RESUMO
Respiratory pathogens pose significant challenges to public health, demanding efficient diagnostic methods. This study presents an integrated microfluidic chip for the simultaneous detection of multiple respiratory pathogens. The chip integrates magnetic bead-based nucleic acid extraction and purification, acoustic streaming-driven mixing, liquid equalization, and multiplex PCR amplification with in situ fluorescence detection. Nucleic acid extraction takes only 12 min, yielding results comparable to commercial kits. Efficient mixing of magnetic beads is achieved through a combination of designed micropillars and bubble-trapping array structures. The micropillars maintain the aqueous phase in the mixing chamber, while the bubble-trapping arrays enable stable formation of bubbles, serving as a micromixer under the acoustic field. To prevent cross-contamination, an oil-encapsulated water droplet system is incorporated throughout nucleic acid extraction and PCR amplification. This assay displays remarkable multiplex analysis capability on a single chip, enabling the simultaneous detection of 12 common respiratory pathogens with a low detection limit of 10 copies/µL. Moreover, this method demonstrates excellent practical applicability in clinical nasal samples. Compared to many microfluidic chip-based molecular biology methods, the assay exhibits comparable or superior multipathogen analysis capability, sensitivity, and speed, completing the sample-to-answer process in approximately 70 min. This integrated microfluidic device offers a promising multiplex molecular diagnosis platform for on-site simultaneous detection of multiple pathogens.
RESUMO
Rapid antimicrobial susceptibility testing (AST) with the ability of bacterial identification is urgently needed for evidence-based antibiotic prescription. Herein, we propose an enzymatic AST (enzyAST) that employs ß-d-glucuronidase as a biomarker to identify pathogens and profile phenotypic susceptibilities simultaneously. EnzyAST enables to offer binary AST results within 30 min, much faster than standard methods (>16 h). The general applicability of enzyAST was verified by testing the susceptibility of two Escherichia coli strains to three antibiotics with different action mechanisms. The pilot study also shows that the minimal inhibitory concentrations can be determined by enzyAST with the statistical analysis of enzymatic activity of the bacteria population exposed to varying antibiotic concentrations. With further development of multiple bacteria and sample treatment, enzyAST could be able to evaluate the susceptibility of pathogens in clinical samples directly to facilitate the evidence-based therapy.
Assuntos
Antibacterianos , Bactérias , Projetos Piloto , Antibacterianos/farmacologia , Testes de Sensibilidade Microbiana , Escherichia coliRESUMO
Diagnosis of cancer by biomarkers plays an important role in human health and life. However, current laboratory techniques for detecting cancer biomarkers still require laborious and time-consuming operation by skilled operators and associated laboratory instruments. This work presents a colorimetric biosensor for the rapid and sensitive detection of carcinoembryonic antigen (CEA) based on an automated immunomagnetic separation platform and a droplet array microfluidic chip with the aid of an image analysis system. Immunomagnetic nanoparticles (MNPs) were used to capture CEA in the samples. CEA-detecting antibodies and horseradish peroxidase (HRP) were modified on polystyrene microspheres (PS), catalysing hydrogen peroxide and 3,3',5,5'-tetramethylbenzidine (TMB) as signal outputs. Color reaction data were analyzed to establish a CEA concentration standard curve. The movement of MNPs between droplets in the microfluidic chip is achieved using an automatically programmable magnetic control system. This colorimetric biosensor has been used for the simultaneous detection of six CEA samples ranging from 100 pg mL-1 to 100 ng mL-1 with a detection limit of 14.347 pg mL-1 in 10 min, following the linear equation: y = -4.773 ln(x) + 156.26 with a correlation of R2 = 0.9924, and the entire workflow can be completed within 80 minutes. The microfluidic immunosensor designed in this paper has the advantages of low cost, automation, low sample consumption, high throughput, and promising applications in biochemistry.
