Biomechanical Phenotyping of Chronic Low Back Pain: Protocol for BACPAC.

OBJECTIVE: Biomechanics represents the common final output through which all biopsychosocial constructs of back pain must pass, making it a rich target for phenotyping. To exploit this feature, several sites within the NIH Back Pain Consortium (BACPAC) have developed biomechanics measurement and phenotyping tools. The overall aims of this article were to: 1) provide a narrative review of biomechanics as a phenotyping tool; 2) describe the diverse array of tools and outcome measures that exist within BACPAC; and 3) highlight how leveraging these technologies with the other data collected within BACPAC could elucidate the relationship between biomechanics and other metrics used to characterize low back pain (LBP). METHODS: The narrative review highlights how biomechanical outcomes can discriminate between those with and without LBP, as well as among levels of severity of LBP. It also addresses how biomechanical outcomes track with functional improvements in LBP. Additionally, we present the clinical use case for biomechanical outcome measures that can be met via emerging technologies. RESULTS: To answer the need for measuring biomechanical performance, our "Results" section describes the spectrum of technologies that have been developed and are being used within BACPAC. CONCLUSION AND FUTURE DIRECTIONS: The outcome measures collected by these technologies will be an integral part of longitudinal and cross-sectional studies conducted in BACPAC. Linking these measures with other biopsychosocial data collected within BACPAC increases our potential to use biomechanics as a tool for understanding the mechanisms of LBP, phenotyping unique LBP subgroups, and matching these individuals with an appropriate treatment paradigm.

Toward the Identification of Distinct Phenotypes: Research Protocol for the Low Back Pain Biological, Biomechanical, and Behavioral (LB3P) Cohort Study and the BACPAC Mechanistic Research Center at the University of Pittsburgh.

As a member of the Back Pain Consortium (BACPAC), the University of Pittsburgh Mechanistic Research Center's research goal is to phenotype chronic low back pain using biological, biomechanical, and behavioral domains using a prospective, observational cohort study. Data will be collected from 1,000 participants with chronic low back pain according to BACPAC-wide harmonized and study-specific protocols. Participation lasts 12 months with one required in person baseline visit, an optional second in person visit for advanced biomechanical assessment, and electronic follow ups at months 1, 2, 3, 4, 5, 6, 9, and 12 to assess low back pain status and response to prescribed treatments. Behavioral data analysis includes a battery of patient-reported outcomes, social determinants of health, quantitative sensory testing, and physical activity. Biological data analysis includes omics generated from blood, saliva, and spine tissue. Biomechanical data analysis includes a physical examination, lumbopelvic kinematics, and intervertebral kinematics. The statistical analysis includes traditional unsupervised machine learning approaches to categorize participants into groups and determine the variables that differentiate patients. Additional analysis includes the creation of a series of decision rules based on baseline measures and treatment pathways as inputs to predict clinical outcomes. The characteristics identified will contribute to future studies to assist clinicians in designing a personalized, optimal treatment approach for each patient.

Invincible honor: masculine honor, perceived invulnerability, and risky decision-making.

Masculine honor ideology is characterized by the cultivation, maintenance, and defense of reputations for toughness, bravery, and strength. The link between masculine honor endorsement and increased risk-taking - especially an increased tolerance for and even expectation of violence - is well-established in the literature. However, little empirical research has examined what factors might explain this relationship. This study investigates perceived invulnerability, the cognitive bias that one is immune to threats, as a mediator in the relationship between masculine honor ideology and risky decision-making. Results show moderate support for this relationship's existence. These findings elaborate on previous research between honor and specific risky decisions by demonstrating honor to instill cognitive biases in its adherents that make them more tolerant of risk, and thus more likely to decide to engage in risky behaviors. The implications of these findings for interpreting previous research, guiding future research, and pursuing specific educational and policy-based efforts are discussed.

Evaluation of a Smart Knee Brace for Range of Motion and Velocity Monitoring during Rehabilitation Exercises and an Exergame.

