Membrane Fluidity as a New Means to Selectively Target Cancer Cells with Fusogenic Lipid Carriers.

Lipid-based carriers such as liposomes represent one of the most advanced classes of drug delivery systems. Their clinical success relies on their composition, similar to that of the cell membrane. Their cellular specificity often relies on a ligand-receptor interaction. Although differences in the physicochemical properties of the cell membrane between tumor and nontumor cells have been reported, they are not systematically used for drug delivery purposes. In this report, a new approach was developed to ensure selective targeting based on physical compatibility between the target and the carrier membranes. By modulating the liposome composition and thus its membrane fluidity, we achieved selective targeting on four cancer cell lines of varying aggressiveness. Furthermore, using membrane-embedded and inner core-encapsulated fluorophores, we assessed the mechanism of this interaction to be based on the fusion of the liposome with the cell membranes. Membrane fluidity is therefore a major parameter to be considered when designing lipid drug carriers as a promising, lower cost alternative to current targeting strategies based on covalent grafting.

Innovative Electrochemical Screening Allows Transketolase Inhibitors to Be Identified.

Transketolases (TKs) are ubiquitous thiamine pyrophosphate (TPP)-dependent enzymes of the nonoxidative branch of the pentose phosphate pathway. They are considered as interesting therapeutic targets in numerous diseases and infections (e.g., cancer, tuberculosis, malaria), for which it is important to find specific and efficient inhibitors. Current TK assays require important amounts of enzyme, are time-consuming, and are not specific. Here, we report a new high throughput electrochemical assay based on the oxidative trapping of the TK-TPP intermediate. After electrode characterization, the enzyme loading, electrochemical protocol, and substrate concentration were optimized. Finally, 96 electrochemical assays could be performed in parallel in only 7 min, which allows a rapid screening of TK inhibitors. Then, 1360 molecules of an in-house chemical library were screened and one early lead compound was identified to inhibit TK from E. coli with an IC50 of 63 µM and an inhibition constant ( KI) of 3.4 µM. The electrochemical assay was also used to propose an inhibition mechanism.

Adding Biomolecular Recognition Capability to 3D Printed Objects.

Three-dimensional (3D) printing technologies will impact the biosensor community in the near future, at both the sensor prototyping level and the sensing layer organization level. The present study aimed at demonstrating the capacity of one 3D printing technique, digital light processing (DLP), to produce hydrogel sensing layers with 3D shapes that are unattainable using conventional molding procedures. The first model of the sensing layer was composed of a sequential enzymatic reaction (glucose oxidase and peroxidase), which generated a chemiluminescent signal in the presence of glucose and luminol. Highly complex objects with assembly properties (fanciful ball, puzzle pieces, 3D pixels, propellers, fluidic and multicompartments) with mono-, di-, and tricomponents configurations were achieved, and the activity of the entrapped enzymes was demonstrated. The second model was a sandwich immunoassay protocol for the detection of brain natriuretic peptide. Here, highly complex propeller shape sensing layers were produced, and the recognition capability of the antibodies was elucidated. The present study opens then the path to a totally new field of development of multiplex sensing layers, printed separately and assembled on demand to create complex sensing systems.

Specific interaction to PIP2 increases the kinetic rate of membrane binding of VILIPs, a subfamily of Neuronal Calcium Sensors (NCS) proteins.

