Surface Lattice Modulation Enables Stable Cycling of High-Loading All-solid-state Batteries at High Voltages.

Halide solid electrolytes, known for their high ionic conductivity at room temperature and good oxidative stability, face notable challenges in all-solid-state Li-ion batteries (ASSBs), especially with unstable cathode/solid electrolyte (SE) interface and increasing interfacial resistance during cycling. In this work, we have developed an Al3+-doped, cation-disordered epitaxial nanolayer on the LiCoO2 surface by reacting it with an artificially constructed AlPO4 nanoshell; this lithium-deficient layer featuring a rock-salt-like phase effectively suppresses oxidative decomposition of Li3InCl6 electrolyte and stabilizes the cathode/SE interface at 4.5 V. The ASSBs with the halide electrolyte Li3InCl6 and a high-loading LiCoO2 cathode demonstrated high discharge capacity and long cycling life from 3 to 4.5 V. Our findings emphasize the importance of specialized cathode surface modification in preventing SE degradation and achieving stable cycling of halide-based ASSBs at high voltages.

Surface Lattice Modulation through Chemical Delithiation toward a Stable Nickel-Rich Layered Oxide Cathode.

Nickel-rich layered oxides (NLOs) are considered as one of the most promising cathode materials for next-generation high-energy lithium-ion batteries (LIBs), yet their practical applications are currently challenged by the unsatisfactory cyclability and reliability owing to their inherent interfacial and structural instability. Herein, we demonstrate an approach to reverse the unstable nature of NLOs through surface solid reaction, by which the reconstructed surface lattice turns stable and robust against both side reactions and chemophysical breakdown, resulting in improved cycling performance. Specifically, conformal La(OH)3 nanoshells are built with their thicknesses controlled at nanometer accuracy, which act as a Li+ capturer and induce controlled reaction with the NLO surface lattices, thereby transforming the particle crust into an epitaxial layer with localized Ni/Li disordering, where lithium deficiency and nickel stabilization are both achieved by transforming oxidative Ni3+ into stable Ni2+. An optimized balance between surface stabilization and charge transfer is demonstrated by a representative NLO material, namely, LiNi0.83Co0.07Mn0.1O2, whose surface engineering leads to a highly improved capacity retention and excellent rate capability with a strong capability to inhibit the crack of NLO particles. Our study highlights the importance of surface chemistry in determining chemical and structural behaviors and paves a research avenue in controlling the surface lattice for the stabilization of NLOs toward reliable high-energy LIBs.

Coordination-Assisted Precise Construction of Metal Oxide Nanofilms for High-Performance Solid-State Batteries.

The application of solid-state batteries (SSBs) is challenged by the inherently poor interfacial contact between the solid-state electrolyte (SSE) and the electrodes, typically a metallic lithium anode. Building artificial intermediate nanofilms is effective in tackling this roadblock, but their implementation largely relies on vapor-based techniques such as atomic layer deposition, which are expensive, energy-intensive, and time-consuming due to the monolayer deposited per cycle. Herein, an easy and low-cost wet-chemistry fabrication process is used to engineer the anode/solid electrolyte interface in SSBs with nanoscale precision. This coordination-assisted deposition is initiated with polyacrylate acid as a functional polymer to control the surface reaction, which modulates the distribution and decomposition of metal precursors to reliably form a uniform crack-free and flexible nanofilm of a large variety of metal oxides. For demonstration, artificial Al2O3 interfacial nanofilms were deposited on a ceramic SSE, typically garnet-structured Li6.5La3Zr1.5Ta0.5O12 (LLZT), that led to a significant decrease in the Li/LLZT interfacial resistance (from 2079.5 to 8.4 Ω cm2) as well as extraordinarily long cycle life of the assembled SSBs. This strategy enables the use of a nickel-rich LiNi0.83Co0.07Mn0.1O2 cathode to deliver a reversible capacity of 201.5 mAh g-1 at a considerable loading of 4.8 mg cm-2, featuring performance metrics for an SSB that is competitive with those of traditional Li-ion systems. Our study demonstrates the potential of solution-based routes as an affordable and scalable manufacturing alternative to vapor-based deposition techniques that can accelerate the development of SSBs for practical applications.

