Targeting prostate cancer with docetaxel-loaded peptide 563-conjugated PEtOx-co-PEI30%-b-PCL polymeric micelle nanocarriers.

Prostate cancer is a global disease that negatively affects the quality of life. Although various strategies against prostate cancer have been developed, only a few achieved tumor-specific targeting. Therefore, a special emphasis has been placed on the treatment of cancer using nano-carrier-encapsulated chemotherapeutic agents conjugated with tumor-homing peptides. The targeting strategy coupling the drugs with nanotechnology helps to overcome the most common barriers, such as high toxicity and side effects. Prostate-specific membrane antigen has emerged as a promising target molecule for prostate cancer and shown to be targeted with high affinity by GRFLTGGTGRLLRIS peptide known as peptide 563 (P563). Here, we aimed to assess the in vitro and in vivo targeting efficiency, safety, and efficacy of P563-conjugated, docetaxel (DTX)-loaded polymeric micelle nanoparticles (P563-PEtOx-co-PEI30%-b-PCL-DTX) against prostate cancer. To this end, we analyzed the cytotoxic activity of P563-PEtOx-co-PEI30%-b-PCL and P563-PEtOx-co-PEI30%-b-PCL-DTX by a cell proliferation assay using PNT1A and 22Rv1 cells. We have also determined the targeting selectivity of P563-PEtOx-co-PEI30%-b-PCL-FITC by flow cytometry and assessed the induction of cell death by western blot and TUNEL assays for P563-PEtOx-co-PEI30%-b-PCL-DTX in 22Rv1 cells. To investigate the in vivo efficacy, we administered DTX in the free form or in polymeric micelle nanoparticles to athymic CD-1 nu/nu mice 22Rv1 xenograft models and performed histopathological analyses. Our study showed that targeting prostate cancer with P563-conjugated PEtOx-co-PEI30%-b-PCL polymeric micelles could exert a potent anti-cancer activity with low side effects.

Delivery of doxorubicin loaded P18 conjugated-poly(2-ethyl-oxazoline)-DOPE nanoliposomes for targeted therapy of breast cancer.

Breast cancer, a heterogeneous disease, has the highest incidence rate and is a major cause of death in females worldwide. Drug delivery by using nanotechnology has shown great promise for improving cancer treatment. Nanoliposomes are known to have enhanced accumulation ability in tumors due to prolonged systemic circulation. Peptide 18 (P18), a tumor homing peptide targeting keratin-1 (KRT-1), was previously shown to have high binding affinity towards breast cancer cells. In this study, we investigate the ability of P18 conjugated PEtOx-DOPE nanoliposomes (P18-PEtOx-DOPE) for the targeted delivery of doxorubicin to AU565 breast cancer model. Toxicology studies of PEtOx-DOPE nanoliposomes performed on normal breast epithelial cells (MCF10A), showed minimal toxicity. Doxorubicin delivery by P18-PEtOx-DOPE to AU565 cells induces cytotoxicity in a dose and time dependent manner causing mitotic arrest in G2/M phase at 24 h. Anti-cancer activity of P18-PEtOx-DOPE-DOX nanoliposomes on AU565 cells was detected by Annexin V/PI apoptosis assay. In terms of in vivo antitumor efficacy, P18-PEtOx-DOPE-DOX nanoliposomes administration to AU565 CD-1 nu/nu mice model showed significant decrease in tumor volume suggesting that DOX delivered by these nanoliposomes elicited a strong antitumor response comparable to the free delivery of doxorubicin. Overall, our results offered preclinical proof for the use of P18-PEtOx-DOPE-DOX nanoliposomes in KRT-1+ breast cancer therapy.

Design and evaluation of peptide-18-targeted nanoliposomes constructed by poly(2-oxazoline)-DOPE for doxorubicin delivery.

