Concentration-Dependent, Membrane-Selective Activity of Human LL37 Peptides Modified with Collagen Binding Domain Sequences.

Antimicrobial peptides (AMPs) such as LL37 are promising alternatives to antibiotics to treat wound infections due to their broad activity, immunomodulatory functions, and low likelihood of antimicrobial resistance. To deliver LL37 to chronic wounds, we developed two chimeric LL37 peptides with C-terminal collagen binding domains (CBD) derived from collagenase ( cCBD-LL37) and fibronectin ( fCBD-LL37) as a strategy for noncovalent tethering of LL37 onto collagen-based, commercially available wound dressings. The addition of CBD sequences to LL37 resulted in differences in cytotoxicity against human fibroblasts and antimicrobial activity against common wound pathogens. In this study, we sought to determine the sequence-, structure-, and concentration-dependent properties underlying these differences in bioactivity. Molecular dynamics (MD) simulations allowed visualization of the structure of each peptide and calculation of residue-level helicity, revealing that residues within the CBD domains were not helical. Circular dichroism (CD) spectroscopy affirmed that the overall structures of LL37 and each CBD-LL37 peptide was primarily helical (greater than 67%) in a membrane-like solvent. Quartz crystal microbalance with dissipation (QCM-D) and imaging of fluorescent bilayers revealed unique, concentration-dependent interactions of each peptide with bilayers of different lipid compositions. Specifically, fCBD-LL37, which is less cytotoxic than LL37 and cCBD-LL37, demonstrated higher affinity toward anionic bilayers (model bacterial cell membranes) than zwitterionic bilayers (model mammalian cell membranes). In contrast, cCBD-LL37 and LL37 demonstrated similar affinities to both types of bilayers. This study demonstrates that the combination of MD, CD, and QCM-D may enable predictive modeling of the effects of primary sequence alterations on peptide secondary structure and membrane interactions. Understanding the structural and mechanistic properties of AMPs and their interactions with specific lipid bilayer compositions may enable the engineering of less cytotoxic AMPs with improved therapeutic indexes for human wound healing applications.

Effect of acyl chain length on therapeutic activity and mode of action of the CX-KYR-NH2 antimicrobial lipopeptide.

Peptide lipidation has proven to be an inexpensive and effective strategy for designing next-generation peptide-based drug compounds. In this study, the effect of the acyl chain length of ultrashort LiPs (CX-KYR-NH2; X=10, 12, 14 and 16) on their bacterial killing and membrane disruption kinetics was investigated. The geometric mean of the minimum inhibitory concentration (MIC) values for 4 pathogenic bacterial strains was 25 µM, with a selectivity index of 10.24 for C14-KYR-NH2. LiPs at all concentrations exhibited no cytotoxicity towards human erythrocytes, but towards Vero cells at 80 µM. All the LiPs adopted secondary structure in a membrane mimicking environment. C14-KYR-NH2 aggregated above 256 µM, while C16-KYR-NH2 did above 80 µM. All LiPs showed outer membrane permeabilization within 3 min after treatment, yet the extent and kinetics of inner membrane penetration and depolarization were dependent on the acyl chain length. Cell death subsequently occurred within 10 min, and killing activity appeared to correlate most with depolarization activity but not with outer or inner membrane permeability. AFM imaging of cells treated with C14-KYR-NH2 revealed rupture of the cell surface and cytosolic leakage depending on the length of incubation. This study highlights and follows the progression of events that occur during the membrane disintegration process over time, and determines the optimal amphipathicity of ultrashort LiPs with 12-14 carbon atoms for this membrane disrupting activity. The fast acting bactericidal properties of ultrashort LiPs with optimal chain lengths make them promising candidates for drug lead compounds.

LL37-Derived Fragments Improve the Antibacterial Potential of Penicillin G and Ampicillin against Methicillin-Resistant Staphylococcus aureus.