Anterior cruciate ligament (ACL) injuries often require a lengthy duration of rehabilitation for patients to return to their prior level of function. Adherence to rehabilitation during this prolonged period can be subpar due to the treatment duration and poor adherence to home exercises. This work evaluates whether a smart instrumented knee brace system is capable of monitoring knee range of motion and velocity during a series of common knee rehabilitation exercises and an exergame. A total of 15 healthy participants completed a series of common knee rehabilitation exercises and played an exergame while wearing a smart instrumented knee brace. The range of motion (ROM) and velocity of the knee recorded by the knee brace was compared to a reference optoelectronic system. The results show good agreement between the knee brace system and the reference system for all exercises performed. Participants were able to quickly learn how to play the exergame and scored well within the game. The system investigated in this study has the potential to allow rehabilitation to occur outside of the clinic with the use of remote monitoring, and improve adherence and outcomes through the use of an exergame.

A Portable System for Remote Rehabilitation Following a Total Knee Replacement: A Pilot Randomized Controlled Clinical Study.

Rehabilitation has been shown to improve functional outcomes following total knee replacement (TKR). However, its delivery and associated costs are highly variable. The authors have developed and previously validated the accuracy of a remote (wearable) rehabilitation monitoring platform (interACTION). The present study's objective was to assess the feasibility of utilizing interACTION for the remote management of rehabilitation after TKR and to determine a preliminary estimate of the effects of the interACTION system on the value of rehabilitation. Specifically, we tested post-operative outpatient rehabilitation supplemented with interACTION (n = 13) by comparing it to a standard post-operative outpatient rehabilitation program (n = 12) using a randomized design. Attrition rates were relatively low and not significantly different between groups, indicating that participants found both interventions acceptable. A small (not statistically significant) decrease in the number of physical therapy visits was observed in the interACTION Group, therefore no significant difference in total cost could be observed. All patients and physical therapists in the interACTION Group indicated that they would use the system again in the future. Therefore, the next steps are to address the concerns identified in this pilot study and to expand the platform to include behavioral change strategies prior to conducting a full-scale randomized controlled trial. Trial registration: ClinicalTrials.gov NCT02646761 "interACTION: A Portable Joint Function Monitoring and Training System for Remote Rehabilitation Following TKA" 6 January 2016.

Verification of a Portable Motion Tracking System for Remote Management of Physical Rehabilitation of the Knee.

Rehabilitation following knee injury or surgery is critical for recovery of function and independence. However, patient non-adherence remains a significant barrier to success. Remote rehabilitation using mobile health (mHealth) technologies have potential for improving adherence to and execution of home exercise. We developed a remote rehabilitation management system combining two wireless inertial measurement units (IMUs) with an interactive mobile application and a web-based clinician portal (interACTION). However, in order to translate interACTION into the clinical setting, it was first necessary to verify the efficacy of measuring knee motion during rehabilitation exercises for physical therapy and determine if visual feedback significantly improves the participant's ability to perform the exercises correctly. Therefore, the aim of this study was to verify the accuracy of the IMU-based knee angle measurement system during three common physical therapy exercises, quantify the effect of visual feedback on exercise performance, and understand the qualitative experience of the user interface through survey data. A convenience sample of ten healthy control participants were recruited for an IRB-approved protocol. Using the interACTION application in a controlled laboratory environment, participants performed ten repetitions of three knee rehabilitation exercises: heel slides, short arc quadriceps contractions, and sit-to-stand. The heel slide exercise was completed without feedback from the mobile application, then all exercises were performed with visual feedback. Exercises were recorded simultaneously by the IMU motion tracking sensors and a video-based motion tracking system. Validation showed moderate to good agreement between the two systems for all exercises and accuracy was within three degrees. Based on custom usability survey results, interACTION was well received. Overall, this study demonstrated the potential of interACTION to measure range of motion during rehabilitation exercises for physical therapy and visual feedback significantly improved the participant's ability to perform the exercises correctly.

Mechanical role of the posterior column components in the cervical spine.