AIMS: The aim of this study is to develop targeted nanoliposome formulations to provide efficient treatment for breast cancer. In this study, peptide 18-modified poly(2-ethyl-2-oxazoline)-dioleoylphosphatidylethanolamine (P18-PEtOx-DOPE), was synthesised to construct nanoliposomes. METHODS: Doxorubicin (DOX) was encapsulated into the nanoliposomes by ethanol injection method. Particle size and polydispersity index were measured by dynamic light scattering. Zeta potential was determined by electrophoretic laser Doppler anemometry. The shape of the nanoliposomes was examined by transmission electron microscope. Specific bindings of P18-PEtOx-DOPE nanoliposomes were demonstrated on AU565 cells by confocal microscopy and flow cytometry studies. RESULTS: DOX-loaded nanoliposomes with particle diameter of 150.00 ± 2.84 nm and PDI of 0.212 ± 0.013 were obtained. PEtOx-DOPE and PEtOx-DOPE nanoliposomes are non-toxic on HUVEC, HEK293 and hMSC cells for 48 h. Furthermore, P18-PEtOx-DOPE nanoliposomes demonstrated specificity towards AU565 cells with high binding affinity. CONCLUSIONS: As a result, DOX-loaded P18-PEtOx-DOPE nanoliposomes can serve as favourable candidates in breast cancer targeted therapy.

Exploiting ionisable nature of PEtOx-co-PEI to prepare pH sensitive, doxorubicin-loaded micelles.

AIMS: This study was conducted to evaluate block copolymers containing two different poly(ethyleneimine) (PEI) amounts, as new pH-sensitive micellar delivery systems for doxorubicin. METHODS: Micelles were prepared with block copolymers consisting of poly(2-ethyl-2-oxazoline)-co-poly(ethyleneimine) (PEtOx-co-PEI) and poly(ε-caprolactone) (PCL) as hydrophilic and hydrophobic blocks, respectively. Doxorubicin loading, micelle size, pH-dependent drug release, and in vitro cytotoxicity on MCF-7 cells were investigated. RESULTS: The average size of drug-loaded micelles was under 100 nm and drug loading was between 10.7% and 48.3% (w/w). pH-sensitive drug release was more pronounced (84.7% and 68.9% (w/w) of drug was released at pH 5.0 and pH 7.4, respectively) for the micelles of the copolymer with the lowest PEI amount. The cell viability of doxorubicin-loaded micelles which were prepared by the copolymer with the lowest PEI amount was 28-33% at 72 h. CONCLUSIONS: PEtOx-co-PEI-b-PCL micelles of this copolymer were found to be stable and effective pH-sensitive nano-sized carriers for doxorubicin delivery.

Development and characterization of cationic solid lipid nanoparticles for co-delivery of pemetrexed and miR-21 antisense oligonucleotide to glioblastoma cells.

The practical use of solid lipid nanoparticles (SLNs) in research has been highlighted in the literature, but few reports have combined SLNs with miRNA-based therapy and chemotherapy. We aimed to prepare cationic SLNs (cSLNs) to load anti-miR-21 oligonucleotide and pemetrexed for glioblastoma therapy in vitro. cSLNs were employed to encapsulate both pemetrexed and anti-miR-21 by a high-pressure homogenization method, and then the properties of cSLNs were characterized. We studied cellular uptake and cytotoxicity properties of cSLNs in U87MG cells. cSLNs were 124.9 ± 1.6 nm in size and 27.3 ± 1.6 mV in zeta potential with spherical morphology in the TEM image. cSLNs uptake by U87MG cells was increased significantly higher and more effective than free pemetrexed. These findings suggest that cSLNs represent a potential new approach for carrying both pemetrexed and anti-miR-21 for glioblastoma therapy.

Design of ciprofloxacin-loaded nano-and microcomposite particles for dry powder inhaler formulations: preparation, in vitro characterisation, and antimicrobial efficacy.

