RESUMO
Two-dimensional covalent organic frameworks (2D COFs) are synthetically diverse, layered macromolecules. Their covalent lattices are thought to confer high thermal stability, which is typically evaluated with thermogravimetric analysis (TGA). However, TGA measures the temperature at which volatile degradation products are formed and is insensitive to changes of the periodic structure of the COF. Here, we study the thermal stability of ten 2D COFs using a combination of variable-temperature X-ray diffraction, TGA, diffuse reflectance infrared spectroscopy, and density functional theory calculations. We find that 2D COFs undergo a general two-step thermal degradation process. At the first degradation temperature, 2D COFs lose their crystallinity without chemical degradation. Then, at higher temperatures, they chemically degrade into volatile byproducts. Several trends emerge from this exploration of 2D COF stability. Boronate ester-linked COFs are generally more thermally stable than comparable imine-linked COFs. Smaller crystalline lattices are more robust to thermal degradation than chemically similar larger lattices. Finally, pore-functionalized COFs degrade at significantly lower temperatures than their unfunctionalized analogues. These trends offer design criteria for thermally resilient 2D COF materials. These findings will inform and encourage a broader exploration of mechanical deformation in 2D networks, providing a necessary step towards their practical use.
RESUMO
Emergent quantum phenomena in electronically coupled two-dimensional heterostructures are central to next-generation optical, electronic, and quantum information applications. Tailoring electronic band gaps in coupled heterostructures would permit control of such phenomena and is the subject of significant research interest. Two-dimensional polymers (2DPs) offer a compelling route to tailored band structures through the selection of molecular constituents. However, despite the promise of synthetic flexibility and electronic design, fabrication of 2DPs that form electronically coupled 2D heterostructures remains an outstanding challenge. Here, we report the rational design and optimized synthesis of electronically coupled semiconducting 2DP/2D transition metal dichalcogenide van der Waals heterostructures, demonstrate direct exfoliation of the highly crystalline and oriented 2DP films down to a few nanometers, and present the first thickness-dependent study of 2DP/MoS2 heterostructures. Control over the 2DP layers reveals enhancement of the 2DP photoluminescence by two orders of magnitude in ultrathin sheets and an unexpected thickness-dependent modulation of the ultrafast excited state dynamics in the 2DP/MoS2 heterostructure. These results provide fundamental insight into the electronic structure of 2DPs and present a route to tune emergent quantum phenomena in 2DP hybrid van der Waals heterostructures.
Assuntos
Dissulfetos/química , Elétrons , Molibdênio/química , Polímeros/química , Modelos Moleculares , Conformação MolecularRESUMO
Electrochemical energy conversion requires electrodes that can simultaneously facilitate substrate bond activation and electron-proton charge transfer. Traditional electrodes co-localize both functions to a single solid|liquid interface even though each process is typically favored in a disparate reaction environment. Herein, we establish a strategy for spatially separating bond activation and charge transfer by exploiting mixed electron-proton conduction (MEPC) in an oxide membrane. Specifically, we interpose a MEPC WOx membrane between a Pt catalyst and aqueous electrolyte and show that this composite electrode is active for the hydrogen oxidation reaction (HOR). Consistent with H2 activation occurring at the gas|solid interface, the composite electrode displays HOR current densities over 8-fold larger than the diffusion-limited rate of HOR catalysis at a singular Pt|solution interface. The segregation of bond activation and charge separation steps also confers excellent tolerance to poisons and impurities introduced to the electrolyte. Mechanistic studies establish that H2 activation at the Pt|gas interface is coupled to the electron-proton charge separation at the WOx|solution interface via rapid H-diffusion in the bulk of the WOx. Consequently, the rate of HOR is principally controlled by the rate of H-spillover at the Pt|WOx boundary. Our results establish MEPC membrane electrodes as a platform for spatially separating the critical bond activation and charge transfer steps of electrocatalysis.
Assuntos
Elétrons , Hidrogênio/química , Oxigênio/química , Prótons , Tungstênio/química , Catálise , Técnicas Eletroquímicas , Eletrodos , OxirreduçãoRESUMO
Per- and polyfluorinated alkyl substances (PFAS), such as perfluorooctanoic acid (PFOA), perfluorooctanesulfonate (PFOS), and ammonium perfluoro-2-propoxypropionate (GenX), contaminate ground and surface waters throughout the world. The cost and performance limitations of current PFAS removal technologies motivate efforts to develop selective and high-affinity adsorbents. Covalent organic frameworks (COFs) are unexplored yet promising adsorbents because of their high surface area and tunable pore sizes. Here we show that imine-linked two-dimensional (2D) COFs bearing primary amines adsorb GenX rapidly at environmentally relevant concentrations. COFs with partial amine incorporation showed the highest capacity and fastest removal, suggesting that the synergistic combination of the polar group and hydrophobic surfaces are responsible for GenX binding. A COF with 28% amine loading also removed more than 90% of 12 out of 13 PFAS. These results demonstrate the promise of COFs for PFAS removal and suggest design criteria for maximizing adsorbent performance.
