Nanoplastics alter ecosystem multifunctionality and may increase global warming potential.

Although the presence of nanoplastics in aquatic and terrestrial ecosystems has received increasing attention, little is known about its potential effect on ecosystem processes and functions. Here, we evaluated if differentially charged polystyrene (PS) nanoplastics (PS-NH2 and PS-SO3 H) exhibit distinct influences on microbial community structure, nitrogen removal processes (denitrification and anammox), emissions of greenhouse gases (CO2 , CH4 , and N2 O), and ecosystem multifunctionality in soils with and without earthworms through a 42-day microcosm experiment. Our results indicated that nanoplastics significantly altered soil microbial community structure and potential functions, with more pronounced effects for positively charged PS-NH2 than for negatively charged PS-SO3 H. Ecologically relevant concentration (3 g kg-1 ) of nanoplastics inhibited both soil denitrification and anammox rates, while environmentally realistic concentration (0.3 g kg-1 ) of nanoplastics decreased the denitrification rate and enhanced the anammox rate. The soil N2 O flux was always inhibited 6%-51% by both types of nanoplastics, whereas emissions of CO2 and CH4 were enhanced by nanoplastics in most cases. Significantly, although N2 O emissions were decreased by nanoplastics, the global warming potential of total greenhouse gases was increased 21%-75% by nanoplastics in soils without earthworms. Moreover, ecosystem multifunctionality was increased 4%-12% by 0.3 g kg-1 of nanoplastics but decreased 4%-11% by 3 g kg-1 of nanoplastics. Our findings provide the only evidence to date that the rapid increase in nanoplastics is altering not only ecosystem structure and processes but also ecosystem multifunctionality, and it may increase the emission of CO2 and CH4 and their global warming potential to some extent.

Fingerprinting Plastic-Associated Inorganic and Organic Matter on Plastic Aged in the Marine Environment for a Decade.

The long-term aging of plastic leads to weathering and biofouling that can influence the behavior and fate of plastic in the marine environment. This is the first study to fingerprint the contaminant profiles and bacterial communities present in plastic-associated inorganic and organic matter (PIOM) isolated from 10 year-aged plastic. Plastic sleeves were sampled from an oyster aquaculture farm and the PIOM was isolated from the intertidal, subtidal, and sediment-buried segments to investigate the levels of metal(loid)s, polyaromatic hydrocarbons (PAHs), per-fluoroalkyl substances (PFAS) and explore the microbial community composition. Results indicated that the PIOM present on long-term aged high-density polyethylene plastic harbored high concentrations of metal(loid)s, PAHs, and PFAS. Metagenomic analysis revealed that the bacterial composition in the PIOM differed by habitat type, which consisted of potentially pathogenic taxa including Vibrio, Shewanella, and Psychrobacter. This study provides new insights into PIOM as a potential sink for hazardous environmental contaminants and its role in enhancing the vector potential of plastic. Therefore, we recommend the inclusion of PIOM analysis in current biomonitoring regimes and that plastics be used with caution in aquaculture settings to safeguard valuable food resources, particularly in areas of point-source contamination.

Exploring the Composition and Functions of Plastic Microbiome Using Whole-Genome Sequencing.

Besides the ecotoxicological consequences of microplastics and associated chemicals, the association of microbes on plastics has greater environmental implications as microplastics may select for unique microbiome participating in environmentally significant functions. Despite this, the functional potential of the microbiome associated with different types of plastics is understudied. Here, we investigate the interaction between plastic and marine biofilm-forming microorganisms through a whole-genome sequencing approach on four types of microplastics incubated in the marine environment. Taxonomic analysis suggested that the microplastic surfaces exhibit unique microbial profiles and niche partitioning among the substrates. In particular, the abundance of Vibrio alginolyticus and Vibrio campbellii suggested that microplastic pollution may pose a potential risk to the marine food chain and negatively impact aquaculture industries. Microbial genera involved in xenobiotic compound degradation, carbon cycling, and genes associated with the type IV secretion system, conjugal transfer protein TraG, plant-pathogen interaction, CusA/CzcA family heavy metal efflux transfer proteins, and TolC family proteins were significantly enriched on all the substrates, indicating the variety of processes operated by the plastic-microbiome. The present study gives a detailed characterization of the rapidly altering microbial composition and gene pools on plastics and adds new knowledge surrounding the environmental ramifications of marine plastic pollution.

Biofilms Enhance the Adsorption of Toxic Contaminants on Plastic Microfibers under Environmentally Relevant Conditions.