Manipulating Particle Chemistry for Hollow Carbon-based Nanospheres: Synthesis Strategies, Mechanistic Insights, and Electrochemical Applications.

Hollow carbon-based nanospheres (HCNs) have been demonstrated to show promising potential in a large variety of research fields, particularly electrochemical devices for energy conversion/storage. The current synthetic protocols for HCNs largely rely on template-based routes (TBRs), which are conceptually straightforward in creating hollow structures but challenged by the time-consuming operations with a low yield in product as well as serious environmental concerns caused by hazardous etching agents. Meanwhile, they showed inadequate ability to build complex carbon-related architectures. Innovative strategies for HCNs free from extra templates thus are highly desirable and are expected to not only ensure precise control of the key structural parameters of hollow architectures with designated functionalities, but also be environmentally benign and scalable approaches suited for their practical applications.In this Account, we outline our recent research progress on the development of template-free protocols for the creation of HCNs with a focus on the acquired mechanical insight into the hollowing mechanism when no extra templates were involved. We demonstrated that carbon-based particles themselves could act as versatile platforms to create hollow architectures through an effective modulation of their inner chemistry. By means of reaction control, the precursor particles were synthesized into solid ones with a well-designed inhomogeneity inside in the form of different chemical parameters such as molecular weight, crystallization degree, and chemical reactivity, by which we not only can create hollow structures inside particles but also have the ability to tune the key features including compositions, porosity, and dimensional architectures. Accordingly, the functionalities of the prepared HCNs could be systematically altered or optimized for their applications. Importantly, the discussed synthesis approaches are facile and environmentally benign processes with potential for scale-up production.The nanoengineering of HNCs is found to be of special importance for their application in a large variety of electrochemical energy storage and conversion systems where the charge transfer and structural stability become a serious concern. Particular attention in this Account is therefore directed to the potential of HCNs in battery systems such as sodium ion batteries (NIBs) and potassium ion batteries (KIBs), whose electrochemical performances are plagued by the destructive volumetric deformation and sluggish charge diffusion during the intercalation/deintercalation of large-size Na+ or K+. We demonstrated that precise control of the multidimensional factors of the HCNs is critical to offer an optimized design of sufficient reactive sites, excellent charge and mass transport kinetics, and resilient electrode structure and also provide a model system suitable for the study of complicated metal-ion storage mechanisms, such as Na+ storage in a hard carbon anode. We expect that this Account will spark new endeavors in the development of HCNs for various applications including energy conversion and storage, catalysis, biomedicine, and adsorption.

A template-free assembly of Cu,N-codoped hollow carbon nanospheres as low-cost and highly efficient peroxidase nanozymes.

Developing carbon-based materials with high catalytic performance and sensitivity has significance in low-cost and highly efficient nanozymes. Herein, for the first time, Cu,N-codoped hollow carbon nanospheres (CuNHCNs) with highly active Cu-Nx sites were successfully assembled through a template-free strategy, in which Cu2+-poly(m-phenylenediamine) (Cu-PmPD) nanospheres were utilized as the source of Cu, N and C. Benefiting from the synergistic effect of the hollow spherical structure and optimized composition, the CuNHCN exhibits high affinity for 3,3',5,5'-tetramethylbenzidine and H2O2 with 0.0655 mM and 0.918 mM, respectively, which are superior to those of HRP and most metal-based nanozymes. Moreover, by employing glucose and ascorbic acid (AA) as biomolecule models, a CuNHCN-based colorimetric detection platform is developed. The CuNHCN exhibits superior peroxidase mimicking activity and sensitivity in detecting glucose and AA with a detection limit of 0.187 µM and 68.9 nM (S/N = 3), respectively. Also, the colorimetric detection based on the CuNHCN towards glucose and AA in human serum presents superior practicability and accuracy. The assay provides a new avenue for designing and fabricating low-cost peroxidase nanozymes with high performance in bioassays.

