In Vitro Evaluation of a Foamable Microemulsion Towards an Improved Topical Delivery of Diclofenac Sodium.

Topical microemulsion (ME) might provide a novel and advanced transdermal delivery system due to the enhances of drug solubility and permeability across the stratum corneum. Foams are topical delivery systems that have excellent patient compliance, acceptability, and preference. Therefore, this study aimed to investigate a foamable microemulsion as an alternative topical and transdermal dosage form for diclofenac sodium (DS). The physicochemical properties (optical clarity, percentage transmittance, homogeneity, consistency of formulation, particle size, zeta potential, conductivity, viscosity, and morphology, etc.) of the DS-loaded ME were investigated. The foam stability of both drug-free ME and DS-loaded ME was measured. The foam quality was evaluated, and the chemical stability over 90 days was determined. Franz diffusion cells were employed to assess the in vitro drug release of a foamed DS-loaded ME and compared with a commercial topical product. A foamable and stable DS-loaded ME that maintained small particle sizes and constant zeta potential and was transparent and translucent in appearance after 90 days was successfully produced. The foam of the DS-loaded ME was physically more stable compared to the drug-free foam. The foam had an increased drug release rate compared to the commercial product. The foamable DS-loaded ME has a great potential to enhance the transdermal delivery of DS after topical administration. Foamed DS-loaded ME is a promising alternative to the current topical formulation of DS.

Traditional Chinese Medicine "Pill", an Ancient Dosage Form with Surprising Modern Pharmaceutical Characteristics.

Currently, the use of Traditional Chinese Medicine (TCM) for healthy living in daily practice is widely accepted across the world. However, not much attention has been paid to the particular characteristics of TCM "pills", one of the classic dosage forms in TCM. For a better understanding, this review was undertaken to provide a modern pharmaceutical overview of pills. Over many centuries, pills have been developed in different types (honeyed pill, water-honeyed pill, watered pill, pasted pill, waxed pill, concentrated pill, and dripping pill) to achieve varying intended TCM release patterns. It suggests that knowledge relating to the impact of binders and excipients on drug release from TCM pills can be traced back to before dissolution testing was invented. Therefore, although Pills may be considered as an ancient and outdated dosage form compared to current drug delivery systems, they have surprisingly modern pharmaceutical properties that is highlighted in this article. In addition, this review found that the quality control standards for TCM pill are globally substantially different. Hence, greater effort should be taken to establish an internationally harmonized and proper standard to safeguard the quality of this dosage form and to ensure the alignment with TCM use.

The Lymphatic System: A Sometimes-Forgotten Compartment in Pharmaceutical Sciences.

The uniqueness of structure and physiology of the lymphatic system make it challenging to delineate all its contributions in the maintenance of our health. However, in the past two decades, the understanding of the importance of the function of this system has evolved and more appreciation has been drawn to the distinctive role it plays in health and disease. The lymphatic system has been linked to the pathophysiology of numerous ailments including cancer, various metabolic diseases, inflammatory conditions, and infections. Moreover, it has also been revealed that lymphatic targeted formulations can enhance the delivery of drugs through the lymphatic system to the bloodstream, bypassing the hepatic first-pass metabolism if taken orally, thus increasing the bioavailability, and improving the pharmacokinetic and toxicological profiles in general. Engineering lymphotropic preparations requires the understanding of many factors, the most important one being that of the physiological environment which they will encounter. Therefore, in this review, we detail the basic structure of the lymphatic system, then highlight the therapeutic and the pharmacokinetic benefits of drug delivery into the lymphatic system. The criteria for drugs and formulations used for lymphotropic delivery are also detailed with a contemporary overview of various studies undertaken in this field.

Exploratory Study on Lercanidipine Hydrochloride Polymorphism: pH-Dependent Solubility Behavior and Simulation of its Impact on Pharmacokinetics.

