RESUMO
Poly(lactide) (PLA) and poly(ethylene glycol) (PEG)-based hydrogels were prepared by mixing phosphate buffer saline (PBS, pH 7.4) solutions of four-arm (PEG-PLA)2-R-(PLA-PEG)2 enantiomerically pure copolymers having the opposite chirality of the poly(lactide) blocks. Dynamic Light Scattering, rheology measurements, and fluorescence spectroscopy suggested that, depending on the nature of the linker R, the gelation process followed rather different mechanisms. In all cases, mixing of equimolar amounts of the enantiomeric copolymers led to micellar aggregates with a stereocomplexed PLA core and a hydrophilic PEG corona. Yet, when R was an aliphatic heptamethylene unit, temperature-dependent reversible gelation was mainly induced by entanglements of PEG chains at concentrations higher than 5 wt.%. When R was a linker containing cationic amine groups, thermo-irreversible hydrogels were promptly generated at concentrations higher than 20 wt.%. In the latter case, stereocomplexation of the PLA blocks randomly distributed in micellar aggregates is proposed as the major determinant of the gelation process.
Assuntos
Polietilenoglicóis , Polímeros , Polímeros/química , Polietilenoglicóis/química , Poliésteres/química , Micelas , Hidrogéis/químicaRESUMO
The thermal, mechanical, and rheological properties of biocomposites of poly(lactic acid) (PLA) with potato pulp powder were investigated in order to (1) quantify how the addition of this filler modifies the structure of the polymeric material and (2) to obtain information on the possible miscibility and compatibility between PLA and the potato pulp. The potato pulp powder utilized is a residue of the processing for the production and extraction of starch. The study was conducted by analyzing the effect of the potato pulp concentration on the thermal, mechanical, and rheological properties of the biocomposites. The results showed that the potato pulp powder does not act as reinforcement but as filler for the PLA polymeric matrix. A progressive decrease in elastic modulus, tensile strength, and elongation at break was observed with increasing the potato pulp percentage. This moderate loss of mechanical properties, however, still meets the technical requirements indicated for the production of rigid packaging items. The incorporation of potato pulp powder to PLA offers the possibility to reduce the cost of the final products and promotes a circular economy approach for the valorization of agro-food waste biomass.
Assuntos
Materiais Biocompatíveis/química , Poliésteres/química , Solanum tuberosum/química , Amido/química , Módulo de Elasticidade , Pós , Reologia , Temperatura , Resistência à TraçãoRESUMO
BACKGROUND: Pea, lentil, faba bean, chickpea and bean proteins are potentially renewable raw materials for bioplastic production that can be obtained from agricultural waste. Plastics are usually processed under heating, and thus thermal stability is a mandatory requirement for the application. In this study, the thermal behavior of several legume protein isolates at different purity degrees was investigated. RESULTS: The thermal stability of proteins extracted from legumes was maximum for chickpeas and minimum for beans and decreased with decreasing protein purity in the range 30-88%. A similar dependence on purity was observed for the glass transition temperature. On the contrary, the denaturation temperature was found not to depend on sample purity and origin and was lower than the degradation temperature only in the case of protein samples with purity higher than 60%. CONCLUSION: Proteins from legumes are suitable to produce thermoplastic biopolymeric materials if isolated at purity higher than 60%. In fact, under this circumstance, they can be denaturized without degrading and thus are suitable for extrusion processing. © 2018 Society of Chemical Industry.
Assuntos
Fabaceae/química , Proteínas de Plantas/química , Varredura Diferencial de Calorimetria , Fabaceae/classificação , Temperatura Alta , Desnaturação Proteica , Espectroscopia de Infravermelho com Transformada de Fourier , TermogravimetriaRESUMO
Dielectric Spectroscopy (DS) and 1H Fast Field-Cycling (FFC) NMR relaxometry were applied for understanding the dynamic behavior of the amorphous ter-polymer poly(vinyl butyral) (PVB) across the glass transition temperature (Tg = 70 °C by Differential Scanning Calorimetry). Above Tg, main chain segmental motions (α relaxation) were detected and characterized using both DS and FFC NMR relaxometry. The correlation times extracted by the analysis of DS and FFC NMR relaxometry data agreed within a factor of three and showed a Vogel-Fulcher-Tammann temperature dependence, with an associated Tg of 69 °C and a fragility of 155 for PVB glass. Below Tg, a secondary process (ß relaxation) was revealed by DS, and was ascribed to reorientations of the vinyl alcohol dipoles due to local twisting motions with an associated activation barrier of 11 kcal mol-1. The ß process was also found to contribute to 1H NMR relaxation above Tg.