A General Synthesis Strategy for Hollow Metal Oxide Microspheres Enabled by Gel-Assisted Precipitation.

Hollow metal oxide microspheres (HMMs) have drawn enormous attention in different research fields. Reliable and scalable synthetic protocols applicable for a large variety of metal oxides are in emergent demand. Here we demonstrated that polymer hydrogel, such as the resorcinol formaldehyde (RF) one, existed as an efficient synthetic platform to build HMMs. Specifically, the RF gel forms stacked RF microspheres enlaced with its aqueous phase, where the following evaporation of the highly dispersed water leads to a gel-assisted precipitation (GAP) of the dissolved metal precursor onto the embedded polymeric solids suited for the creation of HMMs. By taking advantage of the structural features of hydrogel, this synthesis design avoids the delicate control on the usually necessitated coating process and provides a simple and effective synthetic process versatile for functional HMMs, particularly Nb2 O5 as a high-performance electrode material in Li-ion intercalation pseudocapacitor.

Spherical Mesoporous Metal Oxides with Tunable Orientation Enabled by Growth Kinetics Control.

Recent advances in spherical mesoporous metal oxides (SMMOs) have demonstrated their enormous potential in a large variety of research fields. However, a direct creation of these materials with precise control on their key shape features, particularly pore architectures, remains a major challenge as compared to the widely explored counterpart of silica. Here, using Al2O3 as an example, we identified that deposition kinetics in solution played an essential role in the construction of different SMMOs. Specifically, a controlled Al3+ precipitation is critical to maintaining the electrostatic interaction between the inorganic precursors and the molecular templates, thereby achieving a designable assembly of these two components toward uniform mesoporous Al2O3-based nanospheres. We demonstrated that such a synthesis strategy is not only able to precisely control the channel orientations from concentric to radial and dendritic, a synthesis capability impeded so far for SMMOs, but is readily applicable to other metal oxides. Our study showed that the growth-kinetics control is a simple but powerful synthesis protocol and opened up a multifunctional platform to achieve systematic design of SMMOs for their future applications.

Light-Driven Crawling of Molecular Crystals by Phase-Dependent Transient Elastic Lattice Deformation.

The light-driven crawling of a molecular crystal that can form three phases, (α, ß, and γ) is presented. Laser irradiation of the molecular crystal can generate phase-dependent transient elastic lattice deformation. The resulting elastic lattice deformation that follows scanning irradiation of a laser can actuate the different phases of molecular crystal to move with different velocity and direction. Because the γ phase has a large Young's modulus (ca. 26 GPa), a force of 0.1 µN can be generated under one laser spot. The generated force is sufficient to actuate the γ-formed molecular crystals in a wide dimensional range to move longitudinally at a velocity of about 60 µm min-1 , which is two orders of magnitude faster than the α and ß phases.

A Black Phosphorus-Graphite Composite Anode for Li-/Na-/K-Ion Batteries.

Black phosphorus (BP) is a desirable anode material for alkali metal ion storage owing to its high electronic/ionic conductivity and theoretical capacity. In-depth understanding of the redox reactions between BP and the alkali metal ions is key to reveal the potential and limitations of BP, and thus to guide the design of BP-based composites for high-performance alkali metal ion batteries. Comparative studies of the electrochemical reactions of Li+ , Na+ , and K+ with BP were performed. Ex situ X-ray absorption near-edge spectroscopy combined with theoretical calculation reveal the lowest utilization of BP for K+ storage than for Na+ and Li+ , which is ascribed to the highest formation energy and the lowest ion diffusion coefficient of the final potassiation product K3 P, compared with Li3 P and Na3 P. As a result, restricting the formation of K3 P by limiting the discharge voltage achieves a gravimetric capacity of 1300 mAh g-1 which retains at 600 mAh g-1 after 50 cycles at 0.25 A g-1 .

