Pincer Platinum(II) Hydrides: High Stability Imparted by Donor-Flexible Pyridylidene Amide Ligands and Evidence for Adduct Formation before Protonation.

Donor-flexible ligands are an emerging class of noninnocent ligands. Their ability to adapt their donating strength toward a metal center has had numerous catalytic advantages yet has never been utilized to stabilize and isolate intermediate complexes within these processes. We demonstrate through the use of a pincer ligand containing two donor-flexible pyridylidene amide (PYA) arms in coordination with platinum(II) that this ligand adaptability revealed remarkably stable hydride and formate complexes. These are typically fleeting catalytic intermediates within formic acid dehydrogenation and CO2 hydrogenation catalytic cycles. The PYA platinum hydride complexes are indefinitely stable in air, while formate complexes show no sign of ß-hydrogen elimination. This robustness allowed us to investigate hydride protonation as a seemingly simple reaction, though in-depth kinetic analysis reveals a pre-equilibrium step prior to platinum hydride protonation. This initial step has been attributed to adduct formation and is slower than the protonation, and therefore a relevant aspect when designing catalytic cycles for hydrogen release and its microscopic reverse, viz., hydrogen uptake.

Pincer and Macrocyclic Pyridylidene Amide (PYA) AuIII Complexes.

Gold-based homogeneous catalysis is dominated by redox neutral AuI systems. Redox-active gold-based catalysts are less common, principally because of redox cycles between AuI and AuIII being hampered by unfavorable potentials. We report gold(III) complexes containing pincer-based, donor-flexible pyridylidene amide (PYA) ligands to address these issues. These complexes act as electron reservoirs through two limiting resonance structures consisting of either soft, imine coordination sites or harder, zwitterionic amide donors. We further alter the donor properties by using the ortho-, meta-, and para-pyridylidene amide variants of the PYA pincer arms. These bis-PYA pincer ligands exhibited a high contribution of amide coordination in the solid-state of the gold(III) complexes; however, the solution data suggests a high contribution from the neutral L-type resonance forms. This L-type contribution, primarily shown through cyclic voltammetry studies, prevents reversible gold(III) reduction and also disfavors abstraction of the ancillary chloride ligand. Furthermore, a novel macrocyclic-PYA ligand is introduced, which shows secondary metal-ligand interactions.

A Series of Crystallographically Characterized Linear and Branched σ-Alkane Complexes of Rhodium: From Propane to 3-Methylpentane.

Using solid-state molecular organometallic (SMOM) techniques, in particular solid/gas single-crystal to single-crystal reactivity, a series of σ-alkane complexes of the general formula [Rh(Cy2PCH2CH2PCy2)(ηn:ηm-alkane)][BArF4] have been prepared (alkane = propane, 2-methylbutane, hexane, 3-methylpentane; ArF = 3,5-(CF3)2C6H3). These new complexes have been characterized using single crystal X-ray diffraction, solid-state NMR spectroscopy and DFT computational techniques and present a variety of Rh(I)···H-C binding motifs at the metal coordination site: 1,2-η2:η2 (2-methylbutane), 1,3-η2:η2 (propane), 2,4-η2:η2 (hexane), and 1,4-η1:η2 (3-methylpentane). For the linear alkanes propane and hexane, some additional Rh(I)···H-C interactions with the geminal C-H bonds are also evident. The stability of these complexes with respect to alkane loss in the solid state varies with the identity of the alkane: from propane that decomposes rapidly at 295 K to 2-methylbutane that is stable and instead undergoes an acceptorless dehydrogenation to form a bound alkene complex. In each case the alkane sits in a binding pocket defined by the {Rh(Cy2PCH2CH2PCy2)}+ fragment and the surrounding array of [BArF4]- anions. For the propane complex, a small alkane binding energy, driven in part by a lack of stabilizing short contacts with the surrounding anions, correlates with the fleeting stability of this species. 2-Methylbutane forms more short contacts within the binding pocket, and as a result the complex is considerably more stable. However, the complex of the larger 3-methylpentane ligand shows lower stability. Empirically, there therefore appears to be an optimal fit between the size and shape of the alkane and overall stability. Such observations are related to guest/host interactions in solution supramolecular chemistry and the holistic role of 1°, 2°, and 3° environments in metalloenzymes.

Selectivity of Rh⋠⋠⋠H-C Binding in a σ-Alkane Complex Controlled by the Secondary Microenvironment in the Solid State.

Single-crystal to single-crystal solid-state molecular organometallic (SMOM) techniques are used for the synthesis and structural characterization of the σ-alkane complex [Rh(tBu2 PCH2 CH2 CH2 PtBu2 )(η2 ,η2 -C7 H12 )][BArF 4 ] (ArF =3,5-(CF3 )2 C6 H3 ), in which the alkane (norbornane) binds through two exo-C-H⋅⋅⋅Rh interactions. In contrast, the bis-cyclohexyl phosphine analogue shows endo-alkane binding. A comparison of the two systems, supported by periodic DFT calculations, NCI plots and Hirshfeld surface analyses, traces this different regioselectivity to subtle changes in the local microenvironment surrounding the alkane ligand. A tertiary periodic structure supporting a secondary microenvironment that controls binding at the metal site has parallels with enzymes. The new σ-alkane complex is also a catalyst for solid/gas 1-butene isomerization, and catalyst resting states are identified for this.

Room Temperature Acceptorless Alkane Dehydrogenation from Molecular σ-Alkane Complexes.