This work describes an exploratory experimental and in silico study of the influence of polymorphism, particle size, and physiology on the pharmacokinetics of lercanidipine hydrochloride (LHC). Equilibrium and kinetic solubility studies were performed on LHC forms I and II, as a function of pH and buffer composition. GastroPlus® was used to evaluate the potential effect of solubility differences due to polymorphism, particle size, and physiological conditions, on the drug pharmacokinetics. The results indicated that solubilities of LHC polymorphs are strongly dependent on the composition and pH of the buffer media. The concentration ratio (CI/CII) is particularly large for chloride buffer (CI/CII = 3.3-3.9) and exhibits a slightly decreasing tendency with the pH increase for all other buffers. Based on solubility alone, a higher bioavailability of form I might be expected. However, exploratory PBPK simulations suggested that (i) under usual fasted (pH 1.3) and fed (pH 4.9) gastric conditions, the two polymorphs have similar bioavailability, regardless of the particle size; (ii) at high gastric pH in the fasted state (e.g., pH 3.0), the bioavailability of form II can be considerably lower than that of form I, unless the particle size is < 20 µm. This study demonstrates the importance of investigating the effect of the buffer nature when evaluating the solubility of ionizable polymorphic substances. It also showcases the benefits of using PBPK simulations, to assess the risk and pharmacokinetic relevance of different solubility and particle size between crystal forms, for diverse physiological conditions.

Raman Spectroscopy for Quantitative Analysis in the Pharmaceutical Industry.

Raman spectroscopy is a very promising technique increasingly used in the pharmaceutical industry. Due to its development and improved instrumental versatility achieved over recent decades and through the application of chemometric methods, this technique has become highly precise and sensitive for the quantification of drug substances. Thus, it has become fundamental in identifying critical variables and their clinical relevance in the development of new drugs. In process monitoring, it has been used to highlight in-line real-time analysis, and it has been used more commonly since 2004 when the Food and Drug Administration (FDA) launched Process Analytical Technology (PAT), integrated with the concepts of Pharmaceutical Current Good Manufacturing Practices (CGMPs) for the 21st Century. The present review presents advances in the application of this tool in the development of pharmaceutical products and processes in the last six years.

Inflammation Caused by Nanosized Delivery Systems: Is There a Benefit?

Secondary macrophage cytotoxicity induced by nanoparticles was described before. The study aim was to investigate the role of secondary cytotoxic effect in a macrophage-lung cancer coculture model after nanoparticle treatment in the presence and absence of anti-inflammatory drugs. An in vitro coculture model composed of confluent alveolar macrophage MH-S and A-549 lung cancer cells separated by a 0.4 µm porous membrane was used in the study. Macrophages were treated with two sizes of gelatin nanoparticles and two sizes of poly(isobutyl cyanoacrylate) (PIBCA) nanoparticles, with and without doxorubicin as a chemotherapeutic drug. The treatment effect with and without the presence of anti-inflammatory drug was studied using an MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay. The model drugs were ibuprofen, celecoxib, prednisolone, dexamethasone, and methotrexate. Different nanoparticles in different sizes were synthesized with a range of physicochemical characteristics. Doxorubicin loaded nanoparticles were prepared with an entrapment efficiency of 82-83% for PIBCA and 39-42% for gelatin. Nanoparticle treatment of macrophages showed a secondary cytotoxic effect on A-549 cancer cells at 24 and 36 h, with a drop in cell viability of 40-62%. However, this effect was significantly reduced to 10-48% if the macrophages were exposed to anti-inflammatory drugs. When ibuprofen and celecoxib were used the cell viability rebounded between 24 and 36 h. For prednisolone, dexamethasone, and methotrexate the cell viability dropped further between 24 and 36 h. Macrophages exposed to nanoparticles show secondary cytotoxicity, which has a significant antitumor effect in the microclimate of the coculture model. The beneficial nanoparticle treatment effect was significantly reduced if nonsteroidal anti-inflammatory drugs (NSAIDs), glucocorticoids, or methotrexate was given at the same time. The data suggest that anti-inflammatory treatments can decrease the carrier-induced macrophage cytotoxicity and its antitumor effectiveness with chemotherapy.

Physical-chemical properties of furosemide nanocrystals developed using rotation revolution mixer.

Recently, several approaches have been reported to improve the dissolution rate and bioavailability of furosemide, a class IV drug. However, to the best of our knowledge, none of them proposed nanocrystals. In the last decade, nanocrystals successfully addressed solubility issues by increasing surface area and saturation solubility, both leading to an increase in the dissolution rate of poor water soluble drugs. The preparation of furosemide nanocrystals was by a rotation revolution mixer method. Size distribution and morphology were performed using laser diffraction and scanning electron microscopy, respectively. In addition, differential scanning calorimetry, thermogravimetry, X-ray powder diffraction (XRD) and low frequency shift-Raman spectroscopy allowed investigating the thermal properties and crystalline state. Solubility saturation and intrinsic dissolution rate (IDR) studies were conducted. The thermal analysis revealed lower melting range for the nanocrystals comparing to furosemide. Moreover, a slight crystalline structure change to the amorphous state was observed by XRD and confirmed by low frequency shift Raman. The particle size was reduced to 231 nm with a polydispersity index of 0.232, a 30-fold reduction from the original powder. Finally, the saturation solubility and IDR showed a significant increase. Furosemide nanocrystals showed potential for development of innovative formulations as an alternative to the commercial products.