Methicillin-resistant Staphylococcus aureus (MRSA) infections are a severe threat to public health. Antimicrobial peptides (AMPs) are novel and potential antimicrobials with specific antibacterial mechanisms. Our aim was to study the potential of LL37, FK16, and FK13 to enhance the anti-MRSA activity of antibiotics in vitro, particularly penicillin G and ampicillin. Our results showed that FK16 and FK13 have more synergistic inhibitory effects to MRSA strains when combined with penicillin G and ampicillin. In addition, AMPs exhibited strong membrane permeabilizing properties, and membrane permeabilizing effects can provide a possible explanation for the improved antibacterial effects of antibiotics, since permeabilizing AMPs have the potential to increase the access of antibiotics. To further study the electrostatic interactions among cationic AMPs with negatively charged bacteria, we measured the zeta potentials of three MRSA strains and also neutralized three MRSA strains with the addition of cationic AMPs. Further, we demonstrated the connection between membrane permeabilization and zeta potential neutralization. Finally, we treated MRSA strains with AMPs and characterized the MICs of penicillin G and ampicillin. FK16 was the most promising AMP among the three AMPs, since exposure to FK16 decreased the MICs of both penicillin G and ampicillin for all MRSA strains and also demonstrated more synergistic combinations when combined with antibiotics. AMP exposure and subsequent membrane permeabilization provide a possible pathway to re-sensitize drug-resistant bacteria to traditional antibiotics. Re-sensitization may help preserve the effectiveness of traditional antibiotics, thus providing a potential new strategy for fighting MRSA infections.

Characterization of LL37 Binding to Collagen through Peptide Modification with a Collagen-Binding Domain.

Collagen-based biomaterials loaded with antimicrobial peptides (AMPs) present a promising approach for promoting wound healing while providing protection against infections. In our previous work, we modified the AMP LL37 by incorporating a collagen-binding domain (cCBD) as an anchoring unit for collagen-based wound dressings. We demonstrated that cCBD-modified LL37 (cCBD-LL37) exhibited improved retention on collagen after washing with PBS. However, the binding mechanism of cCBD-LL37 to collagen remained to be elucidated. In this study, we found that cCBD-LL37 showed a slightly higher affinity for collagen compared to LL37. Our results indicated that cCBD inhibited cCBD-LL37 binding to collagen but did not fully eliminate the binding. This suggests that cCBD-LL37 binding to collagen may involve more than just one-site-specific binding through the collagen-binding domain, with non-specific interactions also playing a role. Electrostatic studies revealed that both LL37 and cCBD-LL37 interact with collagen via long-range electrostatic forces, initiating low-affinity binding that transitions to close-range or hydrophobic interactions. Circular dichroism analysis showed that cCBD-LL37 exhibited enhanced structural stability compared to LL37 under varying ionic strengths and pH conditions, implying potential improvements in antimicrobial activity. Moreover, we demonstrated that the release of LL37 and cCBD-LL37 into the surrounding medium was influenced by the electrostatic environment, but cCBD could enhance the retention of peptide on collagen scaffolds. Collectively, these results provide important insights into cCBD-modified AMP-binding mechanisms and suggest that the addition of cCBD may enhance peptide structural stability and retention under varying electrostatic conditions.

Formation of a Fully Anionic Supported Lipid Bilayer to Model Bacterial Inner Membrane for QCM-D Studies.

Supported lipid bilayers (SLBs) on quartz crystals are employed as versatile model systems for studying cell membrane behavior with the use of the highly sensitive technique of quartz crystal microbalance with dissipation monitoring (QCM-D). Since the lipids constituting cell membranes vary from predominantly zwitterionic lipids in mammalian cells to predominantly anionic lipids in the inner membrane of Gram-positive bacteria, the ability to create SLBs of different lipid compositions is essential for representing different cell membranes. While methods to generate stable zwitterionic SLBs and zwitterionic-dominant mixed zwitterionic-anionic SLBs on quartz crystals have been well established, there are no reports of being able to form predominantly or fully anionic SLBs. We describe here a method for forming entirely anionic SLBs by treating the quartz crystal with cationic (3-aminopropyl) trimethoxysilane (APTMS). The formation of the anionic SLB was tracked using QCM-D by monitoring the adsorption of anionic lipid vesicles to a quartz surface and subsequent bilayer formation. Anionic egg L-α-phosphatidylglycerol (PG) vesicles adsorbed on the surface-treated quartz crystal, but did not undergo the vesicle-to-bilayer transition to create an SLB. However, when PG was mixed with 10-40 mole% 1-palmitoyl-2-hydroxy-sn-glycero-3-phospho-(1'-rac-glycerol) (LPG), the mixed vesicles led to the formation of stable SLBs. The dynamics of SLB formation monitored by QCM-D showed that while SLB formation by zwitterionic lipids followed a two-step process of vesicle adsorption followed by the breakdown of the adsorbed vesicles (which in turn is a result of multiple events) to create the SLB, the PG/LPG mixed vesicles ruptured immediately on contacting the quartz surface resulting in a one-step process of SLB formation. The QCM-D data also enabled the quantitative characterization of the SLB by allowing estimation of the lipid surface density as well as the thickness of the hydrophobic region of the SLB. These fully anionic SLBs are valuable model systems to conduct QCM-D studies of the interactions of extraneous substances such as antimicrobial peptides and nanoparticles with Gram-positive bacterial membranes.

