Detection of SARS-CoV-2 spike protein D614G mutation using µTGGE.

BACKGROUND: The accurate and expeditious detection of SARS-CoV-2 mutations is critical for monitoring viral evolution, assessing its impact on transmission, virulence, and vaccine efficacy, and formulating public health interventions. In this study, a detection system utilizing micro temperature gradient gel electrophoresis (µTGGE) was developed for the identification of the D614 and G614 variants of the SARS-CoV-2 spike protein. METHODS: The in vitro synthesized D614 and G614 gene fragments of the SARS-CoV-2 spike protein were amplified via polymerase chain reaction and subjected to µTGGE analysis. RESULTS: The migration patterns exhibited by the D614 and G614 variants on the polyacrylamide gel were distinctly dissimilar and readily discernible by µTGGE. In particular, the mid-melting pattern of D614 was shorter than that of G614. CONCLUSIONS: Our results demonstrate the capability of µTGGE for the rapid, precise, and cost-effective detection of SARS-CoV-2 spike protein D614 and G614 variants without the need for sequencing. Therefore, this approach holds considerable potential for use in point-of-care mutation assays for SARS-CoV-2 and other pathogens.

Optimization of reaction condition of recombinase polymerase amplification to detect SARS-CoV-2 DNA and RNA using a statistical method.

Recombinase polymerase amplification (RPA) is an isothermal reaction that amplifies a target DNA sequence with a recombinase, a single-stranded DNA-binding protein (SSB), and a strand-displacing DNA polymerase. In this study, we optimized the reaction conditions of RPA to detect SARS-CoV-2 DNA and RNA using a statistical method to enhance the sensitivity. In vitro synthesized SARS-CoV-2 DNA and RNA were used as targets. After evaluating the concentration of each component, the uvsY, gp32, and ATP concentrations appeared to be rate-determining factors. In particular, the balance between the binding and dissociation of uvsX and DNA primer was precisely adjusted. Under the optimized condition, 60 copies of the target DNA were specifically detected. Detection of 60 copies of RNA was also achieved. Our results prove the fabrication flexibility of RPA reagents, leading to an expansion of the use of RPA in various fields.

'Head-to-Head' mRNA display for the translation of multi-copied proteins with a free C-terminus.

With the development of various methods for affinity-based selection of proteins such as phage display, ribosomal display, and mRNA display, the progress in this field has been gradually shifting to function-based selection, such as through single-molecule observation, genetic selection, and compartmentalization technologies. In this vein, we present an opposite link mode of mRNA display termed as a 'Head-to-Head' (H2H) link. The key technique in H2H, formation of a covalent bond between O6-benzylguanine (BG) and O6-alkylguanine-DNA alkyltransferase (AGT), was demonstrated to be workable in H2H ligation, where mRNA is linked to a nascent AGT via a BG-DNA linker, resulting in a "(C-terminus) protein-BG-DNA linker-mRNA (5'-terminus)" conjugate. Thus, a head (N-terminus) to head (5'-terminus) linkage is formed. Among the advantages of H2H, the generation of multi-copied proteins is the most promising and was proven to be possible owing to the restored stop codon, which had been intentionally removed in the conventional mRNA display. Another advantage is obviously having a free C-terminus of the protein, which can be used for modifications such as C-terminal methylation, α-amidation, and others, which occur in nature. A superior merit of H2H is that it makes it possible to use a single construct commonly in mRNA display (affinity-based) and compartmentalization technologies (function-based) without requiring complicated construct changes.

DEP-On-Go for Simultaneous Sensing of Multiple Heavy Metals Pollutants in Environmental Samples.