Microplastics (MPs) exposed to the natural environment provide an ideal surface for biofilm formation, which potentially acts as a reactive phase facilitating the sorption of hazardous contaminants. Until now, changes in the contaminant sorption capacity of MPs due to biofilm formation have not been quantified. This is the first study that compared the capacity of naturally aged, biofilm-covered microplastic fibers (BMFs) to adsorb perfluorooctane sulfonate (PFOS) and lead (Pb) at environmentally relevant concentrations. Changes in the surface properties and morphology of aged microplastic fibers (MF) were studied by surface area analysis, infrared spectroscopy, and scanning electron microscopy. Results revealed that aged MFs exhibited higher surface areas because of biomass accumulation compared to virgin samples and followed the order polypropylene>polyethylene>nylon>polyester. The concentrations of adsorbed Pb and PFOS were 4-25% and 20-85% higher in aged MFs and varied among the polymer types. The increased contaminant adsorption was linked with the altered surface area and the hydrophobic/hydrophilic characteristics of the samples. Overall, the present study demonstrates that biofilms play a decisive role in contaminant-plastic interactions and significantly enhance the vector potential of MFs for toxic environmental contaminants. We anticipate that knowledge generated from this study will help refine the planetary risk assessment of MPs.

Microplastics and climate change: the global impacts of a tiny driver.

Microplastic pollution and climate change, the two seemingly distinct phenomena of global concern, are interconnected through various pathways. The connecting links between the two include the biological carbon pumps in the oceans, the sea ice, the plastisphere involved in biogeochemical cycling and the direct emissions of greenhouse gases from microplastics. On one hand, the presence of microplastics in the water column disrupts the balance of the natural carbon sequestration by affecting the key players in the pumping of carbon, such as the phytoplankton and zooplankton. On the other hand, the effect of microplastics on the sea ice in Polar Regions is two-way, as the ice caps are transformed into sinks and sources of microplastics and at the same time, the microplastics can enhance the melting of ice by reducing the albedo. Microplastics may have more potential than larger plastic fragments to release greenhouse gases (GHGs). Microbe-mediated emission of GHGs from soils is also now altered by the microplastics present in the soil. Plastisphere, the emerging microbiome in aquatic environments, can also contribute to climate change as it hosts complex networks of microbes, many of which are involved in greenhouse gas production. To combat a global stressor like climate change, it needs to be addressed with a holistic approach and this begins with tracing the various stressors like microplastic pollution that can aggravate the impacts of climate change.

Consuming microplastics? Investigation of commercial salts as a source of microplastics (MPs) in diet.

The omnipresence of microplastics (MPs) in marine and terrestrial environments as a pollutant of concern is well established and widely discussed in the literature. However, studies on MP contamination in commercial food sources like salts from the terrestrial environment are scarce. Thus, this is the first study to investigate various varieties of Australian commercial salts (both terrestrial and marine salts) as a source of MPs in the human diet, and the first to detect MPs in black salt. Using Nile red dye, the MPs were detected and counted under light microscopy, further characterised using attenuated total reflectance Fourier transformed infrared spectroscopy (ATR-FTIR) and scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM-EDS). Of all the 90 suspected particles, 78.8% were identified as MPs with a size ranging between 23.2 µm and 3.9 mm. The fibres and fragments constituted 75.78% and 24.22% respectively. Among the tested samples, Himalayan pink salt (coarse) from terrestrial sources was found to have the highest MP load, i.e. 174.04 ± 25.05 (SD) particle/kg, followed by black salt at 157.41 ± 23.13 particle/kg. The average concentration of detected MPs in Australian commercial salts is 85.19 ± 63.04 (SD) per kg. Polyamide (33.8%) and polyurethane (30.98%) were the dominant MP types. Considering the maximum recommended (World Health Organization) salt uptake by adults daily at 5 g, we interpret that an average person living in Australia may be ingesting approximately 155.47 MPs/year from salt uptake. Overall, MP contamination was higher in terrestrial salts (such as black and Himalayan salt) than the marine salt. In conclusion, we highlight those commercial salts used in our daily lives serve as sources of MPs in the diet, with unknown effects on human health.

Spatial turnover of core and occasional bacterial taxa in the plastisphere from a plateau river, China.

Plastic surfaces in the environment are a comparatively new niche for microbial colonization, also known as the "plastisphere". However, our understanding of the core and occasional bacterial taxa in the plastisphere is limited. Here, environmental plastic, water, and sediment samples were collected from 10 sites in a plateau river (Lhasa River, China) in September of 2019. The composition and spatial turnover of core and occasional bacterial taxa in the plastisphere were revealed via 16S rRNA gene sequencing and compared with water and sediment. The results indicated that deterministic processes dominated the habitat specialization that shaped the formation of core and occasional taxa in the plastisphere, water, and sediment of the Lhasa River because the decline in zeta diversity in the plastisphere, water, and sediment was more fitted to a power-law form rather than an exponential form. Proteobacteria (65.9%), Bacteroidetes (16.0%), and Cyanobacteria (11.7%) dominated the plastic core taxa. Core taxa rather than occasional taxa in the plastisphere had a lower (21.7%) proportion of OTUs and a higher (81.7%) proportion of average relative abundance than water and sediment, which were dominant in plastic bacterial communities. The spatial turnover of core and occasional bacterial taxa in the plastisphere was governed by abiotic as well as biotic factors. Specifically, the spatial turnover of core taxa in the plastisphere with high connectivity but low functional redundancy was easily affected by geographical distance, altitude, and heavy metals. Furthermore, strong drug resistance was found in the spatially persistent core taxa in the plastisphere. This study provides empirical support for the spatial turnover (species variation) and potential ecological mechanisms of bacterial communities in the plastisphere from river ecosystems.