New antimicrobial peptide-antibiotic combination strategy for Pseudomonas aeruginosa inactivation.

Novel antimicrobials or new treatment strategies are urgently needed to treat Pseudomonas aeruginosa (P. aeruginosa) related infections and especially to address the problem of antibiotic resistance. We propose a novel strategy that combines the human antimicrobial peptide (AMP) LL37 with different antibiotics to find synergistic AMP-antibiotic combinations against P. aeruginosa strains in vitro. Our results showed that LL37 exhibited synergistic inhibitory and bactericidal effects against P. aeruginosa strains PAO1 and PA103 when combined with the antibiotics vancomycin, azithromycin, polymyxin B, and colistin. In addition, LL37 caused strong outer membrane permeabilization, as demonstrated through measurement of an increased uptake of the fluorescent probe N-phenyl-1-naphthylamine. The membrane permeabilization effects appear to explain why it was easier to rescue the effectiveness of the antibiotic toward the bacteria because the outer membrane of P. aeruginosa exhibits barrier function for antibiotics. Furthermore, the change in the zeta potential was measured for P. aeruginosa strains with the addition of LL37. Zeta potentials for P. aeruginosa strains PAO1 and PA103 were -40.9 and -10.9 mV, respectively. With the addition of LL37, negative zeta potentials were gradually neutralized. We found that positively charged LL37 can interact with and neutralize the negatively charged bacterial outer membrane through electrostatic interactions, and the process of neutralization is believed to have contributed to the increase in outer membrane permeability. Finally, to further illustrate the relationship between outer membrane permeabilization and the uptake of antibiotics, we used LL37 to make the outer membrane of P. aeruginosa strains more permeable, and minimum inhibitory concentrations (MICs) for several antibiotics (colistin, gentamicin, polymyxin B, vancomycin, and azithromycin) were measured. The MICs decreased were twofold to fourfold, in general. For example, the MICs of azithromycin and vancomycin decreased more than fourfold when against P. aeruginosa strain PAO1, which were the greatest decrease of any of the antibiotics tested in this experiment. As for PA103, the MIC of polymyxin B2 decreased fourfold, which was the strongest decrease seen for any of the antibiotics tested in this experiment. The increased uptake of antibiotics not only demonstrates the barrier role of the outer membrane but also validates the mechanism of synergistic effects that we have proposed. These results indicate the great potential of an LL37-antibiotic combination strategy and provide possible explanations for the mechanisms behind this synergy.

LL37 and collagen-binding domain-mediated LL37 binding with type I collagen: Quantification via QCM-D.

Antimicrobial peptide (AMP)-loaded biomaterials may represent a viable alternative for stimulating wound healing while protecting against infections. Previously, to develop an efficient delivery system for the cathelicidin antimicrobial peptide, LL37, our lab modified LL37 with a collagen-binding domain derived from collagenase (cCBD) as an anchoring unit to collagen-based wound dressings. However, a direct quantification of unmodified LL37 and cCBD-LL37 binding with collagen has not been performed. In this study, we used quartz crystal microbalance with dissipation monitoring (QCM-D), immunohistochemistry (IHC), and atomic force microscopy (AFM) to establish and characterize an adsorbed layer of type I collagen on the QCM-D sensor and quantify peptide-collagen binding. A collagen deposition protocol was successfully established by measuring concentration-dependent deposition of collagen in QCM-D, and collagen self-assembly was observed by IHC and AFM. Hydrophobicity is known to affect the behavior of collagen adsorption. Therefore, we compared the deposition of collagen on hydrophilic SiO2-coated sensors vs. hydrophobic polystyrene (PS)-coated sensors via QCM-D, and found that the hydrophobic surface yielded more collagen adsorption, which suggested that hydrophobic surfaces are preferable for collagen layer establishment. There was no significant difference between LL37 and cCBD-LL37 binding with collagen, but the cCBD-LL37 showed better retention on the collagen after washing with PBS, indicating that there is an advantage to using cCBD as an anchoring unit to collagen. Collectively, these results provide important information on cCBD-mediated AMP-binding mechanisms and establish an effective method for quantifying peptide-collagen binding.

Relating the physical properties of Pseudomonas aeruginosa lipopolysaccharides to virulence by atomic force microscopy.

