RESUMO
The effect of crystallizing solution chemistry on the chemistry of subsequently as-grown materials was investigated for Mo-substituted iron oxides prepared by thermally activated co-precipitation. In the presence of Mo ions, we find that varying the oxidation state of the iron precursor from Fe(II) to Fe(III) causes a progressive loss of atomic long-range order with the stabilization of 2-4 nm particles for the sample prepared with Fe(III). The oxidation state of the Fe precursor also affects the distribution of Fe and Mo cations within the spinel structure. Increasing the Fe precursor oxidation state gives decreased Fe-ion occupation and increased Mo-ion occupation of tetrahedral sites, as revealed by the extended X-ray absorption fine structure. The stabilization of Mo within tetrahedral sites appears to be unexpected, considering the octahedral preferred coordination number of Mo(VI). The analysis of the atomic structure of the sample prepared with Fe(III) indicates a local ordering of vacancies and that the occupation of tetrahedral sites by Mo induces a contraction of the interatomic distances within the polyhedra as compared to Fe atoms. Moreover, the occupancy of Mo into the thermodynamic site preference of a Mo dopant in Fe2O3 assessed by density functional theory calculations points to a stronger preference for Mo substitution at octahedral sites. Hence, we suggest that the synthetized compound is thermodynamically metastable, that is, kinetically trapped. Such a state is suggested to be a consequence of the tetrahedral site occupation by Mo ions. The population of these sites, known to be reactive sites enabling particle growth, is concomitant with the stabilization of very small particles. We confirmed our hypothesis by using a blank experiment without Mo ions, further supporting the impact of tetrahedral Mo ions on the growth of iron oxide nanoparticles. Our findings provide new insights into the relationships between the Fe-chemistry of the crystallizing solution and the structural features of the as-grown Mo-substituted Fe-oxide materials.
RESUMO
The reaction between P2-type honeycomb layered oxides Na2Ni2TeO6 and K2Ni2TeO6 enables the formation of NaKNi2TeO6. The compound is characterized by X-ray diffraction and 23Na solid-state nuclear magnetic resonance spectroscopy, and the structure is discussed through density functional theory calculations. In addition to the honeycomb Ni/Te cationic ordering, NaKNi2TeO6 exhibits a unique example of alternation of sodium and potassium layers instead of a random alkali-mixed occupancy. Stacking fault simulations underline the impact of the successive position of the Ni/Te honeycomb layers and validate the presence of multiple stacking sequences within the powder material, in proportions that evolve with the synthesis conditions. In a broader context, this work contributes to a better understanding of the alkali-mixed layered compounds.
RESUMO
The OP4-(Li/Na)xCoO2 phase is an unusual lamellar oxide with a 1:1 alternation between Li and Na interslab spaces. In order to probe the local structure, electronic structure, and dynamics, 7Li and 23Na magic angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy was performed in complementarity to X-ray diffraction and electronic and magnetic properties measurements. 7Li MAS NMR showed that NMR shifts result from two contributions: the Fermi contact and the Knight shifts due to the presence of both localized and delocalized electrons, which is really unusual. 7Li MAS NMR clearly shows several Li environments, indicating that, moreover, Co ions with different local electronic structures are formed, probably due to the arrangement of the Na+ ions in the next cationic layer. 23Na MAS NMR showed that some Na+ ions are located in the Li layer, which was not previously considered in the structural model. The Rietveld refinement of the synchrotron XRD led to the OP4-[Li0.42Na0.05]Na0.32CoO2 formula for the material. In addition, 7Li and 23Na MAS NMR spectroscopies provide information about the cationic mobility in the material: Whereas no exchange is observed for 7Li up to 450 K, the 23Na spectrum already reveals a single average signal at room temperature due to a much larger ionic mobility.