Understanding the Fundamental Basis for Biofilm Formation on Plastic Surfaces: Role of Conditioning Films.

Conditioning films (CFs) are surface coatings formed by the adsorption of biomolecules from the surrounding environment that can modify the material-specific surface properties and precedes the attachment of microorganisms. Hence, CFs are a biologically relevant identity that could govern the behavior and fate of microplastics in the aquatic environment. In the present study, polyethylene terephthalate (PET) and polylactic acid (PLA) plastic cards were immersed in natural seawater to allow the formation of CFs. The changes in the surface roughness after 24 h were investigated by atomic force microscopy (AFM), and the surface changes were visualized by scanning electron microscopy (SEM). The global elemental composition of the conditioned surface was investigated by energy dispersive spectroscopy (EDS). Results indicated that marine conditioning of PET and PLA samples for 24 h resulted in an increase of ∼11 and 31% in the average surface roughness, respectively. SEM images revealed the attachment of coccoid-shaped bacterial cells on the conditioned surfaces, and the accumulation of salts of sodium and phosphate-containing precipitates was revealed through the EDS analysis. The results indicate that the increase in surface roughness due to conditioning is linked to a material's hydrophilicity leading to a rapid attachment of bacteria on the surfaces. Further investigations into the CFs can unfold crucial knowledge surrounding the plastic-microbe interaction that has implications for medical, industrial, and environmental research.

Estimation of the mass of microplastics ingested - A pivotal first step towards human health risk assessment.

The ubiquitous presence of microplastics in the food web has been established. However, the mass of microplastics exposure to humans is not defined, impeding the human health risk assessment. Our objectives were to extract the data from the available evidence on the number and mass of microplastics from various sources, to determine the uncertainties in the existing data, to set future research directions, and derive a global average rate of microplastic ingestion to assist in the development of human health risk assessments and effective management and policy options. To enable the comparison of microplastics exposure across a range of sources, data extraction and standardization was coupled with the adoption of conservative assumptions. Following the analysis of data from fifty-nine publications, an average mass for individual microplastics in the 0-1 mm size range was calculated. Subsequently, we estimated that globally on average, humans may ingest 0.1-5 g of microplastics weekly through various exposure pathways. This was the first attempt to transform microplastic counts into a mass value relevant to human toxicology. The determination of an ingestion rate is fundamental to assess the human health risks of microplastic ingestion. These findings will contribute to future human health risk assessment frameworks.

Interaction of chemical contaminants with microplastics: Principles and perspectives.

Scientific evidences abound of the occurrence of plastic pollution, from mega- to nano-sized plastics, in virtually all matrixes of the environment. Apart from the direct effects of plastics and microplastics pollution such as entanglement, inflammation of cells and gut blockage due to ingestion, plastics are also able to act as vectors of various chemical contaminants in the aquatic environment. This paper provides a review of the association of plastic additives with environmental microplastics, how the structure and composition of polymers influence sorption capacities and highlights some of the models that have been employed to interpret experimental data from recent sorption studies. The factors that influence the sorption of chemical contaminants such as the degree of crystallinity, surface weathering, and chemical properties of contaminants. and the implications of chemical sorption by plastics for the marine food web and human health are also discussed. It was however observed that most studies relied on pristine or artificially aged plastics rather than field plastic samples for studies on chemical sorption by plastics.

Braving the attitude of altitude: Caragana jubata at work in cold desert of Himalaya.

The present work was conducted to understand the basis of adaptation in Caragana jubata in its niche environment at high altitude cold desert of Himalaya. Molecular data showed predominance of genes encoding chaperones and those involved in growth and development at low temperature (LT), a major cue operative at high altitude. Importantly, these genes expressed in C. jubata in its natural habitat. Their homologues in Arabidopsis thaliana, Oryza sativa, and Glycine max did not exhibit similar trend of gene expression at LT. Constitutive expression and a quick up-regulation of the above genes suggested the ability of C. jubata to adjust its cellular machinery to maintain growth and development in its niche. This was reflected in LT(50 )(the temperature at which 50% injury occurred) and LT mediated photosynthetic acclimatory response. Such molecular and physiological plasticity enables C. jubata to thrive in the high altitude cold desert of Himalayas.