Airborne occupational exposures associated with pulmonary sarcoidosis: a systematic review and meta-analysis.

The aetiology and pathophysiology of sarcoidosis is ill defined-current hypotheses centre on complex genetic-immune-environmental interactions in an individual, triggering a granulomatous process. The aim of this systematic review is to define and describe which airborne occupational exposures (aOE) are associated with and precede a diagnosis of pulmonary sarcoidosis. The methodology adopted for the purpose was systematic review and meta-analyses of ORs for specified aOE associated with pulmonary sarcoidosis (DerSimonian Laird random effects model (pooled log estimate of OR)). Standard search terms and dual review at each stage occurred. A compendium of aOE associated with pulmonary sarcoidosis was assembled, including mineralogical studies of sarcoidosis granulomas. N=81 aOE were associated with pulmonary sarcoidosis across all study designs. Occupational silica, pesticide and mould or mildew exposures were associated with increased odds of pulmonary sarcoidosis. Occupational nickel and aluminium exposure were associated with a non-statistically significant increase in the odds of pulmonary sarcoidosis. Silica exposure associated with pulmonary sarcoidosis was reported most frequently in the compendium (n=33 studies) and was the most common mineral identified in granulomas. It was concluded that aOE to silica, pesticides and mould or mildew are associated with increased odds of pulmonary sarcoidosis. Equipoise remains concerning the association and relationship of metal dusts with pulmonary sarcoidosis.

Identification of late asthmatic reactions following specific inhalation challenge.

Specific inhalation challenge (SIC) is the reference standard for the diagnosis of occupational asthma. Current guidelines for identifying late asthmatic reactions are not evidence based. OBJECTIVES: To identify the fall in forced expiratory volume in 1 s (FEV1) required following SIC to exceed the 95% CI for control days, factors which influence this and to show how this can be applied in routine practice using a statistical method based on the pooled SD for FEV1 from three control days. METHODS: Fifty consecutive workers being investigated for occupational asthma were asked to self-record FEV1 hourly for 2 days before admission for SIC. These 2 days were added to the in-hospital control day to calculate the pooled SD and 95% CI. RESULTS: 45/50 kept adequate measurements. The pooled 95% CI was 385 mL (SD 126), or 14.2% (SD 6.2) of the baseline FEV1, but was unrelated to the baseline FEV1 (r=0.06, p=0.68), or gender, atopy, smoking, non-specific reactivity or treatment before or during SIC. Thirteen workers had a late asthmatic reaction with ≥2 consecutive FEV1 measurements below the 95% CI for pooled control days, 4/13 had <15% and 9/13 >15% late fall from baseline. The four workers with ≥2 values below the 95% CI all had independent evidence of occupational asthma. CONCLUSION: The pooled SD method for defining late asthmatic reactions has scientific validity, accounts for interpatient spirometric variability and diurnal variation and can identify clinically relevant late asthmatic reactions from smaller exposures. For baseline FEV1 <2.5 L, a 15% fall is within the 95% CI.

Hospital Attendances and Acute Admissions Preceding a Diagnosis of Occupational Asthma.

PURPOSE: Occupational exposures are a common cause of adult-onset asthma; rapid removal from exposure to the causative agent offers the best chance of a good outcome. Despite this, occupational asthma (OA) is widely underdiagnosed. We aimed to see whether chances of diagnosis were missed during acute hospital attendances in the period between symptom onset and the diagnosis of OA. METHODS: Patients diagnosed with OA at the regional occupational lung disease service in Birmingham between 2007 and 2018 whose home address had a Birmingham postcode were included. Emergency department (ED) attendances and acute admission data were retrieved from acute hospitals in the Birmingham conurbation for the period between symptom onset and diagnosis. RESULTS: OA was diagnosed in 406 patients, 147 having a Birmingham postcode. Thirty-four percent (50/147) had acute hospital attendances to a Birmingham conurbation hospital preceding their diagnosis of OA, including 35 (24%) with respiratory illnesses, which resulted in referral for investigation of possible OA in 2/35. The median delay between symptom onset and diagnosis of OA was 30 months (IQR = 13-60) and between first hospital attendance with respiratory illness and diagnosis 12 months (IQR = 12-48, range 3-96 months) CONCLUSIONS: The chance to reduce the delay in the diagnosis of OA was missed in 33/35 patients admitted or seen in ED with respiratory symptoms in the period between symptom onset and diagnosis of OA. The diagnosis of OA was delayed by a median of 12 months by failure to ask about employment and work relationship of symptoms.

Occupational asthma; the limited role of air-fed respiratory protective equipment.