VIsinin-LIke Proteins (VILIPs) are a subfamily of the Neuronal Calcium Sensor (NCS) proteins, which possess both N-myristoylation and EF-hand motifs allowing for a putative 'calcium-myristoyl switch' regulation mechanism. It has previously been established that myristoyl conjugation increases the affinity of proteins for membranes, but, in many cases, a second feature such as a cluster of positively-charged residues is needed for stable membrane binding. The interaction of two members of this family, VILIP-1 and VILIP-3, with Langmuir monolayers as membrane models has been investigated in order to study the effects of both myristoylation and the highly basic region containing conserved poly-lysine residues on membrane association kinetics and binding properties. Results show that in the presence of calcium, N-myristoylation significantly increases the kinetic rate of VILIP adsorption to the membrane. Additionally, the proteins bind to negatively charged phospholipids independently of the conjugated myristate moiety. Besides the regulatory effect of calcium on the rate of binding presumably due to exposure of the myristoyl moiety ascribed to their putative 'calcium-myristoyl switch', VILIP-1 and -3 also engage specific interactions with biomimetic membranes containing phosphatidylinositol 4,5-bisphosphate (PIP2). The presence of PIP2 increases the membrane association rates of both VILIPs. Taken together, these results show the major kinetic role of N-myristoylation for membrane binding, and highlight the critical role of specific phosphoinositide interactions for membrane association of members of the VILIP family.

Directed evolution of a formate dehydrogenase for increased tolerance to ionic liquids reveals a new site for increasing the stability.

The formate dehydrogenase (FDH) from Candida boidinii is a well-known enzyme in biocatalysis for NADH regeneration. Nevertheless, it has low activity in a water-miscible ionic liquid (1,3-dimethylimidazolium dimethyl phosphate, [MMIm][Me2 PO4 ]). In this work, this enzyme was subjected to directed evolution by using error-prone PCR, and a mutant (N187S/T321S) displaying higher activity was obtained following selection based on the formazan-based colorimetric assay. The mutation N187S is responsible for improved activity both in aqueous solution and in [MMIm][Me2 PO4 ], through an enhancement of the kcat value by a factor of 5.8. Fluorescence experiments performed in the presence of a quenching agent revealed that the mutant does not unfold in the presence of 50 % (v/v) [MMIm][Me2 PO4 ] whereas the wild-type enzyme does. Molecular modelling revealed that the mutation is located at the monomer-monomer interface and causes an increase in the pKa of residue E163 from 4.8 to 5.5. Calculation of the pKa of this residue in other microbial FDHs showed that thermostable FDHs have a highly basic glutamate at this position (pKa up to 6.2). We have identified a new site for improving FDH thermostability and tolerance to ionic liquids, and it is linked to the local charge of the enzymes in this class.

Polyluminol/hydrogel composites as new electrochemiluminescent-active sensing layers.

This paper reports on electrochemiluminescent sensors and biosensors based on polyluminol/hydrogel composite sensing layers using chemical or biological membranes as hydrogel matrices. In this work, luminol is electropolymerized under near-neutral conditions onto screen-printed electrode (SPE)-supported hydrogel films. The working electrode coated with a hydrogel film is soaked in a solution containing monomeric luminol units, allowing the monomeric luminol units to diffuse inside the porous matrix to the electrode surface where they are electropolymerized by cyclic voltammetry (CV). Sensors and enzymatic biosensors for H2O2 and choline detection, respectively, have been developed, using choline oxidase (ChOD) as a model enzyme. In this case, hydrogel is used both as the enzymatic immobilization matrix and as a template for the electrosynthesis of polyluminol. The enzyme was immobilized by entrapment in the gel matrix during its formation before electropolymerization of the monomer. Several parameters have been optimized in terms of polymerization conditions, enzyme loading, and average pore size. Using calcium alginate or tetramethoxysilane (TMOS)-based silica as porous matrix, H2O2 and choline detection are reported down to micromolar concentrations with three orders of magnitude wide dynamic ranges starting from 4 × 10(-7) M. Polyluminol/hydrogel composites appear as suitable electrochemiluminescence (ECL)-active sensing layers for the design of new reagentless and disposable easy-to-use optical sensors and biosensors, using conventional TMOS-based silica gel or the more original and easier to handle calcium alginate, reported here for the first time in such a configuration, as the biocompatible hydrogel matrix.

A 96-well electrochemical method for the screening of enzymatic activities.