The non-oxidative catalytic dehydrogenation of light alkanes via C-H activation is a highly endothermic process that generally requires high temperatures and/or a sacrificial hydrogen acceptor to overcome unfavorable thermodynamics. This is complicated by alkanes being such poor ligands, meaning that binding at metal centers prior to C-H activation is disfavored. We demonstrate that by biasing the pre-equilibrium of alkane binding, by using solid-state molecular organometallic chemistry (SMOM-chem), well-defined isobutane and cyclohexane σ-complexes, [Rh(Cy2PCH2CH2PCy2)(η:η-(H3C)CH(CH3)2][BArF4] and [Rh(Cy2PCH2CH2PCy2)(η:η-C6H12)][BArF4] can be prepared by simple hydrogenation in a solid/gas single-crystal to single-crystal transformation of precursor alkene complexes. Solid-gas H/D exchange with D2 occurs at all C-H bonds in both alkane complexes, pointing to a variety of low energy fluxional processes that occur for the bound alkane ligands in the solid-state. These are probed by variable temperature solid-state nuclear magnetic resonance experiments and periodic density functional theory (DFT) calculations. These alkane σ-complexes undergo spontaneous acceptorless dehydrogenation at 298 K to reform the corresponding isobutene and cyclohexadiene complexes, by simple application of vacuum or Ar-flow to remove H2. These processes can be followed temporally, and modeled using classical chemical, or Johnson-Mehl-Avrami-Kologoromov, kinetics. When per-deuteration is coupled with dehydrogenation of cyclohexane to cyclohexadiene, this allows for two successive KIEs to be determined [kH/kD = 3.6(5) and 10.8(6)], showing that the rate-determining steps involve C-H activation. Periodic DFT calculations predict overall barriers of 20.6 and 24.4 kcal/mol for the two dehydrogenation steps, in good agreement with the values determined experimentally. The calculations also identify significant C-H bond elongation in both rate-limiting transition states and suggest that the large kH/kD for the second dehydrogenation results from a pre-equilibrium involving C-H oxidative cleavage and a subsequent rate-limiting ß-H transfer step.

Modulation of σ-Alkane Interactions in [Rh(L2)(alkane)]+ Solid-State Molecular Organometallic (SMOM) Systems by Variation of the Chelating Phosphine and Alkane: Access to η2,η2-σ-Alkane Rh(I), η1-σ-Alkane Rh(III) Complexes, and Alkane Encapsulation.

Solid/gas single-crystal to single-crystal (SC-SC) hydrogenation of appropriate diene precursors forms the corresponding σ-alkane complexes [Rh(Cy2P(CH2) nPCy2)(L)][BArF4] ( n = 3, 4) and [ RhH(Cy2P(CH2)2( CH)(CH2)2PCy2)(L)][BArF4] ( n = 5, L = norbornane, NBA; cyclooctane, COA). Their structures, as determined by single-crystal X-ray diffraction, have cations exhibiting Rh···H-C σ-interactions which are modulated by both the chelating ligand and the identity of the alkane, while all sit in an octahedral anion microenvironment. These range from chelating η2,η2 Rh···H-C (e.g., [Rh(Cy2P(CH2) nPCy2)(η2η2-NBA)][BArF4], n = 3 and 4), through to more weakly bound η1 Rh···H-C in which C-H activation of the chelate backbone has also occurred (e.g., [ RhH(Cy2P(CH2)2( CH)(CH2)2PCy2)(η1-COA)][BArF4]) and ultimately to systems where the alkane is not ligated with the metal center, but sits encapsulated in the supporting anion microenvironment, [Rh(Cy2P(CH2)3PCy2)][COA⊂BArF4], in which the metal center instead forms two intramolecular agostic η1 Rh···H-C interactions with the phosphine cyclohexyl groups. CH2Cl2 adducts formed by displacement of the η1-alkanes in solution ( n = 5; L = NBA, COA), [ RhH(Cy2P(CH2)2( CH)(CH2)2PCy2)(κ1-ClCH2Cl)][BArF4], are characterized crystallographically. Analyses via periodic DFT, QTAIM, NBO, and NCI calculations, alongside variable temperature solid-state NMR spectroscopy, provide snapshots marking the onset of Rh···alkane interactions along a C-H activation trajectory. These are negligible in [Rh(Cy2P(CH2)3PCy2)][COA⊂BArF4]; in [ RhH(Cy2P(CH2)2( CH)(CH2)2PCy2)(η1-COA)][BArF4], σC-H → Rh σ-donation is supported by Rh → σ*C-H "pregostic" donation, and in [Rh(Cy2P(CH2) nPCy2)(η2η2-NBA)][BArF4] ( n = 2-4), σ-donation dominates, supported by classical Rh(dπ) → σ*C-H π-back-donation. Dispersive interactions with the [BArF4]- anions and Cy substituents further stabilize the alkanes within the binding pocket.

Tolerant to air σ-alkane complexes by surface modification of single crystalline solid-state molecular organometallics using vapour-phase cationic polymerisation: SMOM@polymer.

Vapour-phase surface-initiated cationic polymerisation of ethylvinylether occurs at single-crystals of the σ-alkane complex [Rh(Cy2PCH2CH2PCy2)(NBA)][BArF4]. This new surface interface makes these normally very air sensitive materials tolerant to air, while also allowing for onward single-crystal to single-crystal reactivity at metal sites within the lattice.