We describe a simple and affordable "Disposable electrode printed (DEP)-On-Go" sensing platform for the rapid on-site monitoring of trace heavy metal pollutants in environmental samples for early warning by developing a mobile electrochemical device composed of palm-sized potentiostat and disposable unmodified screen-printed electrode chips. We present the analytical performance of our device for the sensitive detection of major heavy metal ions, namely, mercury, cadmium, lead, arsenic, zinc, and copper with detection limits of 1.5, 2.6, 4.0, 5.0, 14.4, and, 15.5 µg·L-1, respectively. Importantly, the utility of this device is extended to detect multiple heavy metals simultaneously with well-defined voltammograms and similar sensitivity. Finally, "DEP-On-Go" was successfully applied to detect heavy metals in real environmental samples from groundwater, tap water, house dust, soil, and industry-processed rice and noodle foods. We evaluated the efficiency of this system with a linear correlation through inductively coupled plasma mass spectrometry, and the results suggested that this system can be reliable for on-site screening purposes. On-field applications using real samples of groundwater for drinking in the northern parts of India support the easy-to-detect, low-cost (<1 USD), rapid (within 5 min), and reliable detection limit (ppb levels) performance of our device for the on-site detection and monitoring of multiple heavy metals in resource-limited settings.

Real-Time On-Site Monitoring of Viruses in Wastewater Using Nanotrap® Particles and RICCA Technologies.

Wastewater-based epidemiology (WBE) is an effective and efficient tool for the early detection of infectious disease outbreaks in a community. However, currently available methods are laborious, costly, and time-consuming due to the low concentration of viruses and the presence of matrix chemicals in wastewater that may interfere with molecular analyses. In the present study, we designed a highly sensitive "Quick Poop (wastewater with fecal waste) Sensor" (termed, QPsor) using a joint approach of Nanotrap microbiome particles and RICCA (RNA Isothermal Co-Assisted and Coupled Amplification). Using QPsor, the WBE study showed a strong correlation with standard PEG concentrations and the qPCR technique. Using a closed format for a paper-based lateral flow assay, we were able to demonstrate the potential of our assay as a real-time, point-of-care test by detecting the heat-inactivated SARS-CoV-2 virus in wastewater at concentrations of 100 copies/mL and within one hour. As a proof-of-concept demonstration, we analyzed the presence of viral RNA of the SARS-CoV-2 virus and PMMoV in raw wastewater samples from wastewater treatment plants on-site and within 60 min. The results show that the QPsor method can be an effective tool for disease outbreak detection by combining an AI-enabled case detection model with real-time on-site viral RNA extraction and amplification, especially in the absence of intensive clinical laboratory facilities. The lab-free, lab-quality test capabilities of QPsor for viral prevalence and transmission in the community can contribute to the efficient management of pandemic situations.

Rapid and Highly Sensitive Detection of Leishmania by Combining Recombinase Polymerase Amplification and Solution-Processed Oxide Thin-Film Transistor Technology.

Nucleic acid detection is widely used to identify infectious diseases and ensure food safety. However, conventional PCR-based techniques are time consuming. Thus, this study aims to combine recombinase polymerase amplification (RPA), which enables the rapid amplification of even trace amounts of nucleic acid fragments within 10-40 min at 37-42 °C, and solution-processed oxide thin-film transistor (TFT) technology, which exhibits high detection sensitivity, to detect Leishmania. A single-stranded anti-probe was incorporated into the RPA primer to facilitate effective hybridization between the RPA product and the immobilized probe on the solution-processed oxide TFT. The RPA-amplified product carrying an anti-probe enabled specific binding to the chip surface. Changes in current were monitored before and after sample incubation to identify the target nucleic acids in the samples accurately. The proposed method achieved a remarkable limit of detection of 101 copies/µL of the Leishmania HSP70 fragment within 30 min. The design of the probes on the solution-processed oxide TFT surface and the anti-probe simplified the detection of other target nucleic acids, eliminating the need to denature DNA double-strands for specific binding during nucleic acid detection. Thus, the novel method offers the advantage of requiring minimal reagent resources and eliminates the need for complex procedures.

Biophysical Properties of the Fibril Structure of the Toxic Conformer of Amyloid-ß42: Characterization by Atomic Force Microscopy in Liquid and Molecular Docking.

Alzheimer's disease is associated with the aggregation of the misfolded neuronal peptide, amyloid-ß42 (Aß42). Evidence has suggested that several reasons are responsible for the toxicity caused by the aggregation of Aß42, including the conformational restriction of Aß42. In this study, one of the toxic conformers of Aß42, which contains a Glu-to-Pro substitution (E22P-Aß42), was explored using atomic force microscopy and molecular docking to study the aggregation dynamics. We proposed a systematic model of fibril formation to better understand the molecular basis of conformational transitions in the Aß42 species. Our results demonstrated the formation of amorphous aggregates in E22P-Aß42 that are stem-based, network-like structures, while the formation of mature fibrils occurred in the less toxic conformer of Aß42, E22-Aß42, that are sphere-like flexible structures. A comparison was made between the biophysical properties of E22P-Aß42 and E22-Aß42 that revealed that E22P-Aß42 had greater stiffness, dihedral angle, number of ß sheets involved, and elasticity, compared with E22-Aß42. These findings will have considerable implications toward our understanding of the structural basis of the toxicity caused by conformational diversity in Aß42 species.