The rapid electrochemical screening of enzyme activities in bioelectronics is still a challenging issue. In order to solve this problem, we propose to use a 96-well electrochemical assay. This system is composed of 96 screen-printed electrodes on a printed circuit board adapted from a commercial system (carbon is used as the working electrode and silver chloride as the counter/reference electrode). The associated device allows for the measurements on the 96 electrodes to be performed within a few seconds. In this work, we demonstrate the validity of the screening method with the commercial laccase from the fungus Trametes versicolor. The signal-to-noise ratio (S/N) is found to be the best way to analyze the electrochemical signals. The S/N follows a saturation-like mechanism with a dynamic linear range of two decades ranging from 0.5 to 75 ng of laccase (corresponding to enzymatic activities from 62 × 10(-6) to 9.37 × 10(-3) µmol min(-1)) and a sensitivity of 3027 µg(-1) at +100 mV versus Ag/AgCl. Laccase inhibitors (azide and fluoride anions), pH optima, and interfering molecules could also be identified within a few minutes.

High-throughput multiplexed competitive immunoassay for pollutants sensing in water.

The present study described the development and evaluation of a new fully automated multiplex competitive immunoassay enabling the simultaneous detection of five water pollutants (okadaic acid (OA), 2-chloro-4-ethylamino-6-isopropylamino-1,3,5-triazine (atrazine), 2.4-dichlorophenoxyacetic acid (2,4-D), 2,4,6-trinitrotoluene (TNT), and 1,3,5-trinitroperhydro-1,3,5-triazine (RDX)). The technology is taking advantage of an optical-clear pressure-sensitive adhesive on which biomolecules can be immobilized and that can be integrated within a classical 96-well format. The optimization of the microarray composition and cross-reaction was performed using an original approach where probe molecules (haptens) were conjugated to different carriers such as protein (bovine serum albumin or ovalbumin), amino-functionalized latex beads, or dextran polymer and arrayed at the surface of the adhesive. A total of 17 different probes were then arrayed together with controls on the adhesive surface and screened toward their specific reactivity and cross-reactivity. Once optimized, the complete setup was used for the detection of the five target molecules (less than 3 h for 96 samples). Limits of detection of 0.02, 0.01, 0.01, 100, and 0.02 µg L(-1) were found for OA, atrazine, 2,4-D, TNT, and RDX, respectively. The proof of concept of the multiplex competitive detection (semiquantitative or qualitative) of the five pollutants was also demonstrated on 16 spiked samples.

Enhanced colorimetric detection on porous microarrays using in situ substrate production.

A new technique is reported for the enhanced colorimetric detection of multiplexed hybridization onto porous membrane-based microarrays. This approach combines the use of horseradish peroxidase (HRP) as a label together with a chromogen substrate and a local production of the hydrogen peroxide required for substrate oxidation. This in situ production of coreagent is obtained using glucose oxidase (GOx) directly immobilized within the microarray porous membrane mesh. The oxidation of glucose by the immobilized GOx produces hydrogen peroxide which itself enables the oxidation of TMB (3,3',5,5'-tetramethylbenzidine) by HRP and yields a blue precipitate on positive spots. Thanks to a coreagent overconcentration within the membrane, this design drastically surpasses the performances of the standard TMB/H(2)O(2) kit used for peroxidase label detection. The obtained target limit of detection is then 50 times lower (20 pM) than the one obtained with the standard kit approach, and the dynamic range expands at least one decade. Furthermore, the developed method was shown to compete well with the widely used alkaline phosphatase-BCIP (5-bromo-4-chloro-3-indolyl phosphate)/NBT (nitro blue tetrazolium chloride) readout while minimizing background signal. The method was finally successfully applied to the multiplex detection of single nucleotide polymorphisms (SNPs) in complex PCR samples. The background lowering was impacted here positively on the SNPs' detection by increasing the complementary/noncomplementary signal ratio.