RESUMO
Macrocycles based on directional bonding and dynamic covalent bond exchange can be designed with specific pore shapes, sizes, and functionality. These systems retain many of the design criteria and desirable aspects of two-dimensional (2D) covalent organic frameworks (COFs) but are more easily processed. Here we access discrete hexagonal imine-linked macrocycles by condensing a truncated analogue of 1,3,5-tris(4-aminophenyl)benzene (TAPB) with terephthaldehyde (PDA). The monomers first condense into polymers but eventually convert into hexagonal macrocycles in high yield. The high selectivity for hexagonal macrocycles is enforced by their aggregation and crystallization into layered structures with more sluggish imine exchange. Their formation and exchange processes provide new insight into how imine-linked 2D COF simultaneously polymerize and crystallize. Solutions of these assembled macrocycles were cast into oriented, crystalline films, expanding the potential routes to 2D materials.
RESUMO
Two-dimensional covalent organic frameworks (2D COFs) are crystalline polymer networks whose modular 2D structures and permanent porosity motivate efforts to integrate them into sensing, energy storage, and optoelectronic devices. These applications require forming the material as a thin film instead of a microcrystalline powder, which has been achieved previously by including a substrate in the reaction mixture. This approach suffers from two key drawbacks: COF precipitates form concurrently and contaminate the film, and variable monomer and oligomer concentrations during the polymerization provide poor control over film thickness. Here we address these challenges by growing 2D COF thin films under continuous flow conditions. Initially homogeneous monomer solutions polymerize while pumped through heated tubing for a given residence time, after which they pass over a substrate. When the residence time and conditions are chosen judiciously, 2D COF powders form downstream of the substrate, and the chemical composition of the solution at the substrate remains constant. COF films grown in flow exhibit constant rates of mass deposition, enabling thickness control as well as access to thicker films than are available from previous static growth procedures. Notably, the crystallinity of COF films is observed only at longer residence times, suggesting that oligomeric and polymeric species play an important role in forming the 2D COF lattice. This approach, which we demonstrate for four different frameworks, is both a simple and powerful method to control the formation of COF thin films.
Assuntos
Compostos Orgânicos/química , Cinética , PolimerizaçãoRESUMO
Electrochemical proton-coupled electron transfer (PCET) reactions can proceed via an outer-sphere electron transfer to solution (OS-PCET) or through an inner-sphere mechanism by interfacial polarization of surface-bound active sites (I-PCET). Although OS-PCET has been extensively studied with molecular insight, the inherent heterogeneity of surfaces impedes molecular-level understanding of I-PCET. Herein we employ graphite-conjugated carboxylic acids (GC-COOH) as molecularly well-defined hosts of I-PCET to isolate the intrinsic kinetics of I-PCET. We measure I-PCET rates across the entire pH range, uncovering a V-shaped pH-dependence that lacks the pH-independent regions characteristic of OS-PCET. Accordingly, we develop a mechanistic model for I-PCET that invokes concerted PCET involving hydronium/water or water/hydroxide donor/acceptor pairs, capturing the entire dataset with only four adjustable parameters. We find that I-PCET is fourfold faster with hydronium/water than water/hydroxide, while both reactions display similarly high charge transfer coefficients, indicating late proton transfer transition states. These studies highlight the key mechanistic distinctions between I-PCET and OS-PCET, providing a framework for understanding and modelling more complex multistep I-PCET reactions critical to energy conversion and catalysis.
RESUMO
Polymerization of monomers into periodic two-dimensional networks provides structurally precise, layered macromolecular sheets that exhibit desirable mechanical, optoelectronic, and molecular transport properties. Two-dimensional covalent organic frameworks (2D COFs) offer broad monomer scope but are generally isolated as powders comprising aggregated nanometer-scale crystallites. We found that 2D COF formation could be controlled using a two-step procedure in which monomers are added slowly to preformed nanoparticle seeds. The resulting 2D COFs are isolated as single-crystalline, micrometer-sized particles. Transient absorption spectroscopy of the dispersed COF nanoparticles revealed improvement in signal quality by two to three orders of magnitude relative to polycrystalline powder samples, and suggests exciton diffusion over longer length scales than those obtained through previous approaches. These findings should enable a broad exploration of synthetic 2D polymer structures and properties.