Lipopolysaccharides (LPS) are an important class of macromolecules that are components of the outer membrane of Gram-negative bacteria such as Pseudomonas aeruginosa. P. aeruginosa contains two different sugar chains, the homopolymer common antigen (A band) and the heteropolymer O antigen (B band), which impart serospecificity. The characteristics of LPS are generally assessed after isolation rather than in the context of whole bacteria. Here we used atomic force microscopy (AFM) to probe the physical properties of the LPS of P. aeruginosa strain PA103 (serogroup O11) in situ. This strain contains a mixture of long and very long polymers of O antigen, regulated by two different genes. For this analysis, we studied the wild-type strain and four mutants, ΔWzz1 (producing only very long LPS), ΔWzz2 (producing only long LPS), DΔM (with both the wzz1 and wzz2 genes deleted), and Wzy::GM (producing an LPS core oligosaccharide plus one unit of O antigen). Forces of adhesion between the LPS on these strains and the silicon nitride AFM tip were measured, and the Alexander and de Gennes model of steric repulsion between a flat surface and a polymer brush was used to calculate the LPS layer thickness (which we refer to as length), compressibility, and spacing between the individual molecules. LPS chains were longest for the wild-type strain and ΔWzz1, at 170.6 and 212.4 nm, respectively, and these values were not statistically significantly different from one another. Wzy::GM and DΔM have reduced LPS lengths, at 34.6 and 37.7 nm, respectively. Adhesion forces were not correlated with LPS length, but a relationship between adhesion force and bacterial pathogenicity was found in a mouse acute pneumonia model of infection. The adhesion forces with the AFM probe were lower for strains with LPS mutations, suggesting that the wild-type strain is optimized for maximal adhesion. Our research contributes to further understanding of the role of LPS in the adhesion and virulence of P. aeruginosa.

Atomic Force Microscopy to Characterize Antimicrobial Peptide-Induced Defects in Model Supported Lipid Bilayers.

Antimicrobial peptides (AMPs) interact with bacterial cell membranes through a variety of mechanisms, causing changes extending from nanopore formation to microscale membrane lysis, eventually leading to cell death. Several AMPs also disrupt mammalian cell membranes, despite their significantly different lipid composition and such collateral hemolytic damage hinders the potential therapeutic applicability of the AMP as an anti-microbial. Elucidating the mechanisms underlying the AMP-membrane interactions is challenging due to the variations in the chemical and structural features of the AMPs, the complex compositional variations of cell membranes and the inadequacy of any single experimental technique to comprehensively probe them. (1) Background: Atomic Force Microscopy (AFM) imaging can be used in combination with other techniques to help understand how AMPs alter the orientation and structural organization of the molecules within cell membranes exposed to AMPs. The structure, size, net charge, hydrophobicity and amphipathicity of the AMPs affect how they interact with cell membranes of differing lipid compositions. (2) Methods: Our study examined two different types of AMPs, a 20-amino acid, neutral, α-helical (amphipathic) peptide, alamethicin, and a 13-amino acid, non-α-helical cationic peptide, indolicidin (which intramolecularly folds, creating a hydrophobic core), for their interactions with supported lipid bilayers (SLBs). Robust SLB model membranes on quartz supports, incorporating predominantly anionic lipids representative of bacterial cells, are currently not available and remain to be developed. Therefore, the SLBs of zwitterionic egg phosphatidylcholine (PC), which represents the composition of a mammalian cell membrane, was utilized as the model membrane. This also allows for a comparison with the results obtained from the Quartz Crystal Microbalance with Dissipation (QCM-D) experiments conducted for these peptides interacting with the same zwitterionic SLBs. Further, in the case of alamethicin, because of its neutrality, the lipid charge may be less relevant for understanding its membrane interactions. (3) Results: Using AFM imaging and roughness analysis, we found that alamethicin produced large, unstable defects in the membrane at 5 µM concentrations, and completely removed the bilayer at 10 µM. Indolicidin produced smaller holes in the bilayer at 5 and 10 µM, although they were able to fill in over time. The root-mean-square (RMS) roughness values for the images showed that the surface roughness caused by visible defects peaked after peptide injection and gradually decreased over time. (4) Conclusions: AFM is useful for helping to uncover the dynamic interactions between different AMPs and cell membranes, which can facilitate the selection and design of more efficient AMPs for use in therapeutics and antimicrobial applications.

AFM Study of Nanoscale Membrane Perturbation Induced by Antimicrobial Lipopeptide C14 KYR.

