RESUMO
OBJECTIVE: The purpose of this study was to prepare the positively charged chitosan (CS)- or hydroxypropyl trimethyl ammonium chloride chitosan (HACC)-modified solid lipid nanoparticles (SLNs) loading docetaxel (DTX), and to evaluate their properties in vitro and in vivo. METHODS: The DTX-loaded SLNs (DTX-SLNs) were prepared through an emulsion solvent evaporation method and further modified with CS or HACC (CS-DTX-SLNs or HACC-DTX-SLNs) via noncovalent interactions. The gastrointestinal (GI) stability, dissolution rate, physicochemical properties and cytotoxicities of SLNs were investigated. In addition, the GI mucosa irritation and oral bioavailability of SLNs were also evaluated in rats. RESULTS: The HACC-DTX-SLNs were highly stable in simulated gastric and intestinal fluids (SGF and SIF). By contrast, the CS-DTX-SLNs were less stable in SIF than in SGF. The drug dissolution remarkably increased when DTX was incorporated into the SLNs, which may be attributed to the change in the crystallinity of DTX and some molecular interactions that occurred between DTX and the carriers. The SLNs showed low toxicity in Caco-2 cells and no GI mucosa irritations were observed in rats. A 2.45-fold increase in the area under the curve of DTX was found in the HACC-DTX-SLN group compared with the DTX group after the modified SLNs were orally administered to rats. However, the oral absorption of DTX-SLN or CS-DTX-SLN group showed no significant difference compared with that of DTX group. CONCLUSIONS: The positively charged HACC-DTX-SLNs with a stable particle size could provide the enhanced oral bioavailability of DTX in rats.
Assuntos
Quitosana/química , Quitosana/metabolismo , Trato Gastrointestinal/metabolismo , Lipídeos/química , Nanopartículas/química , Taxoides/química , Taxoides/metabolismo , Administração Oral , Animais , Disponibilidade Biológica , Líquidos Corporais/metabolismo , Células CACO-2 , Docetaxel , Portadores de Fármacos/química , Liberação Controlada de Fármacos/efeitos dos fármacos , Emulsões/química , Emulsões/metabolismo , Humanos , Mucosa Intestinal/metabolismo , Masculino , Tamanho da Partícula , Ratos , Ratos Sprague-Dawley , SolubilidadeRESUMO
Solid lipid nanoparticles (SLNs) are one of the most promising nanocarriers to increase the oral absorption of drugs with poor solubility and low permeability. However, the absorption mechanism of SLNs remains incomplete and thus requires further careful consideration. In this study, positively charged chitosan (CS) modified SLNs or hydroxypropyl trimethylammonium chloride chitosan (HACC) modified SLNs were designed and their absorption mechanisms were fully clarified to improve the oral absorption of docetaxel (DTX). The HACC-DTX-SLNs showed the highest cellular uptake in Caco-2 cell monolayer; the transport efficacy in the follicle-associated epithelium cell monolayer was higher than that in the Caco-2 cell monolayer. The CS- or HACC-modified SLNs could reversibly regulate the transepithelial electrical resistance and the expressions of tight junction (TJ) associated proteins, such as claudin-1, occludin, and zonula occludens-1. The uptake of HACC-DTX-SLNs through Peyer's patches was higher than that of the normal tissue of the small intestine in rats. The enhanced absorption mechanisms of HACC-DTX-SLNs were mainly related to the caveola-mediated endocytosis, M cell phagocytosis, and reversible TJ opening.
Assuntos
Mucosa Intestinal/metabolismo , Lipídeos/química , Nanopartículas/química , Taxoides/metabolismo , Animais , Células CACO-2 , Quitosana/química , Docetaxel , Humanos , Masculino , Microscopia Eletrônica de Transmissão , Ratos , Ratos Sprague-DawleyRESUMO
In this work, we developed a sildenafil citrate (SC)-loaded polyvinyl alcohol (PVA)/sodium alginate (ALG-Na) based orodispersible film (ODF) using a solvent casting method. Formulation factors such as the type and amount of plasticizers and disintegrants were optimized on the basis of characteristics of blank ODF, including the disintegration time, elastic modulus (EM) and percentage of elongation (E%). SC-loaded ODF with a loading capacity up to 25 mg in an area of 6 cm2 was prepared and evaluated in terms of mechanical properties, disintegration time and dissolution rate. The surface morphology of ODF was visualized under a scanning electron microscope (SEM). The physicochemical properties of ODF were investigated using X-ray diffraction (XRD), differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FT-IR). The blank ODF composed of PVA, polyethylene glycol 400 (PEG 400) and ALG-Na (20:5:2, w/w) had a remarkably short disintegration time of about 20 s. However, the loading of drug extended the disintegration time (100 s) of ODF, while it still maintained satisfactory mechanical properties. SC was homogenously dispersed throughout the films and the crystalline form of drug changed, with strong hydrogen bonding between the drug and carriers. The PVA/ALG-Na based ODF containing SC prepared by the simple solvent casting method might be an alternative to conventional SC tablets for the treatment of male erectile dysfunction.