Assuntos
Técnicas Biossensoriais , Nanopartículas Metálicas , Humanos , Antígeno Carcinoembrionário/análise , Separação Imunomagnética/métodos , Microfluídica , Imunoensaio/métodos , Técnicas Biossensoriais/métodos , Anticorpos Monoclonais , Limite de Detecção , OuroRESUMO
The urinary tract infections by antibiotic-resistant bacteria have been a serious public health problem and increase the healthcare costs. The conventional technologies of diagnosis and antimicrobial susceptibility testing (AST) relying on multiple culture-based assays are time-consuming and labor-intensive and thus compel the empirical antimicrobial therapies to be prescribed, fueling the prevalence of antimicrobial resistance. Herein, we propose an all-in-one Escherichia coli viability assay in an enclosed 3D microwell array chip, termed digital ß-d-glucuronidase (GUS)-AST assay. It employs GUS, a specific metabolism-related enzyme, to convert the presence of E. coli into bright fluorescence. The random distribution of single bacteria in microwell array enables to quantify the E. coli concentrations by counting the positive microwells. We incorporate the most probable number with digital quantification to lower the limit of detection and expand the dynamic range to 7 orders. The digital GUS-AST assay is able to indicate the potency of antibiotics and determine the minimum inhibitory concentrations. A streamlined procedure of urine removal, bacterial separation, and digital GUS-AST is established to perform the direct analysis of bacteria population in urine. The sample-to-result workflow can be finished in 4.5 h with a limit of detection of 39 CFU/mL. With further development for additional pathogens and multiple antibiotic conditions, the digital GUS-AST assay could help physicians to prescribe timely targeted therapies for better patient outcomes and the minimum emergence of resistant bacteria.
Assuntos
Anti-Infecciosos , Infecções por Escherichia coli , Infecções Urinárias , Humanos , Escherichia coli , Antibacterianos/farmacologia , Infecções Urinárias/diagnóstico , Infecções Urinárias/tratamento farmacológico , Bactérias , Testes de Sensibilidade Microbiana , Glucuronidase , Infecções por Escherichia coli/diagnóstico , Infecções por Escherichia coli/tratamento farmacológico , Infecções por Escherichia coli/microbiologiaRESUMO
An enzyme assay based method in a microfluidic slipchip was proposed for the rapid and label-free detection of E. coli. The specific target analyte of E. coli was ß-d-glucuronidase (GUS) which could catalyze the substrate 6-chloro-4-methyl-umbelliferyl-ß-d-glucuronide (6-CMUG) to release the fluorescent molecule 6-chloro-4-methyl-umbelliferyl (6-CMU). E. coli culture, lysis and enzymatic reaction steps could be conducted in a microfluidic slipchip without any pumps and valves, which was tailored for fluorescence detection using a commercial plate reader, to achieve a rapid E. coli test. A mixture of the culture broth, enzyme inducer and E. coli was injected into the chambers on the top layer. A mixture of the substrate and lysis solution was injected into the chambers on the bottom layer. Then, the slipchip was slid to make each chamber independent. E. coli was cultured in the chamber in the LB broth for 2.5 h. After that, the slipchip was slid again to introduce the lysis solution into the culture solution for GUS release and enzyme reaction, and then incubated in the plate reader at 42 °C for another 2.5 h. During incubation, the fluorescence intensity of each chamber was recorded. This proposed label-free method can directly detect E. coli with a low concentration of 8 CFU per chamber within 5 h, thus showing great potential in on-site E. coli detection.
Assuntos
Escherichia coli , Microfluídica , Bioensaio , Ensaios Enzimáticos , GlucuronidaseRESUMO
A colorimetric immunosensor was developed for the determination of Salmonella Typhimurium using rotating magnetic separation, gold nanorod (GNR) indication, and click chemistry amplification. The target bacteria were first separated from large-volume sample using a rotating magnetic field and a small amount (50 µg) of immunomagnetic nanoparticles (MNPs), resulting in the forming of magnetic bacteria. Then, the magnetic bacteria were conjugated with catalase (CAT)-labeled antibodies, which were synthesized using trans-cyclooctene/1,2,4,5-tetrazine click chemistry reaction, resulting in the forming of enzymatic bacteria. Then the CATs on the enzymatic bacteria were used to decompose an excessive amount of hydrogen peroxide (H2O2), the remaining H2O2 was mixed with horseradish peroxidase to etch the GNRs, resulting in color change and absorbance peak shift of the GNRs. Finally, the peak shift was measured and analyzed for the quantitative determination of target bacteria. This immunosensor was able to detect Salmonella Typhimurium with a linear range of 101-105 CFU mL-1 in 3 h with a low detection limit of 35 CFU mL-1. The mean recovery for Salmonella Typhimurium in spiked chicken samples was 109%. Graphical abstractSchematic representation of a colorimetric immunosensor for the determination of Salmonella Typhimurium as low as 35 CFU mL-1 using rotating magnetic separation of Salmonella from a large-volume sample, click chemistry reaction of catalase with antibodies for signal amplification, and HRP-mediated gold nanorod etching for result indication.