Novel DNA Aptamer for CYP24A1 Inhibition with Enhanced Antiproliferative Activity in Cancer Cells.

Overexpression of the vitamin D3-inactivating enzyme CYP24A1 (cytochrome P450 family 24 subfamily and hereafter referred to as CYP24) can cause chronic kidney diseases, osteoporosis, and several types of cancers. Therefore, CYP24 inhibition has been considered a potential therapeutic approach. Vitamin D3 mimetics and small molecule inhibitors have been shown to be effective, but nonspecific binding, drug resistance, and potential toxicity limit their effectiveness. We have identified a novel 70-nt DNA aptamer-based inhibitor of CYP24 by utilizing the competition-based aptamer selection strategy, taking CYP24 as the positive target protein and CYP27B1 (the enzyme catalyzing active vitamin D3 production) as the countertarget protein. One of the identified aptamers, Apt-7, showed a 5.8-fold higher binding affinity with CYP24 than the similar competitor CYP27B1. Interestingly, Apt-7 selectively inhibited CYP24 (the relative CYP24 activity decreased by 39.1 ± 3% and showed almost no inhibition of CYP27B1). Furthermore, Apt-7 showed cellular internalization in CYP24-overexpressing A549 lung adenocarcinoma cells via endocytosis and induced endogenous CYP24 inhibition-based antiproliferative activity in cancer cells. We also employed high-speed atomic force microscopy experiments and molecular docking simulations to provide a single-molecule explanation of the aptamer-based CYP24 inhibition mechanism. The novel aptamer identified in this study presents an opportunity to generate a new probe for the recognition and inhibition of CYP24 for biomedical research and could assist in the diagnosis and treatment of cancer.

Gel shift selection of translation enhancer sequences using messenger RNA display.

We designed a new approach for selection of translation enhancer sequences that enables efficient protein synthesis in cell-free systems. The selection is based on a gel shift assay of a messenger RNA (mRNA)-protein fusion product that is synthesized in a cell-free translation system using an mRNA display method. A library of randomized 20-nt-long sequences, with all possible combinations of the four nucleotides, upstream of a coding region was screened by successive rounds of screening in which the translation time of the succeeding round was reduced compared with the previous round. An efficient translation enhancer sequence capable of more rapid initiation of cell-free protein synthesis, with a minimal translation time of 5 min, than a natural longer enhancer sequence (Xenopus ß-globin 5'UTR) was selected using rabbit reticulocyte extract as a model cell-free translation system. Furthermore, a successful screening of cap-independent translation enhancer sequence and a significant sequence similarity of the selected candidates validated the efficiency of the combined mRNA display and gel shift assay method for the rapid development of advanced cell-free translation systems.

cDNA display: a novel screening method for functional disulfide-rich peptides by solid-phase synthesis and stabilization of mRNA-protein fusions.

We report a robust display technology for the screening of disulfide-rich peptides, based on cDNA-protein fusions, by developing a novel and versatile puromycin-linker DNA. This linker comprises four major portions: a 'ligation site' for T4 RNA ligase, a 'biotin site' for solid-phase handling, a 'reverse transcription primer site' for the efficient and rapid conversion from an unstable mRNA-protein fusion (mRNA display) to a stable mRNA/cDNA-protein fusion (cDNA display) whose cDNA is covalently linked to its encoded protein and a 'restriction enzyme site' for the release of a complex from the solid support. This enables not only stabilizing mRNA-protein fusions but also promoting both protein folding and disulfide shuffling reactions. We evaluated the performance of cDNA display in different model systems and demonstrated an enrichment efficiency of 20-fold per selection round. Selection of a 32-residue random library against interleukin-6 receptor generated novel peptides containing multiple disulfide bonds with a unique linkage for its function. The peptides were found to bind with the target in the low nanomolar range. These results show the suitability of our method for in vitro selections of disulfide-rich proteins and other potential applications.

