Computational design of anisotropic nanocomposite actuators.

This paper presents a theoretical investigation of the design of a new actuator type made of anisotropic colloidal particles grafted with stimuli-responsive polymer chains. These artificial muscles combine the osmotic actuation principle of stimuli-responsive hydrogels with the structural alignment of colloidal liquid crystals to achieve directional motion. The solubility of the stimuli-responsive polymer in the neutral state, its degree of polymerization, the salt concentration, and the grafting density of the polymer chains on the surface of the colloidal particles are investigated and identified as important for actuator performance and tunability. The computational results suggest that the proposed mechanically active material matches or exceeds the performances of natural muscles and provide the guidelines for the realization of artificial muscles with predetermined actuation properties.

Closed-Loop Recycling of Vinylogous Urethane Vitrimers.

Devising energy-efficient strategies for the depolymerization of plastics and the recovery of their structural components in high yield and purity is key to a circular plastics economy. Here, we report a case study in which we demonstrate that vinylogous urethane (VU) vitrimers synthesized from bis-polyethylene glycol acetoacetates (aPEG) and tris(2-aminoethyl)amine can be degraded by water at moderate temperature with almost quantitative recovery (≈98 %) of aPEG. The rate of depolymerization can be controlled by the temperature, amount of water, molecular weight of aPEG, and composition of the starting material. These last two parameters also allow one to tailor the mechanical properties of the final materials, and this was used to access soft, tough, and brittle vitrimers, respectively. The straightforward preparation and depolymerization of the aPEG-based VU vitrimers are interesting elements for the design of polymer materials with enhanced closed-loop recycling characteristics.

Chemical Upcycling of Conventional Polyureas into Dynamic Covalent Poly(aminoketoenamide)s.

The chemical upcycling of polymers is an emerging strategy to transform post-consumer waste into higher-value chemicals and materials. However, on account of the high stability of the chemical bonds that constitute their main chains, the chemical modification of many polymers proves to be difficult. Here, we report a versatile approach for the upcycling of linear and cross-linked polyureas, which are widely used because of their high chemical stability. The treatment of these polymers or their composites with acetylacetone affords di-vinylogous amide-terminated compounds in good yield. These products can be reacted with aromatic isocyanates, and the resulting aminoketoenamide bonds are highly dynamic at elevated temperatures. We show here that this conversion scheme can be exploited for the preparation of dynamic covalent poly(aminoketoenamide) networks, which are healable and reprocessable through thermal treatment without any catalyst.

Supramolecular Stability of Benzene-1,3,5-tricarboxamide Supramolecular Polymers in Biological Media: Beyond the Stability-Responsiveness Trade-off.

Supramolecular assemblies have been gaining attention in recent years in the field of drug delivery because of their unique formulation possibilities and adaptive behavior. Their non-covalent nature allows for their self-assembly formulation and responsiveness to stimuli, an appealing feature to trigger a therapeutic action with spatiotemporal control. However, facing in vivo conditions is very challenging for non-covalent structures. Dilution and proteins in blood can have a direct impact on self-assembly, destabilizing the supramolecules and leading to a premature and uncontrolled cargo release. To rationalize this behavior, we designed three monomers exhibiting distinct hydrophobic cores that self-assemble into photo-responsive fibers. We estimated their stability-responsiveness trade-off in vitro, finding two well-separated regimes. These are low-robustness regime, in which the system equilibrates quickly and responds readily to stimuli, and high-robustness regime, in which the system equilibrates slowly and is quite insensitive to stimuli. We probed the performance of both regimes in a complex environment using Förster resonance energy transfer (FRET). Interestingly, the stability-responsiveness trade-off defines perfectly the extent of disassembly caused by dilution but not the one caused by protein interaction. This identifies a disconnection between intrinsic supramolecular robustness and supramolecular stability in the biological environment, strongly influenced by the disassembly pathway upon protein interaction. These findings shed light on the key features to address for supramolecular stability in the biological environment.

Utility and limitations of metabolic parameters in head and neck cancer: finding a practical segmentation method.

