Exploring Chemical and Electrochemical Limitations in Sulfide Solid State Electrolytes: A Critical Review on Current Status and Manufacturing Scope.

Lithium-ion batteries (LIBs) have gained recognition for their high energy density and cost-effectiveness. However, issues such as safety concerns, dendrite formation, and limited operational temperatures necessitate alternative solutions. A promising approach involves replacing flammable liquid electrolytes with non-flammable solid electrolytes (SEs). SEs represent a transformative shift in battery technology, offering stability, safety, and expanded temperature ranges. They effectively mitigate dendrite growth, enhancing battery reliability and lifespan. SEs also improve energy density, making them crucial for applications like portable gadgets, electric vehicles, and renewable energy storage. However, challenges such as ionic conductivity, chemical and thermal stability, mechanical strength, and manufacturability must be addressed. This review paper briefly identifies SE types, discusses their advantages and disadvantages, and explores ion transport fundamentals and all-solid-state batteries (ASSBs) production challenges. It comprehensively analyzes sulfide SEs (SSEs), focusing on recent advancements, chemical and electrochemical challenges, and potential future improvements. Electrochemical reactions, electrolyte materials, compositions, and cell designs are critically assessed for their impact on battery performance. The review also addresses challenges in ASSB production. The objective is to provide a comprehensive understanding of SSEs, laying the groundwork for advancing sustainable and efficient energy storage systems.

Relationship between Silicon Percentage in Graphite Anode to Achieve High-Energy-Density Lithium-Ion Batteries.

High-weight-percentage silicon (Si) in graphite (Gr) anodes face commercialization hurdles due to fundamental and interrelated challenges. Nevertheless, using the existing manufacturing line, the optimized Si/Gr ratio is the most efficient and valuable way to fabricate high-energy-density lithium-ion batteries (LIBs). Still, literature has not thoroughly examined the Si/Gr ratio. This study addresses this critical gap by systematically evaluating Si content (5-20 wt %) in commercial graphite. The goal is to optimize the Si/Gr ratio for exceptional specific capacity while mitigating inherent Si limitations like cyclic stability and first-cycle irreversible capacity loss. This work employs a multidirectional approach, including in situ electrochemical impedance spectroscopy for interface analysis, rate capability assessment (up to 3 C-rate), Li diffusion coefficient measurement, and thorough cyclic stability evaluation. Increasing the silicon (Si) weight percent from 10% to 15% in the Si15Gr75 composite anode resulted in significant improvements in the first lithiation and delithiation capacities by approximately 16.8% and 16.0%, respectively. The Si15Gr75 cell delivered a high initial Coulombic efficiency of roughly 82.9%, nearly equivalent to a pure graphite anode. Furthermore, the Si15Gr75 Li cell exhibited excellent cyclic stability at a current rate of 0.5 C, retaining about 60% of its capacity after 215 cycles. Additionally, full-cell testing against a commercial NMC622 cathode showcases excellent performance across various current rates (0.1-0.5 C). This study paves the way for the development of high-energy-density LIBs by providing valuable insights into the optimization of Si/Gr composite anodes for commercial viability.

Germanium-Free Dense Lithium Superionic Conductor and Interface Re-Engineering for All-Solid-State Lithium Batteries against High-Voltage Cathode.

Li10GeP2S12 (LGPS) solid electrolyte is not affordable due to the high cost of Ge metal, making it economically unviable despite being a lithium superionic conductor. The synthesis of such solid electrolytes is much more time- and energy-consuming and needs an inert environment. Here, we report Si (silicon)-based composition [Li10SiP2S12 (LSiPS)] to make it cost-effective through microwave heating (MW). The total time for synthesis processes, including ball milling, heating rate, and heating dwell time, is ∼120 min, much less than the previous reports. We have also avoided vacuum sealing/Ar-purging to reduce the synthesis cost further. During MW heating, the densification process dominates over coarsening, resulting in a dense nanoflake morphology with a finer crystallite size. The synthesized LSiPS has a high fraction (∼89%) of more conducting tetragonal phase as identified by NMR analysis. Further, we modified the interface between the Li anode and LSiPS by forming a lithiophobic and lithiophilic kind of gradient interlayer to reduce the reduction of LSiPS and suppress the side reactions. The interface modification resulted in a better Li/LSiPS/Li cyclic performance for 1800 h at 0.2 mA/cm2 and 500 h at 1.0 mA/cm2. All-solid-state lithium-metal batteries (ASSLIB) have been developed against a high-voltage cathode (LCMO-coated LCO) and showed an excellent cycling performance with a reversible capacity of ∼110 mAh/g after 300 cycles.

Immune response against subclinical haemonchosis in Himalayan hill goats.

Haemonchosis commonly occurs as chronic and subclinical infection in small ruminants, and understanding of immunological response against subclinical haemonchosis is of paramount importance for designing and implementing effective control strategies. The present study was designed to evaluate immunological response during subclinical haemonchosis, experimentally established in goats. Sixteen 5-6 month-old helminth naive kids were randomly allocated into one of two groups, infected and uninfected; the infected group being infected per os with 250 Haemonchus contortus larvae per kg body weight. Faecal, blood and serum samples were collected every third day up to 30 days post-infection (DPI), thereafter weekly up to 58 DPI to record changes in faecal egg count (FEC), haemoglobin (Hb), packed cell volume (PCV), peripheral eosinophil percentage and immunological parameters, such as macrophage cytokine interleukin-12 (IL-12), Th1 cytokine (IFN-γ), Th2 cytokines (IL-4, 13, 25, 33) and immunoglobulins (IgG and IgE). Pre-patent period of H. contortus in the present study was 18 days and eggs per gram (EPG) peaked on 30 DPI. The total reduction in body weight gain in the infected group was 26 g per day when compared with uninfected animals. Hb (7.35 ± 0.34 g/dL in infected animals compared with 9.76 ± 0.67 in control animals) and PCV levels (22 ± 1.54 g/dL in infected animals compared with 29.2 ± 1.27 in control animals) decreased significantly up to 44 DPI in infected group (P = 0.000). IL-4, IL-13, IL-33, IgG and IgE showed significant increase in infected animals at different periods. IFN-γ, IL-12 and IL-25 did not show any significant changes barring a steep rise of IFN-γ on 27 DPI. A positive correlation was observed between IgE and IL-4 in subclinical haemonchosis. Of particular note was that all the major cytokines, such as IFN-γ (P = 0.000), IL-4 (P = 0.000), IL-13 (P = 0.009), and both IgG (P = 0.000) and IgE (P = 0.003), were observed at the lowest concentration on 24 DPI. The effect of infection was found to be significant on cytokines with a strong interaction with time. Taken together, the data suggest that Th2 immune response is predominating in subclinical haemonchosis. The economic loss in term of body weight gain due to subclinical haemonchosis was considerable.