Assuntos
Alginatos/química , Excipientes/química , Inibidores de Fosfodiesterase/administração & dosagem , Piperazinas/administração & dosagem , Álcool de Polivinil/química , Sulfonas/administração & dosagem , Varredura Diferencial de Calorimetria , Química Farmacêutica , Cromatografia Líquida de Alta Pressão , Formas de Dosagem , Microscopia Eletrônica de Varredura , Modelos Moleculares , Plastificantes , Purinas/administração & dosagem , Citrato de Sildenafila , Solubilidade , Solventes , Espectroscopia de Infravermelho com Transformada de Fourier , Difração de Raios XRESUMO
This study was performed to investigate the in vitro release characteristics of levodropropizine (LDP) from novel dual-coated sustained release (SR) pellets, and evaluate the pharmacokinetics of a novel controlled release (CR) preparation composed of the dual-coated SR pellets and immediate release (IR) LDP pellets. The dual-coated SR pellets composed of a drug-loaded nonpareil core, a sub-coating layer (HPMC 6cps) and an SR-coating layer (Aquacoat® ECD, Eudragit® RS 30D or Kollicoat® SR 30D) were prepared by a bottom-spray fluidized bed-coating method. The drug release from the dual-coated SR pellets coated with Aquacoat® ECD followed a zero-order profile in water, and the drug release was not affected by the coating level of the sub-coating layer and stable under the accelerated storage condition (40 °C, 75% RH) for 6 months. The CR preparation showed significantly decreased values of maximum drug concentration (Cmax) and elimination rate (K) than the reference product (LEVOTUS® SYR) but the similar bioavailability (F = 95.43%). The novel CR preparation presents promising delivery of LDP with an immediate and sustained release manner, with similar clinical effect as the commercial IR product.
Assuntos
Antitussígenos/administração & dosagem , Preparações de Ação Retardada/química , Propilenoglicóis/administração & dosagem , Adulto , Antitussígenos/farmacocinética , Celulose/análogos & derivados , Celulose/química , Humanos , Masculino , Ácidos Polimetacrílicos/química , Polivinil/química , Propilenoglicóis/farmacocinéticaRESUMO
Valsartan (VAL) shows poor oral bioavailability mainly as a result of its low water solubility at low pH. This study is designed to investigate the dissolution properties and physicochemical characteristics of novel PVP-based solid dispersions (SDs) containing VAL. The SDs were prepared with polyvinylpyrrolidone (PVP-K30) as a hydrophilic polymer, sodium hydroxide (NaOH) as an alkalizer, and poloxamer 188 (F68) as a surfactant, without using any organic solvents by a freeze-drying method. The dissolution study was carried out and the physicochemical properties of SDs were also characterized by using differential scanning calorimetry (DSC), fourier transform-infrared (FT-IR) spectroscopy, X-ray diffractometry (XRD) and scanning electron microscopy (SEM). The dissolution rates of SDs were significantly improved at pH1.2 and pH6.8 compared to that of pure drug. The results of physicochemical properties suggested that some interactions between VAL and carriers had occurred in the molecular level and the drug presented in the SDs was amorphous. It was concluded that the novel PVP-based SDs has been successfully prepared by a freeze-drying method, resulting in significant dissolution improvement of VAL.
Assuntos
Povidona/química , Tetrazóis/química , Valina/análogos & derivados , Liofilização , Solubilidade , Espectroscopia de Infravermelho com Transformada de Fourier , Valina/química , Valsartana , Difração de Raios XRESUMO
Background: The commercial docetaxel (DTX) formulation causes severe side effects due to polysorbate 80 and ethanol. Novel surfactant-free nanoparticle (NP) systems are needed to improve bioavailability and reduce side effects. However, controlling the particle size and stability of NPs and improving the batch-to-batch variation are the major challenges. Methods: DTX-loaded bovine serum albumin nanoparticles (DTX-BSA-NPs) were prepared by a novel thermal-driven self-assembly/microfluidic technology. Single-factor analysis and orthogonal test were conducted to obtain the optimal formulation of DTX-BSA-NPs in terms of particle size, encapsulation efficiency (EE), and drug loading (DL). The effects of oil/water flow rate and pump pressure on the particle size, EE, and DL were investigated to optimize the preparation process of DTX-BSA-NPs. The drug release, physicochemical properties, stability, and pharmacokinetics of NPs were evaluated. Results: The optimized DTX-BSA-NPs were uniform, with a particle size of 118.30 nm, EE of 89.04%, and DL of 8.27%. They showed a sustained release of 70% over 96 hours and an increased stability. There were some interactions between the drug and excipients in DTX-BSA-NPs. The half-life, mean residence time, and area under the curve (AUC) of DTX-BSA-NPs increased, but plasma clearance decreased when compared with DTX. Conclusion: The thermal-driven self-assembly/microfluidic combination method effectively produces BSA-based NPs that improve the bioavailability and stability of DTX, offering a promising alternative to traditional formulations.
