Concentration properties of biopolymers via dead-end forward osmosis.

Extracellular polymeric substances (EPSs) in excess sludge of wastewater treatment plants are valuable biopolymers that can act as recovery materials. However, effectively concentrating EPSs consumes a significant amount of energy. This study employed novel energy-saving pressure-free dead-end forward osmosis (DEFO) technology to concentrate various biopolymers, including EPSs and model biopolymers [sodium alginate (SA), bovine serum albumin (BSA), and a mixture of both (denoted as BSA-SA)]. The feasibility of the DEFO technology was proven and the largest concentration ratios for these biopolymers were 94.8 % for EPSs, 97.1 % for SA, 97.8 % for BSA, and 98.4 % for BSA-SA solutions. An evaluation model was proposed, incorporating the FO membrane's water permeability coefficient and the concentrated substances' osmotic resistance, to describe biopolymers' concentration properties. Irrespective of biopolymer type, the water permeability coefficient decreased with increasing osmotic pressure, remained constant with increasing feed solution (FS) concentration, increased with increasing crossing velocity in the draw side, and showed little dependence on draw salt type. In the EPS DEFO concentration process, osmotic resistance was minimally impacted by osmotic pressure, FS concentration, and crossing velocity, and monovalent metal salts were proposed as draw solutes. The interaction between reverse diffusion metal cations and EPSs affected the structure of the concentrated substances on the FO membrane, thus changing the osmotic resistance in the DEFO process. These findings offer insights into the efficient concentration of biopolymers using DEFO.

Separation Techniques and Circular Economy.

Efficient separation techniques play an important role in the process of resource recovery, and these techniques include physical, chemical, physicochemical, and/or biological methods that are selected for their low cost and low energy consumption and for being free of secondary pollution [...].

Calcium Alginate Production through Forward Osmosis with Reverse Solute Diffusion and Mechanism Analysis.

Calcium alginate (Ca-Alg) is a novel target product for recovering alginate from aerobic granular sludge. A novel Ca-Alg production method was proposed herein where Ca-Alg was formed in a sodium alginate (SA) feed solution (FS) and concentrated via forward osmosis (FO) with Ca2+ reverse osmosis using a draw solution of CaCl2. An abnormal reverse solute diffusion was observed, with the average reverse solute flux (RSF) decreasing with increasing CaCl2 concentrations, while the average RSF increased with increasing alginate concentrations. The RSF of Ca2+ in FS decreased continuously as the FO progressed, using 1.0 g/L SA as the FS, while it increased initially and later decreased using 2.0 and 3.0 g/L SA as the FS. These results were attributed to the Ca-Alg recovery production (CARP) formed on the FO membrane surface on the feed side, and the percentage of Ca2+ in CARP to total Ca2+ reverse osmosis reached 36.28%. Scanning electron microscopy and energy dispersive spectroscopy also verified CARP existence and its Ca2+ content. The thin film composite FO membrane with a supporting polysulfone electrospinning nanofiber membrane layer showed high water flux and RSF of Ca2+, which was proposed as a novel FO membrane for Ca-Alg production via the FO process with Ca2+ reverse diffusion. Four mechanisms including molecular sieve role, electrification of colloids, osmotic pressure of ions in CARP, and FO membrane structure were proposed to control the Ca-Alg production. Thus, the results provide further insights into Ca-Alg production via FO along with Ca2+ reverse osmosis.

Recovery of Extracellular Polymeric Substances from Excess Sludge Using High-Flux Electrospun Nanofiber Membranes.

The recycling of extracellular polymeric substances (EPSs) from excess sludge in wastewater treatment plants has received increasing attention in recent years. Although membrane separation has great potential for use in EPS concentration and recovery, conventional membranes tend to exhibit low water flux and high energy consumption. Herein, electrospun nanofiber membranes (ENMs) were fabricated using polyvinylidene fluoride (PVDF) and used for the recovery of EPSs extracted from the excess sludge using the cation exchange resin (CER) method. The fabricated ENM containing 14 wt.% PVDF showed excellent properties, with a high average water flux (376.8 L/(m2·h)) and an excellent EPS recovery rate (94.1%) in the dead-end filtration of a 1.0 g/L EPS solution at 20 kPa. The ENMs displayed excellent mechanical strength, antifouling properties, and high reusability after five recycles. The filtration pressure had a negligible effect on the average EPS recovery rate and water flux. The novel dead-end filtration with an EPS filter cake on the ENM surface was effective in removing heavy-metal ions, with the removal rates of Pb2+, Cu2+, and Cr6+ being 89.5%, 73.5%, and 74.6%, respectively. These results indicate the potential of nanofiber membranes for use in effective concentration and recycling of EPSs via membrane separation.

News on alginate recovery by forward osmosis: Reverse solute diffusion is useful.

