Origanum Grosii Extracts as Novel Eco-Friendly Corrosion Inhibitors for Mild Steel In HCl Medium.

Two green inhibitors extracted from an endemic species (Origanum grosii (Og)) using two solvents of different polarity (water and ethanol), OgW (aqueous extract) and OgE (ethanolic extract), were used for the anticorrosion of mild steel (M steel) in a 1 M HCl medium. Anticorrosive performance of OgW and OgE was assessed using standard electrochemical techniques, EIS/PDP measurements, weight loss method and SEM/EDX surface analysis. The results show that OgW achieves a maximum inhibition efficiency of 92 % and that the extract in aqueous medium (more polar) is more efficient than the extract in ethanolic medium (less polar). Both extracts act as mixed inhibitors and their corrosion process is predominantly governed by a charge transfer. Concentration and temperature effect was studied and shown that they are two antagonistic parameters for the evolution of inhibitory effectiveness of both OgW and OgE. The adsorption isotherms of the two inhibitors OgE and OgW obey to the Langmuir adsorption model. Moreover, the examination of SEM images and EDX spectra support a deposit of both extracts on the metal surface by an adsorption phenomenon. Besides, theoretical approach of the molecular structures of the major compounds M-OgW and M-OgE and inhibition efficiency was examined via DFT calculations and molecular dynamics simulations and it was consistent with the experimental findings.

Experimental and theoretical insights into Artemisia Stems aqueous extract as a sustainable and eco-friendly corrosion inhibitor for mild steel in 1 M HCl environment.

The present research demonstrates an innovative investigation of environmentally friendly mild steel (M-steel) corrosion inhibition using the artemisia stems aqueous extract (ASAEx) as an inhibitor in hydrochloric acid 1 M. The standard extraction technique of hydrodistillation was used for producing the aqueous solutions of ASAEx. To assess the ratios of the chemical components, phytochemical screening was used to identify the stems of this plant. We used a variety of methods and techniques in our research on corrosion inhibition, including weight loss measures, surface analysis methods like XPS and SEM/EDS, electrochemical testing like PDP and EIS, as well as computational lead compound evaluation. Maximum inhibitory efficacy was achieved with 400 mg/L ASAEx in 1 M HCl at 303 K, i.e. 90%. The PDP investigation verified the mixed-kind inhibitor status of the ASAEx extract. To describe the surface of M-steel, fitting and synthetic data were used to identify a constant phase element (CPE). SEM surface analysis was also used to detect the ASAEx effect on the surface of M-steel. X-ray photoelectron spectroscopy (XPS) analysis shows the presence of trace molecules of ASAEx on M-steel surface characterizing the bands in Maj-ASAEx (major compound of ASAEx). Density functional theory (DFT) and molecular dynamics simulations (MDs) were used in computational chemistry to clarify the adsorption mechanism and inhibitory impact.

Citrullus colocynthis fruit extract as effective eco-friendly corrosion inhibitor in a hydrochloric acid pickling medium for carbon steel by using both experimental and theoretical studies.

The present study focuses on an environmental approach based on the use of an eco-friendly corrosion inhibitor from the Citrullus colocynthis fruit extract for enhancement corrosion resistance of carbon steel (C-S) in acid medium as an alternative to various organic and non-organic chemical inhibitors. The evaluation of the inhibition properties of the fruit methanolic extract of Citrullus colocynthis (CCE) were performed in molar hydrochloric acid (1 M HCl) medium using gravimetric and electrochemical (potentiodynamic polarization and AC impedance) techniques as well as surface analyses. CCE is rich in amino acids, mainly citrulline and ß-(pyrazo-1-yl)-L-analine molecules. Based on the weight loss evaluation, the results demonstrated that this plant extract acts as an effective corrosion inhibitor and a protection level of 93.6% was attained at 500 ppm of CCE after 6 h of metal exposure at 303 K. According to polarization curves, CCE functions as a mixed-type inhibitor. In addition, AC impedance analyses have shown that the incorporation of CCE into the corrosive solution leads to a decrease in load capacity, while improving the charge/discharge function at the interface. This suggests the possibility of the formation of an adsorbed layer on the C-S surface. In addition, scanning electron microscope (SEM) observation, contact angle measurements, and Fourier-transform infrared spectroscopy (FTIR) analyses supported the development of a protective film over CS substrate surface afterwards addition of CCE. Langmuir and/or Temkin isotherms can be used to characterize the adsorption of this organic inhibitor on the C-S surface. X-ray photoelectron spectroscopy (XPS) has revealed that the inhibiting effect of CCE on the corrosion of C-S in 1 M HCl solution is mainly controlled by a chemisorption process and the inhibitive layer is composed of an iron oxide/hydroxide mixture where CCE molecules are incorporated. In order to understand the relationship between the molecular structure and anti-corrosion effectiveness of these inhibitor molecules, quantum chemical studies were carried out using density functional theory (DFT) and molecular dynamics (MD) simulation.