Development of robust isothermal RNA amplification assay for lab-free testing of RNA viruses.

Simple tests of infectiousness that return results in minutes and directly from samples even with low viral loads could be a potential game-changer in the fight against COVID-19. Here, we describe an improved isothermal nucleic acid amplification assay, termed the RICCA (RNA Isothermal Co-assisted and Coupled Amplification) reaction, that consists of a simple one-pot format of 'sample-in and result-out' with a primary focus on the detection of low copy numbers of RNA virus directly from saliva without the need for laboratory processing. We demonstrate our assay by detecting 16S rRNA directly from E. coli cells with a sensitivity as low as 8 CFU/µL and RNA fragments from a synthetic template of SARS-CoV-2 with a sensitivity as low as 1740 copies/µL. We further demonstrate the applicability of our assay for real-time testing at the point of care by designing a closed format for paper-based lateral flow assay and detecting heat-inactivated SARS-COV-2 virus in human saliva at concentrations ranging from 28,000 to 2.8 copies/µL with a total assay time of 15-30 min.

Competitive non-SELEX for the selective and rapid enrichment of DNA aptamers and its use in electrochemical aptasensor.

The SELEX (Systematic Evolution of Ligands by EXponential enrichment) method has been used successfully since 1990, but work is still required to obtain highly specific aptamers. Here, we present a novel approach called 'Competitive non-SELEX' (and termed as 'SELCOS' (Systematic Evolution of Ligands by COmpetitive Selection)) for readily obtaining aptamers that can discriminate between highly similar targets. This approach is based on the theoretical background presented here, in which under the co-presence of two similar targets, a specific binding type can be enriched more than a nonspecifically binding one during repetitive steps of partitioning with no PCR amplification between them. This principle was experimentally confirmed by the selection experiment for influenza virus subtype-specific DNA aptamers. Namely, the selection products (pools of DNA aptamers) obtained by SELCOS were subjected to a DEPSOR-mode electrochemical sensor, enabling the method to select subtype-specific aptamer pools. From the clonal analysis of these pools, only a few rounds of in vitro selection were sufficient to achieve the surprisingly rapid enrichment of a small number of aptamers with high selectivity, which could be attributed to the SELCOS principle and the given selection pressure program. The subtype-specific aptamers obtained in this manner had a high affinity (e.g., KD = 82 pM for H1N1; 88 pM for H3N2) and negligible cross-reactivity. By making the H1N1-specific DNA aptamer a sensor unit of the DEPSOR electrochemical detector, an influenza virus subtype-specific and portable detector was readily constructed, indicating how close it is to the field application goal.

Solid-phase translation and RNA-protein fusion: a novel approach for folding quality control and direct immobilization of proteins using anchored mRNA.

A novel cell-free translation system is described in which template-mRNA molecules were captured onto solid surfaces to simultaneously synthesize and immobilize proteins in a more native-state form. This technology comprises a novel solid-phase approach to cell-free translation and RNA-protein fusion techniques. A newly constructed biotinylated linker-DNA which enables puromycin-assisted RNA-protein fusion is ligated to the 3' ends of the mRNA molecules to attach the mRNA-template on a streptavidin-coated surface and further to enable the subsequent reactions of translation and RNA-protein fusion on surface. The protein products are therefore directly immobilized onto solid surfaces and furthermore were discovered to adopt a more native state with proper protein folding and superior biological activity compared with conventional liquid-phase approaches. We further validate this approach via the production of immobilized green fluorescent protein (GFP) on microbeads and by the production and assay of aldehyde reductase (ALR) enzyme with 4-fold or more activity. The approach developed in this study may enable to embrace the concept of the transformation of 'RNA chip-to-protein chip' using a solid-phase cell-free translation system and thus to the development of high-throughput microarray platform in the field of functional genomics and in vitro evolution.

Prevention of alcohol-induced DNA damage by a proprietary glycyrrhizin/D-mannitol product: A randomized, placebo-controlled, cross-over human study.