Homogeneous assays using aptamers.

Aptamers are DNA or RNA oligonucleotides that can bind with high affinity and specificity to a wide range of targets such as proteins, metal ions or pathogenic microorganisms. Soluble aptamers and aptazymes have been used as sensing elements for developing homogeneous assays in a solution phase, the whole sensing process being carried out in a homogeneous solution. Contrary to most conventional heterogeneous assays that are time-consuming and labor-intensive, aptamer-based homogeneous assays are simple, easy-to-perform, rapid and do not require immobilization nor washing steps. To our knowledge, this review is the first entirely dedicated to aptamer-based homogeneous assays. Optical detection appears as the most developed technique. Colorimetry represents the simplest sensing mode that occupies a very important position among aptamer-based assays, involving gold nanoparticle aggregation (with unmodified or aptamer-modified gold NPs), the formation of HRP-mimicking DNAzyme with hemin, dye displacement or interactions with a cationic polymer. Fluorescence that is highly sensitive offers the most developed detection mode. Aptamers can be labeled or not, to give rise to turn-on or usually less sensitive turn-off fluorescent assays. Newly reported and thus less developed non-conventional magnetic resonance imaging (MRI) and electrochemistry also recently appeared in the literature, thrombin still remains the main detected target. Homogeneous assays based on aptazyme, an aptamer sequence connected to a known ribozyme motif, are also described in this review, involving optical detection, by colorimetry or fluorescence.

Robust, high-throughput solution for blood group genotyping.

With the concomitant increase of blood transfusions and safety rules, there is a growing need to integrate high-throughput and multiparametric assays within blood qualification centers. Using a robust and automated solution, we describe a new method for extended blood group genotyping (HiFi-Blood 96) bringing together the throughput possibilities of complete automation and the microarray multiplexed analysis potential. Our approach provides a useful resource for upgrading blood qualification center facilities. A set of six single-nucleotide polymorphisms (SNPs) associated with clinically important blood group antigens (Kell, Kidd, Duffy, and MNS systems) were selected and the corresponding genotyping assays developed. A panel of 293 blood samples was used to validate the approach. The resulting genotypes were compared to phenotypes previously determined by standard serologic techniques, and excellent correlations were found for five SNPs out of six. For the Kell, Kidd, Duffy, and MNS3/MNS4 systems, high matching percentages of 100%, 98.9%, 97.7%, and 97.4% were obtained, respectively, whereas a concordance percentage of 83.3% only was attained for the MNS1/MNS2 polymorphism.

1-Ethyl-3-methylimidazolium ethylsulfate/copper catalyst for the enhancement of glucose chemiluminescent detection: effects on light emission and enzyme activity.

The effect of the ionic liquid 1-ethyl-3-methylimidazolium ethylsulfate ([Emim][EtSO(4)]) on the copper-catalyzed luminol chemiluminescence (CL) is reported. A drastic light emission enhancement is observed, related to a strong interaction between Cu(2+) and the imidazolium ring. In these conditions, the CL reaction was able to produce light efficiently at pH as low as 6.5 (amplification factor: Intensity(+IL)/Intensity(-IL) = 2900). Interesting effects of [Emim][EtSO(4)] on the enzyme glucose oxidase activity were also evidenced, and advantages were taken from this enhancement to perform sensitive chemiluminescent glucose detection (LOD = 4 microM) at pH 8.0.

Chelating Langmuir-Blodgett film: a new versatile chemiluminescent sensing layer for biosensor applications.