RESUMO
While 17O NMR is increasingly being used for elucidating the structure and reactivity of complex molecular and materials systems, much effort is still required for it to become a routine analytical technique. One of the main difficulties for its development comes from the very low natural abundance of 17O (0.04%), which implies that isotopic labeling is generally needed prior to NMR analyses. However, 17O-enrichment protocols are often unattractive in terms of cost, safety, and/or practicality, even for compounds as simple as metal oxides. Here, we demonstrate how mechanochemistry can be used in a highly efficient way for the direct 17O isotopic labeling of a variety of s-, p-, and d-block oxides, which are of major interest for the preparation of functional ceramics and glasses: Li2O, CaO, Al2O3, SiO2, TiO2, and ZrO2. For each oxide, the enrichment step was performed under ambient conditions in less than 1 h and at low cost, which makes these synthetic approaches highly appealing in comparison to the existing literature. Using high-resolution solid-state 17O NMR and dynamic nuclear polarization, atomic-level insight into the enrichment process is achieved, especially for titania and alumina. Indeed, it was possible to demonstrate that enriched oxygen sites are present not only at the surface but also within the oxide particles. Moreover, information on the actual reactions occurring during the milling step could be obtained by 17O NMR, in terms of both their kinetics and the nature of the reactive species. Finally, it was demonstrated how high-resolution 17O NMR can be used for studying the reactivity at the interfaces between different oxide particles during ball-milling, especially in cases when X-ray diffraction techniques are uninformative. More generally, such investigations will be useful not only for producing 17O-enriched precursors efficiently but also for understanding better mechanisms of mechanochemical processes themselves.
RESUMO
Water-in-salt electrolytes based on highly concentrated bis(trifluoromethyl)sulfonimide (TFSI) promise aqueous electrolytes with stabilities nearing 3â V. However, especially with an electrode approaching the cathodic (reductive) stability, cycling stability is insufficient. While stability critically relies on a solid electrolyte interphase (SEI), the mechanism behind the cathodic stability limit remains unclear. Now, two distinct reduction potentials are revealed for the chemical environments of free and bound water and that both contribute to SEI formation. Free water is reduced about 1â V above bound water in a hydrogen evolution reaction (HER) and is responsible for SEI formation via reactive intermediates of the HER; concurrent LiTFSI precipitation/dissolution establishes a dynamic interface. The free-water population emerges, therefore, as the handle to extend the cathodic limit of aqueous electrolytes and the battery cycling stability.
RESUMO
Layered oxide compositions Li3-xNaxNi2SbO6 have been prepared by solid-state synthesis. A complete solid solution is evidenced and characterized by X-ray and neutron diffraction as well as 7Li and 23Na solid-state nuclear magnetic resonance spectroscopy. The transition-metal layer is characterized by the classic honeycomb Ni2+/Sb5+ ordering, whereas a more uncommon randomly mixed occupancy of lithium and sodium is evidenced within the alkali interslab space. In situ X-ray diffraction and density functional theory calculations show that this alkali disordered feature is entropically driven. Fast cooling then appears as a synthesis root to confine bidimensional alkali glass within crystalline layered oxides.
RESUMO
The new layered compound Li(3)Ni(2)BiO(6) has been prepared by a solid-state reaction. It crystallizes in the monoclinic C2/m space group; its lamellar structure is characterized by a honeycomb ordering between Ni(2+) and Bi(5+) within the slabs, while Li(+) ions occupy octahedral sites in the interslab space. Stacking defects weakly alter the XRD pattern. By substitution of half of the nickel ions, the new phases Li(3)NiM'BiO(6) (M' = Mg, Cu, Zn) isostructural with Li(3)Ni(2)BiO(6) have been synthesized under similar conditions. All these compounds demonstrate paramagnetic behavior at high temperature, and Li(3)Ni(2)BiO(6) exhibits an antiferromagnetic ordering at 5.5 K. By topotactic molten salt ionic exchange, the new delafossite compound Ag(3)Ni(2)BiO(6) has been also obtained and characterized.