PURPOSE: To quantify the mechanical role of posterior column components in human cervical spine segments. METHODS: Twelve C6-7 segments were subjected to resection of (1) suprasinous/interspinous ligaments (SSL/ISL), (2) ligamenta flavum (LF), (3) facet capsules, and (4) facets. A robot-based testing system performed repeated flexibility testing of flexion-extension (FE), axial rotation (AR), and lateral bending (LB) to 2.5Nm and replayed kinematics from intact flexibility tests for each state. Range-of-motion, stiffness, moment resistance and resultant forces were calculated. RESULTS: The LF contributes largely to moment resistance, particularly in flexion. Facet joints were primary contributors to AR and LB mechanics. Moment/force responses were more sensitive and precise than kinematic outcomes. CONCLUSIONS: The LF is mechanically important in the cervical spine; its injury could negatively impact load distribution. Damage to facets in a flexion injury could lead to AR or LB hypermobility. Quantifying the contribution of spinal structures to moment resistance is a sensitive, precise process for characterizing structural mechanics.

Experimental Execution of the Simulated Pivot-Shift Test: A Systematic Review of Techniques.

PURPOSE: To conduct a systematic review to identify and summarize the various techniques that have been used to simulate the pivot-shift test in vitro. METHODS: Medline, Embase, and the Cochrane Library were screened for studies involving the simulated pivot-shift test in human cadaveric knees published between 1946 and May 2014. Study parameters including sample size, study location, simulated pivot-shift technique, loads applied, knee flexion angles at which simulated pivot shift was tested, and kinematic evaluation tools were extracted and analyzed. RESULTS: Forty-eight studies reporting simulated pivot-shift testing on 627 cadaveric knees fulfilled the criteria. Reviewer inter-rater agreement for study selection showed a κ score of 0.960 (full-text review). Twenty-seven studies described the use of internal rotation torque, with a mean of 5.3 Nm (range, 1 to 18 Nm). Forty-seven studies described the use of valgus torque, with a mean of 8.8 Nm (range, 1 to 25 Nm). Four studies described the use of iliotibial tract tension, ranging from 10 to 88 N. Regarding static simulated pivot-shift test techniques, 100% of the studies performed testing at 30° of knee flexion, and the most tested range of motion in the continuous tests was 0° to 90°. Anterior tibial translation was the most analyzed parameter during the simulated pivot-shift test, being used in 45 studies. In 22% of the studies, a robotic system was used to simulate the pivot-shift test. Robotic systems were shown to have better control of the loading system and higher tracking system accuracy. CONCLUSIONS: This study provides a reference for investigators who desire to apply simulated pivot shift in their in vitro studies. It is recommended to simulate the pivot-shift test using a 10-Nm valgus torque and 5-Nm internal rotation torque. Knee flexion of 30° is mandatory for testing. LEVEL OF EVIDENCE: Level IV, systematic review of basic science studies.

Needle puncture in rabbit functional spinal units alters rotational biomechanics.

STUDY DESIGN: An in vitro biomechanical study for rabbit lumbar functional spinal units (FSUs) using a robot-based spine testing system. OBJECTIVE: To elucidate the effect of annular puncture with a 16 G needle on mechanical properties in flexion/extension, axial rotation, and lateral bending. SUMMARY OF BACKGROUND DATA: Needle puncture of the intervertebral disk has been shown to alter mechanical properties of the disk in compression, torsion, and bending. The effect of needle puncture in FSUs, where intact spinal ligaments and facet joints may mitigate or amplify these changes in the disk, on spinal motion segment stability subject to physiological rotations remains unknown. METHODS: Rabbit FSUs were tested using a robot testing system whose force/moment and position precision were assessed to demonstrate system capability. Flexibility testing methods were developed by load-to-failure testing in flexion/extension, axial rotation, and lateral bending. Subsequent testing methods were used to examine a 16 G needle disk puncture and No. 11 blade disk stab (positive control for mechanical disruption). Flexibility testing was used to assess segmental range-of-motion (degrees), neutral zone stiffness (N m/degrees) and width (degrees and N m), and elastic zone stiffness before and after annular injury. RESULTS: The robot-based system was capable of performing flexibility testing on FSUs-mean precision of force/moment measurements and robot system movements were <3% and 1%, respectively, of moment-rotation target values. Flexibility moment targets were 0.3 N m for flexion and axial rotation and 0.15 N m for extension and lateral bending. Needle puncture caused significant (P<0.05) changes only in flexion/extension range-of-motion and neutral zone stiffness and width (N m) compared with preintervention. No. 11 blade-stab significantly increased range-of-motion in all motions, decreased neutral zone stiffness and width (N m) in flexion/extension, and increased elastic zone stiffness in flexion and lateral bending. CONCLUSIONS: These findings suggest that disk puncture and stab can destabilize FSUs in primary rotations.