In this study, ciprofloxacin hydrochloride (CIP)-loaded poly-ε-caprolactone (PCL) nanoparticles were prepared for pulmonary administration. CIP-loaded PCL nanoparticles were prepared using solid-in-oil-in-water (s/o/w) emulsion solvent evaporation method, and the effects of various formulation parameters on the physicochemical properties of the nanoparticles were investigated. PCL nanoparticles showed spherical shapes with particle sizes around 143-489 nm. Encapsulation efficiency was found to be very low because of water-solubility properties of CIP. However, the surface modification of nanoparticles with chitosan caused an increase in the encapsulation efficiency of nanoparticles. At drug release study, CIP-loaded PCL nanoparticles showed initial burst effect for 4 h and then continuously released for 72 h. Nanocomposite microparticles containing CIP-loaded PCL nanoparticles were prepared freeze-drying method and mannitol was used as carrier material. Tapped density and MMADt results show that nanocomposite microparticles have suitable aerodynamic properties for pulmonary administration. Antimicrobial efficacy investigations showed that CIP-encapsulated PCL nanoparticles and nanocomposite microparticles inhibited the growth of bacteria. Also, when the antimicrobial activity of the nanoparticles at the beginning and at the sixth month was examined, it was found that the structure of the particulate system was still preserved. These results indicated that nanocomposite microparticles containing CIP-loaded PCL nanoparticles can be used for pulmonary delivery.

Co-delivery of pemetrexed and miR-21 antisense oligonucleotide by lipid-polymer hybrid nanoparticles and effects on glioblastoma cells.

Combination therapy using anticancer drugs and nucleic acid is a more promising strategy to overcome multidrug resistance in cancer and to enhance apoptosis. In this study, lipid-polymer hybrid nanoparticles (LPNs), which contain both pemetrexed and miR-21 antisense oligonucleotide (anti-miR-21), have been developed for treatment of glioblastoma, the most aggressive type of brain tumor. Prepared LPNs have been well characterized by particle size distribution and zeta potential measurements, determination of encapsulation efficiency, and in vitro release experiments. Morphology of LPNs was determined by transmission electron microscopy. LPNs had a hydrodynamic size below 100 nm and exhibited sustained release of pemetrexed up to 10 h. Encapsulation of pemetrexed in LPNs increased cellular uptake from 6% to 78%. Results of confocal microscopy analysis have shown that co-delivery of anti-miR-21 significantly improved accumulation of LPNs in the nucleus of U87MG cells. Nevertheless, more effective cytotoxicity results could not be obtained due to low concentration of anti-miR-21, loaded in LPNs. We expect that the effective drug delivery systems can be obtained with higher concentration of anti-miR-21 for the treatment of glioblastoma.

Lysozyme-loaded lipid-polymer hybrid nanoparticles: preparation, characterization and colloidal stability evaluation.

CONTEXT: Lipid-polymer hybrid nanoparticles (LPNPs) are polymeric nanoparticles enveloped by lipid layers, which have emerged as a potent therapeutic nanocarrier alternative to liposomes and polymeric nanoparticles. OBJECTIVE: The aim of this work was to develop, characterize and evaluate LPNPs to deliver a model protein, lysozyme. MATERIALS AND METHODS: Lysozyme-loaded LPNPs were prepared by using the modified w/o/w double-emulsion-solvent-evaporation method. Poly-ɛ-caprolactone (PCL) was used as polymeric core material and tripalmitin:lechitin mixture was used to form a lipid shell around the LPNPs. LPNPs were evaluated for particle size distribution, zeta potential, morphology, encapsulation efficiency, in vitro drug release, stability and cytotoxicity. RESULTS: The DLS measurement results showed that the particle size of LPNPs ranged from 58.04 ± 1.95 nm to 2009.00 ± 0.52 nm. The AFM and TEM images of LPNPs demonstrate that LPNPs are spherical in shape. The protein-loading capacity of LPNPs ranged from 5.81% to 60.32%, depending on the formulation parameters. LPNPs displayed a biphasic drug release pattern with a burst release within 1 h, followed by sustained release afterward. Colloidal stability results of LPNPs in different media showed that particle size and zeta potential values of particles did not change significantly in all media except of FBS 100% for 120 h. Finally, the results of a cellular uptake study showed that LPNPs were significantly taken up by 83.3% in L929 cells. CONCLUSION: We concluded that the LPNPs prepared with PCL as polymeric core material and tripalmitin:lechitin mixture as lipid shell should be a promising choice for protein delivery.

Development of reconstitutable suspensions containing diclofenac sodium-loaded microspheres for pediatric delivery.

