Three-dimensional morphometry of strained bovine periodontal ligament using synchrotron radiation-based tomography.

The periodontal ligament (PDL) is a highly vascularized soft connective tissue. Previous studies suggest that the viscous component of the mechanical response may be explained by the deformation-induced collapse and expansion of internal voids (i.e. chiefly blood vessels) interacting with liquids (i.e. blood and interstitial fluids) flowing through the pores. In the present work we propose a methodology by means of which the morphology of the PDL vascular plexus can be monitored at different levels of compressive and tensile strains. To this end, 4-mm-diameter cylindrical specimens, comprising layers of bone, PDL and dentin covered by cementum, were strained at stretch ratios ranging from lambda = 0.6 to lambda = 1.4 and scanned using synchrotron radiation-based computer tomography. It was concluded that: (1) the PDL vascular network is layered in two distinct planes of blood vessels (BVs): an inner layer (close to the tooth), in which the BVs run in apico-coronal direction, and an outer layer (close to the alveolar bone), in which the BVs distribution is more diffuse; (2) during tension and compression, the porosity tissue is kept fairly constant; (3) mechanical straining induces important changes in BV diameters, possibly modifying the permeability of the PDL and thus contributing to the viscous component of the viscoelastic response observed under compressive forces.

Load response of periodontal ligament: assessment of fluid flow, compressibility, and effect of pore pressure.

The periodontal ligament (PDL) functions both in tension and in compression. The presence of an extensive vascular network inside the tissue suggests a significant contribution of the fluid phase to the mechanical response. This study examined the load response of bovine PDL under different pore pressure levels. A custom-made pressure chamber was constructed. Rod-shaped specimens comprising portions of dentine, bone, and intervening layer of PDL were extracted from bovine mandibular molars. The dentine ends of the specimens were secured to the actuator while the bone ends were affixed to the load cell. The entire assemblage was surrounded by the pressure chamber, which was then filled with saline. Specimens loaded at 1.0 Hz sinusoidal displacement were subjected to four different environmental fluid pressures (i.e., pressures of 0.0-1.0 MPa). The video images recorded during the tests were analyzed to determine whether or not fluid exchange between the PDL and the surrounding medium took place during mechanical loading. A value for the tissue's apparent Poisson ratio was also determined. The following observations were made: (1) fluid was squeezed out and pumped into the ligament during the compressive and tensile loading phases, (2) the PDL was highly compressible, and (3) the pore pressure had no influence on the mechanical response of the PDL. The present tests emphasized the biphasic structure of PDL tissue, which should be considered as a porous solid matrix through which fluid can freely flow.

Regional structural characteristics of bovine periodontal ligament samples and their suitability for biomechanical tests.

Mechanical testing of the periodontal ligament requires a practical experimental model. Bovine teeth are advantageous in terms of size and availability, but information is lacking as to the anatomy and histology of their periodontium. The aim of this study, therefore, was to characterize the anatomy and histology of the attachment apparatus in fully erupted bovine mandibular first molars. A total of 13 teeth were processed for the production of undecalcified ground sections and decalcified semi-thin sections, for NaOH maceration, and for polarized light microscopy. Histomorphometric measurements relevant to the mechanical behavior of the periodontal ligament included width, number, size and area fraction of blood vessels and fractal analysis of the two hard-soft tissue interfaces. The histological and histomorphometric analyses were performed at four different root depths and at six circumferential locations around the distal and mesial roots. The variety of techniques applied provided a comprehensive view of the tissue architecture of the bovine periodontal ligament. Marked regional variations were observed in width, surface geometry of the two bordering hard tissues (cementum and alveolar bone), structural organization of the principal periodontal ligament connective tissue fibers, size, number and numerical density of blood vessels in the periodontal ligament. No predictable pattern was observed, except for a statistically significant increase in the area fraction of blood vessels from apical to coronal. The periodontal ligament width was up to three times wider in bovine teeth than in human teeth. The fractal analyses were in agreement with the histological observations showing frequent signs of remodeling activity in the alveolar bone - a finding which may be related to the magnitude and direction of occlusal forces in ruminants. Although samples from the apical root portion are not suitable for biomechanical testing, all other levels in the buccal and lingual aspects of the mesial and distal roots may be considered. The bucco-mesial aspect of the distal root appears to be the most suitable location.

Hydro-mechanical coupling in the periodontal ligament: a porohyperelastic finite element model.