Lipopeptides have been extensively studied as potential antimicrobial agents. In this study, we focused on the C14-KYR lipopeptide, a modified version of the KYR tripeptide with myristic acid at the N-terminus. Here, membrane perturbation of live E. coli treated with the parent KYR and C14-KYR peptides was compared at the nanoscale level using AFM imaging. AFM analyses, including average cellular roughness and force spectroscopy, revealed the severe surface disruption mechanism of C14-KYR. A loss of surface roughness and changes in topographic features included membrane shrinkage, periplasmic membrane separation from the cell wall, and cytosolic leakage. Additional evidence from synchrotron radiation FTIR microspectroscopy (SR-FTIR) revealed a marked structural change in the membrane component after lipopeptide attack. The average roughness of the E. coli cell before and after treatment with C14-KYR was 129.2 ± 51.4 and 223.5 ± 14.1 nm, respectively. The average rupture force of the cell treated with C14-KYR was 0.16 nN, four times higher than that of the untreated cell. Our study demonstrates that the mechanistic effect of the lipopeptide against bacterial cells can be quantified through surface imaging and adhesion force using AFM.

Effects of L-alanine and inosine germinants on the elasticity of Bacillus anthracis spores.

The surface of dormant Bacillus anthracis spores consists of a multilayer of protein coats and a thick peptidoglycan layer that allow the cells to resist chemical and environmental insults. During germination, the spore coat is degraded, making the spore susceptible to chemical inactivation by antisporal agents as well as to mechanical inactivation by high-pressure or mechanical abrasion processes. While chemical changes during germination, especially the release of the germination marker, dipicolinic acid (DPA), have been extensively studied, there is as yet no investigation of the corresponding changes in the mechanical properties of the spore. In this work, we use atomic force microscopy (AFM) to characterize the mechanical properties of the surface of Bacillus anthracis spores during germination. The Hertz model of continuum mechanics of contact was used to evaluate the Young's moduli of the spores before and after germination by applying the model to load-indentation curves. The highest modulus was observed for dormant spores, with average elasticity values of 197 +/- 81 MPa. The elasticity decreased significantly after incubation of the spores with the germinants L-alanine or inosine (47.5 +/- 41.7 and 35.4 +/- 15.8 MPa, respectively). Exposure of B. anthracis spores to a mixture of both germinants resulted in a synergistic effect with even lower elasticity, with a Young's modulus of 23.5 +/- 14.8 MPa. The elasticity of the vegetative B. anthracis cells was nearly 15 times lower than that of the dormant spores (12.4 +/- 6.3 MPa vs 197.0 +/- 80.5 MPa, respectively). Indeed from a mechanical strength point of view, the germinated spores were closer to the vegetative cells than to the dormant spores. Further, the decrease in the elasticity of the cells was accompanied by increasing AFM tip indentation depths on the cell surfaces. Indentation depths of up to 246.2 nm were observed for vegetative B. anthracis compared to 20.5 nm for the dormant spores. These results provide quantitative information on how the mechanical properties of the cell wall change during germination, which may explain how spores become susceptible to inactivation processes based on mechanical forces during germination and outgrowth. The study of spore elasticity may be a valuable tool in the design of improved antisporal treatments.

Alginate Affects Bioactivity of Chimeric Collagen-Binding LL37 Antimicrobial Peptides Adsorbed to Collagen-Alginate Wound Dressings.

Chronic infected wounds cause more than 23,000 deaths annually. Antibiotics and antiseptics are conventionally used to treat infected wounds; however, they can be toxic to mammalian cells, and their use can contribute to antimicrobial resistance. Antimicrobial peptides (AMPs) have been utilized to address the limitations of antiseptics and antibiotics. In previous work, we modified the human AMP LL37 with collagen-binding domains from collagenase (cCBD) or fibronectin (fCBD) to facilitate peptide tethering and delivery from collagen-based wound dressings. We found that cCBD-LL37 and fCBD-LL37 were retained and active when bound to 100% collagen scaffolds. Collagen wound dressings are commonly made as composites with other materials, such as alginate. The goal of this study was to investigate how the presence of alginate affects the tethering, release, and antimicrobial activity of LL37 and CBD-LL37 peptides adsorbed to commercially available collagen-alginate wound dressings (FIBRACOL Plus-a 90% collagen and 10% alginate wound dressing). We found that over 85% of the LL37, cCBD-LL37, and fCBD-LL37 was retained on FIBRACOL Plus over a 14-day release study (90.3, 85.8, and 98.6%, respectively). Additionally, FIBRACOL Plus samples loaded with peptides were bactericidal toward Pseudomonas aeruginosa, even after 14 days in release buffer but demonstrated no antimicrobial activity against Escherichia coli, Staphylococcus aureus, and Staphylococcus epidermidis. The presence of alginate in solution induced conformational changes in the cCBD-LL37 and LL37 peptides, resulting in increased peptide helicity, and reduced antimicrobial activity against P. aeruginosa. Peptide-loaded FIBRACOL Plus scaffolds were not cytotoxic to human dermal fibroblasts. This study demonstrates that CBD-mediated LL37 tethering is a viable strategy to reduce LL37 toxicity, and how substrate composition plays a crucial role in modulating the antimicrobial activity of tethered AMPs.

