Understanding the bonding mechanisms of organic molecules deposited on graphene for biosensing applications.

Graphene is an ideal material for biosensors due to the large surface area for multiple bonding sites, the high electrical conductivity allowing for high sensitivity, and the high tensile strength providing durability in fabricated sensor devices. For graphene to be successful as a biosensing platform, selectivity must be achieved through functionalization with specific chemical groups. However, the device performance and sensor sensitivity must still be maintained after functionalization, which can be challenging. We compare phenyl amine and 1,5-diaminonaphthalene functionalization methods for chemical vapor deposition grown graphene, both used to obtain graphene modified with amine groups-which is required for surface attachment of highly selective antibody bio-receptors. Through atomic force microscopy (AFM), Raman spectroscopy, and time-of-flight secondary ion mass spectrometry imaging of co-located areas, the chemistry, thickness, and coverage of the functional groups bound to the graphene surface have been comprehensively analyzed. We demonstrate the modification of functionalized graphene using AFM, which unexpectedly suggests the removal of covalently bonded functional groups, resulting in a "recovered" graphene structure with reduced disorder, confirmed with Raman spectroscopy. This removal explains the decrease in the ID/IG ratio observed in Raman spectra from other studies on functionalized graphene after mechanical strain or a chemical reaction and reveals the possibility of reverting to the non-functionalized graphene structure. Through this study, preferred functionalization processes are recommended to maintain the performance properties of graphene as a biosensor.

Nanoscale characterization of plasma functionalized graphitic flakes using tip-enhanced Raman spectroscopy.

The chemical functionalization of graphene nanomaterials allows for the enhancement of their properties for novel functional applications. However, a better understanding of the functionalization process by determining the amount and location of functional groups within individual graphene nanoplatelets remains challenging. In this work, we demonstrate the capability of tip-enhanced Raman spectroscopy (TERS) to investigate the degree and spatial variability of the appearance of disorder in graphitic nanomaterials on the nanoscale with three different levels of nitrogen functionalization. TERS results are in excellent agreement with those of confocal Raman spectroscopy and chemical analysis, determined using x-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry, of the functionalized materials. This work paves the way for a better understanding of the functionalization of graphene and graphitic nanomaterials at the nano-scale, micro-scale, and macro-scale and the relationship between the techniques and how they relate to the changes in material properties of industrial importance.

Nucleation control for large, single crystalline domains of monolayer hexagonal boron nitride via Si-doped Fe catalysts.

The scalable chemical vapor deposition of monolayer hexagonal boron nitride (h-BN) single crystals, with lateral dimensions of ∼0.3 mm, and of continuous h-BN monolayer films with large domain sizes (>25 µm) is demonstrated via an admixture of Si to Fe catalyst films. A simple thin-film Fe/SiO2/Si catalyst system is used to show that controlled Si diffusion into the Fe catalyst allows exclusive nucleation of monolayer h-BN with very low nucleation densities upon exposure to undiluted borazine. Our systematic in situ and ex situ characterization of this catalyst system establishes a basis for further rational catalyst design for compound 2D materials.

Surface Analysis of Pristine and Cycled NMC/Graphite Lithium-Ion Battery Electrodes: Addressing the Measurement Challenges.

Lithium-ion batteries are the most ubiquitous energy storage devices in our everyday lives. However, their energy storage capacity fades over time due to chemical and structural changes in their components, via different degradation mechanisms. Understanding and mitigating these degradation mechanisms is key to reducing capacity fade, thereby enabling improvement in the performance and lifetime of Li-ion batteries, supporting the energy transition to renewables and electrification. In this endeavor, surface analysis techniques are commonly employed to characterize the chemistry and structure at reactive interfaces, where most changes are observed as batteries age. However, battery electrodes are complex systems containing unstable compounds, with large heterogeneities in material properties. Moreover, different degradation mechanisms can affect multiple material properties and occur simultaneously, meaning that a range of complementary techniques must be utilized to obtain a complete picture of electrode degradation. The combination of these issues and the lack of standard measurement protocols and guidelines for data interpretation can lead to a lack of trust in data. Herein, we discuss measurement challenges that affect several key surface analysis techniques being used for Li-ion battery degradation studies: focused ion beam scanning electron microscopy, X-ray photoelectron spectroscopy, Raman spectroscopy, and time-of-flight secondary ion mass spectrometry. We provide recommendations for each technique to improve reproducibility and reduce uncertainty in the analysis of NMC/graphite Li-ion battery electrodes. We also highlight some key measurement issues that should be addressed in future investigations.

Using nuclear magnetic resonance proton relaxation to probe the surface chemistry of carbon 2D materials.