PURPOSE: Although metabolic tumor volume (MTV) and total lesion glycolysis (TLG) have shown good prognostic value in head and neck cancer (HNC), there are still many issues to resolve before their potential application in standard clinical practice. The purpose of this study was to compare the discrimination ability of two relevant segmentation methods in HNC and to evaluate the potential benefit of adding lymph nodes' metabolism (LNM) to the measurements. METHODS: We retrospectively analyzed a recently published database of 62 patients with HNC treated with chemoradiotherapy. MTV and TLG were measured using an absolute threshold of SUV2.5. Comparison analysis with previously published background-level threshold (BLT) results was done through Concordance index (C-index) in eight prognostic models. RESULTS: BLT obtained better C-index values in five out of the eight models. The addition of LNM improved C-index values in six of the prognostic models. CONCLUSION: We found a potential benefit in adding LNM to the main tumor measurements, as well as in using a BLT for MTV segmentation compared to the most commonly used SUV2.5 threshold. Despite its limitations, this study suggests a practical and simple manner to use these parameters in standard clinical practice, aiming to help elaborate a general consensus.

Heterolytic Bond Cleavage in a Scissile Triarylmethane Mechanophore.

Covalent mechanophores display the cleavage of a weak covalent bond when a sufficiently high mechanical force is applied. Three different covalent bond breaking mechanisms have been documented thus far, including concerted, homolytic, and heterolytic scission. Motifs that display heterolytic cleavage typically separate according to non-scissile reaction pathways that afford zwitterions. Here, we report a new mechanochromic triarylmethane mechanophore, which dissociates according to a scissile heterolytic pathway and displays a pronounced mechanochromic response. The mechanophore was equipped with two styrenylic handles that allowed its incorporation as a cross-linker into poly(N,N-dimethylacrylamide) and poly(methyl acrylate-co-2-hydroxyethyl acrylate) networks. These materials are originally colorless, but compression or tensile deformation renders the materials colored. By combining tensile testing and in situ transmittance measurements, we show that this effect is related to scissile cleavage leading to colored triarylmethane carbocations.

Tuning of Morphology by Chirality in Self-Assembled Structures of Bis(Urea) Amphiphiles in Water.

We present the synthesis and self-assembly of a chiral bis(urea) amphiphile and show that chirality offers a remarkable level of control towards different morphologies. Upon self-assembly in water, the molecular-scale chiral information is translated to the mesoscopic level. Both enantiomers of the amphiphile self-assemble into chiral twisted ribbons with opposite handedness, as supported by Cryo-TEM and circular dichroism (CD) measurements. The system presents thermo-responsive aggregation behavior and combined transmittance measurements, temperature-dependent UV, CD, TEM, and micro-differential scanning calorimetry (DSC) show that a ribbon-to-vesicles transition occurs upon heating. Remarkably, chirality allows easy control of morphology as the self-assembly into distinct aggregates can be tuned by varying the enantiomeric excess of the amphiphile, giving access to flat sheets, helical ribbons, and twisted ribbons.

Stepwise Adsorption of Alkoxy-Pyrene Derivatives onto a Lamellar, Non-Porous Naphthalenediimide-Template on HOPG.

The development of new strategies for the preparation of multicomponent supramolecular assemblies is a major challenge on the road to complex functional molecular systems. Here we present the use of a non-porous self-assembled monolayer from uC33 -NDI-uC33 , a naphthalenediimide symmetrically functionalized with unsaturated 33 carbon-atom-chains, to prepare bicomponent supramolecular surface systems with a series of alkoxy-pyrene (PyrOR) derivatives at the liquid/HOPG interface. While previous attempts at directly depositing many of these PyrOR units at the liquid/HOPG interface failed, the multicomponent approach through the uC33 -NDI-uC33 template enabled control over molecular interactions and facilitated adsorption. The PyrOR deposition restructured the initial uC33 -NDI-uC33 monolayer, causing an expansion in two dimensions to accommodate the guests. As far as we know, this represents the first example of a non-porous or non-metal complex-bearing monolayer that allows the stepwise formation of multicomponent supramolecular architectures on surfaces.

Discordant Supramolecular Fibres Reversibly Depolymerised by Temperature and Light.

Synthetic stimuli responsive supramolecular polymers attract increasing interest for their ability to mimic the unique properties of natural assemblies. Here we focus on the well-studied benzene-1,3,5-tricarboxamide (BTA) motif, and substitute it with two (S)-3,7-dimethyloctyl groups and an azobenzene photoswitch. We demonstrate the UV (λ=365 nm) induced depolymerisation of the helical hydrogen-bonded polymers in methylcyclohexane (MCH) through circular dichroism and UV-vis spectroscopy in dilute solution (15 µm), and NMR and iPAINT super-resolution microscopy in concentrated solution (300 µm). The superstructure can be regenerated after thermal depolymerization, whilst repeated depolymerisation can be reversed without degradation by irradiating at λ=455 nm. Molecular dynamics simulations show that the most energetically favourable configuration for these polymers in MCH is a left-handed helical network of hydrogen-bonds between the BTA cores surrounded by two right-handed helices of azobenzenes. The responsiveness to two orthogonal triggers across a broad concentration range holds promise for use in, for example, photo-responsive gelation.

