RESUMO
The on-surface reactions of 10-bromo-10'-(2,6-dimethylphenyl)-9,9'-bianthracene on Au(111) have been investigated by scanning tunneling microscopy and spectroscopy, complemented by theoretical calculations. The reactions afford the synthesis of two open-shell nanographenes (1a and 1b) exhibiting different scenarios of all-carbon magnetism. 1a, an all-benzenoid nanographene with triangulene-like termini, contains a high proportion of zigzag edges which endows it with a low frontier gap and edge-localized states. The dominant reaction product, 1b, is a non-benzenoid nanographene consisting of a single pentagonal ring in a benzenoid framework. The presence of this non-benzenoid topological defect, which alters the bond connectivity in the hexagonal lattice, results in a non-Kekulé nanographene with an unpaired spin, which is detected as a Kondo resonance.
RESUMO
Nanographenes (NGs) have gained increasing attention due to their immense potential as tailor-made organic materials for nanoelectronics and spintronics. They exhibit a rich spectrum of physicochemical properties that can be tuned by controlling the size or the edge structure or by introducing structural defects in the honeycomb lattice. Here, we report the design and on-surface synthesis of NGs containing several odd-membered polycycles induced by a thermal procedure on Au(111). Our scanning tunneling microscopy, noncontact atomic force microscopy, and scanning tunneling spectroscopy measurements, complemented by computational investigations, describe the formation of two nonbenzenoid NGs (2A,B) containing four embedded azulene units in the polycyclic framework, via on-surface oxidative ring-closure reactions. Interestingly, we observe surface-catalyzed skeletal ring rearrangement reactions in the NGs, which lead to the formation of additional heptagonal rings as well as pentalene and as-indacene units in 2A,B, respectively. 2A,B on Au(111) both exhibit narrow experimental frontier electronic gaps of 0.96 and 0.85 eV, respectively, and Fermi level pinning of their HOMOs together with considerable electron transfer to the substrate. Ab initio calculations estimate moderate open-shell biradical characters for the NGs in the gas phase.
RESUMO
Understanding and controlling isomerization at the single molecular level should provide new insight into the molecular dynamics and design guidelines of functional devices. Scanning tunneling microscopy (STM) has been demonstrated to be a powerful tool to study isomerization of single molecules on a substrate, by either electric field or inelastic electron tunneling mechanisms. A similar molecular isomerization process can in principle be induced by mechanical force; however, relevant study has remained elusive. Here, we demonstrate that isomerization of a N,N-dimethylamino-dianthryl-benzene molecule on Ag(100) can be mechanically driven by the STM tip. The existence of an out-of-plane dimethylamino group in the molecule is found to play a pivotal role in the isomerization process by providing a steric hindrance effect for asymmetric interaction between the STM tip and the molecule. This underlying mechanism is further confirmed by performing molecular dynamics simulations, which show agreement with experimental results. Our work opens the opportunity to manipulate the molecular configuration on the basis of mechanical force.
RESUMO
Herein, we demonstrate an efficient synthesis of two antiaromatic constitutional isomers of pyrene-fused dicyclopenta[a,f]naphthalenes (PCPNs) 1a and 1b featuring 44 π-conjugated electrons. Notably, the thermodynamic stability of PCPNs can be tuned by ortho-fusing pyrene moieties to either the a or b bond of dicyclopentanaphthalene (CPN) leading to labile 1,5- (1a) or stable 2,6-naphthoquinodimethane (NQDM) (1b) configurations, respectively. Both isomers 1a and 1b exhibit moderate open-shell biradical characters (y0) of 0.48 and 0.44 and narrow energy gaps of 1.0 and 1.1 eV, respectively. Moreover, the spectroscopic and spin properties of radical cation and anion species of 1a and 1b are elucidated by in situ EPR/UV-vis-NIR spectroelectrochemical investigations. Furthermore, a solution-processed field-effect transistor of 1b was fabricated, manifesting its promising potential in organic electronics.