Assuntos
Técnicas Biossensoriais , Colorimetria , Técnicas Eletroquímicas , Imunoensaio , Separação Imunomagnética , Salmonella typhimurium/isolamento & purificação , Química Click , Ouro/química , Nanotubos/químicaRESUMO
Salmonella is a main cause of foodborne illnesses and rapid screening of Salmonella is the key to prevent Salmonella outbreaks, however available detection methods either require a long time, or need complex pretreatment, or have low sensitivity. In this study, a microfluidic biosensor was developed for Salmonella detection using viscoelastic inertial microfluidics for separating magnetic bacteria from unbound magnetic nanoparticles (MNPs) and enzyme catalytic colorimetry for amplifying biological signals. The polyclonal antibodies and horseradish peroxidase (HRP) modified MNPs were first used to specifically capture Salmonella to form magnetic HRP-bacteria. Both magnetic HRP-bacteria and unbound MNPs were magnetically separated from background and resuspended in viscoelastic polyvinylpyrrolidone solution as sample flow. When sample flow was injected with polyvinylpyrrolidone sheath flow into a T-shaped microchannel, larger-sized magnetic HRP-bacteria could penetrate the sample flow, however smaller-sized MNPs remained in the sample flow due to weaker inertial lift force and elastic lift force, resulting in continuous-flow separation of magnetic HRP-bacteria. Finally, magnetic HRP-bacteria were collected and concentrated to catalyze tetramethyl benzidine, and absorbance was measured to determine the bacteria. This biosensor was able to detect Salmonella as low as 30 CFU/mL in 1 h and featured the advantages of shorter time due to a one-step immunoreaction, easier extension due to only one antibody and one label, and lower cost due to less expensive materials.
Assuntos
Técnicas Biossensoriais , Microfluídica , Salmonella typhimurium/isolamento & purificação , Anticorpos , Colorimetria , Peroxidase do Rábano Silvestre , Nanopartículas Magnéticas de Óxido de FerroRESUMO
A disposable visual microfluidic immunosensor is described for the determination of foodborne pathogens using immunomagnetic separation, enzymatic catalysis and distance indication. Specifically, a sensor was designed to detect Salmonella typhimurium as a model pathogen. Magnetic nanoparticles (MNPs) were modified with the anti-Salmonella monoclonal antibodies and then used to enrich S. typhimurium from the sample. This is followed by conjugation to polystyrene microspheres modified with anti-Salmonella polyclonal antibodies and catalase to form the MNP-bacteria-polystyrene-catalase sandwich. The catalase on the complexes catalyzes the decomposition of hydrogen peroxide to produce oxygen after passing a micromixer. The generated oxygen gas increases the pressure in the chip and pushes the indicating red dye solution to travel along the channel towards the unsealed outlet. The travel distance of the red dye can be visually read and related to the amount of S. typhimurium using the calibration scale. The sensor can detect as low as 150 CFU·mL-1 within 2 h. Graphical abstractSchematic representation of the distance-based microfluidic immunosensor for visual detection of foodborne bacteria using immunomagnetic nanoparticles for bacteria separation, catalase for decomposition of hydrogen peroxide to form oxygen which causes a pressure increase, and red dyed particles movement for distance indication.
Assuntos
Contaminação de Alimentos/análise , Imunoensaio/métodos , Técnicas Analíticas Microfluídicas/métodos , Salmonella typhimurium/isolamento & purificação , Animais , Anticorpos Imobilizados/imunologia , Anticorpos Monoclonais/imunologia , Catalase/química , Galinhas/microbiologia , Peróxido de Hidrogênio/química , Separação Imunomagnética/métodos , Dispositivos Lab-On-A-Chip , Limite de Detecção , Nanopartículas de Magnetita/química , Técnicas Analíticas Microfluídicas/instrumentação , Microesferas , Poliestirenos/química , Salmonella typhimurium/imunologiaRESUMO
In this study, a rapid and sensitive method for detection of Escherichia coli O157:H7 using the coaxial channel-based DNA extraction and the microfluidic PCR was proposed and verified. The magnetic silica beads were first pumped into the coaxial channel, which was captured in the coaxial channel more uniformly by applying the multiring high-gradient magnetic field. After the E. coli O157:H7 cells were lysed with the lysis buffer to release the DNA, the improved coaxial channel was used to efficiently extract the DNA, followed by washing with ethanol to remove the residual proteins and eluting with a small volume of deionized water to obtain the purified and concentrated DNA. Finally, the obtained DNA was amplified and determined using the microfluidic PCR. This proposed bacteria detection method was able to detect E. coli O157:H7 as low as 12 cfu/mL when the large volume (10 mL) of bacterial sample was used, and the recovery of E. coli O157:H7 in the spiked milk samples ranged from 97.4 to 100.6%. This proposed bacteria detection method has shown great potential to detect lower concentration of E. coli O157:H7 from larger volumes of sample.