An Azobenzene-Based Single-Component Supramolecular Polymer Responsive to Multiple Stimuli in Water.

One of the most appealing features of supramolecular assemblies is their ability to respond to external stimuli due to their noncovalent nature. This provides the opportunity to gain control over their size, morphology, and chemical properties and is key toward some of their applications. However, the design of supramolecular systems able to respond to multiple stimuli in a controlled fashion is still challenging. Here we report the synthesis and characterization of a novel discotic molecule, which self-assembles in water into a single-component supramolecular polymer that responds to multiple independent stimuli. The building block of such an assembly is a C3-symmetric monomer, consisting of a benzene-1,3,5-tricarboxamide core conjugated to a series of natural and non-natural functional amino acids. This design allows the use of rapid and efficient solid-phase synthesis methods and the modular implementation of different functionalities. The discotic monomer incorporates a hydrophobic azobenzene moiety, an octaethylene glycol chain, and a C-terminal lysine. Each of these blocks was chosen for two reasons: to drive the self-assembly in water by a combination of H-bonding and hydrophobicity and to impart specific responsiveness. With a combination of microscopy and spectroscopy techniques, we demonstrate self-assembly in water and responsiveness to temperature, light, pH, and ionic strength. This work shows the potential to integrate independent mechanisms for controlling self-assembly in a single-component supramolecular polymer by the rational monomer design and paves the way toward the use of multiresponsive systems in water.

Engineering Long-Range Order in Supramolecular Assemblies on Surfaces: The Paramount Role of Internal Double Bonds in Discrete Long-Chain Naphthalenediimides.

Achieving long-range order with surface-supported supramolecular assemblies is one of the pressing challenges in the prospering field of non-covalent surface functionalization. Having access to defect-free on-surface molecular assemblies will pave the way for various nanotechnology applications. Here we report the synthesis of two libraries of naphthalenediimides (NDIs) symmetrically functionalized with long aliphatic chains (C28 and C33) and their self-assembly at the 1-phenyloctane/highly oriented pyrolytic graphite (1-PO/HOPG) interface. The two NDI libraries differ by the presence/absence of an internal double bond in each aliphatic chain (unsaturated and saturated compounds, respectively). All molecules assemble into lamellar arrangements, with the NDI cores lying flat and forming 1D rows on the surface, while the carbon chains separate the 1D rows from each other. Importantly, the presence of the unsaturation plays a dominant role in the arrangement of the aliphatic chains, as it exclusively favors interdigitation. The fully saturated tails, instead, self-assemble into a combination of either interdigitated or non-interdigitated diagonal arrangements. This difference in packing is spectacularly amplified at the whole surface level and results in almost defect-free self-assembled monolayers for the unsaturated compounds. In contrast, the monolayers of the saturated counterparts are globally disordered, even though they locally preserve the lamellar arrangements. The experimental observations are supported by computational studies and are rationalized in terms of stronger van der Waals interactions in the case of the unsaturated compounds. Our investigation reveals the paramount role played by internal double bonds on the self-assembly of discrete large molecules at the liquid/solid interface.

Synthesis of Core-Modified Third-Generation Light-Driven Molecular Motors.

The synthesis and characterization of a series of light-driven third-generation molecular motors featuring various structural modifications at the central aromatic core are presented. We explore a number of substitution patterns, such as 1,2-dimethoxybenzene, naphthyl, 1,2-dichlorobenzene, 1,1':2',1″-terphenyl, 4,4″-dimethoxy-1,1':2',1″-terphenyl, and 1,2-dicarbomethoxybenzene, considered essential for designing future responsive systems. In many cases, the synthetic routes for both synthetic intermediates and motors reported here are modular, allowing for their post-functionalization. The structural modifications introduced in the core of the motors result in improved solubility and a bathochromic shift of the absorption maxima. These features, in combination with a structural design that presents remote functionalization of the stator with respect to the fluorene rotors, make these novel motors particularly promising as light-responsive actuators in covalent and supramolecular materials.

Directing the Solid-State Organization of Racemates via Structural Mutation and Solution-State Assembly Processes.