Design Space Approach for Preservative System Optimization of an Anti-Aging Eye Fluid Emulsion.

The use of preservatives must be optimized in order to ensure the efficacy of an antimicrobial system as well as the product safety. Despite the wide variety of preservatives, the synergistic or antagonistic effects of their combinations are not well established and it is still an issue in the development of pharmaceutical and cosmetic products. The purpose of this paper was to establish a space design using a simplex-centroid approach to achieve the lowest effective concentration of 3 preservatives (methylparaben, propylparaben, and imidazolidinyl urea) and EDTA for an emulsion cosmetic product. Twenty-two formulae of emulsion differing only by imidazolidinyl urea (A: 0.00 to 0.30% w/w), methylparaben (B: 0.00 to 0.20% w/w), propylparaben (C: 0.00 to 0.10% w/w) and EDTA (D: 0.00 to 0.10% w/w) concentrations were prepared. They were tested alone and in binary, ternary and quaternary combinations. Aliquots of these formulae were inoculated with several microorganisms. An electrochemical method was used to determine microbial burden immediately after inoculation and after 2, 4, 8, 12, 24, 48, and 168 h. An optimization strategy was used to obtain the concentrations of preservatives and EDTA resulting in a most effective preservative system of all microorganisms simultaneously. The use of preservatives and EDTA in combination has the advantage of exhibiting a potential synergistic effect against a wider spectrum of microorganisms. Based on graphic and optimization strategies, we proposed a new formula containing a quaternary combination (A: 55%; B: 30%; C: 5% and D: 10% w/w), which complies with the specification of a conventional challenge test. A design space approach was successfully employed in the optimization of concentrations of preservatives and EDTA in an emulsion cosmetic product.

Preparation and characterization of a microencapsulated polyethylene glycol cross-linked polyhemoglobin.

Many complications are associated to the therapeutic use of blood, among which are not only transfusion adverse events but also other issues such as lack of donors and high costs for collecting, testing, preserving, and distributing blood packages. Therefore, a clinically viable "blood substitute" is considered the holy grail of traumatology and may greatly benefit medicine. One of the most successful approaches to date is conjugating hemoglobin with polyethylene glycol (PEG). This conjugation aims mainly at overcoming free cell hemoglobin toxicity, which makes its use as oxygen carrier in pure form unfeasible. To improve PEG-hemoglobin conjugates feasibility, we propose applying dual functional PEG cross-linking hemoglobin molecules encapsulated by a protein carrier. The new oxygen carrier showed mean values of the hydrodynamic diameter, dispersity, and zeta potential of 1370 nm, 0.029 and -36 mV, respectively, evidencing the successful synthesis of PEG bis(N-succinimidyl succinate) and polyhemoglobin as well as the structuring of protein carrier.

The critical role of NIR spectroscopy and statistical process control (SPC) strategy towards captopril tablets (25 mg) manufacturing process understanding: a case study.

In this work, near-infrared spectroscopy (NIRS) method was used to evaluate the uniformity of dosage units of three captopril 25 mg tablets commercial batches. The performance of the calibration method was assessed by determination of Q value (0.9986), standard error of estimation (C-set SEE = 1.956), standard error of prediction (V-set SEP = 2.076) as well as the consistency (106.1%). These results indicated the adequacy of the selected model. The method validation revealed the agreement of the reference high pressure liquid chromatography (HPLC) and NIRS methods. The process evaluation using the NIRS method showed that the variability was due to common causes and delivered predictable results consistently. Cp and Cpk values were, respectively, 2.05 and 1.80. These results revealed a non-centered process in relation to the average target (100% w/w), in the specified range (85-115%). The probability of failure was 21:100 million tablets of captopril. The NIRS in combination with the method of multivariate calibration, partial least squares (PLS) regression, allowed the development of methodology for the uniformity of dosage units evaluation of captopril tablets 25 mg. The statistical process control strategy associated with NIRS method as PAT played a critical role in understanding of the sources and degree of variation and its impact on the process. This approach led towards a better process understanding and provided the sound scientific basis for its continuous improvement.