RESUMO
The ability of microplastics (MPs) to interact with environmental pollutants is currently of great concern due to the increasing use of plastic. Agricultural soils are sinks for multipollutants and the safety of biodegradable MPs in field conditions is questioned. However, still few studies have investigated the interactive effects between MPs and metals on the soil-plant system with agricultural soil and testing crops for human consumption. In this work, we tested the effect on soil and plant parameters of two common MPs, non-degradable plastic low-density polyethylene and biodegradable polymer polylactic acid at two different sizes (<250 µm and 250-300 µm) in association with arsenic (As). Lettuce (Lactuca sativa L.) was used as a model plant in a small-scale experiment lasting 60 days. Microplastics and As explained 12 % and 47 % of total variance, respectively, while their interaction explained 21 %, suggesting a higher toxic impact of As than MPs. Plant growth was promoted by MPs alone, especially when biodegradable MPs were added (+22 %). However, MPs did not affect nutrient concentrations in roots and leaves. The effect of MPs on enzyme activities was variable depending on the time of exposure (with larger effects immediately after exposure), the type and size of the MPs. On the contrary, the co-application of MP and As, although it did not change the amount of bioavailable As in soil in the short and medium term, it resulted in a significant decrease in lettuce biomass (-19 %) and root nutrient concentrations, especially when polylactic acid was applied. Generally, MPs in association with As determined the plant-soil toxicity. This work provides insights into the risk of copollution of MPs and As in agricultural soil and its phytotoxic effect for agricultural crops. However, the mechanisms of the joint effect of MP and As on plant toxicity need further investigation, especially under field conditions and in long-term experiments.
Assuntos
Arsênio , Solo , Humanos , Microplásticos , Plásticos , Agricultura , Produtos Agrícolas , Lactuca , PolietilenoRESUMO
In this paper, we present two novel experimental setups specifically designed to perform in situ long-term monitoring of the aging behaviour of commercial plastic granules (HDPE, PP, PLA and PBAT). The results of the first six months of a three year monitoring campaign are presented. The two experimental setups consist of: (i) special cages positioned close to the sea floor at a depth of about 10 m, and (ii) a box containing sand exposed to atmospheric agents to simulate the surface of a beach. Starting from March 2020, plastic granules were put into the cages and plunged in seawater and in a sandboxe. Chemical spectroscopic and thermal analyses (GPC, SEM, FTIR-ATR, DSC, TGA) were performed on the granules before and after exposure to natural elements for six months, in order to identify the physical-chemical modifications occurring in marine environmental conditions (both in seawater and in sandy coastal conditions). Changes in colour, surface morphology, chemical composition, thermal properties, molecular weight and polydispersity, showed the different influences of the environmental conditions. Photooxidative reaction pathways were prevalent in the sandbox. Abrasive phenomena acted specially in the sea environment. PLA and PBAT did not show significant degradation after six months, making the possible reduction of marine pollution due to this process negligible.
RESUMO
Polyvinyl butyral (PVB) is an amorphous polymer employed in many technological applications. In order to highlight the relationships between macroscopic properties and dynamics at a microscopic level, motions of the main-chain and of the propyl side-chains were investigated between Tg - 288 °C and Tg + 55 °C, with Tg indicating the glass transition temperature. To this aim, a combination of solid state Nuclear Magnetic Resonance (NMR) methods was applied to two purposely synthesized PVB isotopomers: one fully protonated and the other perdeuterated on the side-chains. 1H time domain NMR and 1H field cycling NMR relaxometry experiments, performed across and above Tg, revealed that the dynamics of the main-chain corresponds to the α-relaxation associated to the glass transition, which was previously characterized by dielectric spectroscopy. A faster secondary relaxation was observed for the first time and ascribed to side-chains. The geometry and rate of motions of the different groups in the side-chains were characterized below Tg by 2H NMR spectroscopy.