Republished research: Impact of autologous blood injections in treatment of mid-portion Achilles tendinopathy: double blind randomised controlled trial.

STUDY QUESTION: Do peritendinous autologous blood injections improve pain and function in people with mid-portion Achilles tendinopathy? SUMMARY ANSWER: The administration of two unguided peritendinous autologous blood injections one month apart, in addition to a standardised eccentric training programme, provides no additional benefit in the treatment of mid-portion Achilles tendinopathy. WHAT IS KNOWN AND WHAT THIS PAPER ADDS: Several studies have suggested that injection of autologous blood can help in the treatment of various tendinopathies. There is a lack of high quality evidence showing relevant benefit for autologous blood injections, particularly in the management of mid-portion Achilles tendinopathy. We found no additional reduction in pain or improvement in function when these injections were combined with an eccentric calf training programme.

Functional range of motion of the cervical spine in cervical fusion patients during activities of daily living.

Following cervical spine fusion there is a reduction in maximum range of motion (ROM) but how this impacts activity of daily living (ADLs) and quality of life is unknown. This study's purpose is to quantify maximum and functional cervical spine ROM in patients with multi-level cervical fusion (>3 levels) compared to controls during ADLs and to correlate functional range of motion with scores from patient reported outcomes measures (PROs) including the Comparative Pain Scale (CPS), Fear Avoidance Belief Questionnaire (FABQ), and Neck Disability Index (NDI). An inertial measurement unit (IMU) system quantified ROM during ADLs in the extension/flexion, lateral bending, and axial rotation directions of motion. The reliability of this system was compared to standard optical motion tracking. Fourteen participants (8 females, age = 60.0 years (18.7) (median, (interquartile range)) with a history of multi-level cervical fusion (years post-op 0.9 (0.7)) were compared to 16 controls (13 females, age = 52.1 years (15.8)). PROs were collected for each participant. Fusion participants had significantly decreased maximum ROM in all directions of motion. Fusion participants had decreased ROM for some ADLs (backing up a car, using a phone, donning socks, negotiating stairs). CPS, FABQ, and NDI scores were significantly increased in fusion participants. Reductions in two activities (backing up a car, stair negotiation) correlated with a combination of increased PRO scores. Cervical fusion decreases maximum ROM and is correlated with increased PROs in some ADLs, however there is minimal impact on functional ROM. Investigation into velocity and acceleration may yield categorization of pathologic movement.

Percutaneous lumbar annular puncture: A rat model to study intervertebral disc degeneration and pain-related behavior.

Background: Previous animal models of intervertebral disc degeneration (IDD) rely on open surgical approaches, which confound the degenerative response and pain behaviors due to injury to surrounding tissues during the surgical approach. To overcome these challenges, we developed a minimally invasive percutaneous puncture procedure to induce IDD in a rat model. Methods: Ten Fischer 344 male rats underwent percutaneous annular puncture of lumbar intervertebral discs (IVDs) at L2-3, L3-4, and L4-5. Ten unpunctured rats were used as controls. Magnetic resonance imagings (MRIs), serum biomarkers, and behavioral tests were performed at baseline and 6, 12, and 18 weeks post puncture. Rats were sacrificed at 18 weeks and disc histology, immunohistochemistry, and glycosaminoglycan (GAG) assays were performed. Results: Punctured IVDs exhibited significant reductions in MRI signal intensity and disc volume. Disc histology, immunohistochemistry, and GAG assay results were consistent with features of IDD. IVD-punctured rats demonstrated significant changes in pain-related behaviors, including total distance moved, twitching frequency, and rearing duration. Conclusions: This is the first reported study of the successful establishment of a reproducible rodent model of a percutaneous lumbar annular puncture resulting in discogenic pain. This model will be useful to test therapeutics and elucidate the basic mechanisms of IDD and discogenic pain.

Perspectives on the Gamification of an Interactive Health Technology for Postoperative Rehabilitation of Pediatric Anterior Cruciate Ligament Reconstruction: User-Centered Design Approach.