The water content in the recycled alginate solutions from aerobic granular sludge was nearly 100%. Forward osmosis (FO) has become an innovative dewatering technology. In this study, the FO concentration of sodium alginate (SA) was investigated using calcium chloride as a draw solute. The reverse solute flux (RSF) of calcium ions in FO had a beneficial effect, contrary to the findings of previous literature. The properties of the concentrated substances formed on the FO membrane on the feed side were analyzed by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy, verifying that calcium alginate (Ca-Alg), which can be used as a recycled material, was formed on the FO membrane on the feed side owing to the interaction between SA and permeable calcium ions. Water flux increased significantly with the increase in calcium chloride concentration, while the concentration of SA had little influence on the water flux in FO. Based on this discovery, we propose a novel method for the concentration and recovery of alginate, in which the RSF of calcium ions is utilized for recovering Ca-Alg by FO, with calcium chloride as a draw solute.

Recovery of polymeric substances from excess sludge: Surfactant-enhanced ultrasonic extraction and properties analysis.

The recovery of polymeric substances from excess sludge is gaining significant research interest in future wastewater treatment technologies. We present a surfactant-enhanced ultrasonic method to extract mixed polymeric substances with typical functional groups from excess sludge. Four potential reasons were revealed for the higher efficiency upon ultrasonication with surfactant: low surface tension, damage of non-covalent bonds between extracellular polymeric substances and cells, enhanced dissolution of polymeric substances, and release of intracellular polymeric substances caused by cell lysis. The increase in extraction efficiency after the addition of cetyltrimethylammonium bromide and sodium dodecyl sulfate reached the maximum of 76.5% and 53.1%, respectively. The contents of polysaccharides, proteins, and DNA were approximately 50% of the total polymeric substances, and the content of protein was higher than that of polysaccharide; the concentration change of the surfactant had a minimal effect on these contents. For the polymeric substances extracted via ultrasonication with surfactant, the size was smaller than that for the non-surfactant extraction; moreover, the contents of metals decreased significantly (Al: 0.18% → 0%; Na: 0.15% → 0%; Ca: 0.24% → 0.11%), which was probably caused by the interaction between the surfactant and metal ions in the excess sludge. The surfactant had a negligible effect on the properties of polymeric substances, adsorption capacity of polymeric substances for heavy metal ions, and dewatering performance of sludge. The recycled polymeric substances may be used as a substitute for commercial adsorbents of heavy metal ions. Thus, the obtained results provide further insight into the recovery of polymeric substances from excess sludge via the surfactant-enhanced ultrasonic method.

Separation of trace pharmaceuticals individually and in combination via forward osmosis.

With a high rejection coefficient for trace pharmaceuticals and personal care products (PPCPs), forward osmosis (FO) membrane separation has become a cutting-edge technology in water treatment owing to its low energy consumption and low membrane fouling. Wastewater contains many types of PPCPs, and one pharmaceutical molecule affects the separation behaviors of other pharmaceuticals in FO. Therefore, simultaneous FO of multiple PPCPs needs to be investigated. In this study, the separation behaviors of four trace pharmaceuticals (ciprofloxacin (CIP), sulfamethoxazole (SMX), acetaminophen (ACP), carbamazepine (CBZ)), individually (termed "single pharmaceuticals") and in combination (termed "binary pharmaceuticals" as two pharmaceuticals were studied simultaneously), during FO were investigated at trace concentrations using ultra-high performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). The results showed that for single pharmaceuticals, the molecular sieve dominates their retention rate-the retention rate increases with increasing Stokes radius of the molecules (29.1 â†’ 94.8% for 0.35 â†’ 0.47 nm). For binary pharmaceuticals, the retention rates of both pharmaceuticals without charge decrease with increasing total molecule number (for ACP + CBZ, 31.4 â†’ 52.1% (ACP), 75.1 â†’ 83.0% (CBZ)). Negatively charged pharmaceuticals are mutually exclusive with the negatively charged FO membrane, resulting in the increase of the retention rate of pharmaceuticals (83.1 â†’ 90.1% (CIP) when CIP + ACP â†’ CIP + SMX). In the presence of a positively charged pharmaceutical, the retention rate of negatively charged pharmaceuticals decreases (85.7 â†’ 80.4% (SMX) when SMX + ACP â†’ SMX + CIP) because the positively charged pharmaceutical neutralizes the negative charge on the FO membrane surface, resulting in the weakening of electrostatic repulsion between the negatively charged pharmaceutical and FO membrane surface. The positively charged molecule attracts the negatively charged molecule, forming a couple of molecules with larger molecule weight and increasing the retention rate of the pharmaceuticals (80.4 â†’ 88.2% (SMX) when pH = 7 â†’ 5 for SMX + CIP). The results suggest that the interactions between pharmaceuticals cannot be ignored in the process of removing PPCPs by FO.