Challenges and opportunities to use biowaivers to compare generics in China.

Biowaivers for class I drugs according to the biopharmaceutics classification system (BCS) were first introduced in 2000. The in vitro equivalence can be used to document bioequivalence between products. This study compared the in vitro dissolution behavior of two BCS class I drugs, amoxicillin and metronidazole, which are sold in China. Identifying a reference product on the Chinese domestic market was impossible. Three 250-mg and two 500-mg amoxicillin capsules and four metronidazole tablet products were tested. None of the amoxicillin products and three of the four metronidazole tablets were found to be equivalent to each other when the same strengths were compared. The bioequivalence of products that fail the in vitro test can be established via in vivo clinical studies which are expensive and time consuming. Establishing nationally or globally accepted reference products may provide regulatory agencies with an efficient mechanism approving high quality generics.

Hydroxymethylnitrofurazone lymphatic uptake with nanostructured lipid carrier after oral administration in rats.

Background: Leishmaniasis, caused by the protozoan Leishmania sp., infects phagocyte cells present in lymphatic organs. This study demonstrates the influence of nanostructured lipid carrier-loaded hydroxymethylnitrofurazone (NLC-NFOH) on lymphatic uptake using a chylomicron-blocking flow model in rats. Method: Lymphatic uptake of NFOH was assessed 1 h after oral administration of dimethyl sulfoxide with NFOH or NLC-NFOH with and without cycloheximide pretreatment. Result: Dimethyl sulfoxide with NFOH and NLC-NFOH showed NFOH serum concentrations of 0.0316 and 0.0291 µg/ml, respectively. After chylomicron blocking, NFOH was not detected. Conclusion: Despite log P below 5, NFOH was successfully taken up by the lymphatic system. Long-chain fatty acids and particle size might be main factors in these findings. NLC-NFOH is a promising and convenient platform for treating leishmaniasis via oral administration.

In Vitro Predictive Model for Intestinal Lymphatic Uptake: Exploration of Additional Enhancers and Inhibitors.

Drug absorption via chylomicrons holds significant implications for both pharmacokinetics and pharmacodynamics. However, a mechanistic understanding of predicting in vivo intestinal lymphatic uptake remains largely unexplored. This study aimed to delve into the intestinal lymphatic uptake of drugs, investigating both enhancement and inhibition using various excipients through our previously established in vitro model. It also examined the applicability of the model by assessing the lymphatic uptake enhancement of a lymphotropic formulation with linoleoyl polyoxyl-6 glycerides using the same model. The model successfully differentiated among olive, sesame, and peanut oils in terms of lymphatic uptake. However, it did not distinguish between oils containing long-chain fatty acids and coconut oil. Coconut oil, known for its abundance of medium-chain fatty acids, outperformed other oils. This heightened uptake was attributed to the superior emulsification of this oil in artificial chylomicron media due to its high content of medium-chain fatty acids. Additionally, the enhanced uptake of the tested formulation with linoleoyl polyoxyl-6 glycerides underscored the practical applicability of this model in formulation optimization. Moreover, data suggested that increasing the zeta potential of Intralipid® using sodium lauryl sulfate (SLS) and decreasing it using (+/-) chloroquine led to enhanced and reduced uptake in the in vitro model, respectively. These findings indicate the potential influence of the zeta potential on intestinal lymphatic uptake in this model, though further research is needed to explore the possible translation of this mechanism in vivo.

Biphasic dissolution combined with modified cylinder method-A new promising method for dissolution test in drug-loaded nanoemulsions.