Phase Control on Surface for the Stabilization of High Energy Cathode Materials of Lithium Ion Batteries.

The development of high energy electrode materials for lithium ion batteries is challenged by their inherent instabilities, which become more aggravated as the energy densities continue to climb, accordingly causing increasing concerns on battery safety and reliability. Here, taking the high voltage cathode of LiNi0.5Mn1.5O4 as an example, we demonstrate a protocol to stabilize this cathode through a systematic phase modulating on its particle surface. We are able to transfer the spinel surface into a 30 nm shell composed of two functional phases including a rock-salt one and a layered one. The former is electrochemically inert for surface stabilization while the latter is designated to provide necessary electrochemical activity. The precise synthesis control enables us to tune the ratio of these two phases, and achieve an optimized balance between improved stability against structural degradation without sacrificing its capacity. This study highlights the critical importance of well-tailored surface phase property for the cathode stabilization of high energy lithium ion batteries.

In Vivo Measurement of Calcium Ion with Solid-State Ion-Selective Electrode by Using Shelled Hollow Carbon Nanospheres as a Transducing Layer.

In vivo monitoring of extracellular calcium ion (Ca2+) is of great importance due to its significant contributions in different (patho)physiological processes. In this study, we develop a potentiometric method with solid-state ion-selective electrodes (ISEs) for in vivo monitoring of the dynamics of the extracellular Ca2+ by using hollow carbon nanospheres (HCNs) as a transducing layer and solid contact to efficiently promote the ion-to-electron transduction between an ionophore-doped solvated polymeric membrane and a conducting substrate. We find that the use of HCNs essentially improves the stability of the signal response and minimizes the potential drift of the as-prepared ISEs. With three-shelled HCNs (3s-HCNs) as the transducing layer, we fabricate a solid-state Ca2+-selective microelectrode by forming a Ca2+-selective membrane with calcium ionophore II as the recognition unit, 2-nitrophenyl octyl ether as the plasticizer, sodium tetrakis[3,5-bis(trifluoromethyl)phenyl] borate as the ion exchanger, and polyvinyl chloride polymeric as the matrix onto the 3s-HCN-modified carbon fiber electrodes. The as-prepared electrode shows a high stability and a near Nernst response of 28 mV/decade toward Ca2+ over a concentration range from 10-5 to 0.05 M as well as a good selectivity against species endogenously existing in the central nervous system. With these properties, the electrode is used for real-time recording of the dynamics of extracellular Ca2+ during spreading depression induced by electrical stimulation, in which the extracellular Ca2+ in rat cortex is found to decrease by 50.0 ± 7.5% ( n = 5) during spreading depression. This study essentially offers a new platform to develop solid-state ISEs, which is particularly useful for in vivo measurements of metal ions and pH in live rat brain.

Precise Surface Engineering of Cathode Materials for Improved Stability of Lithium-Ion Batteries.

As lithium-ion batteries continue to climb to even higher energy density, they meanwhile cause serious concerns on their stability and reliability during operation. To make sure the electrode materials, particularly cathode materials, are stable upon extended cycles, surface modification becomes indispensable to minimize the undesirable side reaction at the electrolyte-cathode interface, which is known as a critical factor to jeopardizing the electrode performance. This Review is targeted at a precise surface control of cathode materials with focus on the synthetic strategies suitable for a maximized surface protection ensured by a uniform and conformal surface coating. Detailed discussions are taken on the formation mechanism of the designated surface species achieved by either wet-chemistry routes or instrumental ones, with attention to the optimized electrochemical performance as a result of the surface control, accordingly drawing a clear image to describe the synthesis-structure-performance relationship to facilitate further understanding of functional electrode materials. Finally, perspectives regarding the most promising and/or most urgent developments for the surface control of high-energy cathode materials are provided.