Nanomaterials exhibit a high surface-area-to-mass ratio, making surface properties key to optimising product performance. However, characterising surfaces at the nanoscale is difficult to achieve, especially as nanomaterials are often in liquid dispersions. Herein, we demonstrate the use of nuclear magnetic resonance proton relaxation for rapid characterisation of the surface chemistry of graphitic materials.

Integrated Wafer Scale Growth of Single Crystal Metal Films and High Quality Graphene.

We report on an approach to bring together single crystal metal catalyst preparation and graphene growth in a combined process flow using a standard cold-wall chemical vapor deposition (CVD) reactor. We employ a sandwich arrangement between a commercial polycrystalline Cu foil and c-plane sapphire wafer and show that close-spaced vacuum sublimation across the confined gap can result in an epitaxial, single-crystal Cu(111) film at high growth rate. The arrangement is scalable (we demonstrate 2″ wafer scale) and suppresses reactor contamination with Cu. While starting with an impure Cu foil, the freshly prepared Cu film is of high purity as measured by time-of-flight secondary ion mass spectrometry. We seamlessly connect the initial metallization with subsequent graphene growth via the introduction of hydrogen and gaseous carbon precursors, thereby eliminating contamination due to substrate transfer and common lengthy catalyst pretreatments. We show that the sandwich approach also enables for a Cu surface with nanometer scale roughness during graphene growth and thus results in high quality graphene similar to previously demonstrated Cu enclosure approaches. We systematically explore the parameter space and discuss the opportunities, including subsequent dry transfer, generality, and versatility of our approach particularly regarding the cost-efficient preparation of different single crystal film orientations and expansion to other material systems.

Understanding metal organic chemical vapour deposition of monolayer WS2: the enhancing role of Au substrate for simple organosulfur precursors.

We find that the use of Au substrate allows fast, self-limited WS2 monolayer growth using a simple sequential exposure pattern of low cost, low toxicity precursors, namely tungsten hexacarbonyl and dimethylsulfide (DMS). We use this model reaction system to fingerprint the technologically important metal organic chemical vapour deposition process by operando X-ray photoelectron spectroscopy (XPS) to address the current lack of understanding of the underlying fundamental growth mechanisms for WS2 and related transition metal dichalcogenides. Au effectively promotes the sulfidation of W with simple organosulfides, enabling WS2 growth with low DMS pressure (<1 mbar) and a suppression of carbon contamination of as-grown WS2, which to date has been a major challenge with this precursor chemistry. Full WS2 coverage can be achieved by one exposure cycle of 10 minutes at 700 °C. We discuss our findings in the wider context of previous literature on heterogeneous catalysis, 2D crystal growth, and overlapping process technologies such as atomic layer deposition (ALD) and direct metal conversion, linking to future integrated manufacturing processes for transition metal dichalcogenide layers.

Determining the Level and Location of Functional Groups on Few-Layer Graphene and Their Effect on the Mechanical Properties of Nanocomposites.

Graphene is a highly desirable material for a variety of applications; in the case of nanocomposites, it can be functionalized and added as a nanofiller to alter the ultimate product properties, such as tensile strength. However, often the material properties of the functionalized graphene and the location of any chemical species, attached via different functionalization processes, are not known. Thus, it is not necessarily understood why improvements in product performance are achieved, which hinders the rate of product development. Here, a commercially available powder containing few-layer graphene (FLG) flakes is characterized before and after plasma or chemical functionalization with either nitrogen or oxygen species. A range of measurement techniques, including tip-enhanced Raman spectroscopy (TERS), time-of-flight secondary ion mass spectrometry (ToF-SIMS), and NanoSIMS, were used to examine the physical and chemical changes in the FLG material at both the micro- and nanoscale. This is the first reported TERS imaging of commercially available FLG flakes of submicron lateral size, revealing the location of the defects (edge versus basal plane) and variations in the level of functionalization. Graphene-polymer composites were then produced, and the dispersion of the graphitic material in the matrix was visualized using ToF-SIMS. Finally, mechanical testing of the composites demonstrated that the final product performance could be enhanced but differed depending on the properties of the original graphitic material.

Unusual oxidation-induced core-level shifts at the HfO2/InP interface.

X-ray photoelectron spectroscopy (XPS) is one of the most used methods in a diverse field of materials science and engineering. The elemental core-level binding energies (BE) and core-level shifts (CLS) are determined and interpreted in the XPS. Oxidation is commonly considered to increase the BE of the core electrons of metal and semiconductor elements (i.e., positive BE shift due to O bonds), because valence electron charge density moves toward electronegative O atoms in the intuitive charge-transfer model. Here we demonstrate that this BE hypothesis is not generally valid by presenting XPS spectra and a consistent model of atomic processes occurring at HfO2/InP interface including negative In CLSs. It is shown theoretically for abrupt HfO2/InP model structures that there is no correlation between the In CLSs and the number of oxygen neighbors. However, the P CLSs can be estimated using the number of close O neighbors. First native oxide model interfaces for III-V semiconductors are introduced. The results obtained from ab initio calculations and synchrotron XPS measurements emphasize the importance of complementary analyses in various academic and industrial investigations where CLSs are at the heart of advancing knowledge.