RESUMO
1,6-Diisocyanatohexane and dimethyl sulfoxide were exploited as crosslinking agent and reaction solvent, respectively, for gelatin modification. Crosslinked samples were fractionated and analyzed by thermogravimetric analysis, infrared spectroscopy, acid and base titrations, and swelling measurements. The yield of crosslinking was found to increase with increasing diisocyanate and gelatin concentrations and the amount of bound crosslinker was evaluated. The chemical analysis of the reaction products allowed the process parameters to be related to the properties of the textile/gelatin composites. For this purpose poly(propylene)-, poly(ethylene terephthalate)-, and cotton-based textiles were treated to prepare soft and dimensionally stable supported materials with a gel phase composed of gelatin.
Assuntos
Reagentes de Ligações Cruzadas/química , Cianatos/química , Gelatina/química , Fibra de Algodão , Isocianatos , Teste de Materiais , Estrutura Molecular , Propriedades de Superfície , Termogravimetria , Água/químicaRESUMO
A computational approach to simulate the formation of possible imprinted polymers in acetonitrile solution for theophylline (THO) is proposed, using combined molecular dynamics (MD), molecular mechanics (MM), docking and site mapping computational techniques. Methacrylic acid (MAA) and methylmethacrylate (MMA) monomers are used to simulate possible homo and copolymer structures. The model is able predict binding affinity and selectivity when considering THO analogues, such as caffeine, theobromine, xanthine and 3-methylxanthine. Comparison with available experimental data is proposed.
Assuntos
Técnicas Biossensoriais/instrumentação , Simulação por Computador , Modelos Teóricos , Polímeros , Metacrilatos , MetilmetacrilatoRESUMO
The binding of Cr(III) with (2R,3S,4R)-(+)-3,3',4,4',7-flavanpentol in aqueous solution is investigated by atomistic molecular dynamics simulations concentrating the analysis of the sampled data on the polyphenol ability to chelate metal ions and to form large noncovalently bonded molecular and supramolecular architectures.
Assuntos
Cromo/química , Flavonoides/química , Fenóis/química , Ligação de Hidrogênio , Modelos Moleculares , Estrutura Molecular , PolifenóisRESUMO
In this work, a combination of experimental and quantum mechanical investigations is performed for the study of dichroic absorption properties of melt-processed linear low-density polyethylene (LLDPE) oriented films containing < or =0.5 wt % of either 4,4'-bis(2-benzoxazolyl)stilbene (BBS) or 2,5-bis(5-tert-butyl-2-benzoxazolyl)thiophene (BTBBT). The data acquired reveal that the film optical anisotropy and the performances as linear polarizer are strongly dependent on the molecular structure of the chromophore. In particular, the rodlike structure of BBS favors the alignment of the dye along the drawing direction of the PE film, providing dichroic ratios as high as 100 and optical performances as linear polarizer close to the pseudo-affine deformation scheme. On the contrary BTBBT, although characterized by huge anisotropic potentialities, confers the oriented film very poor dichroism and is unsuitable for linear polarizer applications. This behavior is attributed to the more complex banana-shaped structure of BTBBT dye caused by the thiophene 2,5-functionalization that limits the molecule parallel orientation to the drawing direction.
RESUMO
Emulsion blending as a new method to combine a water-soluble biopolymer, gelatin, with a synthetic biodegradable elastomer, poly(butylene succinate-co-adipate) (PBSA), was investigated. Blending by wet processing a hydrophilic biopolymer with a hydrophobic synthetic polymer aimed at evaluating the potential for improving the mechanical properties of the biopolymer without affecting its biodegradability. The effect of the variation of blend composition, and of the experimental procedure for the emulsification and the subsequent preparation of cast films from the resulting oil-in-water emulsions was analyzed. In particular, processing temperature, concentration of the precursor solutions (aqueous gelatin and PBSA in dichloromethane, respectively), blending method and post treatment conditions (T, P) affect the quality and stability of the aqueous gelatin emulsion containing PBSA in dichloromethane as the dispersed phase. Control of the aqueous phase viscosity is a key parameter for both the emulsion stability and the morphology of the final heterophasic cast films. In fact, viscosity must be sufficiently low to allow high shear emulsification, but high enough to prevent coalescence among the organic phase droplets. The process conditions optimized for a 80/20 blend were extended to the preparation of blends with 5-30 wt % PBSA. It was found that evaporation of the organic phase must be nearly quantitative before casting to allow the formation of uniform films at any investigated composition of the immiscible polymer blend. In fact, when the films are produced by casting, the presence of residual organic solvent along with too high a viscosity of the aqueous gelatin phase promotes the formation of cavities opening up at the lower film surface as a result of the higher density of CH2Cl2. However, such cavities, internally sheathed with PBSA microbeads precipitated upon evaporation of the organic phase, if smaller than 100 µm turned out to improve the flexibility of the films.