Assuntos
Escherichia coli O157/isolamento & purificação , Microfluídica/métodos , Leite/microbiologia , Animais , DNA Bacteriano/isolamento & purificação , Escherichia coli O157/genética , Feminino , Separação Imunomagnética , Reação em Cadeia da Polimerase/métodosRESUMO
BACKGROUND: The identification and quantification of viable Escherichia coli (E. coli) are important in multiple fields including the development of antimicrobial materials, water quality, food safety and infections diagnosis. However, the standard culture-based methods of viable E. coli detection suffer from long detection times (24 h) and complex operation, leaving the unmet requirement for fast assessing the efficiency of antimicrobial materials, early alerting the contamination of water and food, and immediately treatment of infections. RESULTS: We present a digital ß-d-glucuronidase (GUS) assay in a self-priming polydimethylsiloxane (PDMS) microfluidic chip for rapid E. coli identification and quantification. The GUS expression in viable bacteria was investigated to develop a fast GUS assay at the single-cell level. Single E. coli were stochastically discretized in picoliter chambers and identified by specific GUS activity. The digital GUS assay enabled identifying E. coli within 3 h and quantifying within 4 h for different E. coli subtypes. The specificity of our method was confirmed by using blended bacteria including E. coli, Bacillus, Shigella and Vibrio. We utilized digital GUS assay to enumerate viable E. coli after incubated with antibacterial materials for assessing the antibacterial efficiency. Moreover, the degassed chip can realize automatic sample distribution without external instruments. SIGNIFICANCE: The results demonstrated the functionality and practicability of digital GUS assay for single E. coli identification and quantification. With air-tight packaging, the developed chip has the potential for on-site E. coli analysis and could be deployed for diagnosis of E. coli infections, antimicrobial susceptibility testing, and warning the fecal pollution of water. Digital GUS assay provides a paradigm, examining the activity of metabolic enzyme, for detecting the viable bacteria other than E. coli.
Assuntos
Escherichia coli , Qualidade da Água , Escherichia coli/metabolismo , Microfluídica , Antibacterianos/farmacologia , Glucuronidase/metabolismoRESUMO
Okadaic acid (OA) is a marine biotoxin that accumulates in seafood and can cause diarrheic shellfish poisoning if consumed. Accordingly, many countries have established regulatory limits for the content of OA in shellfish. At present, methods used for the detection of marine toxins are time-consuming and labor-intensive. In order to realize rapid, simple, and accurate detection of OA, we developed a novel microfluidic immunosensor based on magnetic beads modified with a highly specific and sensitive monoclonal antibody (mAb) against OA that is used in conjunction with smartphone imaging to realize the rapid detection of OA in shellfish. The method achieves on-site detection results within 1 h with an IC50 value of 3.30 ng/mL for OA and a limit of detection (LOD) of 0.49 ng/mL. In addition, the analysis of real samples showed that the recoveries for spiked shellfish samples ranged from 84.91% to 95.18%, and the results were confirmed by indirect competitive enzyme-linked immunosorbent assay (icELISA), indicating that the method has good accuracy and precision. Furthermore, the results are reported in a specially designed smartphone app. The microfluidic immunosensor has the advantages of simple operation, rapid detection, and high sensitivity, providing a reliable technical solution for detecting OA residues in shellfish.