BACKGROUND: Evidence-based reviews have found that evidence for the efficacy of respiratory protective equipment (RPE) in the management of occupational asthma (OA) is lacking. AIMS: To quantify the effectiveness of air-fed RPE in workers with sensitizer-induced OA exposed to metal-working fluid aerosols in a car engine and transmission manufacturing facility. METHODS: All workers from an outbreak of metal-working fluid-induced OA who had continuing peak expiratory flow (PEF) evidence of sensitizer-induced OA after steam cleaning and replacement of all metal-working fluid were included. Workers kept 2-hourly PEF measurements at home and work, before and after a strictly enforced programme of RPE with air-fed respirators with charcoal filters. The area-between-curve (ABC) score from the Oasys plotter was used to assess the effectiveness of the RPE. RESULTS: Twenty workers met the inclusion criteria. Records were kept for a mean of 24.6 day shifts and rest days before and 24.7 after the institution of RPE. The ABC score improved from 26.6 (SD 16.2) to 17.7 (SD 25.4) l/min/h (P > 0.05) post-RPE; however, work-related decline was <15 l/min/h in only 12 of 20 workers, despite increased asthma treatment in 5 workers. CONCLUSIONS: Serial PEF measurements assessed with the ABC score from the Oasys system allowed quantification of the effect of RPE in sensitized workers. The RPE reduced falls in PEF associated with work exposure, but this was rarely complete. This study suggests that RPE use cannot be relied on to replace source control in workers with OA, and that monitoring post-RPE introduction is needed.

Do laboratory challenge tests for occupational asthma represent what happens in the workplace?

Specific inhalation challenge (SIC) is the diagnostic reference standard for occupational asthma; however, a positive test cannot be considered truly significant unless it can be reproduced by usual work exposures. We have compared the timing and responses during SIC in hospital to Oasys analysis of serial peak expiratory flow (PEF) during usual work exposures.All workers with a positive SIC to occupational agents between 2006 and 2015 were asked to measure PEF every 2 h from waking to sleeping for 4 weeks during usual occupational exposures. Responses were compared between the laboratory challenge and the real-world exposures at work.All 53 workers with positive SIC were included. 49 out of 53 had records suitable for Oasys analysis, 14 required more than one attempt and all confirmed occupational work-related changes in PEF. Immediate SIC reactors and deterioration within the first 2 h of starting work were significantly correlated with early recovery, and late SIC reactors and a delayed start to workplace deterioration were significantly correlated with delayed recovery. Dual SIC reactions had features of immediate or late SIC reactions at work rather than dual reactions.The concordance of timings of reactions during SIC and at work provides further validation for the clinical significance of each test.

Sensitising effects of genetically modified enzymes used in flavour, fragrance, detergence and pharmaceutical production: cross-sectional study.

OBJECTIVES: The use of genetically engineered enzymes in the synthesis of flavourings, fragrances and other applications has increased tremendously. There is, however, a paucity of data on sensitisation and/or allergy to the finished products. We aimed to review the use of genetically modified enzymes and the enormous challenges in human biomonitoring studies with suitable assays of specific IgE to a variety of modified enzyme proteins in occupational settings and measure specific IgE to modified enzymes in exposed workers. METHODS: Specific IgE antibodies against workplace-specific individual enzymes were measured by the specific fluorescence enzyme-labelled immunoassay in 813 exposed workers seen in cross-sectional surveys. RESULTS: Twenty-three per cent of all exposed workers showed type I sensitisation with IgE antibodies directed against respective workplace-specific enzymes. The highest sensitisation frequencies observed were for workers exposed enzymes derived from α-amylase (44%), followed by stainzyme (41%), pancreatinin (35%), savinase (31%), papain (31%), ovozyme (28%), phytase (16%), trypsin (15%) and lipase (4%). The highest individual antibody levels (up to 110 kU/L) were detected in workers exposed to phytase, xylanase and glucanase. In a subgroup comprising 134 workers, detailed clinical diagnostics confirmed work-related symptoms. There was a strong correlation (r=0.75, p<0.0001) between the symptoms and antibody levels. Workers with work-related respiratory symptoms showed a higher prevalence for the presence of specific IgE antibodies against workplace-specific enzymes than asymptomatic exposed workers (likelihood ratio 2.32, sensitivity 0.92, specificity 0.6). CONCLUSIONS: Our data confirm the previous findings showing that genetically engineered enzymes are potent allergens eliciting immediate-type sensitisation. Owing to lack of commercial diagnostic tests, few of those exposed receive regular surveillance including biomonitoring with relevant specific IgE assays.

Hypersensitivity Pneumonitis Due to Metalworking Fluid Aerosols.