Chirality plays a central role in biomolecular recognition and pharmacological activity of drugs and can even lead to new functions such as spin filters. Although there have been significant advances in understanding and controlling the helical organization of enantiopure synthetic molecular systems, rationally dictating the assembly of mixtures of enantiomer (including racemates) is nontrivial. Here we demonstrate that a subtle change in molecular structure coupled with the understanding of assembly processes of enantiomers and racemates, in both dilute solution and concentrated gels, acts as a stepping stone to rationally control the organization in the solid-state. We have studied trans-1,2-disubstituted cyclohexanes as model systems with carboxamide, thioamide, and their combination as functional groups. On comparing the gelation propensity of individual enantiomers and racemates, we find that racemates of carboxamide, thioamide, and their combination adopt self-sorting, coassembly, and mixed organization, respectively. Remarkably, these modes of assembly of racemates were also retained in solid-state. These results point out that studying the solution-phase assembly is a key link for connecting molecular structure with the assembly in the solid-state, even for racemates.

Peptide-Driven Charge-Transfer Organogels Built from Synergetic Hydrogen Bonding and Pyrene-Naphthalenediimide Donor-Acceptor Interactions.

The peptide-driven formation of charge transfer (CT) supramolecular gels featuring both directional hydrogen-bonding and donor-acceptor (D-A) complexation is reported. Our design consists of the coassembly of two dipeptide-chromophore conjugates, namely diphenylalanine (FF) dipeptide conveniently functionalized at the N-terminus with either a pyrene (Py-1, donor) or naphthalene diimide (NDI-1, acceptor). UV/Vis spectroscopy confirmed the formation of CT complexes. FTIR and 1 H NMR spectroscopy studies underlined the pivotal role of hydrogen bonding in the gelation process, and electronic paramagnetic resonance (EPR) measurements unraveled the advantage of preorganized CT supramolecular architectures for charge transport over solutions containing non-coassembled D and A molecular systems.

Inherently chiral cone-calix[4]arenes via a subsequent upper rim ring-closing/opening methodology.

Access to chiral calix[4]arenes can unlock novel supramolecular architectures for enantioselective catalysis and molecular recognition. However, accessibility to these structures has been significantly hindered so far. We report herein the synthesis and characterization of di- and trifunctionalized cone-calix[4]arenes featuring a lactone moiety spanning the distal positions at the upper rim. The lactones force the whole skeleton to assume pinched-cone conformations. The ring-closure is favored by the high conformational flexibility of the calixarene scaffold. The new lactones are remarkably stable in the solid state, while a quick hydrolysis to restore the parent carboxylic acids occurs in solution under acidic/basic conditions. Slow aminolyses of lactones 2-3 yield inherently chiral products featuring three different functionalities at the upper rim, at room temperature. The subsequent ring-closing/opening methodology presented here highlights the versatility of these lactones as powerful synthons for the preparation of a variety of threefold upper rim functionalized, inherently chiral calix[4]arenes fixed in the cone structure.

Coupling of the Decarboxylation of 2-Cyano-2-phenylpropanoic Acid to Large-Amplitude Motions: A Convenient Fuel for an Acid-Base-Operated Molecular Switch.

The decarboxylation of 2-cyano-2-phenylpropanoic acid is fast and quantitative when carried out in the presence of 1 molar equivalent of a [2]catenane composed of two identical macrocycles incorporating a 1,10-phenanthroline unit in their backbone. When decarboxylation is over, all of the catenane molecules have experienced large-amplitude motions from neutral to protonated catenane, and back again to the neutral form, so that they are ready to perform another cycle. This study provides the first example of the cyclic operation of a molecular switch at the sole expenses of the energy supplied by the substrate undergoing chemical transformation, without recourse to additional stimuli.

Copper(I)-induced amplification of a [2]catenane in a virtual dynamic library of macrocyclic alkenes.

Olefin cross-metathesis of diluted dichloromethane solutions (≤0.15 M) of the 28-membered macrocyclic alkene C1, featuring a 1,10-phenanthroline moiety in the backbone, as well as of catenand 1, composed of two identical interlocked C1 units, generates families of noninterlocked oligomers Ci. The composition of the libraries is strongly dependent on the monomer concentration, but independent of whether C1 or 1 is used as feedstock, as expected for truly equilibrated systems. Accordingly, the limiting value 0.022 M approached by the equilibrium concentration of C1 when the total monomer concentration approaches the critical value, as predicted by the Jacobson-Stockmayer theory, provides a reliable estimate of the thermodynamically effective molarity. Catenand 1 behaves as a virtual component of the dynamic libraries, in that there is no detectable trace of its presence in the equilibrated mixtures, but becomes the major component - in the form of its copper(I) complex - when olefin cross-metathesis is carried out in the presence of a copper(I) salt.