Assuntos
Técnicas Biossensoriais , Ácido Okadáico/análise , Microfluídica , Imunoensaio/métodos , Frutos do Mar/análise , Alimentos Marinhos/análise , Fenômenos MagnéticosRESUMO
Empirical antibiotic therapies are prescribed for treating uncomplicated urinary tract infections (UTIs) due to the long turnaround time of conventional antimicrobial susceptibility testing (AST), leading to the prevalence of multi-drug resistant pathogens. We present a ready-to-use 3D microwell array chip to directly conduct comprehensive AST of pathogenic agents in urine at the single-cell level. The developed device features a highly integrated 3D microwell array, offering a dynamic range from 102 to 107 CFU mL-1, and a capillary valve-based flow distributor for flow equidistribution in dispensing channels and uniform sample distribution. The chip with pre-loaded reagents and negative pressure inside only requires the user to initiate AST by loading samples (â¼3 s) and can work independently. We demonstrate an accessible sample-to-result workflow, including syringe filter-based bacteria separation and rapid single-cell AST on chip, which enables us to bypass the time-consuming bacteria isolation and pre-culture, speeding up the AST in â¼3 h from 2 days of conventional methods. Moreover, the bacterial concentration and AST with minimum inhibitory concentrations can be assessed simultaneously to provide comprehensive information on infections. With further development for multiple antibiotic conditions, the Dsc-AST assay could contribute to timely prescription of targeted drugs for better patient outcomes and mitigation of the threat of drug-resistant bacteria.
Assuntos
Escherichia coli , Infecções Urinárias , Humanos , Antibacterianos/farmacologia , Antibacterianos/uso terapêutico , Infecções Urinárias/microbiologia , Bactérias , Análise de Sequência com Séries de Oligonucleotídeos , Testes de Sensibilidade MicrobianaRESUMO
Traditional exercise training monitoring is based on invasive blood testing methods. As sweat can reveal abundant blood-related physiological information about health, wearable sweat sensors have received significant research attention and become increasingly popular in the field of exercise training monitoring. However, most of these sensors are used to measure physical indicators such as heart rate, blood pressure, respiration, etc., demanding a versatile sensor that can detect relevant biochemical indicators in body fluids. In this work, we proposed a wearable microfluidic sweat chip combined with smartphone image processing to realize non-invasive in situ analysis of epidermal sweat for sports practitioners. The polydimethylsiloxane (PDMS) based chip was modified with nonionic surfactants to ensure good hydrophilicity for the automatic collection of sweat. Besides, a simple, reliable, and low-cost paper-based sensor was prepared for high-performance sensing of glucose concentration and pH in sweat. Under optimized conditions, this proposed chip can detect glucose with low concentrations from 0.05 mM to 0.40 mM, with a pH range of 4.0 to 6.5 for human sweat. The ability of this microfluidic chip for human sweat analysis was demonstrated by dynamically tracking the changes in glucose concentration and pH in long-distance running subjects.
Assuntos
Técnicas Biossensoriais , Corrida , Dispositivos Eletrônicos Vestíveis , Humanos , Glucose/análise , Suor/química , Técnicas Biossensoriais/métodos , Microfluídica , Exercício Físico , Concentração de Íons de HidrogênioRESUMO
BACKGROUND: The empirical antibiotic therapies for bacterial infections cause the emergence and propagation of multi-drug resistant bacteria, which not only impair the effectiveness of existing antibiotics but also raise healthcare costs. To reduce the empirical treatments, rapid antimicrobial susceptibility testing (AST) of causative microorganisms in clinical samples should be conducted for prescribing evidence-based antibiotics. However, most of culture-based ASTs suffer from inoculum effect and lack differentiation of target pathogen and commensals, hampering their adoption for evidence-based antibiotic prescription. Therefore, rapid ASTs which can specifically determine pathogens' susceptibilities, regardless of the bacterial load in clinical samples, are in urgent need. RESULTS: We present a pathogen-specific and inoculum size-insensitive AST to achieve the reliable susceptibility determination on Escherichia coli (E. coli) in urine samples. The developed AST is featured with an 1 h sample-to-result workflow in a filter, termed on-filter AST. The AST results can be obtained by using an inducible enzymatic assay to in-situ measure the cell response of E. coli collected from urine after 20 min of antibiotic exposure. The calculated detection limit of our AST (1.95 × 104 CFU/mL) is much lower than the diagnosis threshold of urinary tract infections. The specific expression of the inducible enzyme enables on-filter AST to correctly profile the susceptibilities of target pathogen to multi-type antibiotics without the interference from commensals. We performed the on-filter AST on 1 mL urine samples with bacterial loads varying from 105 CFU/mL to 107 CFU/mL and compared the results to that of standard method, demonstrating its insensitivity to inoculum size. SIGNIFICANCE: The developed AST is demonstrated to be of high sensitivity, specificity, and insensitive to inoculum size. With further developments for additional bacteria and clinical validation, on-filter AST is promising as a rapid and reliable surrogate of culture-based AST to promote the evidence-based prescription at the first visit and minimize the emergency of new multi-drug resistant microorganisms.