Harmonic tension-compression tests at 0.1, 0.5 and 1 Hz on hydrated bovine periodontal ligament (PDL) were numerically simulated. The process was modeled by finite elements (FE) within the framework of poromechanics, with the objective of isolating the contributions of the solid- and fluid phases. The solid matrix was modeled as a porous hyperelastic material (hyperfoam) through which the incompressible fluid filling the pores flowed in accordance with the Darcy's law. The hydro-mechanical coupling between the porous solid matrix and the fluid phase circulating through it provided an apparent time-dependent response to the PDL, whose rate of deformation depended on the permeability of the porous solid with respect to the interstitial fluid. Since the PDL was subjected to significant deformations, finite strains were taken into account and an exponential dependence of PDL permeability on void ratio - and therefore on the deformation state - was assumed. PDL constitutive parameters were identified by fitting the simulated response to the experimental data for the tests at 1 Hz. The values thus obtained were then used to simulate the tests at 0.1 and 0.5 Hz. The results of the present simulation demonstrate that a porohyperelastic model with variable permeability is able to describe the two main aspects of the PDL's response: (1) the dependency on strain-rate-the saturated material can develop volumetric strains by only exchanging fluid and (2) the asymmetry between tension and compression, which is due to the effect of both the permeability and the elastic properties on deformation.

The role of the fluid phase in the viscous response of bovine periodontal ligament.

The mechanical response of the periodontal ligament (PDL) is complex. This tissue responds as a hyperelastic solid when pulled in tension while demonstrating a viscous behavior under compression. This intricacy is reflected in the tissue's morphology, which comprises fibers, glycosaminoglycans, a jagged interface with the surrounding porous bone and an extensive vascular network. In the present study we offer an analysis of the viscous behavior and the interplay between the fibrous matrix and its fluid phase. Cylindrical specimens comprising layers of dentine, PDL and bone were extracted from bovine first molars and affixed to a tensile-compressive loading machine. The viscous properties of the tissue were analyzed (1) by subjecting the specimens to sinusoidal displacements at various frequencies and (2) by cycling the specimens in 'fully saturated' and in 'partially dry' conditions. Both modes assisted in determining the contribution of the fluid phase to the mechanical response. It was concluded that: (1) PDL showed pseudo-plastic viscous features for cyclic compressive loading, (2) these viscous features essentially resulted from interactions between the porous matrix and unbound fluid content of the tissue. Removing the liquid from the PDL largely eliminates its damping effect in compression.

Mechanical response of periodontal ligament: effects of specimen geometry, preconditioning cycles and time lapse.

This study was conducted as part of research line addressing the mechanical response of periodontal ligament (PDL) to tensile-compressive sinusoidal loading. The aim of the present project was to determine the effect of three potential sources of variability: (1) specimen geometry, (2) tissue preconditioning and (3) tissue structural degradation over time. For the three conditions, selected mechanical parameters were evaluated and compared. (1) Standard flat specimens (obtained by sequentially slicing portions of bone, PDL and dentin using a precision band saw) and new cylindrical specimens (extracted with a diamond-coated trephine drill) were obtained from bovine mandibular first molars and subjected to a sinusoidal load profile. (2) Specimens were loaded with up to 2000 cycles. (3) Specimens were immersed in saline and tested after 0, 30 and 60 min. From the data generated, the following was concluded: (1) specimen geometry and preparation technique do not influence the mechanical response of the PDL; (2) the mechanical response stabilizes after approximately 1000 cycles; and (3) no major structural degradation occurs when PDL is immersed in saline for a time lapse up to 60 min.

Mechanical behavior of bovine periodontal ligament under tension-compression cyclic displacements.

In the present study, the mechanical response of bovine periodontal ligament (PDL) subjected to displacement-controlled tension-compression harmonic oscillations and subsequent rupture was examined. Specimens including dentine, cementum, PDL, and alveolar bone were extracted from different depths and locations of bovine first molars. They were immersed in a saline solution at room temperature and clamped on their bone and dentine extremities. The samples were tested at +/-35% of the PDL's width, with a frequency of 1 Hz. The mechanical parameters evaluated were hysteresis, phase lag, and the modulus of the stress-stretch ratio curves in tension and compression. The tensile strength and the corresponding stretch ratio were also recorded. Stress-stretch ratio curves indicated a non-linear, time-dependent response with hysteresis and preconditioning effects. The hysteresis and phase lag in compression were much higher than in tension, suggesting that the dissipated energy was higher in compression than in tension. The root depth and location did not play essential roles for the tension or compression data, with the exception of limited statistical differences for tensile strength and corresponding stretch ratio. Thus, biological variability in the specimens, as a result of different bone contours, PDL width, and fiber orientation, did not affect the energy-absorbing capacity of the PDL. The evolution of the stress rate with stress demonstrated a constant increase of stiffness with stress. The stiffness values were twofold higher in tension than in compression. The data also showed that the stiffness of the PDL was comparable with data reported for other soft tissues.