Assuntos
Disponibilidade Biológica , Docetaxel , Estabilidade de Medicamentos , Nanopartículas , Tamanho da Partícula , Soroalbumina Bovina , Docetaxel/farmacocinética , Docetaxel/química , Docetaxel/administração & dosagem , Animais , Soroalbumina Bovina/química , Soroalbumina Bovina/farmacocinética , Soroalbumina Bovina/administração & dosagem , Nanopartículas/química , Taxoides/farmacocinética , Taxoides/química , Taxoides/administração & dosagem , Antineoplásicos/farmacocinética , Antineoplásicos/química , Antineoplásicos/administração & dosagem , Liberação Controlada de Fármacos , Portadores de Fármacos/química , Portadores de Fármacos/farmacocinética , Ratos Sprague-Dawley , Masculino , Composição de Medicamentos/métodos , RatosRESUMO
PURPOSE: Reproducibility and scale-up production of microspheres through spray drying present significant challenges. In this study, biodegradable microspheres of Triamcinolone Acetonide Acetate (TAA) were prepared using a novel static mixing method by employing poly( lactic-co-glycolic acid) (PLGA) as the sustained-release carrier. METHODS: TAA-loaded microspheres (TAA-MSs) were prepared using a static mixing technique. The PLGA concentration, polyvinyl alcohol concentration (PVA), phase ratio of oil/water, and phase ratio of water/solidification were optimized in terms of the particle size, drug loading (DL), and encapsulation efficiency (EE) of TAA-MSs. The morphology of TAA-MSs was examined using Scanning Electron Microscopy (SEM), while the physicochemical properties were evaluated through X-ray diffraction (XRD), Differential Scanning Calorimetry (DSC), and Fourier Transform Infrared Spectroscopy (FT-IR). The in vitro release of TAA-MSs was compared to that of the pure drug (TAA) using a water-bath vibration method in the medium of pH 7.4 at 37°C. RESULTS: The formulation composition and preparation condition for the preparation of TAA-MSs were optimized as follows: the PLGA concentration was 1%, the phase ratio of oil(dichloromethane) /water (PVA solution) was 1:3, the phase ratio of water (PVA solution)/solidification was 1:2. The optimized TAA-MSs displayed spherical particles with a size range of 30-70 µm, and DL and EE values of 27.09% and 98.67%, respectively. Moreover, the drug-loaded microspheres exhibited a significant, sustained release, with 20% of the drug released over a period of 28 days. The XRD result indicated that the crystalline form of TAA in microspheres had been partly converted into the amorphous form. DSC and FT-IR results revealed that some interactions between TAA and PLGA occurred, indicating that the drug was effectively encapsulated into PLGA microspheres. CONCLUSION: TAA-loaded PLGA microspheres have been successfully prepared via the static mixing technique with enhanced EE and sustained-release manner.
RESUMO
OBJECTIVE: The purpose of this study was to develop hydroxypropylmethylcellulose (HPMC)-based sustained release (SR) tablets for tolterodine tartrate with a low drug release variation. METHODS: The SR tablets were prepared by formulating a combination of different grades of HPMC as the gelling agents. The comparative dissolution study for the HPMC-based SR tablet as a test and Detrusitol SR capsule as a reference was carried out, and the bioequivalence study of the two products was also conducted in human volunteers. RESULTS: The amount of HPMC, the grade of HPMC and the combination ratio of different grades of HPMC had remarkable effects on drug release from the SR tablets. Both the test and reference products had no significant difference in terms of comparative dissolution patterns in four different media (f2 > 50). Furthermore, the dissolution method and rotation speed showed no effects on the drug release from the two products. The 90% confidence intervals of the AUC(0-36) and C(max) ratios for the test and reference products were within the acceptable bioequivalence intervals of log0.8-log1.25. CONCLUSIONS: A HPMC-based SR tablet for tolterodine tartrate with a low release variation was successfully developed, which was bioequivalent to Detrusitol® SR capsule.