The present study reports the achievement of a new chemiluminescent sensing layer able to simultaneously (i) play an active role on ligand immobilization and (ii) serve as a catalyst in detection processes for label-free biosensor applications. This new type of active Langmuir-Blodgett (LB) monolayer has been designed by using a chelating lipid (Ni-NTA-DOGS). Thanks to the chelated metallic cation, this peculiar lipid exhibits luminol chemiluminescence catalysis properties in the presence of hydrogen peroxide. Upon biomolecule interaction through imidazole ring chelation (mediated by the metallic cation bound to the lipid headgroup), the chemiluminescent signal can be modulated. The first chemiluminescent signal acquisition experiments have shown a strong and homogeneous signal of the chelating layer. Upon histamine interactions, a histidine derivative used as a marker of fresh food quality, we succeeded in obtaining as a proof of concept a chemiluminescent signal variation without any derivatization of the target molecule. This signal variation was shown to be directly correlated to the histamine concentration with a limit of detection of 2 microg/mL.

Automated oligonucleotide solid-phase synthesis on nanosized silica particles using nano-on-micro assembled particle supports.

This article describes an original strategy to enable solid-phase oligodeoxyribonucleotide (ODN) synthesis on nanosized silica particles. It consists of the reversible immobilization of silica nanoparticles (NPs) on micrometric silica beads. The resulting assemblies, called nano-on-micro (NOM) systems, are well adapted to ODN synthesis in an automated instrument. First, NPs are derivatized with OH functions. For NOM assembly preparation, these functions react with the silanols of the microbeads under specific experimental conditions. Furthermore, OH groups allow ODN synthesis on the nanoparticles via phosphoramidite chemistry. The stability of the NOM assemblies during ODN solid-phase synthesis is confirmed by scanning and transmission electron microscopy (SEM and TEM, respectively), together with dynamic light scattering analyses. Then, the release of ODN-functionalized nanoparticles is performed under mild conditions (1% NH(4)OH in water, 1 h, 60 degrees C). Our technique provides silica nanoparticles well functionalized with oligonucleotides, as demonstrated by hybridization experiments conducted with the cDNA target.

"Print-n-Shrink" technology for the rapid production of microfluidic chips and protein microarrays.

An innovative method for the production of microfluidic chips integrating protein spots is described. The technology, called "Print-n-Shrink", is based on the screen-printing of a microfluidic design (using a dielectric ink) onto Polyshrink polystyrene sheets. The initial print which has a minimum size of 15 microm (height) x 230 microm (width) is thermally treated (30 seconds, 163 degrees C) to shrink and generate features of 85 microm (height) x 100 microm (width). Concomitantly, proteins such as monoclonal antibodies or cellular adhesion proteins are spotted onto the Polyshrink sheets and shrunk together with the microfluidic design, creating a complete biochip integrating both complex microfluidic designs and protein spots for bioanalytical applications.

Aryl diazonium for biomolecules immobilization onto SPRi chips.

A method for the immobilization of proteins at the surface of surface plasmon resonance imaging (SPRi) chips is presented. The technology, based on the electro-deposition of a 4-carboxymethyl aryl diazonium (CMA) monolayer is compared to a classical thioctic acid self-assembled monolayer. SPRi live recording experiments followed by the quantification of the diazonium surface coverage demonstrate the presence of a monolayer of electro-deposited molecules (11*10(12) molecules mm(-2)). This monolayer, when activated through a classical carbodiimide route, generates a surface suitable for the protein immobilization. In the present study, protein A and BSA are immobilized as specific and control spots (150 microm id), respectively. The AFM characterization of the spots deposited onto CMA or thioctic acid modified chips prove the presence of 4.7 nm protein monolayers. Finally, the SPRi detection capabilities of the two surface chemistries are compared according to specific signal, non-specific interaction and regeneration possibilities. Advantages are given to the CMA surface modification since no measurable non-specific signal is obtained while reaching a higher specific signal.

New electrochemiluminescent biosensors combining polyluminol and an enzymatic matrix.