Role of lipopolysaccharides and lipoteichoic acids on C-Chrysophsin-1 interactions with model Gram-positive and Gram-negative bacterial membranes.

Antimicrobial peptides (AMPs) are attractive as biomaterial coatings because they have broad spectrum activity against different microbes, with a low likelihood of incurring antimicrobial resistance. Direct action against the bacterial membrane is the most common mechanism of action (MOA) of AMPs, with specific MOAs dependent on membrane composition, peptide concentration, and environmental factors that include temperature. Chrysophsin-1 (CHY1) is a broad spectrum salt-tolerant AMP that is derived from a marine fish. A cysteine modification was made to the peptide to facilitate attachment to a surface, such as a biomedical device. The authors used quartz crystal microbalance with dissipation monitoring to study how temperature (23 and 37 °C) and lipid composition influence the MOA of cysteine-modified peptide (C-CHY1) with model membranes comprised of supported lipid bilayers (SLBs). These two temperatures were used so that the authors could better understand the differences in behavior between typical lab temperatures and physiologic conditions. The authors created model membranes that mimicked properties of Gram-negative and Gram-positive bacteria in order to understand how the mechanisms might differ for different types of bacterial systems. SLB models of Gram-positive bacterial membranes were formed using combinations of phosphatidylcholine, phosphatidylglycerol (PG), and S. aureus-derived lipoteichoic acid (LTA). SLB models of Gram-negative bacterial membranes were formed using combinations of phosphatidylethanolamine (PE), PG, and E. coli-derived lipopolysaccharides (LPS). The molecules that distinguish Gram-positive and Gram-negative membranes (LTA and LPS) have the potential to alter the MOA of C-CHY1 with the SLBs. The authors' results showed that the MOA for the Gram-positive SLBs was not sensitive to temperature, but the LTA addition did have an effect. Specifically, similar trends in frequency and dissipation changes across all overtones were observed, and the same mechanistic trends were observed in the polar plots at 23 and 37 °C. However, when LTA was added, polar plots showed an association between C-CHY1 and LTA, leading to SLB saturation. This was demonstrated by significant changes in dissipation, while the frequency (mass) was not increasing after the saturation point. For the Gram-negative SLBs, the composition did not have a significant effect on MOA, but the authors saw more differences between the two temperatures studied. The authors believe this is due to the fact that the gel-liquid crystal transition temperature of PE is 25 °C, which means that the bilayer is more rigid at 23 °C, compared to temperatures above the transition point. At 23 °C, a significant energetic shift would be required to allow for additional AMP insertion. This could be seen in the polar plots, where there was a steep slope but there was very little mass addition. At 37 °C, the membrane is more fluid and there is less of an energetic requirement for insertion. Therefore, the authors observed greater mass addition and fewer changes in dissipation. A better understanding of C-CHY1 MOA using different SLB models will allow for the more rational design of future therapeutic solutions that make use of antimicrobial peptides, including those involving biomaterial coatings.

Atomic force microscopy study of the role of LPS O-antigen on adhesion of E. coli.

The O-antigen is a highly variable component of the lipopolysaccharide (LPS) among Escherichia coli strains and is useful for strain identification and assessing virulence. While the O-antigen has been chemically well characterized in terms of sugar composition, physical properties such as O-antigen length of E. coli LPS have not been well studied, even though LPS length is important for determining binding of bacteria to biomolecules and epithelial cells. Atomic force microscopy (AFM) was used to characterize the physicochemical properties of the LPS of eight E. coli strains. Steric repulsion between the AFM tip (silicon nitride) and the E. coli cells was measured and modeled, to determine LPS lengths for three O157 and two O113 E. coli strains, and three control (K12) strains that do not express the O-antigen. For strains with an O-antigen, the LPS lengths ranged from 17 +/- 10 to 37 +/- 9 nm, and LPS length was positively correlated with the force of adhesion (F(adh)). Longer lengths of LPS may have allowed for more hydrogen bonding between the O-antigen and silanol groups of the AFM silicon nitride tip, which controlled the magnitude of F(adh). For control strains, LPS lengths ranged from 3 +/- 2 to 5 +/- 3 nm, and there was no relationship between LPS length and adhesion force between the bacterium and the silicon nitride tip. In the absence of the O-antigen, we attributed F(adh) to electrostatic interactions with lipids in the bacterial membrane.