BACKGROUND: Pediatric and adolescent athletes are a large demographic undergoing anterior cruciate ligament reconstruction (ACL-R). Postoperative rehabilitation is critical, requiring patients to complete home exercise programs (HEPs). To address obstacles to HEP adherence, we developed an interactive health technology, interACTION (iA), to monitor knee-specific rehabilitation. iA is a web-based platform that incorporates wearable motion sensors and a mobile app that provides feedback and allows remote monitoring. The Wheel of Sukr is a gamification mechanism that includes numerous behavioral elements. OBJECTIVE: This study aims to use a user-centered design process to incorporate behavioral change strategies derived from self-management theory into iA using the Wheel of Sukr, with the aim of influencing patient behavior. METHODS: In total, 10 athletes aged 10-18 years with a history of ACL-R were included in this study. Patients were between 4 weeks and 1 year post-ACL-R. Participants underwent a 60-minute triphasic interview. Phase 1 focused on elements of gaming that led to high participation and information regarding surgery and recovery. In phase 2, participants were asked to think aloud and rank cards representing the components of the Wheel of Sukr in order of interest. In phase 3, the patients reviewed the current version of iA. Interviews were recorded, transcribed, and checked for accuracy. Qualitative content analysis segmented the data and tagged meaningful codes until descriptive redundancy was achieved; next, 2 coders independently coded the data set. These elements were categorized according to the Wheel of Sukr framework. The mean age of participants was 12.8 (SD 1.32) years, and 70% (7/10) were female. Most participants (7/10, 70%) reported attending sessions twice weekly. All patients were prescribed home exercises. Self-reported HEP compliance was 75%-100% in 40% (4/10), 50%-75% in 40% (4/10), and 25%-50% of prescribed exercises in 20% (2/10) of the participants. RESULTS: The participants responded positively to an app that could track home exercises. Desirable features included exercise demonstrations, motivational components, and convenience. The participants listed sports specificity, competition, notifications, reminders, rewards, and social aspects of gameplay as features to incorporate. In the Wheel of Sukr card sort exercise, motivation was ranked first; self-management, second; and growth, esteem, and fun tied for the third position. The recommended gameplay components closely followed the themes from the Wheel of Sukr card sort activity. CONCLUSIONS: The participants believe iA is a helpful addition to recovery and want the app to include exercise movement tracking and encouragement. Despite the small number of participants, thematic saturation was reached, suggesting the sample was sufficient to obtain a representative range of perspectives. Future work will implement motivation; self-management; and growth, confidence, and fun in the iA user experience. Young athlete ACL-R patients will complete typical clinical scenarios using increasingly developed prototypes of the gamified iA in a controlled setting.

Subjective and Objective Measures in Assessing Neck Disability and Pain in Head and Neck Cancer.

OBJECTIVE/HYPOTHESIS: The intensification of treatment for head and neck cancers (HNCs) has created a cohort of patients living with short- and long-term comorbidities and functional deficits. This study aimed to determine whether there is a relationship between patient-reported outcomes (PROs) and objective measures of neck function in survivors of HNCs. STUDY DESIGN: Cross-sectional study. METHODS: Thirty-one subjects (aged 64 ± 8.7 years; 28 males and three females) were recruited and completed the Neck Disability Index (NDI) and a numeric pain scale. At the same visit, subjects were fitted with two portable motion sensors to collect range of motion (ROM) and velocity data. Differences between ROM, velocity, and PRO subgroups were assessed using a one-tailed t test (*P < .05). The Pearson correlation coefficient (r) was calculated between the NDI values and the ROM and velocity values for each motion. RESULTS: A moderate correlation (r = 0.507) was observed between NDI and neck pain. Patients with no disability according to the NDI had significantly higher ROM and velocity than patients with mild to moderate disability. Velocity in all degrees of freedom (axial rotation, flexion and extension, and lateral bending) was significantly lower for patients who perceived higher levels of neck pain and neck disability. CONCLUSIONS: This study notes that patients who report neck disability and pain have more limited ROM and velocity following HNC treatment. These data may improve treatment planning and care delivery by facilitating an understanding of the experiences of HNC survivors and the pathophysiology that must be targeted to address their psychosocial and functional deficits. LEVEL OF EVIDENCE: 4 Laryngoscope, 131:2015-2022, 2021.