Dissolution testing is important in assessing the in vitro drug release performance for oral administration dosage forms. However, currently, a simple and efficient in vitro test to investigate critical factors that may impact the drug release and bioavailability at the development stage of a drug-loaded nanoemulsion (NE) is lacking. Thus, in this study, we developed a new combined biphasic and modified cylinder (BP + MC) method to evaluate the dissolution profile of NEs. Flubendazole (FLZ), a Biopharmaceutical Classification System (BCS) Class II drug, offers a new prospective for drug repositioning for treating lung cancer and cryptococcal meningitis. We compared the drug release profiles of three different FLZ formulations (micronized as a suspension, loaded in NE, and solubilized in oil) by using three different methods (dialysis bag, modified cylinder method, and a new BP + MC method). The results showed potential higher drug release of FLZ from the suspension compared to FLZ-loaded NE at pH 1.2, and higher drug release from FLZ-loaded NE compared to other forms in octanol phase. These results correlate well with the in vivo test performed in mice carried out in our previous works. Furthermore, the partition mechanism of the drug released from the NE is discussed in-depth in this article, as well as the advantage of drug-loaded NEs over other preparations in creating supersaturable conditions. Based on the results, we provide new insights into how dissolution methods for a poorly water-solubility drug can be designed. Therefore, we present this new combined BP + MC method as a potential new discriminative dissolution test for future studies when developing drug-loaded NE and comparing with other dosage forms.

Optimizing adjuvant inhaled chemotherapy: Synergistic enhancement in paclitaxel cytotoxicity by flubendazole nanocrystals in a cycle model approach.

Lung cancer is the leading cause of cancer-related death. In addition to new innovative approaches, practical strategies that improve the efficacy of already available drugs are urgently needed. In this study, an inhalable dry powder formulation is used to repurpose flubendazole, a poorly soluble anthelmintic drug with potential against a variety of cancer lineages. Flubendazole nanocrystals were obtained through nanoprecipitation, and dry powder was produced by spray drying. Through fractional factorial design, the spray drying parameters were optimized and the impact of formulation on aerolization properties was clarified. The loading limitations were clarified through response surface methodology, and a 15% flubendazole loading was feasible through the addition of 20% L-leucine, leading to a flubendazole particle size of 388.6 nm, median mass aerodynamic diameter of 2.9 µm, 50.3% FPF, emitted dose of 83.2% and triple the initial solubility. Although the cytotoxicity of this formulation in A549 cells was limited, the formulation showed a synergistic effect when associated with paclitaxel, leading to a surprising 1000-fold reduction in the IC50. Compared to 3 cycles of paclitaxel alone, a 3-cycle model combined treatment increased the threshold of cytotoxicity by 25% for the same dose. Our study suggests, for the first time, that orally inhaled flubendazole nanocrystals show high potential as adjuvants to increase cytotoxic agents' potency and reduce adverse effects.

Highly water-soluble dapsone nanocrystals: Towards innovative preparations for an undermined drug.

Dapsone (DAP)is a dual-function drug substance; however, its limited water solubility may impair its bioavailability. Drug nanocrystals are an alternative to overcome this limitation. Herein, a DAP nanosuspension was prepared using adesign space approach aiming to investigate the influence of raw material properties and process parameters on the critical quality attributes of the drugnanocrystals. Optimized nanocrystals with 206.3 ± 6.7 nm using povacoat™ as stabilizer were made. The nanoparticles were characterized by dynamic light scattering, laser diffraction, scanning electron microscopy, differential scanning calorimetry, X-ray powder diffraction, and saturation solubility. Compared to the raw material, the nanocrystals were 250-times smaller. Meanwhile, its crystalline state remained basically unchanged even after milling and drying. The nanosuspension successfully maintained its physical stability inlong-termandaccelerated stability studiesover, 4 and 3 months. Furthermore, toxicity studiesshowed low a toxicity at a20 mg/kg. As expected for nanocrystals, the size reduction improvedsaturation solubility3.78 times in water. An attempt to scale up from lab to pilot scale resulted nanocrystals of potential commercial quality. In conclusion, the present study describes the development of dapsone nanocrystals for treating infectious and inflammatory diseases. The nanocrystal formuation can be scaled up for commercial use.

Development of a Novel In Vitro Model to Study Lymphatic Uptake of Drugs via Artificial Chylomicrons.

The lymphatic system plays a crucial role in the absorption of lipophilic drugs, making it an important route for drug delivery. In this study, an in vitro model using Intralipid® was developed to investigate the lymphatic uptake of drugs. The model was validated using cannabidiol, halofantrine, quercetin, and rifampicin. Remarkably, the uptake of these drugs closely mirrored what would transpire in vivo. Furthermore, adding peanut oil to the model system significantly increased the lymphatic uptake of rifampicin, consistent with meals containing fat stimulating lymphatic drug uptake. Conversely, the inclusion of pluronic L-81 was observed to inhibit the lymphatic uptake of rifampicin in the model. This in vitro model emerges as a valuable tool for investigating and predicting drug uptake via the lymphatic system. It marks the first phase in developing a physiologically based predictive tool that can be refined further to enhance the precision of drug interaction predictions with chylomicrons and their subsequent transport via the lymphatic system. Moreover, it can be employed to explore innovative drug formulations and excipients that either enhance or hinder lymphatic drug uptake. The insights gained from this study have significant implications for advancing drug delivery through the lymphatic system.