Atomic force microscopy study of germination and killing of Bacillus atrophaeus spores.

Bacterial spores such as Bacillus atrophaeus are one of the most resistant life forms known and are extremely resistant to chemical and environmental factors in the dormant state. During germination, as bacterial spores progress towards the vegetative state, they become susceptible to anti-sporal agents. B. atrophaeus spores were exposed to the non-nutritive germinant dodecylamine (DDA), a cationic surfactant that can also be used as a killing agent, for up to 60 min, or to the nutrient germinant L-alanine. In kinetic studies, 99% of the spores were killed within 5 min of exposure to DDA. Atomic force microscopy (AFM) can be used as a sensitive tool to assess how the structure of the spore coat changes upon exposure to germinants or killing agents. Changes in cell height and roughness over time of exposure to DDA were examined using AFM. DDA caused the spore height to decrease by >50%, which may have been due to a partial breakdown of the spore coat. Treatment of B. atrophaeus with the nutrient germinant resulted in a decrease in height of spores after 2 h of incubation, from 0.7 +/- 0.1 microm to 0.3 +/- 0.2 microm. However, treatment with L-alanine did not change the surface roughness of the spores, indicating that the changes that occur during germination take place underneath the spore coat. We propose that exposure to DDA at high concentrations causes pores to form in the coat layer, killing B. atrophaeus without the need to fully germinate spores.

Mechanistic predictions of the influence of collagen-binding domain sequences on human LL37 interactions with model lipids using quartz crystal microbalance with dissipation.

Modifications of human-derived antimicrobial peptide LL37 with collagen binding domains (CBD-LL37) hold promise as alternatives to antibiotics due to their wider therapeutic ratio than unmodified LL37 when interacting with collagen substrates such as commercial wound dressings. However, CBD-LL37 lipid membrane interaction mechanisms (against both mammalian and bacterial lipids) are not well understood. Our goal was to develop a mechanistic explanation of how CBDs modulate peptide-lipid interactions leading to their observed bioactivities, in order to better understand their potential for clinical applications. The authors studied time- and concentration-dependent interactions of CBD-LL37 modified with collagenase (cCBD) and fibronectin (fCBD) CBDs, with zwitterionic and anionic supported lipid bilayers, in order to model mammalian erythrocytes and bacterial cells, respectively. Quartz crystal microbalance with dissipation monitoring (QCM-D) was used to characterize peptide-lipid interactions at concentrations in the immunomodulatory (0.5-1.0 µM), antimicrobial (1.0-5.0 µM), and cytotoxic (5.0-10.0 µM) ranges. Their prior work with zwitterionic membranes demonstrated that cCBD-LL37 formed transmembrane pores while fCBD-LL37 underwent surface adsorption. Our goal in this study is to better interpret these results, by investigating the data at a wider concentration range and for two types of lipids, and by applying the Voigt-Kelvin viscoelastic model to calculate thickness and density changes of the peptide-lipid films as a function of time and concentration, thus providing information to help build detailed mechanisms of peptide/bilayer interactions. For pore-forming cCBD-LL37 and unmodified LL37, they found that there was a relationship between layer thicknesses and pore formation, which was attributed to different peptide orientation changes influenced by bilayer charge prior to pore formation. Specifically, cCBD-LL37 at 0.5 and 1.0 µM demonstrated higher thicknesses on zwitterionic than anionic membranes, indicating that prior to insertion into zwitterionic membranes, it orients perpendicular to the surface, which was also consistent with the higher dissipation changes observed on zwitterionic membranes. fCBD-LL37 demonstrated a bilayer adsorption mechanism with a preference toward anionic lipids. Adsorption of fCBD-LL37 onto anionic lipids demonstrated a rapid first adsorption step that transitioned depending on the number of fCBD-LL37 molecules on the bilayer. For this peptide at higher concentrations, greater dissipation changes were observed than for fCBD-LL37 physically adsorbed onto surfaces without bilayers. This suggests that peptide-peptide interactions promoted by the fCBD domain dominated after saturation. The development of a structure-function relationship for cCBD-LL37 and fCBD-LL37 demonstrates promise for using QCM-D predictions to inform the rational design of novel, antimicrobial, and noncytotoxic CBD-LL37 for clinical applications.