Assessing the biofidelity of in vitro biomechanical testing of the human cervical spine.

In vitro biomechanical studies of the osteoligamentous spine are widely used to characterize normal biomechanics, identify injury mechanisms, and assess the effects of degeneration and surgical instrumentation on spine mechanics. The objective of this study was to determine how well four standards in vitro loading paradigms replicate in vivo kinematics with regards to the instantaneous center of rotation and arthrokinematics in relation to disc deformation. In vivo data were previously collected from 20 asymptomatic participants (45.5 ± 5.8 years) who performed full range of motion neck flexion-extension (FE) within a biplane x-ray system. Intervertebral kinematics were determined with sub-millimeter precision using a validated model-based tracking process. Ten cadaveric spines (51.8 ± 7.3 years) were tested in FE within a robotic testing system. Each specimen was tested under four loading conditions: pure moment, axial loading, follower loading, and combined loading. The in vivo and in vitro bone motion data were directly compared. The average in vitro instant center of rotation was significantly more anterior in all four loading paradigms for all levels. In general, the anterior and posterior disc heights were larger in the in vitro models than in vivo. However, after adjusting for gender, the observed differences in disc height were not statistically significant. This data suggests that in vitro biomechanical testing alone may fail to replicate in vivo conditions, with significant implications for novel motion preservation devices such as cervical disc arthroplasty implants.

Preliminary validation of a mobile force Sensing device for clinical and telerehabilitation.

Muscle strength and force production are important measures of patient progress during physical rehabilitation. Reliable and objective measurements are important to ascertain throughout rehabilitation. Current methods-manual muscle testing, electromechanical dynamometer, and hand-held dynamometer-are accurate and reliable, but have limitations that prevent wide implementation. As healthcare systems adapt to more patient-centered outcome models, changes to the delivery of rehabilitation, whether at-home or in the clinic, must also change to become more cost effective and accessible and provide quantifiable information regarding patient progress. We developed a novel Force Sensing (FoSe) device to quantify either tensile or compressive isometric muscle strength. The device was tested in a laboratory setting with healthy participants (n = 32) and compared to the commonly used hand-held dynamometer (HHD). Participants used both devices to perform several common isometric muscle tests including: hip abduction, knee extension, knee flexion, shoulder external rotation, and shoulder internal rotation. Compared to the HHD, FoSe was found to be an accurate and reliable measurement of force production. Intraclass Correlation Coefficients ranged from 0.58 to 0.89 without a magnitude dependent variation in force measurement. A second round of clinical testing with a patient population is warranted to determine FoSe's ability to measure clinically relevant asymmetry and progress over time. Further usability testing also needs to be conducted to determine the adequacy of FoSe for at-home use by both patients and clinicians.

Biomechanical contribution of the alar ligaments to upper cervical stability.

Acute and chronic whiplash-associated disorders pose a significant healthcare burden due to chronic pain, which is associated with upper cervical instability resulting from ligamentous injury. No standard measure exists for diagnosing alar ligament injury and imaging findings vary widely. Multiple physical examination maneuvers are used to diagnose alar ligament injury including the C2 Spinous Kick, Flexion-Rotation, and Bending-Rotation tests. The objective of the current study was to determine the mechanical contribution of the alar ligaments to upper cervical stability and quantify the biomechanical changes seen during simulated clinical examinations after alar ligament injury. Eight cadaveric C0-C3 specimens were evaluated using a robotic testing system. Range of motion and moment at the end of intact specimen replay were the primary outcomes. Clinical examinations were simulated by rotation through two axes as performed during physical examination. Intact, unilateral and bilateral alar ligament injury states were tested. Unilateral alar ligament injury led to significant increases in lateral bending (12.0 ± 7.2%, p < 0.05), axial rotation (4.1 ± 2.4%, p < 0.05), and flexion-extension (5.3 ± 4.3%, p < 0.05) compared with intact specimens. The alar ligaments also contributed to resistance to intact motion in extension (13.4 ± 6.6%, p < 0.05), flexion (4.4 ± 2.2%, p < 0.05), axial rotation (19.3 ± 2.7%, p < 0.05), and lateral bending (16.0 ± 2.8%, p < 0.05). The C2 Spinous Kick Test showed the largest percentage change (-23.0 ± 14.8%), and the Bending-Rotation Test towards the side of injury significantly increased axial rotation by the largest absolute magnitude (5.5° ± 5.1°). Overall, quantifiable changes to motion measured during simulated physical examinations were found, but the ability of a clinician to feel these changes remains unknown.