Performant reagentless electrochemiluminescent (ECL) (bio)sensors have been developed using polymeric luminol as the luminophore. The polyluminol film is obtained by cyclic voltammetry (CV) on a screen-printed electrode either in a commonly used H(2)SO(4) medium or under more original near-neutral buffered conditions. ECL responses obtained after performing polymerization either at acidic pH or at pH 6 have been compared. It appears that polyluminol formed in near-neutral medium gives the best responses for hydrogen peroxide detection. Polymerization at pH 6 by cyclic voltammetry gives a linear range extending from 8 x 10(-8) to 1.3 x 10(-4) M H(2)O(2) concentrations. Based on this performant sensor for hydrogen peroxide detection, an enzymatic biosensor has been developed by associating the polyluminol film with an H(2)O(2)-producing oxidase. Here, choline oxidase (ChOD) has been chosen as a model enzyme. To develop the biosensor, luminol has been polymerized at pH 6 by CV, and then an enzyme-entrapping matrix has been formed on the above modified working electrode. Different biological (chitosan, agarose, and alginate) and chemical (silica gels, photopolymers, or reticulated matrices) gels have been tested. Best performances have been obtained by associating a ChOD-immobilizing photopolymer with the polyluminol film. In this case, choline can be detected with a linear range extending from 8 x 10(-8) to 1.3 x 10(-4) M.

SPRi-based hemagglutinin quantitative assay for influenza vaccine production monitoring.

Influenza vaccine manufacturers lack tools, whatever the involved production bioprocess (egg or cell-based), to precisely and accurately evaluate vaccine antigen content from samples. Indeed, the gold standard single-radial immunodiffusion (SRID) assay, which remains the only validated assay for the evaluation of influenza vaccine potency, is criticized by the scientific community and regulatory agencies since a decade for its high variability, lack of flexibility and low sensitivity. We hereby report an imaging surface plasmon resonance (SPRi) assay for the quantification of both inactivated vaccine influenza antigens and viral particles derived from egg- and cell-based production samples, respectively. The assay, based on fetuin-hemagglutinin interactions, presents higher reproducibility (<3%) and a greater analytical range (0.03-20 µg/mL) than SRID for bulk monovalent and trivalent vaccine and its limit of detection was evaluated to be 100 times lower than the SRID's one. Finally, viral particles production through cell culture-based bioprocess was also successfully monitored using our SPRi-based assay and a clear correlation was found between the biosensor response and total virus particle content.

Biochips: non-conventional strategies for biosensing elements immobilization.

The present article draws a general picture of non-conventional methods for biomolecules immobilization. The technologies presented are based either on original solid supports or on innovative immobilization processes. Polydimethylsiloxane elastomer will be presented as a popular immobilization support within the biochip developer community. Electro-addressing of biomolecules at the surface of conducting biochips will appear to be an interesting alternative to immobilization processes based on surface functionalization. Finally, bead-assisted biomolecules immobilization will be presented as an open field of research for biochip developments.

Microfluidic biochip for chemiluminescent detection of allergen-specific antibodies.

Protein microarrays for allergen-specific antibodies detection were integrated in microfluidic chips, with imaging chemiluminescence as the analytical technique. This paper demonstrates the feasibility of miniaturized chemiluminescent ELISA by presenting rapid, reproducible and sensitive detection of protein antibodies using microfluidics. Three different proteins, beta-lactoglobulin, peanut lectin and human IgG were immobilized via a "macromolecules to polydimethylsiloxane elastomer (PDMS) transfer" protocol and used as capturing agent for the detection of specific antibodies. A convenient and reversible procedure was used to bond the PDMS microarray substrate to complimentary SU-8/glass microfluidic reaction chambers. The hydrodynamic behaviours of the three proteins interactions within the micro-chambers were investigated to select the most efficient flowing parameters (come to terms with the assay time and performances). The use of optimized conditions led to the concomitant detection of three specific antibodies at pM level in 300 microL and using 6 min sample incubation time. Finally, sera from allergic patients were assayed using the microfluidic device modified with apple hazelnut and pollen allergen. The results obtained compared favourably with those obtained with the classical Pharmacia CAP system.