QCM-D characterization of time-dependence of bacterial adhesion.

Quartz crystal microbalance with dissipation monitoring (QCM-D) is becoming an increasingly popular technique that can be employed as part of experimental and modeling investigations of bacterial adhesion. The usefulness of QCM-D derives from this technique's ability to probe binding and interactions under dynamic conditions, in real time. Bacterial adhesion is an important first step in the formation of biofilms, the control of which is relevant to industries that include shipping, water purification, packaging, and biomedical devices. However, many questions remain unanswered in the bacterial adhesion process, despite extensive research in this area. With QCM-D, multiple variables affecting bacterial adhesion can be studied, including the roles of substrate composition, chemical modification, solution ionic strength, environmental temperature, shear conditions, and time. Recent studies demonstrate the utility of QCM-D in developing new bacterial adhesion models and studying different stages of biofilm formation. We provide a review of how QCM-D has been used to study bacterial adhesion at stages ranging from the first step of bacterial adhesion to mature biofilms, and how QCM-D studies are being used to promote the development of solutions to biofilm formation.

Adhesion forces between Staphylococcus epidermidis and surfaces bearing self-assembled monolayers in the presence of model proteins.

Self-assembled monolayers (SAMs) are being developed into coatings to reduce microbial biofilm formation on biomaterials. To test anti-adhesion properties, SAMs can be easily constructed on gold, and used to represent a coated biomaterial. However, coatings that prevent bacterial adhesion must also resist protein adsorption. We explored the competitive effects of bacteria and protein for adsorption to SAMs, choosing fetal bovine serum (FBS) to represent protein non-specific binding, and fibronectin (FN) to evaluate ligand/receptor binding. Staphylococcus epidermidis were immobilized on an atomic force microscope (AFM) tip and used as a force probe to detect the interaction forces between bacteria and gold-coated SAMs. The SAMs tested were alkanethiol molecules terminating in isophthalic acid (IPA) or isophthalic acid with silver (IAG). While S. epidermidis showed weak interactions with FBS, the bacteria showed strong adhesion with FN, due to ligand/receptor binding. Bacterial retention and viability experiments were correlated with the force measurements. S. epidermidis interacting with IAG SAMs showed a loss of viability, due to the mobility of silver ions. For most substrata, there was a link between high adhesion forces with bacteria and a high percentage of dead cells being retained on that substratum (even in the absence of a specific biocidal effect, such as silver). This may suggest that high adhesion forces can cause stress to the bacteria which contributed to their death. The relationship between highly adhesive SAMs and bacterial inactivation may be useful in future biomaterial design. When evaluating coatings for biomaterials, it is important to consider the interplay between bacteria, proteins, and the coating material.

Importance of LPS structure on protein interactions with Pseudomonas aeruginosa.

Atomic force microscopy (AFM) was used to quantify the adhesion forces between Pseudomonas aeruginosa PAO1 and AK1401, and a representative model protein, bovine serum albumin (BSA). The two bacteria strains differ in terms of the structure of their lipopolysaccharide (LPS) layers. While PAO1 is the wild-type expressing a complete LPS and two types of saccharide units in the O-antigen (A(+) B(+)), the mutant AK1401 expresses only a single unit of the A-band saccharide (A(+) B(-)). The mean adhesion force (F(adh)) between BSA and AK1401 was 1.12 nN, compared to 0.40 nN for F(adh) between BSA and PAO1. In order to better understand the fundamental forces that would control bacterial-protein interactions at equilibrium conditions, we calculated interfacial free energies using the van Oss-Chaudhury-Good (VCG) thermodynamic modeling approach. The hydrogen bond strength was also calculated using a Poisson statistical analysis. AK1401 has a higher ability to participate in hydrogen bonding with BSA than does PAO1, which may be because the short A-band and absence of B-band polymer allowed the core oligosaccharides and lipid A regions to be more exposed and to participate in hydrogen and chemical bonding. Interactions between PAO1 and BSA were weak due to the dominance of neutral and hydrophilic sugars of the A-band polymer. These results show that bacterial interactions with protein-coated surfaces will depend on the types of bonds that can form between bacterial surface macromolecules and the protein. We suggest that strategies to prevent bacterial colonization of biomaterials can focus on inhibiting these bonds.