Engineering Hollow Carbon Architecture for High-Performance K-Ion Battery Anode.

K-ion batteries (KIBs) are now drawing increasing research interest as an inexpensive alternative to Li-ion batteries (LIBs). However, due to the large size of K+, stable electrode materials capable of sustaining the repeated K+ intercalation/deintercalation cycles are extremely deficient especially if a satisfactory reversible capacity is expected. Herein, we demonstrated that the structural engineering of carbon into a hollow interconnected architecture, a shape similar to the neuron-cell network, promised high conceptual and technological potential for a high-performance KIB anode. Using melamine-formaldehyde resin as the starting material, we identify an interesting glass blowing effect of this polymeric precursor during its carbonization, which features a skeleton-softening process followed by its spontaneous hollowing. When used as a KIB anode, the carbon scaffold with interconnected hollow channels can ensure a resilient structure for a stable potassiation/depotassiation process and deliver an extraordinary capacity (340 mAh g-1 at 0.1 C) together with a superior cycling stability (no obvious fading over 150 cycles at 0.5 C).

Controlling the Reaction of Nanoparticles for Hollow Metal Oxide Nanostructures.

Hollow nanostructures of metal oxides have found broad applications in different fields. Here, we reported a facile and versatile synthetic protocol to prepare hollow metal oxide nanospheres by modulating the chemical properties in solid nanoparticles. Our synthesis design starts with the precipitation of urea-containing metal oxalate, which is soluble in water but exists as solid nanospheres in ethanol. A controlled particle hydrolysis is achieved through the heating-induced urea decomposition, which transforms the particle composition in an outside-to-inside style: The reaction starts from the surface and then proceeds inward to gradually form a water-insoluble shell of basic metal oxalate. Such a reaction-induced solubility difference inside nanospheres becomes highly efficient to create a hollow structure through a simple water wash process. A following high temperature treatment forms hollow nanospheres of different metal oxides with structural features suited to their applications. For example, a high performance anode for Li-ion intercalation pseudocapacitor was demonstrated with the hollow and mesoporous Nb2O5 nanospheres.

Controlling the Compositional Chemistry in Single Nanoparticles for Functional Hollow Carbon Nanospheres.

Hollow carbon nanostructures have inspired numerous interests in areas such as energy conversion/storage, biomedicine, catalysis, and adsorption. Unfortunately, their synthesis mainly relies on template-based routes, which include tedious operating procedures and showed inadequate capability to build complex architectures. Here, by looking into the inner structure of single polymeric nanospheres, we identified the complicated compositional chemistry underneath their uniform shape, and confirmed that nanoparticles themselves stand for an effective and versatile synthetic platform for functional hollow carbon architectures. Using the formation of 3-aminophenol/formaldehyde resin as an example, we were able to tune its growth kinetics by controlling the molecular/environmental variables, forming resin nanospheres with designated styles of inner constitutional inhomogeneity. We confirmed that this intraparticle difference could be well exploited to create a large variety of hollow carbon architectures with desirable structural characters for their applications; for example, high-capacity anode for potassium-ion battery has been demonstrated with the multishelled hollow carbon nanospheres.

Microbial-Phosphorus-Enabled Synthesis of Phosphide Nanocomposites for Efficient Electrocatalysts.

Transition-metal phosphides have recently been identified as low-cost and efficient electrocatalysts that are highly active for the hydrogen evolution reaction. Unfortunately, to achieve a controlled phosphidation of nonprecious metals toward a desired nanostructure of metal phosphides, the synthetic processes usually turned complicated, high-cost, and even dangerous due to the reaction chemistry related to different phosphorus sources. It becomes even more challenging when considering the integration of those active metal phosphides with the structural engineering of their conductive matrix toward a favorable architecture for optimized catalytic performance. Herein, we identified that the biomass itself could act as an effective synthetic platform for the construction of supported metal phosphides by recovering its inner phosphorus upon reacting with transition-metals ions, forming well-dispersed, highly active nanoparticles of metal phosphides incorporated in the nanoporous carbon matrix, which promised high catalytic activity in the hydrogen evolution reaction. Our synthetic protocol not only provides a simple and effective strategy for the construction of a large variety of highly active nanoparticles of metal phosphides but also envisions new perspectives on an integrated utilization of the essential ingredients, particularly phosphorus, together with the innate architecture of the existing biomass for the creation of functional nanomaterials toward sustainable energy development.