Effective clinical utilisation of non-steroidal anti-inflammatory drugs, such as diclofenac sodium (DS) is significantly limited by their ulcerogenic potential and poor bioavailability after oral administration. The objective of this work was to develop reconstitutable pediatric suspensions of DS-loaded microspheres prepared with an acrylic polymer (Eudragit RS) for improved pediatric delivery of DS. The microspheres were prepared by the water-in-oil-in-water or solid-in-oil-in-water emulsion techniques. Enviromental scanning electron microscopy observations clearly showed that microspheres have spherical shape. The drug entrapment efficiency of these microspheres was found 47.96 ± 0.79% to 88.57 ± 0.59% and their average particle sizes were 23.94-60.78 µm, which are within the desired range for the development of suspension formulation. The in vitro dissolution indicated prolonged sustained release of DS over 8 h. The results of preliminary characterisation studies of suspensions show that a liquid pharmaceutical preparation for oral administration capable of providing a sustained release of DS was successfully obtained.

Preparation and in vitro evaluation of surface-modified poly (lactide-co-glycolide) microparticles as biodegradable drug carriers for pulmonary peptide and protein delivery.

The present study reports the preparation and physicochemical characterization of surface-modified poly(lactide-co-glycolide) (PLGA) microparticles containing interleukin-2 (rhIL-2) for pulmonary delivery. The surface of the microparticles was modified with mucoadhesive polymers such as chitosan and Carbopol 971P. The feasibility of this surface modification was confirmed by measuring the zeta potential. Chitosan-modified PLGA microparticles showed a positive zeta potential, while Carbopol-modified PLGA microparticles were negatively charged. The mucin binding efficiency values have shown that the positively charged chitosan coated microparticles showed a higher adhesive percent to the mucin than the negatively charged un-coated or Carbopol 971P coated microparticles. Furthermore, surface modification of microparticles with chitosan and Carbopol 971P has yielded a slight decrease in the amount of protein initially released. These findings suggest the suitability of surface-modified PLGA microparticles as an efficient carrier system for delivery peptides and proteins to the respiratory tract.

Fast determination of diphenhydramine hydrochloride in reconstitutable syrups by CWT, PLS AND PCR methods.

Diphenhydramine hydrochloride (DPH), a histamine H1-receptor antagonist, is widely used as antiallergic, antiemetic and antitussive drug found in many pharmaceutical preparations. In this study, a new reconstitutable syrup formulation of DPH was prepared because it is more stable in solid form than that in liquid form. The quantitative estimation of the DPH content of a reconstitutable syrup formulation in the presence of pharmaceutical excipients, D-sorbitol, sodium citrate, sodium benzoate and sodium EDTA is not possible by the direct absorbance measurement. Therefore, a signal processing approach based on continuous wavelet transform was used to determine the DPH in the reconstitutable syrup formulations and to eliminate the effect of excipients on the analysis. The absorption spectra of DPH in the range of 5.0-40.0 µg/mL were recorded between 200-300 nm. Various wavelet families were tested and Biorthogonal1.1 continuous wavelet transform (BIOR1.1-CWT) was found to be optimal signal processing family to get fast and desirable determination results and to overcome excipient interference effects. For a comparison of the experimental results obtained by partial least squares (PLS) and principal component regression (PCR) methods were applied to the quantitative prediction of DPH in the mentioned samples. The validity of the proposed BIOR1.1-CWT, PLS and PCR methods were achieved analyzing the prepared samples containing the mentioned excipients and using standard addition technique. It was observed that the proposed graphical and numerical approaches are suitable for the quantitative analysis of DPH in samples including excipients.

PEtOx-DOPE nanoliposomes functionalized with peptide 563 in targeted BikDDA delivery to prostate cancer.