Associations between nematode larval challenge and gastrointestinal tract size that affect carcass productivity in sheep.

Effects of gastrointestinal parasitism on sheep productivity are usually described using live weight change, however carcass productivity is more accurately described using dressing percentage (carcass weight as a proportion of live weight). This experiment had a 2x2x2 factorial design whereby 10-month-old Merino wethers were fed lucerne (Medicago sativa) diets (fresh lucerne or lucerne chaff) with 2 levels of carboxymethycellulose (CMC) inclusion (0% or 8% CMC) and nematode larval challenge (no larval challenge or 10,000 Teladorsagia circumcincta and 10,000 Trichostrongylus colubriformis per week). Sheep were weighed and euthanased 50 or 51 days after larval challenge and CMC supplementation commenced. Weight of the carcass (hot standard carcass weight) and gastrointestinal organs (full and empty) were recorded and expressed as a proportion of live weight. Larval challenged sheep had a worm egg count (mean+/-standard error) of 173+/-38 eggs per gram of faeces and total worm count of 30,237+/-2013 at slaughter. Larval challenged sheep had 1.3% lower dressing percentage (p=0.048), and 2% heavier full (p=0.007) and 1.2% heavier empty gastrointestinal tracts (p=0.012) compared to unchallenged sheep. There was no effect of CMC inclusion or lucerne type (fresh or chaff) on gastrointestinal tract weight or dressing percentage. Larval challenged sheep had 1.1% heavier full (p<0.001) and 0.6% heavier empty (p<0.001) small intestines, and 0.6% heavier full (p=0.005) and 0.3% heavier empty (p=0.026) large intestines compared to unchallenged sheep. Use of live weight change or other measures based on live weight (e.g. feed conversion efficiency) to assess the impact of nematode challenge in sheep may underestimate carcass productivity losses associated with larval challenge in sheep even at moderate levels of larval intake and without overt clinical signs of parasitism. Measurement of carcass weight and/or lean meat yield may better reflect the true economic effects of parasitism in sheep.

Biomechanical contributions of upper cervical ligamentous structures in Type II odontoid fractures.

Fractures of the odontoid present frequently in spinal trauma, and Type II odontoid fractures, occurring at the junction of the odontoid process and C2 vertebrae, represent the bulk of all traumatic odontoid fractures. It is currently unclear what soft-tissue stabilizers contribute to upper cervical motion in the setting of a Type II odontoid fracture, and evaluation of how concomitant injury contributes to cervical stability may inform surgical decision-making as well as allow for the creation of future, accurate, biomechanical models of the upper cervical spine. The objective of the current study was to determine the contribution of soft-tissue stabilizers in the upper cervical spine following a Type II odontoid fracture. Eight cadaveric C0-C2 specimens were evaluated using a robotic testing system with motion tracking. The unilateral facet capsule (UFC) and anterior longitudinal ligament (ALL) were serially resected to determine their biomechanical role following odontoid fracture. Range of motion (ROM) and moment at the end of intact specimen replay were the primary outcomes. We determined that fracture of the odontoid significantly increases motion and decreases resistance to intact motion for flexion-extension (FE), axial rotation (AR), and lateral bending (LB). Injury to the UFC increased AR by 3.2° and FE by 3.2°. ALL resection did not significantly increase ROM or decrease end-point moment. The UFC was determined to contribute to 19% of intact flexion resistance and 24% of intact AR resistance. Overall, we determined that Type II fracture of the odontoid is a significant biomechanical destabilizer and that concurrent injury to the UFC further increases upper cervical ROM and decreases resistance to motion in a cadaveric model of traumatic Type II odontoid fractures.