Biogas purification with biomass ash.

The aim of the study was to investigate the option to purify biogas from small-scale biogas plants by entrapping CO2 and H2S with regionally available biomass ash. Connected to the existing biogas plant Neustift (Tyrol) wood ash placed in a 1 m3 container was used as a trap for CO2 and H2S in the biogas. With the process conditions chosen, for a period of a few hours CO2 was trapped resulting in pure methane. The removal of H2S was much longer-lasting (up to 34 d). The cumulative H2S uptake by the biomass ash ranged from 0.56 to 1.25 kg H2S per ton of ash. The pH of the ash and the leachability of Lead and Barium were reduced by the flushing with biogas, however toxicity towards plants was increased thus reducing the potential of ash use in agriculture. It can be concluded that biomass ash may be used for removal of hydrogen sulphide from biogas in small and medium biogas plants. The economic evaluation, however, indicated that the application of this system is limited by transport distances for the ash and its potential use afterwards.

Influence of mechanical-biological waste pre-treatment methods on the gas formation in landfills.

In order to minimise emissions and environmental impacts, only pre-treated waste should be disposed of. For the last six years, a series of continuous experiments has been conducted at the Institute WAR, TU Darmstadt, in order to determine the emissions from pre-treated waste. Different kinds of pre-treated waste were incubated in several reactors and various data, including production and composition of the gas and the leachate, were collected. In this paper, the interim results of gas production and the gas composition from different types of waste after a running time of six years are presented and discussed.

Measurement of odour with focus on sampling techniques.

The treatment of waste and many manufacturing processes cause odour emissions. In order to prevent odours, the residents and businesses in the neighbourhood of such plants complain about odour, and it becomes necessary to reduce the emissions. To achieve that, the emissions have to be investigated and evaluated in a representative and reproducible manner. The DIN EN 13725 (2003) [DIN EN 13725. 2003. Luftbeschaffenheit--Bestimmung der Geruchsstoffkonzentration mit dynamischer Olfaktometrie--Air quality--Determination of odour concentration by dynamic olfactometry, Deutsche Fassung EN 13725:2003. Beuth Verlag, Berlin (DE)] provides a European standard for the measurement of odour. Nevertheless, the subject of sampling is not standardised; even though it has a substantial influence on the results of the measurements. In this paper, the odour measurement itself, as well as the different kinds of sampling methods (depending on the specific type of source), will be presented and discussed.

Increase of the purification efficiency of biofilters by the use of a complementary ionisation step.

The biofilter and the ionisation system are two oxidative treatment techniques for purification of waste gas streams with low concentrations of volatile organic compounds. In this paper, the authors present the investigations of an ionisation technique aimed at increasing the efficiency of the reduction of the odorant concentration in waste gas streams from biological waste treatment plants. The objective is to enable advanced odour emission reduction and to adjust the existing biofilters to stricter requirements. In a first step, the odorous substances which are major contributors to the overall odorant concentration are identified on basis of various emission data sets with the help of a method of life cycle impact assessment. Thereby limonene, alpha-pinene, ethyl butyrate and dimethyl disulphide were identified as crucial indicators. In a second step, experimental investigations using limonene as a model compound were conducted to gain an understanding of the ionisation process itself and at last for the evaluation of the system.

Ecological assessment of waste air treatment systems in the case of biological waste treatment.

In this paper, the authors present a technique aimed at increasing the efficiency of biological waste air treatment. The objective is to modify the existing biological waste air treatment systems (i.e. biofilters) to reduce the emitted substances and their potential environmental impacts. The principle of the ionization system is described, along with the first experiences of applying those methods during the rotting process. The investigated system is evaluated by means of life cycle impact assessment, with a focus on odour. It is demonstrated which of the measured substances (i.e. VOC) can potentially contribute to the odorant concentration. Further, it is shown which odour-intensive substances can be reduced by deploying ionization. Finally, the authors respond to the fact that the cleaning efficiency of ionization strongly depends on the humidity of the treated waste gas stream.