Assuntos
Compostos Benzidrílicos/administração & dosagem , Cresóis/administração & dosagem , Excipientes/química , Metilcelulose/análogos & derivados , Antagonistas Muscarínicos/administração & dosagem , Fenilpropanolamina/administração & dosagem , Agentes Urológicos/administração & dosagem , Adulto , Compostos Benzidrílicos/sangue , Compostos Benzidrílicos/química , Compostos Benzidrílicos/farmacocinética , Cápsulas , Fenômenos Químicos , Cresóis/sangue , Cresóis/química , Cresóis/farmacocinética , Estudos Cross-Over , Preparações de Ação Retardada/administração & dosagem , Preparações de Ação Retardada/análise , Preparações de Ação Retardada/química , Preparações de Ação Retardada/farmacocinética , Composição de Medicamentos , Géis , Meia-Vida , Humanos , Concentração de Íons de Hidrogênio , Derivados da Hipromelose , Masculino , Metilcelulose/química , Antagonistas Muscarínicos/sangue , Antagonistas Muscarínicos/química , Antagonistas Muscarínicos/farmacocinética , Fenilpropanolamina/sangue , Fenilpropanolamina/química , Fenilpropanolamina/farmacocinética , Solubilidade , Propriedades de Superfície , Comprimidos , Equivalência Terapêutica , Tartarato de Tolterodina , Agentes Urológicos/sangue , Agentes Urológicos/química , Agentes Urológicos/farmacocinética , Viscosidade , Adulto JovemRESUMO
The aim of this study was to improve the stability and cover the unpleasant odor of valerian oil by preparation of beta-cyclodextrin inclusion complex. The preparation method was established based on the yield of inclusion complex and entrapment efficiency of valerian volatile oil. After that, the formulation and processing parameters were optimized by uniform design table. The formations of inclusion complex were validated by DSC and X-RD method. The stability of valerian oil beta-cyclodextrin inclusion was studied under stressed conditions. In conclusion, relatively high yield of inclusion complex and entrapment efficiency were obtained by saturated solution-ultrasonication method. Inclusion complex yield and entrapment efficiency of the valerian oil were (84.78 +/- 3.23)% and (86.23 +/- 2.48)%, which were prepared under the optimized conditions, respectively. The results of DSC and X-RD were indicated the formation of inclusion complex. The stability of test showed that the valerian oil-beta-cyclodextrin inclusion complex was improved significantly.
Assuntos
Óleos Voláteis/química , Valeriana/química , beta-Ciclodextrinas/química , Estabilidade de Medicamentos , Medicamentos de Ervas Chinesas/química , OdorantesRESUMO
To prepare and evaluate dry powder inhalation (DPI) of extraction of Trollius chinensis Bunge (TCB). Orthodox design was employed to optimize the parameters of spray drying to prepare micronized TCB powder, the DPI was prepared by mixing micronized TCB powder and lactose. The results showed that the fine particle fraction (FPF) and emitted dose (ED) of micronized TCB powder was (21.07 +/- 1.74)%, (75.31 +/- 21.05)%, respectively, and for DPI was (56.4 +/- 2.2)%, (95.9 +/- 3.0)%, respectively. Therefore, the prepared DPI meeted requirements in the Chinese Pharmacopeia, indicating a good application prospect.
Assuntos
Extratos Vegetais/administração & dosagem , Ranunculaceae , Administração por Inalação , Inaladores de Pó Seco , Excipientes , Extratos Vegetais/isolamento & purificação , PósRESUMO
PURPOSE: The aim of the study is to prepare entecavir (ETV)-loaded orodispersible films (ODFs) using polyvinyl alcohol (PVA)/polyethylene glycol (PEG) graft copolymer (Kollicoat® IR) as a film-forming agent, and further to evaluate the dissolution rate, mechanical and physicochemical properties of films. METHODS: ETV-ODFs were prepared by a solvent casting method. The amount of film-forming agent, plasticizer, and disintegrating agent was optimized in terms of the appearance, thickness, disintegration time and mechanical properties of ODFs. The compatibility between the drug and each excipient was conducted under high temperature (60 °C), high humidity (RH 92.5%), and strong light (4500 Lx) for 10 days. The dissolution study of optimal ODFs compared with the original commercial tablet (Baraclude®) was performed using a paddle method in pH 1.0, pH 4.5, pH 6.8, and pH 7.4 media at 37 °C. The morphology of ODFs was observed via scanning electron microscopy (SEM). The mechanical properties such as tensile strength (TS), elastic modulus (EM), and percentage elongation (E%) of ODFs were evaluated using the universal testing machine. The physicochemical properties of ODFs investigated using X-ray diffraction (XRD), differential scanning calorimetry (DSC), and Fourier transform infrared spectroscopy (FT-IR). RESULTS: The related substances were less than 0.5% under high temperature, high humidity, and strong light for 10 days when ETV was mixed with excipients. The optimal formulation of ODFs was set as the quality ratio of Kollicoat® IR, glycerol, sodium alginate (ALG-Na): TiO2: MCC+CMC-Na: ETV was 60:9:12:1:1:1. The drug-loaded ODFs were white and translucent with excellent stripping property. The thickness, disintegration time, EM, TS, and E% were 103.33±7.02 µm, 25.31±1.95 s, 25.34±8.69 Mpa, 2.14±0.26 Mpa, and 65.45±19.41 %, respectively. The cumulative drug release from ODFs was more than 90% in four different media at 10 min. The SEM showed that the drug was highly dispersible in ODFs, and the XRD, DSC, and FT-IR results showed that there occurred some interactions between the drug and excipients. CONCLUSION: In conclusion, the developed ETV-loaded ODFs showed relatively short disintegration time, rapid drug dissolution, and excellent mechanical properties. This might be an alternative to conventional ETV Tablets for the treatment of chronic hepatitis B.