RESUMO
In nonaqueous Mg batteries, inactive adsorbed species and the passivation layer formed from the reactive Mg with impurities in the electrolyte seriously affect the Mg metal/electrolyte interface. These adlayers can impede the passage of Mg2+ ions, leading to a high Mg plating/stripping overpotential. Herein, we report the properties of a new additive, bismuth triflate (Bi(OTf)3), for synthesizing a chlorine-free Mg electrolyte to enhance Mg plating/stripping from initial cycles. The beneficial effect of Bi(OTf)3 can be ascribed to Bi/Mg3Bi2 formed in situ on the Mg metal surface, which increases the charge transfer during the on-off transition by reducing the adsorption of inactive species on the Mg surface and enhancing the resistance of the reactive surface to passivation. This simple method provides a new avenue to improve the compatibility between the Cl-free Mg electrolyte and the Mg metal anode.
RESUMO
Sodium-rich iron hexacyanoferrates were prepared by coprecipitation, hydrothermal route, and under reflux, with or without dehydration. They were obtained with different structures described in cubic, orthorhombic, or rhombohedral symmetry, with variable compositions in sodium, water, and cationic vacancies and with a variety of morphologies. This series of sodium-rich Prussian blue analogues allowed addressing the relationship between synthesis conditions, composition, structure, morphology, and electrochemical properties in Na-ion batteries. A new orthorhombic phase with the Na1.8Fe2(CN)6·0.7H2O composition synthesized by an hydrothermal route at 140 °C is reported for the first time, whereas a phase of Na2Fe2(CN)6·2H2O composition obtained under reflux, previously described with a monoclinic structure, shows in fact a rhombohedral structure.
RESUMO
We report a non-hydrolytic sol-gel (NHSG) route to engineer original mesoporous TinO2n-1@TiO2/C nanocomposites. The synthetic approach is straightforward, solvent-free, additive-free, and meets the challenge of atom economy, as it merely involves TiCl4 and THF in stoichiometric amounts. We found that these nanocomposites present enhanced electrocatalytic properties towards the oxygen reduction reaction (ORR) in 0.1 M KOH. We believe that these preliminary results will open a window of opportunity for the design of metal suboxides/carbon nanocomposites through NHSG routes.
RESUMO
The electrochemical alloying of lead-based electrodes with potassium was investigated by galvanostatic measurements as well as by ex situ and operando X-ray diffraction. The electrochemical reduction must be activated by an initial high current pulse which prevents the passivation of the lead electrode. The alloying process leads to the formation of crystalline KPb. During the discharge, two intermediate phases are observed, K10Pb48 and K4Pb9, whereas only K4Pb9 seems to form during the charge. High capacity retention is observed, with, however, a limited specific capacity value because of high weight of lead.
RESUMO
The development of efficient, inexpensive, and safe rechargeable batteries for large-scale environmentally benign cells is one of the key requirements to accommodate and satisfy various technological applications. To date, the development of magnesium battery as a promising candidate for next-generation battery systems has been hindered by the lack of high performance and stable electrolyte. In this work, we have developed an original, safe, and high-performance class of electrolytes based on a simple mixture of commercially available compounds, that is, Mg(TFSI)2, anthracene, MgCl2, and diglyme solvent. We have proven that anthracene induces stabilization of the reduced form of magnesium involving reversible magnesium plating/stripping with very high current density. The electrolyte investigated exhibits an unprecedented electrochemical stability window of up to 3.1 V, whereas MgCl2 addition allows the improvement of the Mg/electrolyte interface properties and enables a large cyclability of Mg/Mo6S8 Chevrel phase cell, allowing one to reach high performances.
RESUMO
A new class of electrolyte based on TFSI- and triphenolate-borohydride anions was designed and produced which fulfill all requirements of easy synthesis, high ionic conductivity, wide potential window, and noncorrosion of Al current collector. The electrolyte composed of magnesium triphenolate borohydride and Mg(TFSI)2 in glyme simultaneously displays a high conductivity of 5.5 mS cm-1 at 25 °C and a reversible Mg plating/stripping with high current density and Coulombic efficiency at room temperature. By addition of a slight amount of MgCl2 to this electrolyte, a Coulombic efficiency of 90% in an SS/Mg cell, stable cycling performance, and a wide anodic potential of 3.4 V vs Mg2+/Mg on Al current collector can be reached. Reversible and efficient Mg insertion/deinsertion with a high capacity of 94 mAh g-1 and 96% Coulombic efficiency was obtained in a Mo6S8 Chevrel cathode phase.