Background: Nanocarrier-based systems have cultivated significant improvements in prostate cancer therapy. However, the efforts are still limited in clinical applicability, and more research is required for the development of effective strategies. Here, we describe a novel nanoliposomal system for targeted apoptotic gene delivery to prostate cancer. Methods: Poly (2-ethyl-2-oxazoline) (PEtOx) dioleoyl phosphatidylethanolamine (DOPE) nanoliposomes were conjugated with the prostate-specific membrane antigen (PSMA)-targeting peptide GRFLTGGTGRLLRIS (P563) and loaded with BikDDA, a mutant form of the proapoptotic Bik. We selected 22Rv1 cells with moderate upregulation of PSMA to test the in vitro uptake, cell death, and in vivo anticancer activity of our formulation, P563-PEtOx-DOPE-BikDDA. Results: BikDDA was upregulated in 22Rv1 cells, inducing cell death, and CD-1 nude mice xenografts administered with the formulation showed significant tumor regression. Conclusion: We suggest that P563-PEtOx-DOPE-BikDDA nanoliposomes can serve as prominent gene carriers against prostate cancer.

Design of Polymeric Nanoparticles for Theranostic Delivery of Capsaicin as Anti-Cancer Drug and Fluorescent Nitrogen-Doped Graphene Quantum Dots.

In recent years, multifunctional nanocarriers that provide simultaneous drug delivery and imaging have attracted enormous attention, especially in cancer treatment. In this research, a biocompatible fluorescent multifunctional nanocarrier is designed for the co-delivery of capsaicin (CPS) and nitrogen-doped graphene quantum dots (N-GQDs) using the pH sensitive amphiphilic block copolymer (poly(2-ethyl-2-oxazoline)-b-poly(ε-caprolactone), PEtOx-b-PCL). The effects of the critical formulation parameters (the amount of copolymer, the concentration of poly(vinyl alcohol) (PVA) as a stabilizing agent in the inner aqueous phase, and volume of the inner phase) are evaluated to achieve optimal nanoparticle (NP) properties using Central Composite Design. The optimized NPs demonstrated a desirable size distribution (167.8 ± 1.4 nm) with a negative surface charge (-19.9 ± 0.4) and a suitable loading capacity for CPS (70.80 ± 0.05%). The CPS & N-GQD NPs are found to have remarkable toxicity on human breast adenocarcinoma cell line (MCF-7). The solid fluorescent signal is acquired from cells containing multifunctional NPs, according to the confocal microscope imaging results, confirming the significant cellular uptake. This research illustrates the enormous potential for cellular imaging and enhanced cancer therapy offered by multifunctional nanocarriers that combine drug substances with the novel fluorescent agents.

Preparation and evaluation of double-walled microparticles prepared with a modified water-in-oil-in-oil-in-water (w1/o/o/w3) method.

In this study, a modified water-in-oil-in-oil-in-water (w1/o/o/w3) method was developed to prepare double-walled microparticles containing ovalbumin (OVA). The microparticles were characterized with respect to their morphology, particle size, encapsulation efficiency, production yield, thermal properties and in vitro drug release. Microscopy observations clearly showed that microparticles have spherical shape and smooth surface. These microparticles were characterized to have double-walled structure, with a cavity in the centre. By using w1/o/o/w3 method, a significant decrease in mean particle size and a significant increase in encapsulation efficiency were obtained. The mean particle size and the encapsulation efficiency of double-walled microparticles were also affected by the changing amount of OVA and mass ratio of polymers. Microparticles prepared with two polymers exhibited a significantly lower initial burst release followed by sustained release compared to microparticles made from poly(d,l-lactide-co-glycolide) 50/50 only. It can be concluded that these microparticles can be a potential delivery system for therapeutic proteins.

Evaluation of Biodegradable Microparticles for Mucosal Vaccination Against Diphtheria Toxoid: Nasal Efficacy Studies in Guinea Pigs.