RESUMO
The aim of this study was to design a novel matrix tablet with enhanced dissolution and pH-independent controlled release of sildenafil citrate (SIL), a drug with pH-dependent solubility, by using solid dispersions (SDs) and polyelectrostatic interactions. SIL-loaded SDs were prepared using various polymeric carriers such as poloxamer 188, poloxamer 407, Soluplus®, polyvinylpyrrolidone (PVP) K 12, and PVP K 17 by the solvent evaporation method. Among these polymers, Soluplus® was found to be the most effective in SDs for enhancing the drug dissolution over 6 h in pH 6.8 intestinal fluid. SIL was well dispersed in Soluplus®-based SDs in an amorphous form. When the Soluplus®-based SDs were added in the tablet containing positively charged chitosan and negatively charged Eudragit® L100, the drug release rate was further modulated in a controlled manner. The charge density of the tablet was higher at pH 6.8 than at pH 1.2 due to the polyelectrostatic interaction between chitosan and Eudragit® L100. This interaction could provide a pH-independent controlled release of SIL. Our study demonstrates that a combinatory approach of Soluplus®-based SDs and polyelectrostatic interactions can improve the dissolution and pH-independent release performance of SIL. This approach could be a promising pharmaceutical strategy to design a matrix tablet of poorly water-soluble drugs for the enhanced bioavailability.
RESUMO
PURPOSE: Traditional dosage forms of granisetron (GRN) decrease patient compliance associated with repeated drug administration because of the short half-life of the drug. METHODS: In this study, novel GRN-loaded Polylactic-co-glycolic Acid (PLGA) sustained-release microspheres were prepared for the first time via a dropping-in-liquid emulsification technique. The effects of various factors, such as pH of the outer phase, Tween 80, Polyvinyl Alcohol (PVA) concentrations, and hardening process, on the Encapsulation Efficiency (EE), Drug Loading (DL), and particle size of microspheres were extensively studied. The physicochemical properties, including drug release, surface morphology, crystallinity, thermal changes, and molecular interactions, were also studied. RESULTS: GRN has a pH-dependent solubility and it exhibits a remarkably high solubility under acidic condition. The EE of the alkaline medium (pH 8) was higher than that of the acidic medium (pH 4.0). EE and DL decreased in the presence of Tween 80 in the outer phase, whereas EE significantly increased during hardening. The particle size of microspheres was not affected by PVA and Tween 80 concentrations, but it was influenced by PVA volume and hardening. X-ray diffraction and differential scanning calorimetry results showed that the physical state of the drug changed from a crystalline form to an amorphous form, thereby confirming that the drug was encapsulated into the PLGA matrix. Fourier transform-infrared spectroscopy confirmed that some molecular interactions occurred between the drug and the polymer. GRN-loaded PLGA microspheres showed sustained release profiles of over 90% on week 3. CONCLUSION: GRN-loaded PLGA microspheres with sustained-release were successfully prepared, and they exhibited a relatively high EE without Tween 80 as an emulsifier and with the hardening process.