PURPOSE OF REVIEW: This review summarises the clinical knowledge of hypersensitivity pneumonitis in workers exposed to aerosols of metalworking fluid, reviewing published outbreaks and clinical cases. RECENT FINDINGS: Metalworking fluid exposure has become the commonest recognised cause of occupational hypersensitivity pneumonitis, having been rare before 2000. There are many possible agents in the metalworking fluid which may be the cause of disease including bacteria, mycobacteria, fungae, biocides, emulsifiers, reodorants and dissolved chrome and cobalt. Causes are likely to be different in different outbreaks. Mycobacteria growing in the metalworking fluid have generated immune responses in some workers, but their role in disease causation is not yet established. Many outbreaks have been identified in large workplaces using common sumps. It is not possible to prevent microbial contamination of metalworking fluids in use. Disease prevention should focus on stopping inhalation of aerosols, particularly by re-engineering to remove recirculation.

Specific inhalation challenge in the diagnosis of occupational asthma: consensus statement.

This consensus statement provides practical recommendations for specific inhalation challenge (SIC) in the diagnosis of occupational asthma. They are derived from a systematic literature search, a census of active European centres, a Delphi conference and expert consensus. This article details each step of a SIC, including safety requirements, techniques for delivering agents, and methods for assessing and interpreting bronchial responses. The limitations of the procedure are also discussed. Testing should only be carried out in hospitals where physicians and healthcare professionals have appropriate expertise. Tests should always include a control challenge, a gradual increase of exposure to the suspected agent, and close monitoring of the patient during the challenge and for at least 6 h afterwards. In expert centres, excessive reactions provoked by SIC are rare. A positive response is defined by a fall in forced expiratory volume in 1 s ≥ 15% from baseline. Equivocal reactions can sometimes be clarified by finding changes in nonspecific bronchial responsiveness, sputum eosinophils or exhaled nitric oxide. The sensitivity and specificity of SIC are high but not easily quantified, as the method is usually used as the reference standard for the diagnosis of occupational asthma.

Hypersensitivity pneumonitis in workers exposed to metalworking fluids.

BACKGROUND: This study used data from a large UK outbreak investigation, to develop and validate a new case definition for hypersensitivity pneumonitis due to metalworking fluid exposure (MWF-HP). METHODS: The clinical data from all workers with suspected MWF-HP were reviewed by an experienced panel of clinicians. A new MWF-HP Score was then developed to match the "gold standard" clinical opinion as closely as possible, using standard diagnostic criteria that were relatively weighted by their positive predictive value. RESULTS: The new case definition was reproducible, and agreed with expert panel opinion in 30/37 cases. This level of agreement was greater than with any of the three previously utilized case definitions (agreement in 16-24 cases). Where it was possible to calculate, the MWF-HP Score also performed well when applied to 50 unrelated MWF-HP cases. CONCLUSIONS: The MWF-HP Score offers a new case definition for use in future outbreaks.

Obliterative bronchiolitis in fibreglass workers: a new occupational disease?

RATIONALE AND OBJECTIVES: Obliterative bronchiolitis (OB) is a rare disease with a small number of established occupational aetiologies. We describe a case series of severe OB in workers making glass-reinforced plastics. METHODS: Workplace exposures were the likely cause after the independent diagnosis of OB in two workers laying up the fibreglass hulls of yachts; the second worker took over the job of the first after he left following a lung transplant. Presentation of these two cases at international meetings led to others identifying similar workers. MAIN RESULTS: We identified six workers with good evidence of OB. All were involved in preparing fibreglass with styrene resins, five as boat builders laying up fibreglass hulls and one during cooling-tower fabrication. The disease came on rapidly without unusual acute exposures. Two patients had lung transplants, while another died while waiting for one. Histology confirmed OB in the four with biopsies/post-mortem examinations or explanted lungs. CONCLUSIONS: A rare, potentially fatal disease occurring in six workers laying up fibreglass with styrene resins from five different worksites suggests that work exposures were the cause of their OB. The precise agent responsible awaits identification.

Pulmonary function test and computed tomography features during follow-up after SARS, MERS and COVID-19: a systematic review and meta-analysis.

Background: The COVID-19 pandemic follows severe acute respiratory syndrome (SARS) and Middle East respiratory syndrome (MERS) coronavirus epidemics. Some survivors of COVID-19 infection experience persistent respiratory symptoms, yet their cause and natural history remain unclear. Follow-up after SARS and MERS may provide a model for predicting the long-term pulmonary consequences of COVID-19. Methods: This systematic review and meta-analysis aims to describe and compare the longitudinal pulmonary function test (PFT) and computed tomography (CT) features of patients recovering from SARS, MERS and COVID-19. Meta-analysis of PFT parameters (DerSimonian and Laird random-effects model) and proportion of CT features (Freeman-Tukey transformation random-effects model) were performed. Findings: Persistent reduction in the diffusing capacity for carbon monoxide following SARS and COVID-19 infection is seen at 6 months follow-up, and 12 months after MERS. Other PFT parameters recover in this time. 6 months after SARS and COVID-19, ground-glass opacity, linear opacities and reticulation persist in over 30% of patients; honeycombing and traction dilatation are reported less often. Severe/critical COVID-19 infection leads to greater CT and PFT abnormality compared to mild/moderate infection. Interpretation: Persistent diffusion defects suggestive of parenchymal lung injury occur after SARS, MERS and COVID-19 infection, but improve over time. After COVID-19 infection, CT features are suggestive of persistent parenchymal lung injury, in keeping with a post-COVID-19 interstitial lung syndrome. It is yet to be determined if this is a regressive or progressive disease.