RESUMO
Triangular zigzag nanographenes, such as triangulene and its π-extended homologues, have received widespread attention as organic nanomagnets for molecular spintronics, and may serve as building blocks for high-spin networks with long-range magnetic order, which are of immense fundamental and technological relevance. As a first step towards these lines, we present the on-surface synthesis and a proof-of-principle experimental study of magnetism in covalently bonded triangulene dimers. On-surface reactions of rationally designed precursor molecules on Au(111) lead to the selective formation of triangulene dimers in which the triangulene units are either directly connected through their minority sublattice atoms, or are separated via a 1,4-phenylene spacer. The chemical structures of the dimers have been characterized by bond-resolved scanning tunneling microscopy. Scanning tunneling spectroscopy and inelastic electron tunneling spectroscopy measurements reveal collective singlet-triplet spin excitations in the dimers, demonstrating efficient intertriangulene magnetic coupling.
RESUMO
We report the first bottom-up synthesis of NBN-doped zigzag-edged GNRs (NBN-ZGNR1 and NBN-ZGNR2) through surface-assisted polymerization and cyclodehydrogenation based on two U-shaped molecular precursors with an NBN unit preinstalled at the zigzag edge. The resultant zigzag-edge topologies of GNRs are elucidated by high-resolution scanning tunneling microscopy (STM) in combination with noncontact atomic force microscopy (nc-AFM). Scanning tunneling spectroscopy (STS) measurements and density functional theory (DFT) calculations reveal that the electronic structures of NBN-ZGNR1 and NBN-ZGNR2 are significantly different from those of their corresponding pristine fully-carbon-based ZGNRs. Additionally, DFT calculations predict that the electronic structures of NBN-ZGNRs can be further tailored to be gapless and metallic through one-electron oxidation of each NBN unit into the corresponding radical cations. This work reported herein provides a feasible strategy for the synthesis of GNRs with stable zigzag edges yet tunable electronic properties.
RESUMO
In this work, we demonstrate the first synthesis of vinylene-linked 2D CPs, namely, 2D poly(phenylenequinoxalinevinylene)s 2D-PPQV1 and 2D-PPQV2, via the Horner-Wadsworth-Emmons (HWE) reaction of C2 -symmetric 1,4-bis(diethylphosphonomethyl)benzene or 4,4'-bis(diethylphosphonomethyl)biphenyl with C3 -symmetric 2,3,8,9,14,15-hexa(4-formylphenyl)diquinoxalino[2,3-a:2',3'-c]phenazine as monomers. Density functional theory (DFT) simulations unveil the crucial role of the initial reversible C-C single bond formation for the synthesis of crystalline 2D CPs. Powder X-ray diffraction (PXRD) studies and nitrogen adsorption-desorption measurements demonstrate the formation of proclaimed crystalline, dual-pore structures with surface areas of up to 440â m2 g-1 . More importantly, the optoelectronic properties of the obtained 2D-PPQV1 (Eg =2.2â eV) and 2D-PPQV2 (Eg =2.2â eV) are compared with those of cyano-vinylene-linked 2D-CN-PPQV1 (Eg =2.4â eV) produced by the Knoevenagel reaction and imine-linked 2D COF analog (2D-C=N-PPQV1, Eg =2.3â eV), unambiguously proving the superior conjugation of the vinylene-linked 2D CPs using the HWE reaction.
RESUMO
Cumulene compounds are notoriously difficult to prepare and study because their reactivity increases dramatically with the increasing number of consecutive double bonds. In this respect, the emerging field of on-surface synthesis provides exceptional opportunities because it relies on reactions on clean metal substrates under well-controlled ultrahigh-vacuum conditions. Here we report the on-surface synthesis of a polymer linked by cumulene-like bonds on a Au(111) surface via sequential thermally activated dehalogenative C-C coupling of a tribenzoazulene precursor equipped with two dibromomethylene groups. The structure and electronic properties of the resulting polymer with cumulene-like pentagon-pentagon and heptagon-heptagon connections have been investigated by means of scanning probe microscopy and spectroscopy methods and X-ray photoelectron spectroscopy, complemented by density functional theory calculations. Our results provide perspectives for the on-surface synthesis of cumulene-containing compounds, as well as protocols relevant to the stepwise fabrication of carbon-carbon bonds on surfaces.