RESUMO
The simultaneous polymerization and crystallization of monomers featuring directional bonding designs provides covalent organic frameworks (COFs), which are periodic polymer networks with robust covalent bonds arranged in two- or three-dimensional topologies. The range of properties characterized in COFs has rapidly expanded to include those of interest for heterogeneous catalysis, energy storage and photovoltaic devices, and proton-conducting membranes. Yet many of these applications will require materials quality, morphological control, and synthetic efficiency exceeding the capabilities of contemporary synthetic methods. This level of control will emerge from an improved fundamental understanding of COF nucleation and growth processes. More powerful characterization of structure and defects, improved syntheses guided by mechanistic understanding, and accessing diverse isolated forms, ranging from single crystals to thin films to colloidal suspensions, remain important frontier problems.
RESUMO
Covalent organic frameworks (COFs) are two- or three-dimensional (2D or 3D) polymer networks with designed topology and chemical functionality, permanent porosity, and high surface areas. These features are potentially useful for a broad range of applications, including catalysis, optoelectronics, and energy storage devices. But current COF syntheses offer poor control over the material's morphology and final form, generally providing insoluble and unprocessable microcrystalline powder aggregates. COF polymerizations are often performed under conditions in which the monomers are only partially soluble in the reaction solvent, and this heterogeneity has hindered understanding of their polymerization or crystallization processes. Here we report homogeneous polymerization conditions for boronate ester-linked, 2D COFs that inhibit crystallite precipitation, resulting in stable colloidal suspensions of 2D COF nanoparticles. The hexagonal, layered structures of the colloids are confirmed by small-angle and wide-angle X-ray scattering, and kinetic characterization provides insight into the growth process. The colloid size is modulated by solvent conditions, and the technique is demonstrated for four 2D boronate ester-linked COFs. The diameter of individual COF nanoparticles in solution is monitored and quantified during COF growth and stabilization at elevated temperature using in situ variable-temperature liquid cell transmission electron microscopy imaging, a new characterization technique that complements conventional bulk scattering techniques. Solution casting of the colloids yields a free-standing transparent COF film with retained crystallinity and porosity, as well as preferential crystallite orientation. Collectively this structural control provides new opportunities for understanding COF formation and designing morphologies for device applications.
RESUMO
The low conductivity of two-dimensional covalent organic frameworks (2D COFs), and most related coordination polymers, limits their applicability in optoelectronic and electrical energy storage (EES) devices. Although some networks exhibit promising conductivity, these examples generally lack structural versatility, one of the most attractive features of framework materials design. Here we enhance the electrical conductivity of a redox-active 2D COF film by electropolymerizing 3,4-ethylenedioxythiophene (EDOT) within its pores. The resulting poly(3,4-ethylenedioxythiophene) (PEDOT)-infiltrated COF films exhibit dramatically improved electrochemical responses, including quantitative access to their redox-active groups, even for 1 µm-thick COF films that otherwise provide poor electrochemical performance. PEDOT-modified COF films can accommodate high charging rates (10-1600 C) without compromising performance and exhibit both a 10-fold higher current response relative to unmodified films and stable capacitances for at least 10â¯000 cycles. This work represents the first time that electroactive COFs or crystalline framework materials have shown volumetric energy and power densities comparable with other porous carbon-based electrodes, thereby demonstrating the promise of redox-active COFs for EES devices.
RESUMO
Two-dimensional covalent organic frameworks (2D COFs) are ideally suited for organizing redox-active subunits into periodic, permanently porous polymer networks of interest for pseudocapacitive energy storage. Here we describe a method for synthesizing crystalline, oriented thin films of a redox-active 2D COF on Au working electrodes. The thickness of the COF film was controlled by varying the initial monomer concentration. A large percentage (80-99%) of the anthraquinone groups are electrochemically accessible in films thinner than 200 nm, an order of magnitude improvement over the same COF prepared as a randomly oriented microcrystalline powder. As a result, electrodes functionalized with oriented COF films exhibit a 400% increase in capacitance scaled to electrode area as compared to those functionalized with the randomly oriented COF powder. These results demonstrate the promise of redox-active COFs for electrical energy storage and highlight the importance of controlling morphology for optimal performance.