Physicochemical characterisation of reduced graphene oxide for conductive thin films.

Graphene is a desirable material for next generation technology. However, producing high yields of single-layer flakes with industrially applicable methods is currently limited. We introduce a combined process for the reduction of graphene oxide (GO) via vitamin C (ascorbic acid) and thermal annealing at temperatures of <150 °C for times of <10 minutes, resulting in electrically conducting thin films with sheet resistances reducing by 8 orders of magnitude to as low as ∼1.3 kΩ â–¡-1, suitable for microelectronics, display technology and optoelectronic applications. The in-depth physicochemical characterisation of the products at different stages of GO preparation and reduction allows for further understanding of the process and demonstrates the suitability for industrial production methodologies due to an environmentally-friendly reducing agent, solution processability and no requirement for high temperatures. The presence of the vitamin C lowers the temperature required to thermally reduce the GO into an electrically conducting thin film, making the technique suitable for thermally sensitive substrates, such as low melting point polymers. Simultaneous spray coating and reduction of GO allows for large area deposition of conductive coatings without sacrificing solution processability, often lost through particle agglomeration, making it compatible with industrial processes, and applicable to, for example, the production of sensors, energy devices and flexible conductive electrodes for touchscreens.

Understanding and Controlling Cu-Catalyzed Graphene Nucleation: The Role of Impurities, Roughness, and Oxygen Scavenging.

The mechanism by which Cu catalyst pretreatments control graphene nucleation density in scalable chemical vapor deposition (CVD) is systematically explored. The intrinsic and extrinsic carbon contamination in the Cu foil is identified by time-of-flight secondary ion mass spectrometry as a major factor influencing graphene nucleation and growth. By selectively oxidizing the backside of the Cu foil prior to graphene growth, a drastic reduction of the graphene nucleation density by 6 orders of magnitude can be obtained. This approach decouples surface roughness effects and at the same time allows us to trace the scavenging effect of oxygen on deleterious carbon impurities as it permeates through the Cu bulk. Parallels to well-known processes in Cu metallurgy are discussed. We also put into context the relative effectiveness and underlying mechanisms of the most widely used Cu pretreatments, including wet etching and electropolishing, allowing a rationalization of current literature and determination of the relevant parameter space for graphene growth. Taking into account the wider CVD growth parameter space, guidelines are discussed for high-throughput manufacturing of "electronic-quality" monolayer graphene films with domain size exceeding 1 mm, suitable for emerging industrial applications, such as electronics and photonics.

In Situ XPS Chemical Analysis of MnSiO3 Copper Diffusion Barrier Layer Formation and Simultaneous Fabrication of Metal Oxide Semiconductor Electrical Test MOS Structures.

Copper/SiO2/Si metal-oxide-semiconductor (MOS) devices both with and without a MnSiO3 barrier layer at the Cu/SiO2 interface have been fabricated in an ultrahigh vacuum X-ray photoelectron spectroscopy (XPS) system, which allows interface chemical characterization of the barrier formation process to be directly correlated with electrical testing of barrier layer effectiveness. Capacitance voltage (CV) analysis, before and after tube furnace anneals of the fabricated MOS structures showed that the presence of the MnSiO3 barrier layer significantly improved electric stability of the device structures. Evidence of improved adhesion of the deposited copper layer to the MnSiO3 surface compared to the clean SiO2 surface was apparent both from tape tests and while probing the samples during electrical testing. Secondary ion mass spectroscopy (SIMS) depth profiling measurements of the MOS test structures reveal distinct differences of copper diffusion into the SiO2 dielectric layers following the thermal anneal depending on the presence of the MnSiO3 barrier layer.

Probing individual point defects in graphene via near-field Raman scattering.

The Raman scattering D-peak in graphene is spatially localised in close proximity to defects. Here, we demonstrate the capability of tip-enhanced Raman spectroscopy (TERS) to probe individual point defects, even for a graphene layer with an extremely low defect density. This is of practical interest for future graphene electronic devices. The measured TERS spectra enable a direct determination of the average inter-defect distance within the graphene sheet. Analysis of the TERS enhancement factor of the graphene Raman peaks highlights the preferential enhancement and symmetry-dependent selectivity of the D-peak intensity caused by zero-dimensional Raman scatterers.