RESUMO
In this work, we demonstrate the bottom-up on-surface synthesis of poly( para-dibenzo[ bc, kl]-coronenylene) (PPDBC), a zigzag edge-encased analog of poly( para-phenylene) (PPP), and its lateral fusion into zigzag edge-extended graphene nanoribbons (zeeGNRs). Toward this end, we designed a dihalogenated di( meta-xylyl)anthracene monomer displaying strategic methyl groups at the substituted phenyl ring and investigated its applicability as precursor in the thermally induced surface-assisted polymerization and cyclodehydrogenation. The structure of the resulting zigzag edge-rich (70%) polymer PPDBC was unambiguously confirmed by scanning tunneling microscopy (STM) and non-contact atomic force microscopy (nc-AFM). Remarkably, by further thermal treatment at 450 °C two and three aligned PPDBC chains can be laterally fused into expanded zeeGNRs, with a ribbon width of nine ( N = 9) up to 17 ( N = 17) carbon atoms. Moreover, the resulting zeeGNRs exhibit a high ratio of zigzag (67%) vs armchair (25%) edge segments and feature electronic band gaps as low as 0.9 eV according to gaps quasiparticle calculations.
RESUMO
The electronic and magnetic properties of nanographenes strongly depend on their size, shape and topology. While many nanographenes present a closed-shell electronic structure, certain molecular topologies may lead to an open-shell structure. Triangular-shaped nanographenes with zigzag edges, which exist as neutral radicals, are of considerable interest both in fundamental science and for future technologies aimed at harnessing their intrinsic high-spin magnetic ground states for spin-based operations and information storage. Their synthesis, however, is extremely challenging owing to the presence of unpaired electrons, which confers them with enhanced reactivity. We report a combined in-solution and on-surface synthesis of π-extended triangulene, a non-Kekulé nanographene with the structural formula C33H15, consisting of ten benzene rings fused in a triangular fashion. The distinctive topology of the molecule entails the presence of three unpaired electrons that couple to form a spin quartet ground state. The structure of individual molecules adsorbed on an inert gold surface is confirmed through ultrahigh-resolution scanning tunneling microscopy. The electronic properties are studied via scanning tunneling spectroscopy, wherein unambiguous spectroscopic signatures of the spin-split singly occupied molecular orbitals are found. Detailed insight into its properties is obtained through tight-binding, density functional and many-body perturbation theory calculations, with the latter providing evidence that π-extended triangulene retains its open-shell quartet ground state on the surface. Our work provides unprecedented access to open-shell nanographenes with high-spin ground states, potentially useful in carbon-based spintronics.
RESUMO
On-surface synthesis provides an effective approach toward the formation of graphene nanostructures that are difficult to achieve via traditional solution chemistry. Here, we report on the design and synthesis of a nonplanar porous nanographene with 78 sp 2 carbon atoms, namely C78. Through a highly selective oxidative cyclodehydrogenation of 2,3,6,7,10,11-hexa(naphthalen-1-yl)triphenylene (2), propeller nanographene precursor 1 was synthesized in solution. Interestingly, although 1 could not be cyclized further in solution, porous nanographene C78 was successfully achieved from 1 by on-surface assisted cyclodehydrogenation on Au(111). The structure and electronic properties of C78 have been investigated by means of scanning tunneling microscopy, noncontact atomic force microscopy, and scanning tunneling spectroscopy, complemented by computational investigations. Our results provide perspectives for the on-surface synthesis of porous graphene nanostructures, offering a promising strategy for the engineering of graphene materials with tailor-made properties.
RESUMO
Nonbenzenoid carbocyclic rings are postulated to serve as important structural elements toward tuning the chemical and electronic properties of extended polycyclic aromatic hydrocarbons (PAHs, or namely nanographenes), necessitating a rational and atomically precise synthetic approach toward their fabrication. Here, using a combined bottom-up in-solution and on-surface synthetic approach, we report the synthesis of nonbenzenoid open-shell nanographenes containing two pairs of embedded pentagonal and heptagonal rings. Extensive characterization of the resultant nanographene in solution shows a low optical gap, and an open-shell singlet ground state with a low singlet-triplet gap. Employing ultra-high-resolution scanning tunneling microscopy and spectroscopy, we conduct atomic-scale structural and electronic studies on a cyclopenta-fused derivative on a Au(111) surface. The resultant five to seven rings embedded nanographene displays an extremely narrow energy gap of 0.27 eV and exhibits a pronounced open-shell biradical character close to 1 (y0 = 0.92). Our experimental results are supported by mean-field and multiconfigurational quantum chemical calculations. Access to large nanographenes with a combination of nonbenzenoid topologies and open-shell character should have wide implications in harnessing new functionalities toward the realization of future organic electronic and spintronic devices.