Assuntos
Antibacterianos , Infecções Urinárias , Humanos , Antibacterianos/farmacologia , Escherichia coli , Infecções Urinárias/diagnóstico , Infecções Urinárias/tratamento farmacológico , Bactérias , Testes de Sensibilidade MicrobianaRESUMO
Magnetic beads manipulation in microfluidic chips is a promising research field for biological application, especially in the detection of biological targets. In this review, we intend to present a thorough and in-depth overview of recent magnetic beads manipulation in microfluidic chips and its biological application. First, we introduce the mechanism of magnetic manipulation in microfluidic chip, including force analysis, particle properties, and surface modification. Then, we compare some existing methods of magnetic manipulation in microfluidic chip and list their biological application. Besides, the suggestions and outlook for future developments in the magnetic manipulation system are also discussed and summarized.
RESUMO
Obesity is one of the foremost public health concerns. Human pancreatic lipase (hPL), a crucial digestive enzyme responsible for the digestion of dietary lipids in humans, has been validated as an important therapeutic target for preventing and treating obesity. The serial dilution technique is commonly used to generate solutions with different concentrations and can be easily modified for drug screening. Conventional serial gradient dilution is often performed with tedious multiple manual pipetting steps, where it is difficult to precisely control fluidic volumes at low microliter levels. Herein, we presented a microfluidic SlipChip that enabled formation and manipulation of serial dilution array in an instrument-free manner. With simple slipping steps, the compound solution could be diluted to seven gradients with the dilution ratio of 1:1 and co-incubated with the enzyme (hPL)-substrate system for screening the anti-hPL potentials. To ensure complete mixing of solution and diluent during continuous dilution, we established a numerical simulation model and conducted an ink mixing experiment to determine the mixing time. Furthermore, we also demonstrated the serial dilution ability of the proposed SlipChip using standard fluorescent dye. As a proof of concept, we tested this microfluidic SlipChip using one marketed anti-obesity drug (Orlistat) and two natural products (1,2,3,4,6-penta-O-galloyl-ß-D-glucopyranose (PGG) and sciadopitysin) with anti-hPL potentials. The IC50 values of these agents were calculated as 11.69 nM, 8.22 nM and 0.80 µM, for Orlistat, PGG and sciadopitysin, respectively, which were consistent with the results obtained by conventional biochemical assay.
Assuntos
Lipase , Microfluídica , Humanos , Orlistate , Proteínas , Obesidade , Técnicas de Diluição do IndicadorRESUMO
Foodborne pathogenic bacteria have become a worldwide threat to human health, and rapid and sensitive bacterial detection methods are urgently needed. In this study, a facile microfluidic chip was developed and combined with recombinase-aided amplification (RAA) for rapid and sensitive detection of Salmonella typhimurium using a non-contact eddy heater for dynamic lysis of bacterial cells and a 3D-printed fan-shaped active mixer for continuous-flow mixing. First, the bacterial sample was injected into the chip to flow through the spiral channel coiling around an iron rod under an alternating electromagnetic field, resulting in the dynamic lysis of bacterial cells by this non-contact eddy heater to release their nucleic acids. After cooling to ~75 °C, these nucleic acids were continuous-flow mixed with magnetic silica beads using the fan-shaped mixer and captured in the separation chamber using a magnet. Finally, the captured nucleic acids were eluted by the eluent from the beads to flow into the detection chamber, followed by RAA detection of nucleic acids to determine the bacterial amount. Under the optimal conditions, this microfluidic chip was able to quantitatively detect Salmonella typhimurium from 1.1 × 102 to 1.1 × 105 CFU/mL in 40 min with a detection limit of 89 CFU/mL and might be prospective to offer a simple, low-cost, fast and specific bacterial detection technique for ensuring food safety.