Provisional biopharmaceutical classification of some common herbs used in Western medicine.

The aim of this study was to classify some markers of common herbs used in Western medicine according to the Biopharmaceutical Classification System (BCS). The BCS is a scientific approach to classify drug substances based upon their intestinal permeability and their solubility, at the highest single dose used, within the physiologically relevant pH ranges. Known marker components of twelve herbs were chosen from the USP Dietary Supplement Compendium Monographs. Different BCS parameters such as intestinal permeability (P(eff)) and solubility (C(s)) were predicted using the ADMET Predictor, which is a software program to estimate biopharmaceutical relevant molecular descriptors. The dose number (D0) was calculated when information from the literature was available to identify an upper dose for individual markers. In these cases the herbs were classified according to the traditional BCS parameters using P(eff) and D0. When no upper dose could be determined, then the amount of a marker that is just soluble in 250 mL of water was calculated. This value, M(x), defines when a marker is changing from highly soluble to poorly soluble according to BCS criteria. This biopharmaceutically relevant value can be a useful tool for marker selection. The present study showed that a provisional BCS classification of herbs is possible but some special considerations need to be included into the classification strategy. The BCS classification can be used to choose appropriate quality control tests for products containing these markers. A provisional BCS classification of twelve common herbs and their 35 marker compounds is presented.

Antibiotic-loaded lipid-based nanocarrier: A promising strategy to overcome bacterial infection.

According to the World Health Organization (WHO) and Centers for Disease Control and Prevention (CDC), bacterial infections are one of the greatest threats to global health, food production, and life expectancy. In this sense, the development of innovative formulations aiming at greater therapeutic efficacy, safety, and shorter treatment duration compared to conventional products is urgently needed. Lipid-based nanocarriers (LBNs) have demonstrated the potential to enhance the effectiveness of available antibiotics. Among them, liposome, nanoemulsion, solid lipid nanoparticle (SLN), and nanostructured lipid carrier (NLC) are the most promising due to their solid technical background for laboratory and industrial production. This review describes recent advances in developing antibiotic-loaded LBNs against susceptible and resistant bacterial strains and biofilm. LBNs revealed to be a promising alternative to deliver antibiotics due to their superior characteristics compared to conventional preparations, including their modified drug release, improved bioavailability, drug protection against chemical or enzymatic degradation, greater drug loading capacity, and biocompatibility. Antibiotic-loaded LBNs can improve current clinical drug therapy, bring innovative products and rescue discarded antibiotics. Thus, antibiotic-loaded LBNs have potential to open a window of opportunities to continue saving millions of lives and prevent the devastating impact of bacterial infection.

Oral administration of buparvaquone nanostructured lipid carrier enables in vivo activity against Leishmania infantum.

Leishmaniasis, a neglected tropical disease, is prevalent in 98 countries with the occurrence of 1.3 million new cases annually. The conventional therapy for visceral leishmaniasis requires hospitalization due to the severe adverse effects of the drugs, which are administered parenterally. Buparvaquone (BPQ) showed in vitro activity against leishmania parasites; nevertheless, it has failed in vivo tests due to its low aqueous solubility. Though, lipid nanoparticles can overcome this holdback. In this study we tested the hypothesis whether BPQ-NLC shows in vivo activity against L. infantum. Two optimized formulations were prepared (V1: 173.9 ± 1.6 nm, 0.5 mg of BPQ/mL; V2: 232.4 ± 1.6 nm, 1.3 mg of BPQ/mL), both showed increased solubility up to 73.00-fold, and dissolution up to 83.29%, while for the free drug it was only 2.89%. Cytotoxicity test showed their biocompatibility (CC50 >554.4 µM). Besides, the V1 dose of 0.3 mg/kg/day for 10 days reduced the parasite burden in 83.4% ±18.2% (p <0.05) in the liver. BPQ-NLC showed similar leishmanicidal activity compared to miltefosine. Therefore, BPQ-NLC is a promising addition to the limited therapeutic arsenal suitable for leishmaniasis oral administration treatment.