Objectives: In this study, poly-(ɛ-caprolactone) (PCL) and poly-(lactic-co-glycolic acid) (PLGA) microparticles encapsulating diphtheria toxoid (DT) were investigated for their potential as a mucosal vaccine delivery system. Materials and Methods: Antigen-containing microparticles were prepared using the double emulsion (w/o/w) solvent evaporation method. Results: The average geometric diameter of the particles was found to be between 7 and 24 µm, which is suitable for uptake by the antigen-presenting cells in the nasal mucosa. Although the differences were insignificant, the PLGA polymer-containing formulations exhibited the highest encapsulation efficiency. Microparticle formulations, prepared with both PLGA and PCL polymers, were successfully produced at high production yields. The in vitro release profile was presented as a biexponential process with an initial burst effect due to the release of the protein adsorbed on the microsphere surface, and the subsequent sustained release profile is the result of protein diffusion through the channels or pores formed in the polymer matrix. DT-loaded microparticles, DT solution in phosphate-buffered saline (PBS), and empty microparticles (control) were administered via nasal route and subcutaneously to guinea pigs. The antibody content of each serum sample was determined using an enzyme-linked immunosorbent assay (ELISA). Conclusion: Absorbance values of the ELISA test showed that PLGA- and PCL-bearing microparticles could stimulate an adequate systemic immune response with intranasal vaccination. In addition, PLGA and PCL microparticles resulted in significantly increased IgG titers with intranasal administration as a booster dose following subcutaneous administration. PCL polymer elicited a high immune response compared with PLGA polymer (p <0.05).

Design and in vitro/in vivo Evaluation of Polyelectrolyte Complex Nanoparticles Filled in Enteric-Coated Capsules for Oral Delivery of Insulin.

Insulin is one of the most important drugs in the treatment of diabetes. There is an increasing interest in the oral administration of insulin as it mimics the physiological pathway and potentially reduces the side effects associated with subcutaneous injection. Therefore, insulin-loaded polyelectrolyte complex (PEC) nanoparticles were prepared by the ionic cross-linking method using protamine sulfate as the polycationic and sodium alginate as the anionic polymer. Taguchi experimental design was used for the optimization of nanoparticles by varying the concentration of sodium alginate, the mass ratio of sodium alginate to protamine, and the amount of insulin. The optimized nanoparticle formulation was used for further in vitro characterization. Then, insulin-loaded PEC nanoparticles were placed in hard gelatin capsules and the capsules were enteric-coated by Eudragit L100-55 (PEC-eCAPs). Hypoglycemic effects PEC-eCAPs were determined in vivo by oral administration to diabetic rats. Furthermore, in vivo distribution of PEC nanoparticles was evaluated by fluorescein isothiocyanate (FITC) labelled nanoparticles. The experimental design led to nanoparticles with a size of 194.4 nm and a polydispersity index (PDI) of 0.31. The encapsulation efficiency (EE) was calculated as 95.96%. In vivo studies showed that PEC-eCAPs significantly reduced the blood glucose level of rats at the 8th hour compared to oral insulin solution. It was concluded that PEC nanoparticles loaded into enteric-coated hard gelatin capsules provide a promising delivery system for the oral administration of insulin.

Thermosensitive and pH induced in situ ophthalmic gelling system for ciprofloxacin hydrochloride: hydroxypropyl-beta-cyclodextrin complex.

The prolonged residence of drug formulation in the ocular cavity is important for ocular drug delivery. The purpose of the present study was to develop ophthalmic in situ gelling systems of ciprofloxacin hydrochloride with reduced pre-corneal elimination in order to improve the bioavailability and therapeutic response. Hydroxypropyl-beta-cyclodextrin was used in order to increase the stability of ciprofloxacin hydrochloride. In situ gels were prepared based on the concept of thermosensitive and pH induced in situ gelation. The inclusion complex of ciprofloxacin hydrochloride with hydroxypropyl-beta-cyclodextrin was prepared at a 1:1 molar ratio. The complex formation was thoroughly confirmed using various techniques, including (1)H NMR spectroscopy, FTIR spectrophotometry and differential scanning calorimetry. Both pure ciprofloxacin HCI and the inclusion complex were individually used in the formulations. Formulations were successfully prepared which were liquid at room temperature and exhibited viscosity increase and gelation at ophthalmic temperature. As a result of antimicrobial efficacy and in vitro release experiments, the developed formulations were found therapeutically efficient and provided sustained release of the drug over an 8 h period. These systems can be more advantageous than conventional eye drops.

Effect of hydroxypropyl-beta-cyclodextrin on the solubility, stability and in-vitro release of ciprofloxacin for ocular drug delivery.