Assuntos
Ácido Láctico , Ácido Poliglicólico , Preparações de Ação Retardada/química , Glicolatos , Glicóis , Humanos , Ácido Láctico/química , Microesferas , Tamanho da Partícula , Ácido Poliglicólico/química , Copolímero de Ácido Poliláctico e Ácido Poliglicólico , PolissorbatosRESUMO
OBJECTIVE: This study aimed to prepare combretastatin A4 (CA4)-loaded nanoparticles (CA4 NPs) using poly(lactic-co-glycolic acid) (PLGA) and soybean lecithin (Lipoid S100) as carriers, and further evaluate the physicochemical properties and cytotoxicities of CA4 NPs against cancer cells. METHODS: CA4 NPs were prepared using a solvent evaporation technique. The effects of formulations on CA4 NPs were investigated in terms of particle size, zeta potential, encapsulation efficacy, and drug loading. The physicochemical properties of CA4 NPs were characterized using transmission electron microscopy, X-ray powder diffraction, differential scanning calorimetry, and Fourier transform infrared spectra. The drug release from CA4NPs was performed using a dialysis method. In addition, the cytotoxicity of CA4NPs against human alveolar basal epithelial (A549) cells was also evaluated. RESULTS: CA4 NPs prepared with a low organic/water phase ratio (1:20) and high drug/PLGA mass ratio (1:2.5) exhibited a uniform hydrodynamic particle size of 142 nm, the zeta potential of -1.66 mV, and encapsulation efficacy and drug loading of 92.1% and 28.3%, respectively. CA4 NPs showed a significantly higher release rate than pure CA4 in pH 7.4 phosphate-buffered solution with 0.5% Tween 80. It was found that the drug molecules could change from the crystal state to an amorphous form when loaded into the PLGA/Lipoid S100 matrix, and some molecular interactions could also occur between the drug and PLGA. Importantly, CA4 NPs showed a remarkably higher antiproliferation activity against A549 cancer cells compared to pure CA4. CONCLUSION: These results suggested the promising potential of PLGA/Lipoid S100 nanoparticles as the drug delivery system of CA4 for effective cancer therapy.
Assuntos
Lecitinas , Nanopartículas , Portadores de Fármacos/química , Liberação Controlada de Fármacos , Glicolatos , Glicóis , Humanos , Nanopartículas/química , Tamanho da Partícula , Glycine max , EstilbenosRESUMO
The purpose of this study was to develop a once-daily, bilayer matrix tablet with immediate (IR) and sustained release (SR) layers of poorly water-soluble and absorption site dependent rebamipide (RBM) to substitute three times a day IR tablet. Owing to the pH-dependent poor water solubility of RBM in low pH condition, salt-caged nanosuspensions (NSPs) consisting of RBM and poloxamer 407 (POX 407) or poloxamer 188 (POX 188) were prepared using an acid-base neutralization method to increase the dissolution rate, which was subsequently applied to the immediate-release (IR) layer. Polyethylene oxide (PEO) with different molecular weights (PEO 100,000 and PEO 5,000,000) and hydroxypropyl methylcellulose 4000 (HPMC 4000) were then investigated as SR agents to incorporate into the SR layer with pure RBM via wet granulation method. The dissolution profile of the optimized bilayer tablet having 50% IR and 50% SR layer of 300 mg RBM showed that the IR layer could rapidly disintegrate in pH 1.2 buffer solution within 2 h, reaching 50% of drug release from the tablet, followed by an extended drug release from the SR layer in pH 6.8 buffer over 24 h. An in vivo pharmacokinetic study was carried out in beagle dogs to compare the optimal formulation (300 mg RBM bilayer tablet) and the commercial tablet (Mucosta® 100 mg) as a reference. Unexpectedly, despite enhanced dissolution rate in a controlled manner, a designed bilayer tablet had no dose- and dosage form dependent in vivo bioavailability in beagle dogs as compared with IR 100 mg RBM reference tablet. It was evident that solubility in low pH condition, gastric residence time and absorption site of RBM should be carefully considered for designing specific SR or gastroretentive dosage form to improve therapeutic outcomes.
Assuntos
Poloxâmero , Água , Alanina/análogos & derivados , Animais , Disponibilidade Biológica , Preparações de Ação Retardada/química , Cães , Quinolonas , Solubilidade , ComprimidosRESUMO
In this study, the electrostatic molecular effect of differently charged surfactants on the solubilization capacity and physicochemical properties of salt-caged nanosuspensions (NSPs) containing poorly water-soluble drug was investigated. Anionic rebamipide (RBM) was chosen as a model drug because of its poor water solubility in low pH condition and ionizable acidic forms. Negatively charged sodium lauryl sulfate (SLS) and positively charged cetyltrimethylammonium bromide (CTAB) were selected as surfactants for the preparation of NSPs or in the dissolution medium. Salt-caged NSPs surrounded by NaCl were prepared by the HCl-NaOH neutralization method in the presence of poloxamer 407. Interestingly, the addition of positively charged CTAB in the preparation process or the dissolution media could interfere with the solubilization capacity of salt-caged NSPs containing a negatively charged drug via intermolecular electrostatic attraction. In the presence of positively charged CTAB, the salt-caged NSP was disordered in structure via electrostatic attractive interaction with partially ionizable anionic RBM resulting in changes in the physicochemical properties of the salt-caged NSP such as low drug content, increased particle size, decreased dissolution rate, and the formation of water-insoluble precipitates with rough and irregular crystals. This inhibitory effect of CTAB on the dissolution rate of pure RBM and the salt-caged NSP in pH 6.8 intestinal fluid was pronounced in a concentration-dependent manner mainly owing to the formation of precipitates, so-called poorly soluble complexes. When the salt-caged NSP (F1) was dissolved in DW containing CTAB, the dissolution rate decreased more significantly, dissolving less than 20% within 2 h. Depending on the surfactant charges, the charge density and the initial potential were varied during the dissolution of NSPs in deionized water (DW). In contrast, the negatively charged SLS did not significantly change the physicochemical properties of the salt-caged NSP. For example, the dissolution rate of the salt-caged NSP containing SLS in DW or pH 1.2 gastric fluid remained over 90% for 2 h. Surfactants for the formulation or dissolution media should be chosen carefully because of their effect on the physicochemical properties and solubilization capacity of salt-caged NSPs containing poorly water-soluble and ionizable drugs via electrostatic molecular interactions.