Adsorption and Inhibition Mechanisms of New Pyrazole Derivatives for Carbon Steel Corrosion in Hydrochloric Acid Solutions Based on Experimental, Computational, and Theoretical Calculations.

The study aims to synthesize two green pyrazole compounds, N-((1H-pyrazol-1-yl)methyl)-4-nitroaniline (L4) and ethyl 5-methyl-1-(((4-nitrophenyl)amino)methyl)-1H-pyrazole-3-carboxylate (L6), and test their action as corrosion inhibitors for carbon steel (CS) in a 1 M HCl solution. Both chemical and electrochemical methods, namely, gravimetric measurements (WL), potentiodynamic polarization (PDP), and electrochemical impedance spectroscopy (EIS), were used to assess the efficiency of the investigated molecules. DFT calculations at B3LYP/6-31++G (d, p) and molecular dynamics simulation were used to carry out quantum chemical calculations in order to link their electronic characteristics with the findings of experiments. The organic products exhibited good anticorrosion ability, with maximum inhibition efficiencies (IE %) of 91.8 and 90.8% for 10-3 M L6 and L4, respectively. In accordance with PDP outcomes, L6 and L4 inhibitors act as mixed-type inhibitors. Assessment of the temperature influence evinces that both L4 and L6 are chemisorbed on CS. The adsorption of L4 and L6 on CS appears to follow the Langmuir isotherm. Scanning electron microscopy and UV-visible disclose the constitution of a barrier layer, limiting the accessibility of corrosive species to the CS surface. Theoretical studies were performed to support the results derived from experimental techniques (WL, PDP, and EIS).

Development and potential performance of prepolymer in corrosion inhibition for carbon steel in 1.0 M HCl: Outlooks from experimental and computational investigations.

Diglycidyl amino benzene (DGAB) epoxy prepolymer was investigated using Fourier transform infrared (FTIR) and nuclear magnetic resonance (NMR) spectroscopy. Then, we highlighted the usefulness of DGAB epoxy prepolymer to improve the resistance of carbon steel (CS) in hydrochloric acid (1.0 M HCl) using weight loss (WL), electrochemical impedance spectroscopy (EIS), potentiodynamic polarization (PDP), scanning electron microscope (SEM), atomic force microscopy (AFM), density functional theory (DFT) and complexation calculations, molecular dynamics (MD) and meansquaredisplacement (MSD) simulations. Highest inhibitory efficiencies for the WL, EIS and PDP methods at 10-3 M of DGAB are 90.8, 96.3 and 95.9%, respectively. SEM and AFM micrographs demonstrated that the epoxy prepolymer could effectively block the acid attack by chemisorption on the surface of the carbon steel, the high correlation coefficient and low Standard Deviation (SD) and low Sum of Squares (SS) value gave the best fit for Langmuir isotherm. PDP data suggested that the epoxy prepolymer could provide excellent corrosion performance and showed a mixed-type inhibitor with predominant cathodic effectiveness. Investigate of the inhibitory layer and the potential mechanism was conceptually evaluated using DFT, MD simulations, radial distribution function (RDF) and mean square displacement (MSD).

Experimental and computational investigations on the anti-corrosive and adsorption behavior of 7-N,N'-dialkyaminomethyl-8-Hydroxyquinolines on C40E steel surface in acidic medium.

Two new 7-N,N'-dialkylaminomethyl-8-Hydroxyquinolines, namely 7-N,N'-dipropylaminomethyl-8-Hydroxyquinoline (DPQ) and 7-N,N'-dimethylaminomethyl-8-Hydroxyquinoline (DMQ), were synthesized and characterized using 1H/13C NMR and Elemental analysis methods. Corrosion inhibition effect of DMP and DPQ for C40E steel in 1 M HCl was evaluated at different concentrations (10-3 to 10-6M) and temperatures (298 to 328 K) using several experimental and computational approaches. Weight loss and electrochemical studies showed that protection efficiencies (ηmax) of DPQ and DMQ increase with increase in concentrations. The DPQ and DMQ showed maximum efficiencies of 96.1% and 94.4%, respectivelyat 10-3 M. Polarization measurements showed that DMQ and DPQ act as mixed type corrosion inhibitors. Adsorption of DPQ and DMQ on C40E steel in 1 M HCl obeyed the Langmuir adsorption isotherm. Variation in surface morphology of corroded metallic surface with and without DMQ and DPQ was demonstrated using scanning electron microscopy. Molecular dynamics (MD) simulations studies showed that DPQ and DMQ acquire the flat or horizontal orientation over the C40E steel. DFT analyses revealed that both DPQ and DMQ interact with the C40E steelusing electron-sharing(donor-acceptor)mechanism. Computational analyses conducted using DFT and MD simulations well corroborate the experimental results.