OBJECTIVES: The purpose of the present study was to evaluate the ability of a proprietary combination of glycyrrhizin and D-mannitol to protect against oxidative damage to DNA associated with acute alcohol consumption by human subjects in a randomized, placebo-controlled cross-over designed study. Excessive alcohol consumption is associated with numerous diseases. Alcohol has been shown to generate reactive oxygen species that can result in DNA damage, leading to genetic and epigenetic changes. METHODS: A total of 25 subjects (13 male and 12 female) were enrolled. Alcohol intake in the form of vodka (40% ethanol) was adjusted based on 1.275 g of 100% ethanol/kg body weight for men and 1.020 g/kg body weight for women, which was consumed with and without the study product. Blood samples were drawn at 2 h after alcohol consumption, lymphocytes were isolated, and were subjected to DNA comet electrophoresis on a blinded basis. RESULTS: Acute alcohol consumption increased lymphocyte DNA damage by approximately 8.36%. Co-consumption of the glycyrrhizin/D-mannitol study product with alcohol reduced DNA damage to baseline levels. No adverse effects were associated with use of the study product, and no differences were observed in blood alcohol concentrations in the presence or absence of the study product in males and females. CONCLUSIONS: Acute alcohol ingestion resulted in measurable increases in DNA damage, which were prevented by the addition of the proprietary glycyrrhizin/D-mannitol (NTX®) study product to the alcohol, suggesting that the tissue-damaging effects of alcohol consumption can be ameliorated.

Peptide aptamer-modified single-walled carbon nanotube-based transistors for high-performance biosensors.

Biosensors employing single-walled carbon nanotube field-effect transistors (SWCNT FETs) offer ultimate sensitivity. However, besides the sensitivity, a high selectivity is critically important to distinguish the true signal from interference signals in a non-controlled environment. This work presents the first demonstration of the successful integration of a novel peptide aptamer with a liquid-gated SWCNT FET to achieve highly sensitive and specific detection of Cathepsin E (CatE), a useful prognostic biomarker for cancer diagnosis. Novel peptide aptamers that specifically recognize CatE are engineered by systemic in vitro evolution. The SWCNTs were firstly grown using the thermal chemical vapor deposition (CVD) method and then were employed as a channel to fabricate a SWCNT FET device. Next, the SWCNTs were functionalized by noncovalent immobilization of the peptide aptamer using 1-pyrenebutanoic acid succinimidyl ester (PBASE) linker. The resulting FET sensors exhibited a high selectivity (no response to bovine serum albumin and cathepsin K) and label-free detection of CatE at unprecedentedly low concentrations in both phosphate-buffered saline (2.3 pM) and human serum (0.23 nM). Our results highlight the use of peptide aptamer-modified SWCNT FET sensors as a promising platform for near-patient testing and point-of-care testing applications.

A bulk sub-femtoliter in vitro compartmentalization system using super-fine electrosprays.

The extreme miniaturization of biological and chemical assays in aqueous-droplet compartments enables spatiotemporal control for large-scale parallel experimentation and can thus permit new capabilities for "digitizing" directed molecular evolution methodologies. We report a remarkably facile bulk method to generate mega-scale monodisperse sub-femtoliter aqueous droplets by electrospray, using a prototype head with super-fine inkjet technology. Moreover, the electrostatic inkjet nozzle that injects the aqueous phase when immersed within an immiscible phase (an optimized oil/surfactant mixture) has the advantage of generating cell-like sub-femtoliter compartments for biomolecule encapsulation and successive biological and chemical reactions. Sub-femtoliter droplets of both liquid (water-in-oil, volumes ranging from 0.2 to 6.4 fL) and gel bead (agarose-in-oil, volume ranging from 0.3 to 15.6 fL) compartments with average sizes of 1.3 µm and 1.5 µm, respectively, were successfully generated using an inkjet nozzle at a speed of more than 10(5) droplets per second. We demonstrated the applicability of this system by synthesizing fluorescent proteins using a cell-free expression system inside electrosprayed sub-femtoliter droplets at an accelerated rate, thereby extending the utility of in vitro compartmentalization with improved analytical performance for a top-down artificial cellular system.

PEP-on-DEP: A competitive peptide-based disposable electrochemical aptasensor for renin diagnostics.