Do long periods off work in peak expiratory flow monitoring improve the sensitivity of occupational asthma diagnosis?

INTRODUCTION: Serial peak expiratory flow (PEF) monitoring is a useful confirmatory test for occupational asthma diagnosis. As weekends off work may not be long enough for PEF records to recover, this study investigated whether including longer periods off work in PEF monitoring improves the sensitivity of occupational asthma diagnosis. METHODS: Serial PEF measurements from workers with occupational asthma and from workers not at work during their PEF record, containing minimum data amounts and at least one rest period with > or = 7 consecutive days off work, were analysed. Diagnostic sensitivity and specificity of the area between the curves (ABC) score from waking time and Oasys score for occupational asthma were calculated for each record by including only consecutive rest days 1-3 in any rest period, including only consecutive rest days from day 4 onwards in any rest period or including all available data. RESULTS: Analysing all available off work data (including periods away from work of > or = 7 days) increased the mean ABC score by 17% from 35.1 to 41.0 l/min/h (meaning a larger difference between rest and work day PEF values) (p=0.331) and the Oasys score from 3.2 to 3.3 (p=0.588). It improved the sensitivity of the ABC score for an occupational asthma diagnosis from 73% to 80% while maintaining specificity at 96%. The effect on the Oasys score using discriminant analysis was small (sensitivity changed from 85% to 88%). CONCLUSIONS: Sensitivity of PEF monitoring using the ABC score for the diagnosis of occupational asthma can be improved by having a longer period off work.

Serial lung function variability using four portable logging meters.

OBJECTIVE: Portable lung function logging meters that allow measurement of peak expiratory flow (PEF) and forced expiratory volume in 1 second (FEV(1)) are useful for the diagnosis and exclusion of asthma. The aim of this study was to investigate the within and between-session variability of PEF and FEV(1) for four logging meters and to determine the sensitivity of meters to detect FEV(1) and PEF diurnal changes. METHODS: Thirteen assessors (all hospital staff members) were asked to record 1 week of 2-hour PEF and FEV(1) measurements using four portable lung function meters. Within-session variability of PEF and FEV(1) were compared for each meter using a coefficient of variation (COV). Between-session variability was quantified using parameter estimates from a cosinor analysis which modeled diurnal change for both lung function measures and also allowed for variation between days for individual sessions. RESULTS: The mean within-session COV for FEV(1) was consistently lower than that for PEF (p < 0.001). PEF showed a higher but not significantly different (p = 0.068) sensitivity for detecting diurnal variation than FEV(1). PEF was also slightly more variable between days, but not significantly different than FEV(1) (p = 0.409). PEF and FEV(1) diurnal variability did not differ between the 4 meters (p = 0.154 and 0.882 respectively), but within-session FEV(1) COV differed between meters (p = 0.009). CONCLUSION: PEF was marginally more sensitive to within-day variability than FEV(1) but was less repeatable. Overall, differences between the 4 meters were small, suggesting that all meters are clinically useful.

Peak expiratory flow analysis in workers exposed to detergent enzymes.

AIMS: To study serial peak expiratory flow (PEF) responses in a group of symptomatic detergent enzyme-exposed workers. METHODS: Workers were recruited from a biological detergent formulating and packaging company. Those with occupational asthma symptoms and/or specific IgE to a detergent enzyme were asked to complete 2 hourly PEF measurements for 4 weeks. Outputs from the Oasys program (Oasys score, rest-work score and rest-work difference in diurnal variation) assessed PEF response. These were then related to the levels of sensitization and current occupational exposure to detergent enzymes. RESULTS: In all, 67/72 workers returned PEF records; 97% were able to return a record with at least four readings per day and 87% at least 3 weeks in length. Of total, 79% (n = 27) of those with a final diagnosis of occupational asthma had peak flow records confirming the disease using Oasys. PEF response was similar in those with high, medium and low levels of exposures and those with negative, low-moderate and high specific IgE levels. CONCLUSIONS: The Oasys program is a sensitive tool for the diagnosis of detergent enzyme occupational asthma, but the levels of exposure and specific IgE sensitization to enzymes do not affect the magnitude of PEF response in symptomatic workers.