Silicon interfacial passivation layer chemistry for high-k/InP interfaces.

The interfacial chemistry of thin (1 nm) silicon (Si) interfacial passivation layers (IPLs) deposited on acid-etched and native oxide InP(100) samples prior to atomic layer deposition (ALD) is investigated. The phosphorus oxides are scavenged completely from the acid-etched samples but not completely from the native oxide samples. Aluminum silicate and hafnium silicate are possibly generated upon ALD and following annealing. The thermal stability of a high-k/Si/InP (acid-etched) stack are also studied by in situ annealing to 400 and 500 °C under ultrahigh vacuum, and the aluminum oxide/Si/InP stack is the most thermally stable. An indium out-diffusion to the sample surface is observed through the Si IPL and the high-k dielectric, which may form volatile species and evaporate from the sample surface.

Auditory click stimuli evoke event-related potentials in the visual cortex.

The objective of this study was to determine whether unimodal auditory stimuli evoke event-related potentials (ERPs) in brain areas normally designated as the visual cortex (VC). The topographical distribution of ERPs evoked by auditory click stimuli was measured from (a) electroencephalographic electrodes on the scalp of six neurologically normal adult human participants and (b) intracranial electrodes implanted on the cortex of one epileptic adult human participant. In all participants, unimodal click stimuli evoked ERPs over both the auditory cortex (AC) and the VC. Relative amplitudes of ERPs at different scalp electrodes did not support the idea that the ERPs over VC were volume-conducted versions of those over AC, and intracranial records confirmed the origin of some click-evoked ERPs in both V1 and other regions of VC. We conclude that unimodal auditory stimuli can evoke ERPs in VC. This finding adds to the earlier evidence for the effect of visual stimuli on AC by providing new evidence for bidirectional functional connectivity in the audio-visual network of the human brain. The implication is that not only do visual stimuli affect hearing; auditory stimuli also affect visual perception.

HfO(2) on MoS(2) by atomic layer deposition: adsorption mechanisms and thickness scalability.

We report our investigation of the atomic layer deposition (ALD) of HfO2 on the MoS2 surface. In contrast to previous reports of conformal growth on MoS2 flakes, we find that ALD on MoS2 bulk material is not uniform. No covalent bonding between the HfO2 and MoS2 is detected. We highlight that individual precursors do not permanently adsorb on the clean MoS2 surface but that organic and solvent residues can dramatically change ALD nucleation behavior. We then posit that prior reports of conformal ALD deposition on MoS2 flakes that had been exposed to such organics and solvents likely rely on contamination-mediated nucleation. These results highlight that surface functionalization will be required before controllable and low defect density high-κ/MoS2 interfaces will be realized. The band structure of the HfO2/MoS2 system is experimentally derived with valence and conduction band offsets found to be 2.67 and 2.09 eV, respectively.

A possible physiological basis for the discontinuity of consciousness.

A comparison is made between the frequency of local minima in the analytic power (AP) of intracranial EEG (ECoG) from waking and unconscious human subjects and the frequency of putative frames of consciousness reported in earlier psychological literature. In ECoG from unconscious subjects, the frequency of deep minima in AP is found to be a linear function of bandwidth. In contrast, in ECoG from conscious subjects, the bandwidth/minima-frequency curve saturates or plateaus at minima frequencies similar to the frequencies of previously reported frames of consciousness. This result is consistent with the hypothesis that local minima in AP may act as the shutter in a cinematographic model of consciousness. The fact that artificially generated samples of black noise with power spectra similar to ECoG data give similar results in the analyses above suggests that the discontinuous nature of consciousness is not due to some specifically biological factor, but is simply a consequence of the physical properties of the 1/f (aka power law) oscillations that are widely found in nature.

Spatial resolution and the neural correlates of sensory experience.

Freeman and Baird [5; Freeman WJ, Baird B. Behav Neurosci 1987;101:393-408] recorded from the surface of the brain in waking rabbits and found spatial patterns of voltage that covaried with sensory experience. We simulate mathematically the electric fields produced by radial dipoles in cortical gyri and show that patterns with the spatial frequencies observed by Freeman and Baird could be produced by cortical dipoles spaced 3 mm apart. We further calculate that to resolve the patterns produced by such dipole arrays, it is necessary to record less than 2.5 mm above the surface of the cortex. High-pass spatial filters increase this distance to 4.5 mm. Since the human scalp is 15-16 mm above the brain, we conclude that spatial patterns of voltage covarying with sensation are unlikely to be detectable in scalp records. If such patterns do exist in humans, dural or sub-dural electrode arrays, with an inter-electrode spacing of 1 mm or less, will be necessary to record them.