RESUMO
Polycyclic aromatic azomethine ylides (PAMYs) are powerful building blocks in the bottom-up synthesis of internally nitrogen-containing polycyclic aromatic hydrocarbons (N-PAHs) through 1,3-cycloaddition reactions. In this work, the cycloaddition reaction of PAMYs to asymmetric ortho-quinones is presented, which, in contrast to the addition to symmetric para-quinones, facilitates subsequent condensation reactions and allows the synthesis of three helical N-PAHs with ullazine-quinoxaline (UQ-1-3) backbones. UQ-1 and UQ-2 possess two helical centers; however, single-crystal X-ray analysis together with the computational modeling of UQ-3 elucidate the formation of only the thermodynamically most stable geometry with four helical centers in a (P,P,M,M) configuration. For the series UQ-1-3, the number of redox steps is directly correlated with the number of ullazine or quinoxaline units incorporated into the targeted molecular backbones. A detailed investigation of the spectroscopic and magnetic properties of the radical cation and anion as well as the dication and dianion species by in situ EPR/UV/Vis-NIR spectroelectrochemistry is provided. The excellent optical and redox properties combined with helical geometries render them possibly applicable as chiral emitter or ambipolar charge transport material in organic electronics.
RESUMO
Cyano-substituted polyphenylene vinylenes (PPVs) have been the focus of research for several decades owing to their interesting optoelectronic properties and potential applications in organic electronics. With the advent of organic two-dimensional (2D) crystals, the question arose as to how the chemical and optoelectronic advantages of PPVs evolve in 2D compared with their linear counterparts. In this work, we present the efficient synthesis of two novel 2D fully sp2 -carbon-linked crystalline PPVs and investigate the essentiality of inorganic bases for their catalytic formation. Notably, among all bases screened, cesium carbonate (Cs2 CO3 ) plays a crucial role and enables reversibility in the first step with subsequent structure locking by formation of a C=C double bond to maintain crystallinity, which is supported by density functional theory (DFT) calculations. A quantifiable energy diagram of a "quasi-reversible reaction" is proposed, which allows the identification of further suitable C-C bond formation reactions for 2D polymerizations. Moreover, the narrowing of the HOMO-LUMO gap is delineated by expanding the conjugation into two dimensions. To enable environmentally benign processing, the post-modification of 2D PPVs is further performed, which renders stable dispersions in the aqueous phase.
RESUMO
A two-dimensional (2D) sp2 -carbon-linked conjugated polymer framework (2D CCP-HATN) has a nitrogen-doped skeleton, a periodical dual-pore structure and high chemical stability. The polymer backbone consists of hexaazatrinaphthalene (HATN) and cyanovinylene units linked entirely by carbon-carbon double bonds. Profiting from the shape-persistent framework of 2D CCP-HATN integrated with the electrochemical redox-active HATN and the robust sp2 carbon-carbon linkage, 2D CCP-HATN hybridized with carbon nanotubes shows a high capacity of 116â mA h g-1 , with high utilization of its redox-active sites and superb cycling stability (91 % after 1000 cycles) and rate capability (82 %, 1.0â A g-1 vs. 0.1â A g-1 ) as an organic cathode material for lithium-ion batteries.
RESUMO
Covalent organic frameworks (COFs) have garnered immense scientific interest among porous materials because of their structural tunability and diverse properties. However, the response of such materials toward laser-induced nonlinear optical (NLO) applications is hardly understood and demands prompt attention. Three novel regioregular porphyrin (Por)-based porous COFs-Por-COF-HH and its dual metalated congeners Por-COF-ZnCu and Por-COF-ZnNi-have been prepared and present excellent NLO properties. Notably, intensity-dependent NLO switching behavior was observed for these Por-COFs, which is highly desirable for optical switching and optical limiting devices. Moreover, the efficient π-conjugation and charge-transfer transition in ZnCu-Por-COF enabled a high nonlinear absorption coefficient (ß=4470â cm/GW) and figure of merit (FOM=σ1 /σo , 3565) value compared to other state-of-the-art materials, including molecular porphyrins (ß≈100-400â cm/GW), metal-organic frameworks (MOFs; ß≈0.3-0.5â cm/GW), and graphene (ß=900â cm/GW).