Assuntos
Microfluídica , Técnicas de Amplificação de Ácido Nucleico , Recombinases , Salmonella typhimurium , Ferro , Microfluídica/instrumentação , Técnicas de Amplificação de Ácido Nucleico/instrumentação , Técnicas de Amplificação de Ácido Nucleico/métodos , Ácidos Nucleicos , Estudos Prospectivos , Salmonella typhimurium/isolamento & purificação , Dióxido de SilícioRESUMO
Rapid and sensitive Escherichia coli (E. coli) detection is important in determining environmental contamination, food contamination, as well as bacterial infection. Conventional methods based on bacterial culture suffer from long testing time (24 h), whereas novel nucleic acid-based and immunolabelling approaches are hindered by complicated operation, the need of complex and costly equipment, and the lack of differentiation of live and dead bacteria. Herein, we propose a chemiluminescence digital microwell array chip based on the hydrolysis of 6-Chloro-4-methylumbelliferyl-ß-D-glucuronide by the ß-D-glucuronidase in E. coli to achieve fast single bacterial fluorescence detection. Taking the advantage of the picoliter microwells, single bacteria are digitally encapsulated in these microwells, thus the accurate quantification of E. coli can be realized by counting the number of positive microwells. We also show that the chemiluminescence digital microwell array chip is not affected by the turbidity of the test samples as well as the temperature. Most importantly, our method can differentiate live and dead bacteria through bacterial proliferation and enzyme expression, which is confirmed by detecting E. coli after pH and chlorination treatment. By comparing with the standard method of plate counting, our method has comparable performance but significantly reduces the testing time from over 24 h-2 h and 4 h for qualitative and quantitative analysis, respectively. In addition, the microfluidic chip is portable and easy to operate without external pump, which is promising as a rapid and on-site platform for single E. coli analysis in water and food monitoring, as well as infection diagnosis.
Assuntos
Técnicas Biossensoriais , Infecções por Escherichia coli , Escherichia coli , Humanos , Luminescência , Microfluídica/métodosRESUMO
Rapid screening of foodborne pathogens is key to preventing food poisoning. In this study, a slidable centrifugal disc was developed for automatic and multi-channel detection of Salmonella typhimurium using Flinders Technology Associates (FTA) cards for nucleic acid extraction and recombinase aided amplification (RAA) for nucleic acid detection. The slidable FTA switching and centrifugal fluidic control were elaborately combined to achieve fully automatic operations, including centrifugation of the bacterial sample to obtain the concentrated bacteria, heating and drying of the FTA card to extract the nucleic acids, washing of the FTA card to remove the impurities, and RAA detection of the extracted DNA to determine the concentration. Under the optimal conditions, this slidable centrifugal disc was able to detect 10 CFU mL-1 in a spiked chicken meat supernatant in 1 h with an average recovery of 101.8% and an average standard deviation of 6.5%. This disc has been demonstrated as an alternative for sample-in-result-out detection of Salmonella and has shown potential for simultaneous detection of multiple bacteria.
Assuntos
Ácidos Nucleicos , Recombinases , Bactérias/genética , Dispositivos Lab-On-A-Chip , Técnicas de Amplificação de Ácido Nucleico , Salmonella typhimurium/genética , TecnologiaRESUMO
An impedance biosensor using rotary magnetic separation and cascade reaction was developed for rapid and ultrasensitive detection of Salmonella typhimurium. First, magnetic nanoparticles (MNPs) modified with anti-Salmonella monoclonal antibodies were injected into a capillary at the presence of a rotary high gradient magnetic field, which was rotated by a stepper motor. Then, a bacterial sample was injected into the capillary and the target bacteria were continuous-flow captured onto the MNPs. After organic-inorganic hybrid nanoflowers were prepared using manganese dioxide (MnO2), glucose oxidase (GOx) and anti-Salmonella polyclonal antibodies (pAbs), they were injected to label the bacteria, resulting in the formation of MNP-bacteria-nanoflower sandwich complexes. Finally, glucose (low conductivity) was injected and oxidized by GOx on the complexes to produce H2O2 (low conductivity) and gluconic acid (high conductivity), leading to impedance decrease. Besides, the produced H2O2 triggered a cascade reduction of MnO2 into Mn2+, leading to further impedance decrease. The impedance changes were measured using an interdigitated microelectrode and used to determine the concentration of target bacteria. This biosensor was able to detect Salmonella ranging from 101 to 106 CFU/mL in 2 h with a low detection limit of 101 CFU/mL and a mean recovery of 100.1% for the spiked chicken samples.