Antibody-based immunosensors are relatively less accessible to a wide variety of unreachable targets, such as low-molecular-weight biomarkers that represent a rich untapped source of disease-specific diagnostic information. Here, we present a peptide aptamer-based electrochemical sensor technology called 'PEP-on-DEP' to detect less accessible target molecules, such as renin, and to improve the quality of life. Peptide-based aptamers represent a relatively smart class of affinity binders and show great promise in biosensor development. Renin is involved in the regulation of arterial blood pressure and is an emerging biomarker protein for predicting cardiovascular risk and prognosis. To our knowledge, no studies have described aptamer molecules that can be used as new potent probes for renin. Here, we describe a portable electrochemical biosensor platform based on the newly identified peptide aptamer molecules for renin. We constructed a randomized octapeptide library pool with diversified sequences and selected renin specific peptide aptamers using cDNA display technology. We identified a few peptide aptamer sequences with a KD in the µM binding affinity range for renin. Next, we grafted the selected peptide aptamers onto gold nanoparticles and detected renin in a one-step competitive assay using our originally developed DEP (Disposable Electrochemical Printed) chip and a USB powered portable potentiostat system. We successfully detected renin in as little as 300ngmL(-1) using the PEP-on-DEP method. Thus, the generation and characterization of novel probes for unreachable target molecules by merging a newly identified peptide aptamer with electrochemical transduction allowed for the development of a more practical biosensor that, in principle, can be adapted to develop a portable, low-cost and mass-producible biosensor for point-of-care applications.

Structural characterization of ultra-stable higher-ordered aggregates generated by novel guanine-rich DNA sequences.

Guanine-rich oligonucleotides (GROs) often show a strong tendency of self-aggregation based on G-quartets and thus form a family of stable higher-ordered structures such as G-wire. Such a structure is specially high-lighted due to the connection with the telomere structure, which is well known to be related with the regeneration mechanism of shortened chromosomal DNAs and to contain GRO repeats such as d(TTAGGG). In this paper, we analyze a new series of GROs by gel electrophoresis and circular dichroism and report a finding of a novel GRO sequence, d(G(11)T), which forms ultra-stable aggregates of higher-ordered structures. The structure of these aggregates was durable against the exposure to denaturants (8 M urea and 40% formamide) at the boiling temperature and even the treatment with an excess amount of nucleases, which was confirmed by assay of electrophoretic mobility. Systematic substitution of nucleotides was introduced to this sequence in order to examine the sequence effect on this phenomenon. Based on the facts thus revealed, we constructed a model for the aggregation phenomenon: successively attaching of a unitary G-quartet block through a switching of Hoogsteen-type pairing like a modular toy 'lego'. Whatever the true structure is, the unusual bonding characteristics and properties of the self-assembling of GROs must be exploited for various purposes related to nano-technology and thus worthy of further investigation from both scientific and technological interest.

Single-strand conformation polymorphism (SSCP) of oligodeoxyribonucleotides: an insight into solution structural dynamics of DNAs provided by gel electrophoresis and molecular dynamics simulations.

Studies on the solution structure dynamics of RNA/DNA are becoming crucially important. The phenomena of SSCP (single-strand conformation polymorphism), small RNA dynamics in a cell, and others can be related to the conformational changes of single-stranded (ss) RNAs/DNAs in solution. However, little is known about those dynamics. Only the intra-structural transition of ssDNAs in solution has been reported based on Watson-Crick (W-C) base-pairing. Here, we found a general feature of the SSCP phenomenon by studying the simpler molecules of ss-oligodeoxyribonucleotides. A single base substitution or a positional exchange of nucleotide in a highly homologous series of ss-dodecanucleotides led to a change in the mobility-in-gel. This was unexpected, since most of these nucleotides [such as d(A(11)G) or d(A(11)C)] have no possibility of forming W-C base-pairing. MD (molecular dynamics) experiments revealed differences in shape and size between the dynamic structures of these molecules which could affect their mobility-in-gel. In addition, a high correlation was observed between the electrophoretic mobility and the size-related parameters such as end-to-end distance obtained from MD simulations. Because the simulation was considerably shorter (nanosecond) than the experimental time-scale (second), the result must be considered conservatively; but it is nevertheless encouraging for utilizing MD simulation for structural analysis of oligonucleotides.