RESUMO
Zigzag-edged nanographene with two rows of fused linear acenes, called as n- peri-acene (n-PA), is considered as a potential building unit in the arena of organic electronics. n-PAs with four ( peri-tetracene, 4-PA), five ( peri-pentacene, 5-PA) or more benzene rings in a row have been predicted to show open-shell character, which would be attractive for the development of unprecedented molecular spintronics. However, solution-based synthesis of open-shell n-PA has thus far not been successful because of the poor chemical stability. Herein we demonstrated the synthesis and characterization of the hitherto unknown 4-PA by a rational strategy in which steric protection of the zigzag edges playing a pivotal role. The obtained 4-PA possesses a singlet biradical character ( y0 = 72%) and exhibits remarkable persistent stability with a half-life time ( t1/2) of â¼3 h under ambient conditions. UV-vis-NIR and electrochemical measurements reveal a narrow optical/electrochemical energy gap (1.11 eV) for 4-PA. Moreover, the bay regions of 4-PA enable the efficient 2-fold Diels-Alder reaction, yielding a novel full zigzag-edged circumanthracene.
RESUMO
Porous organic polymers (POPs) have attracted significant attention towards molecular adsorption in recent years due to their high porosity, diverse functionality and excellent chemical stability. In this work, we present a systematic case study on the formation of thiazolo[5,4-d]thiazole (TzTz) linkages through model compounds and its integration to synthesize a set of three novel, thermo-chemically stable TzTz-linked POPs, namely TzTz-POP-3, TzTz-POP-4, and TzTz-POP-5 with triphenylbenzene, tetraphenylpyrene and tetra(hydroxyphenyl)methane cores, respectively. Interestingly, the integrated TzTz moiety of the represented TzTz-POP-3 renders chemoselective removal of organic dye fluorescein (FL) from a mixture with parafuchsine (FU) in aqueous solution. The TzTz-POP-3 offered excellent chemoselectivity of ≈1:7 (FL:FU), compared to alike porous materials demonstrated for similar applications due to the presence of multiple active anchoring sites coupled with permanent porosity and appropriate pore window.
RESUMO
One antiaromatic polycyclic hydrocarbon (PH) with and without solubilizing tert-butyl substituents, namely s-indaceno[2,1- a:6,5- a']dipyrene (IDPs), has been synthesized by a four-step protocol. The IDPs represent the longitudinal, peri-extension of the indeno[1,2- b]fluorene skeleton towards a planar 40 π-electron system. Their structures were unambiguously confirmed by X-ray crystallographic analysis. The optoelectronic properties were studied by UV/vis absorption spectroscopy and cyclic voltammetry. These studies revealed that peri-fusion renders the IDP derivatives with a narrow optical energy gap of 1.8 eV. The maximum absorption of IDPs is shifted by 160 nm compared to the parent indenofluorene. Two quasi-reversible oxidation as well as reduction steps indicate an excellent redox behavior attributed to the antiaromatic core. Formation of the radical cation and the dication was monitored by UV/vis absorption spectroscopy during titration experiments. Notably, the fusion of s-indacene with two pyrene moieties lead to IDPs with absorption maxima approaching the near infrared (NIR) regime.
RESUMO
We report the first synthesis of a persulfurated polycyclic aromatic hydrocarbon (PAH) as a next-generation "sulflower." In this novel PAH, disulfide units establish an all-sulfur periphery around a coronene core. The structure, electronic properties, and redox behavior were investigated by microscopic, spectroscopic and electrochemical methods and supported by density functional theory. The sulfur-rich character of persulfurated coronene renders it a promising cathode material for lithium-sulfur batteries, displaying a high capacity of 520 mAh g-1 after 120 cycles at 0.6 C with a high-capacity retention of 90%.