Assuntos
Tensoativos , Água , Alanina/análogos & derivados , Cetrimônio , Concentração de Íons de Hidrogênio , Quinolonas , Cloreto de Sódio , Solubilidade , Eletricidade Estática , Tensoativos/química , Água/químicaRESUMO
The essential challenge of gene therapy is to develop safe and efficient vectors that escort genes to target sites. However, due to the cumbersome workflow of gene transfection into cells, successive gene loss occurs. This leads to considerable reductions in nuclear gene uptake, eventually causing low gene expression. Herein, we designed a gene vector named CA3S2 (C: N,N'-cystamine-bis-acrylamide [CBA], A: agmatine dihydrochloride [Agm], S: 4-(2-aminoethyl) benzenesulfonamide [ABS]) with excellent gene transfection ability. This vector can promote gene delivery to the nucleus via enhanced endoplasmic reticulum (ER) targeting through integrating and streamlining of the complex intracellular pathway. Briefly, ABS endowed CA3S2/DNA nanoparticles with not only a natural ER-targeting tendency attributed to the caveolae-mediated pathway but also direct receptor-binding capacity on the ER surface. Agm enabled CA3S2 to enhance lysosomal escape and nuclear uptake ability. The gene delivery efficiency of CA3S2 was significantly better than that of polyethyleneimine 25K (PEI 25K). Therefore, CA3S2 is a promising gene carrier, and the ER-targeting strategy involving intracellular pathway integration and streamlining has potential for gene therapy.
Assuntos
Técnicas de Transferência de Genes , Terapia Genética , Núcleo Celular/metabolismo , Polietilenoimina/metabolismo , TransfecçãoRESUMO
Purpose: Novel collagenase IV (ColIV) and clusterin (CLU)-modified polycaprolactone-polyethylene glycol (PCL-PEG) nanoparticles that load doxorubicin (DOX) were designed and fully evaluated in vitro and in vivo. Methods: PCL-PEG-ColIV was synthesized by linking PCL-PEG and ColIV through a carbodiimide method. DOX-loaded nanoparticles (DOX-PCL-PEG-ColIV) were self-assembly prepared, followed by noncovalently adsorbing CLU on the DOX-PCL-PEG-ColIV surface to obtain DOX-PCL-PEG-ColIV /CLU nanoparticles, which can penetrate through the tumor extracellular matrix (ECM) and inhibit phagocytosis by macrophage. The physicochemical properties of nanoparticles were characterized. The cellular uptake and antiphagocytosis ability of nanoparticles in MCF-7 tumor cells and RAW264.7 cells were investigated. The penetration ability of nanoparticles was individually evaluated in the two-dimensional (2D) and three-dimensional (3D) ECM models. The tissue distribution and antitumor effect of nanoparticles were evaluated in MCF-7 cell-bearing nude mice. Results: Compared with DOX-PCL-PEG-COOH nanoparticles, DOX-PCL-PEG-ColIV/CLU nanoparticles could effectively overcome the phagocytosis by RAW264.7 and showed excellent cellular uptake in MCF-7 cells. In addition, they showed remarkable penetration ability through the 2D and 3D ECM models. DOX-PCL-PEG-ColIV/CLU nanoparticles significantly reduced the drug distribution in the liver and spleen and enhanced the drug accumulation in tumor tissue compared with DOX-PCL-PEG-COOH or DOX-PCL-PEG-ColIV nanoparticles. DOX-PCL-PEG-ColIV/CLU nanoparticles showed remarkable antitumor effect but did not cause severe pathological damages in the main tissues, including the heart, liver, spleen, lung, and kidney. Conclusion: Novel ColIV and CLU-modified PCL-PEG nanoparticles showed excellent cellular uptake, ECM penetration, antiphagocytosis, and antitumor effects both in vitro and in vivo.
