway starts from the less-favorable complex with RuH ligand but shows a lower activation barrier (23.5 kcal/mol for HFIP) and eventually leads to the final product via the isomerization of intermediate [(PP3)RuHax(H2)](+)[OR](-). The B-Hbr bond breaking is the common key step of all pathways investigated.

Two active species from a single metal halide precursor: a case study of highly productive Mn-catalyzed dehydrogenation of amine-boranes via intermolecular bimetallic cooperation.

Metal-metal cooperation for inert bond activation is a ubiquitous concept in coordination chemistry and catalysis. While the great majority of such transformations proceed via intramolecular mode in binuclear complexes, to date only a few examples of intermolecular small molecule activation using usually bimetallic frustrated Lewis pairs (Mδ+⋯M'δ-) have been reported. We introduce herein an alternative approach for the intermolecular bimetallic cooperativity observed in the catalytic dehydrogenation of amine-boranes, in which the concomitant activation of N-H and B-H bonds of the substrate via the synergetic action of Lewis acidic (M+) and basic hydride (M-H) metal species derived from the same mononuclear complex (M-Br). It was also demonstrated that this system generated in situ from the air-stable Mn(i) complex fac-[(CO)3(bis(NHC))MnBr] and NaBPh4 shows high activity for H2 production from several substrates (Me2NHBH3, tBuNH2BH3, MeNH2BH3, NH3BH3) at low catalyst loading (0.1% to 50 ppm), providing outstanding efficiency for Me2NHBH3 (TON up to 18 200) that is largely superior to all known 3d-, s-, p-, f-block metal derivatives and frustrated Lewis pairs (FLPs). These results represent a step forward towards more extensive use of intermolecular bimetallic cooperation concepts in modern homogeneous catalysis.

Synergism of primary and secondary interactions in a crystalline hydrogen peroxide complex with tin.

Despite the significance of H2O2-metal adducts in catalysis, materials science and biotechnology, the nature of the interactions between H2O2 and metal cations remains elusive and debatable. This is primarily due to the extremely weak coordinating ability of H2O2, which poses challenges in characterizing and understanding the specific nature of these interactions. Herein, we present an approach to obtain H2O2-metal complexes that employs neat H2O2 as both solvent and ligand. SnCl4 effectively binds H2O2, forming a SnCl4(H2O2)2 complex, as confirmed by 119Sn and 17O NMR spectroscopy. Crystalline adducts, SnCl4(H2O2)2·H2O2·18-crown-6 and 2[SnCl4(H2O2)(H2O)]·18-crown-6, are isolated and characterized by X-ray diffraction, providing the complete characterization of the hydrogen bonding of H2O2 ligands including geometric parameters and energy values. DFT analysis reveals the synergy between a coordinative bond of H2O2 with metal cation and its hydrogen bonding with a second coordination sphere. This synergism of primary and secondary interactions might be a key to understanding H2O2 reactivity in biological systems.

Hydrogen bonding and proton transfer to ruthenium hydride complex CpRuH(dppe): metal and hydride dichotomy.

The combination of variable temperature (190-297 K) IR and NMR spectroscopy studies with quantum-chemical calculations at the DFT/B3PW91 and AIM level had the aim to determine the mechanism of proton transfer to CpRuH(dppe) (1, dppe = Ph(2)P(CH(2))(2)PPh(2)) and the structures of intermediates. Dihydrogen bond (DHB) formation was established in the case of interaction with weak proton donors like CF(3)CH(2)OH. Low-temperature protonation (at about 200 K) by stronger proton donors leads via DHB complex to the cationic nonclassical complex [CpRu(η(2)-H(2))(dppe)](+) (2). Thermodynamic parameters of DHB formation (for CF(3)CH(2)OH: ΔH°(HB) = -4.9 ± 0.2 kcal·mol(-1), ΔS°(HB) = -17.8 ± 0.7 cal·mol(-1)·K(-1)) and proton transfer (for (CF(3))(2)CHOH: ΔH°(PT) = -5.2 ± 0.3 kcal·mol(-1), ΔS°(PT) = -23 ± 1 cal·mol(-1)·K(-1)) were determined. Above 240 K 2 transforms into trans-[CpRu(H)(2)(dppe)](+) (3) yielding a mixture of 2 and 3 in 1:2 ratio. Kinetic analysis and activation parameters for the "[Ru(η(2)-H(2))](+) → trans-[Ru(H)(2)](+)" transformation indicate reversibility of this process in contrast to irreversible intramolecular isomerization of the Cp* analogue. Calculations show that the driving force of this process is greater stability (by 1.5 kcal·mol(-1) in ΔE scale) of the dihydride cation in comparison with the dihydrogen complex. The calculations of the potential energy profile indicate the low barrier for deprotonation of 2 suggesting that the formation of trans-[CpRu(H)(2)(dppe)](+) proceeds via deprotonation of [Ru(η(2)-H(2))](+) to DHB complex, formation of hydrogen bond with Ru atom and subsequent proton transfer to the metal site.

Directionality of dihydrogen bonds: the role of transition metal atoms.

A theoretical study on two series of electron-rich group 8 hydrides is carried out to evaluate involvement of the transition metal in dihydrogen bonding. To this end, the structural and electronic parameters are computed at the DFT/B3PW91 level for hydrogen-bonded adducts of [(PP(3))MH(2)] and [Cp*MH(dppe)] (M = Fe, Ru, Os; PP(3) = κ(4)-P(CH(2)CH(2)PPh(2))(3), dppe = κ(2)-Ph(2)PCH(2)CH(2)PPh(2)) with CF(3)CH(2)OH (TFE) as proton donor. The results are compared with those of adduct [Cp(2)NbH(3)]⋅TFE featuring a "pure" dihydrogen bond, and classical hydrogen bonds in pyridine⋅TFE and Me(3)N⋅TFE. Deviation of the H⋅⋅⋅H-A fragment from linearity is shown to originate from the metal participation in dihydrogen bonding. The latter is confirmed by the electronic parameters obtained by NBO and AIM analysis. Considered together, orbital interaction energies and hydrogen bond ellipticity are salient indicators of this effect and allow the MH⋅⋅⋅HA interaction to be described as a bifurcate hydrogen bond. The impact of the M⋅⋅⋅HA interaction is shown to increase on descending the group, and this explains the experimental trends in mechanisms of proton-transfer reactions via MH⋅⋅⋅HA intermediates. Strengthening of the M⋅⋅⋅H interaction in the case of electron-rich 5d metal hydrides leads to direct proton transfer to the metal atom.