General Synthetic Strategy for Hollow Hybrid Microspheres through a Progressive Inward Crystallization Process.

Hollow hybrid microspheres have found great potential in different areas, such as drug delivery, nanoreactors, photonics, and lithium-ion batteries. Here, we report a simple and scalable approach to construct high-quality hollow hybrid microspheres through a previously unexplored growth mechanism. Starting from uniform solid microspheres with low crystallinity, we identified that a hollowing process can happen through the progressive inward crystallization process initiated on the particle surface: the gradual encroachment of the crystallization frontline toward the core leads to the depletion of the center and forms the central cavity. We showed that such a synthetic platform was versatile and can be applicable for a large variety of materials. By using the production of Li4Ti5O12-carbon hollow hybrid microspheres as an example, we demonstrated that high-performance anode materials could be achieved through synthesis and structure control. We expect that our findings offer new perspectives in different areas ranging from materials chemistry, energy storage devices, catalysis, to drug delivery.

One-nanometer-precision control of Al(2)O(3) nanoshells through a solution-based synthesis route.

Forming uniform metal oxide nanocoatings is a well-known challenge in the construction of core-shell type nanomaterials. Herein, by using buffer solution as a specific reaction medium, we demonstrate the possibility to grow thin nanoshells of metal oxides, typically Al2 O3 , on different kinds of core materials, forming a uniform surface-coating layer with thicknesses achieving one nanometer precision. The application of this methodology for the surface modification of LiCoO2 shows that a thin nanoshell of Al2 O3 can be readily tuned on the surface for an optimized battery performance.

Integrated Surface Modulation of Ultrahigh Ni Cathode Materials for Improved Battery Performance.

Ni-rich layered cathodes with ultrahigh nickel content (≥90%), for example LiNi0.9 Co0.1 O2 (NC0.9), are promising for next-generation high-energy Li-ion batteries (LIBs), but face stability issues related to structural degradation and side reactions during the electrochemical process. Here, surface modulation is demonstrated by integrating a Li+ -conductive nanocoating and gradient lattice doping to stabilize the active cathode efficiently for extended cycles. Briefly, a wet-chemistry process is developed to deposit uniform ZrO(OH)2 nanoshells around Ni0.905 Co0.095 (OH)2 (NC0.9-OH) hydroxide precursors, followed by high temperature lithiation to create reinforced products featuring Zr doping in the crust lattice decorated with Li2 ZrO3 nanoparticles on the surface. It is identified that the Zr4+ infiltration reconstructed the surface lattice into favorable characters such as Li+ deficiency and Ni3+ reduction, which are effective to combat side reactions and suppress phase degradation and crack formation. This surface control is able to achieve an optimized balance between surface stabilization and charge transfer, resulting in an extraordinary capacity retention of 96.6% after 100 cycles at 1 C and an excellent rate capability of 148.8 mA h g-1 at 10 C. This study highlights the critical importance of integrated surface modulation for high stability of cathode materials in next-generation LIBs.

Construction of Li3PO4 nanoshells for the improved electrochemical performance of a Ni-rich cathode material.

A Li3PO4 nanocoating around a nickel-rich cathode material was successfully constructed via controlling the reaction between the electrode material and a preformed phosphorus-containing polymeric nanoshell; this not only effectively tackles the alkali residue challenge, but it also contributes to much-improved electrochemical performance being shown by a high-energy cathode.