Hemangiopericytoma of the parapharyngeal space: a diagnostic challenge.

Parapharyngeal space tumors are known for having a difficult approach, misleading diagnosis and for representing a treatment challenge. Hemangiopericytomas account for less than 1% of all vascular neoplasms and 3% of all soft tissue sarcomas. Only 14 cases have been reported in the worldwide literature in this location. We present a case of a 44-year-old male who was referred for evaluation. A CT scan and MRI showed a large parapharyngeal mass of a possible salivary gland origin. The patient underwent a lateral cervicotomy associated with a transparotid-transmandibular approach, obtaining a vimentin-positive immunostaining tumor defining the diagnosis. The accurate management and prognosis of this type of neoplasm are provided by the definite diagnosis obtained by a correct histopathologic assessment. A high clinical suspicion is essential.

Audiological evaluation (128-20,000Hz) in women with autoimmune thyroiditis: The role of antibodies vs. l-thyroxine deficiency.

BACKGROUND AND AIM: Although sensorineural hearing loss may have different aetiologies, we focused on autoimmune hearing loss since it may be reversible with corticosteroid therapy; this entity is sometimes associated with systemic autoimmune diseases. Hashimoto's thyroiditis or chronic autoimmune thyroiditis shows antibodies and may be harmful to hearing thresholds regardless of hypothyroidism effect. To date this effect has not been sufficiently studied and never with extended high frequencies. The aim of this work is to study by age groups whether hearing thresholds in the human auditory range (128-20,000Hz) are affected in Hashimoto's disease. MATERIALS AND METHODS: Two groups of 128 patients affected by Hashimoto's thyroiditis were included. First group: patients with pathological antithyroid antibodies who do not need L-thyroxine treatment. Second group: patients controlled with L-thyroxine substitutive treatment. Audiometric threshold study comparing between the groups of patients and a group of 209 controls was performed. All patients underwent complete otorhinolaryngological examination, antithyroid antibodies, TSH, T3 and T4 blood levels, tympanometry, conventional pure-tone audiometry, and extended-high-frequency audiometry. RESULTS: All patients were women. Both groups showed worst audiometric thresholds than the control group; both study groups showed worse hearing than controls, this difference was statistically significant in all frequencies. In the 8-20kHz frequency range, this difference was more than 10dB, and in the 9-16kHz and 20kHz range this difference was more than 20dB. When separated by age groups, in younger subjects (20-29 years) these differences were found in all frequencies, except for conversational frequencies (500-4,000Hz); between 30 and 49 years the difference is statistically significant in all frequencies; and from 50 to 69 years differences are found, especially in the conversational frequencies. CONCLUSIONS: This first work studying the human auditory range in the chronic autoimmune thyroiditis or Hashimoto's thyroiditis confirms that hearing loss related to the autoimmune disorder predominates at extended-high-frequencies initially. But ends up involving all frequencies in pure-tone conventional audiometry, then it may be detected in routine clinical tests. These results support the role of extended-high-frequencies audiometry to diagnose subclinical hearing loss in patients affected by Hashimoto's thyroiditis.

An electrolyte additive for the improved high voltage performance of LiNi0.5Mn1.5O4 (LNMO) cathodes in Li-ion batteries.

High-voltage cathode materials are important for the implementation of high-energy-density Li-ion batteries. However, with increasing cut-off voltages, interfacial instabilities between electrodes and the electrolyte limit their commercial development. This study addresses this issue by proposing a new electrolyte additive, (3-aminopropyl)triethoxysilane (APTS). APTS stabilises the interface between the LiNi0.5Mn1.5O4 (LNMO) cathode and the electrolyte in LNMO‖Li half-cells due to its multifunctional character. The amino groups in APTS facilitate the formation of a robust protective cathode layer. Its silane groups improve layer stability by neutralising the electrolyte's detrimental hydrogen fluoride and water. Electrochemical measurements reveal that the addition of 0.5 wt% APTS significantly improves the long-term cycling stability of LNMO‖Li half-cells at room temperature and 55 °C. APTS-addition to the electrolyte delivers excellent capacity retention of 92% after 350 cycles at room temperature and 71% after 300 cycles at 55 °C (1C) contrasting with the much lower performances of the additive-free electrolyte. The addition of a 0.5 wt% (3-glycidyloxypropyl)trimethoxysilane (GLYMO) additive, which contains only the siloxane group, but lacks the amine group, displayed a capacity retention of 73% after 350 cycles at room temperature but degraded significantly upon cycling at 55 °C.