Eye drops in the form of an aqueous solution with a lower viscosity are preferred for local administrations in ophthalmology. In ophthalmic formulations, cyclodextrins (CDs) are frequently used in recent years in order to increase water solubility, stability and bioavailability of an active substance and decrease an irritation to the eye. The scope of the present study was to investigate the influence of hydroxypropyl-beta-cyclodextrin (HPCD) on the solubility, stability and in vitro release of ciprofloxacin (CIP). According to the phase solubility studies, A(L) type solubility curve was obtained. HPCD improved the solubility of CIP 3 times at pH 5.5 and 2 times at pH 7.4. The two month stability studies indicated that CIP was more stable at pH 5.5 than at pH 7.4 and the stability of CIP was significantly increased by HPCD. The stability constant of the HPCD:CIP complex was increased further by a-ddition of 0.1% (w/v) polymer (HPMC and PVP) to the aqueous medium including HPCD. Stability constant of solutions prepared in an ultrasonic water bath was higher than solutions prepared by heating in an autoclave. The results indicated that the CIP:HPCD complex increased in vitro release of CIP and the addition of polymer promoted this increase even more.

Preparation and evaluation of poly(lactic-co-glycolic acid) microparticles as a carrier for pulmonary delivery of recombinant human interleukin-2: II. In vitro studies on aerodynamic properties of dry powder inhaler formulations.

OBJECTIVE: The aim of this study was the preparation and evaluation of dry powder formulations of recombinant human interleukin-2 (rhIL-2)-loaded microparticles to be administered to the lung by inhalation. METHODS: As indicated in our previous study, the microparticles were prepared by modified water-in-oil-in-water (w(1)/o/w(3)) double emulsion solvent extraction method using poly(lactic-co-glycolic acid) (PLGA) polymers. The dry powder formulations were prepared with blending of microparticles and mannitol as a coarse carrier. The actual aerodynamic characteristics of the microparticles alone and prepared mixtures with mannitol are evaluated by using the eight-stage Andersen cascade impactor. RESULTS: Due to the low tapped density of microparticles (<0.4 g/cm(3)), the theoretical aerodynamic diameter (MMADt) values were calculated (<5 µm) on the basis of the geometrical particle diameter and tapped density values. The lowest tapped density value (0.17 g/cm(3)) belongs to the cyclodextrin-containing formulation. According to the results obtained using the cascade impactor, the emitted doses for all microparticle formulations were found to be rather high and during the aerosolization for all the formulations except F3 and F5, >90% of the capsule content was determined to be released. However, the actual aerodynamic diameter (MMADa) values were seen to be higher than the MMADt values. The blending of the microparticles with mannitol allowed their aerodynamic diameters to decrease and their fine particle fraction values to increase. CONCLUSION: The obtained results have shown that the mixing of rhIL-2-loaded microparticles with mannitol possess suitable aerodynamic characteristics to be administered to the lungs by inhalation.

Preparation and evaluation of PLGA microparticles as carrier for the pulmonary delivery of rhIL-2 : I. Effects of some formulation parameters on microparticle characteristics.

In this study, recombinant human interleukin-2 (rhIL-2) containing poly(lactic-co-glycolic acid) (PLGA) microparticles were prepared for pulmonary administration by modified w/o/w double emulsion solvent extraction method and the effects of various formulation parameters on the physicochemical properties of the microparticles were investigated. Microparticles in suitable size for pulmonary administration (4.02 µm) were obtained by increasing dichloromethane volume used in the organic phase. Also, a very high encapsulation efficiency (99.22%) value could be reached in these microparticles. In the sodium dodecyl sulphate-polyacrylamide gel electrophoresis analysis, rhIL-2 extracted from microparticles having a similar band with native rhIL-2 showed that the protein was not affected by the encapsulation process. The release curves of microparticles exhibited a biphasic fashion, characterized by a fast release phase at initial 1 day, followed by a slower one on the remaining days. Bioactivity investigations using T cells show that rhIL-2 encapsulated in PLGA microparticles retain their biological activity.