RESUMO
Industrial processing of materials containing quartz induces physico-chemical modifications that contribute to the variability of quartz hazard in different plants. Here, modifications affecting a quartz-rich sand during cast iron production, have been investigated. Composition, morphology, presence of radicals associated to quartz and reactivity in free radical generation were studied on a raw sand and on a dust recovered after mould dismantling. Additionally, cytotoxicity of the processed dust and ROS and NO generation were evaluated on MH-S macrophages. Particle morphology and size were marginally affected by casting processing, which caused only a slight increase of the amount of respirable fraction. The raw sand was able to catalyze OH and CO2(-) generation in cell-free test, even if in a lesser extent than the reference quartz (Min-U-Sil), and shows hAl radicals, conventionally found in any quartz-bearing raw materials. Enrichment in iron and extensive coverage with amorphous carbon were observed during processing. They likely contributed, respectively, to increasing the ability of processed dust to release CO2- and to suppressing OH generation respect to the raw sand. Carbon coverage and repeated thermal treatments during industrial processing also caused annealing of radiogenic hAl defects. Finally, no cellular responses were observed with the respirable fraction of the processed powder.
Assuntos
Macrófagos Alveolares/efeitos dos fármacos , Quartzo/química , Animais , Poeira , Ferro , Camundongos , Óxido Nítrico/metabolismo , Espécies Reativas de Oxigênio/metabolismo , Dióxido de SilícioRESUMO
The structure, stability, and conformational dynamics of an assembly of two pentameric bundles made of collagen-like triple helical segments are explored using 1.2 ns molecular dynamics simulations in three environments: 8.0% (v/v) formaldehyde/water solution, 1.4% (v/v) gallic acid/water solution, and pure water. Stable supramolecular arrangements, where the two collagen units are very close to each other at interacting distances, are identified via docking and energy minimization procedures. Analysis of the interaction with formaldehyde and gallic acid suggests that they perturb the protein in a similar way depending on hydrogen-bonding capability, hydrophobic association properties, and the size and concentration of the compound.
Assuntos
Colágeno/química , Aminoácidos/química , Simulação por Computador , Formaldeído , Ácido Gálico/química , Ligação de Hidrogênio , Concentração de Íons de Hidrogênio , Modelos Químicos , Modelos Moleculares , Conformação Proteica , Estrutura Secundária de Proteína , Soluções , ÁguaRESUMO
In this work we present controlled, low-damage nanotopographic surface modification of poly(ethylene terephthalate) (PET). High-resolution nanopatterning over macroscopic areas was performed by " low-temperature" hot embossing lithography (HEL). While for standard HEL the temperature is typically raised up to many tens of Celsius degrees above the polymer glass transition temperature (Tg), we demonstrate optimal results at a temperature very close to the bulk Tg of PET (72 degrees C). Nanopits and nanobarcodes were transferred onto the surface of PET commercial sheets, demonstrating reliable sub-100 nm resolution over macroscopic areas. Sample optical, mechanical, and thermal characteristics were systematically analyzed before and after embossing at low (75 degrees C) and high (150 degrees C) temperature by attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy, tensile tests, and differential scanning calorimetry (DSC). We show that, while conventional high-temperature HEL can lead to dramatic degradation of the polymer in terms of transparency, flexibility, and crystallinity content, our low-temperature process fully maintains original surface and bulk substrate properties.
RESUMO
Conformational analysis of (2R,3S,4R)-(+)-3,3',4,4',7-flavanpentol, a flavonoid compound displaying both antioxidant and pro-oxidant properties, is performed by molecular mechanics and density functional theory calculations both in the gas phase and in methanol solution by using the Polarizable Continuum Model. Nine different conformations are identified. Absorption (UV) and circular dichroism (CD) spectra and optical rotations are calculated by means of time dependent density functional theory (TDDFT) and compared with experiments. The effects of a complex environment formed by water and proline-rich peptide molecules on the conformational characteristics of (2R,3S,4R)-(+)-3,3',4,4',7-flavanpentol and therefore on its UV and CD spectra are investigated by atomistic molecular dynamics simulations.