Assuntos
Neoplasias da Mama/tratamento farmacológico , Clusterina/metabolismo , Colagenases/metabolismo , Doxorrubicina/farmacologia , Nanopartículas/administração & dosagem , Poliésteres/química , Polietilenoglicóis/química , Animais , Antibióticos Antineoplásicos/farmacologia , Apoptose , Neoplasias da Mama/metabolismo , Neoplasias da Mama/patologia , Proliferação de Células , Clusterina/genética , Colagenases/genética , Portadores de Fármacos/química , Feminino , Humanos , Camundongos , Camundongos Nus , Micelas , Nanopartículas/química , Células Tumorais Cultivadas , Ensaios Antitumorais Modelo de XenoenxertoRESUMO
Nanoparticle-protein interactions under conditions mimicking physiology determine how nanoparticles (NPs) will behave inside blood vessels and, therefore, the overall outcome of the drug-delivery system. Here, for the first time, we explore the effects of bio-mimicking shear stress and protein corona conditions on novel active targeting of clickable fattigation nanoparticles (NPs) for cancer therapy. Active targeting dibenzocyclooctyne-functionalized biocompatible gelatin-oleic NPs (GON-DBCOs) via a bioorthogonal click reaction were prepared by the desolvation method for delivery of docetaxel (DTX) to lung and breast cancer models. The effect of shear stress (5 dyne/cm2) and human serum albumin (HSA) protein corona on the cellular behavior of NPs was explored under a dynamic microfluidic system in lung (A549) and breast (MCF-7) cancer cell lines. The developed drug-loaded NPs had a particle size of 300 nm, a narrow size distribution, positive zeta potential, high encapsulation efficacy (72.4%), and spherical morphology. The particle size of the protein corona-coated NPs increased to 341 nm with a negative zeta potential. The inhibitory dose (IC50) increased approximately 3- and 42-fold in A549 and MCF-7 cells, respectively, under dynamic microfluidic conditions compared to static conditions. Cellular uptake was significantly decreased in the presence of shear stress and a protein corona, compared with static conditions, in both lung (A549, **p < 0.01) and breast (MCF-7, *p < 0.05) cancer cell lines. Clathrin-and energy-dependent pathways were found to be involved in the cellular uptake of NPs. This study could serve as a vital tool for the evaluation of NPs under aggressive bio-mimicking conditions comprising shear stress and a protein corona to predict the in vivo performance of NPs and support the preclinical and clinical translation of NP drug delivery systems.
Assuntos
Docetaxel/química , Portadores de Fármacos/química , Gelatina/química , Nanopartículas/química , Coroa de Proteína/química , Materiais Biocompatíveis/química , Linhagem Celular Tumoral , Sobrevivência Celular/efeitos dos fármacos , Química Click , Docetaxel/metabolismo , Docetaxel/farmacologia , Liberação Controlada de Fármacos , Humanos , Microscopia Confocal , Tamanho da Partícula , Albumina Sérica Humana/química , Resistência ao CisalhamentoRESUMO
This study aimed to design the ideal nanonizing vehicle for poorly water-soluble model curcumin (CCM) using fattigation-platform nanotechnology, and to investigate the effects of fatty acid salts chain length on nanonizing CCM and its efficient delivery to different cancer cells. HSA-fatty acid conjugates were synthesized by EDC/NHS coupling. Fattigation-platform nanomicelles (NMs), prepared by film hydration, exhibited uniform and spherical morphology, although, each NM varied in particle size, zeta potential, and critical micelle concentration according to the types of fatty acid. Preliminary solubility studies of albumin conjugates with 5 types of fatty acid salts of different chain lengths revealed that C14 exhibited the highest solubilization of CCM. CCM-loaded HSA-C14 NMs demonstrated the highest drug content (5.35 ± 0.48%) and loading efficiency (95.93 ± 1.87%) compared to other NMs. It exhibited enhanced drug release rate and reduced micelle size in biorelevant dissolution medium. Interestingly, this solubilization approach was well applied in poorly water-soluble docetaxel trihydrate (DTX). Preliminary solubility results of DTX was also corresponded to the stable nanonization phenomenon in biorelevant dissolution medium. Compared to the CCM EtOH solution, HSA-C14 NMs showed higher internalization in cancer cell lines A549 and MCF-7, and consequently, exhibited significantly increased cytotoxicity against both cell lines. Therefore, this study provides a new solubilization approach for poorly water-soluble drugs using fatty acid salts of different chain lengths and their micellar formations via nanonization, which could be a promising tool for targeted cancer therapy using poorly water-soluble drugs.