The HMGBa-HSP70-ATF4-ß Axis Restricts White Spot Syndrome Virus Infection in Crayfish.

Envelope viruses are the most threatening pathogens to eukaryotes. The search for target genes against envelope viruses is particularly important. The activating transcription factors (ATFs) regulate cancer proliferation, maintain cellular redox homeostasis, extend biological longevity, and respond to viral stimuli. However, the mechanism of ATF antiviral immunity, especially envelope viruses, is rarely reported. Two ATF4 homologs (ATF4-α and ATF4-ß) with a difference of one ß sheet (7 amino acids) were identified in crayfish. Further studies showed that ATF4-ß was activated and significantly translocated into the nucleus after envelope virus white spot syndrome virus (WSSV) infection. During WSSV infection, the host may recognize WSSV in some way (such as HMGBa recognizing WSSV by interacting with WSSV/VP28) and transmits the signal to cell, and then HMGBa, HSP70, and ATF4-ß interact with each other in the cytoplasm and promote nuclear translocation of ATF4-ß. ATF4-ß entered the nucleus to initiate the transcription of ATF4 and ALFs. In addition, ALF1 could bind to VP28 to inhibit virus assembly in the nucleus and reinfection. This study elucidated a novel mechanism of ATF4-ß in antienvelope virus immune responses, and ATF4 may be a potential target for disease prevention and control.

Proteomic Analysis Revealed the Potential Role of MAGE-D2 in the Therapeutic Targeting of Triple-Negative Breast Cancer.

Among all the molecular subtypes of breast cancer, triple-negative breast cancer (TNBC) is the most aggressive one. Currently, the clinical prognosis of TNBC is poor because there is still no effective therapeutic target. Here, we carried out a combined proteomic analysis involving bioinformatic analysis of the proteome database, label-free quantitative proteomics, and immunoprecipitation (IP) coupled with mass spectrometry (MS) to explore potential therapeutic targets for TNBC. The results of bioinformatic analysis showed an overexpression of MAGE-D2 (melanoma antigen family D2) in TNBC. In vivo and in vitro experiments revealed that MAGE-D2 overexpression could promote cell proliferation and metastasis. Furthermore, label-free quantitative proteomics revealed that MAGE-D2 acted as a cancer-promoting factor by activating the PI3K-AKT pathway. Moreover, the outcomes of IP-MS and cross-linking IP-MS demonstrated that MAGE-D2 could interact with Hsp70 and prevent Hsp70 degradation, but evidence for their direct interaction is still lacking. Nevertheless, MAGE-D2 is a potential therapeutic target for TNBC, and blocking MAGE-D2 may have important therapeutic implications.

Self-assembled soft alloy with Frank-Kasper phases beyond metals.

Soft building blocks, such as micelles, cells or soap bubbles, tend to adopt near-spherical geometry when densely packed together. As a result, their packing structures do not extend beyond those discovered in metallic glasses, quasicrystals and crystals. Here we report the emergence of two Frank-Kasper phases from the self-assembly of five-fold symmetric molecular pentagons. The µ phase, an important intermediate in superalloys, is indexed in soft matter, whereas the ϕ phase exhibits a structure distinct from known Frank-Kasper phases in metallic systems. We find a broad size and shape distribution of self-assembled mesoatoms formed by molecular pentagons while approaching equilibrium that contribute to the unique packing structures. This work provides insight into the manipulation of soft building blocks that deviate from the typical spherical geometry and opens avenues for the fabrication of 'soft alloy' structures that were previously unattainable in metal alloys.

Molecular Face-Rotating Polyhedra: Chiral Cages Inspired by Mathematics.

ConspectusMolecular polyhedral cages, notable for their enclosed inner cavities, can possess varying degrees of symmetry, spanning from regular Platonic polyhedra to lower symmetry forms that may display chirality. Crafting chiral molecular cages typically involves using building blocks containing stereogenic elements or arranging achiral components in a manner that lacks mirror and inversion symmetries. Achieving precise control over their chirality poses both significance and challenges.In this Account, we present an overview of our research endeavors in the realm of chiral molecular polyhedral cages, drawing inspiration from Buckminster Fuller's "Face-Rotating Polyhedra (FRP)". Mathematically, FRP introduce a unique form of chirality distinguished by a rotating pattern around the center of each face, setting it apart from regular polyhedra.Molecular FRP can be constructed using two types of facial building blocks. The first includes rigid, planar molecules such as truxene and triazatruxene, which exhibit either clockwise or counterclockwise rotations in two dimensions. The second category involves propeller-like molecules, e.g., tetraphenylethylene, 1,2,3,4,5-penta(4-phenylaldehyde)pyrrole, and tridurylborane, displaying dynamic stereochemistry.The synthesis of FRP may potentially yield a diverse array of stereoisomers. Achieving high stereoselectivity becomes feasible through the selection of building blocks with specific substitution patterns and rigidity. Prominent noncovalent repulsive forces within the resulting cages often play a pivotal role in the dynamic covalent assembly process, ultimately leading to the formation of thermodynamically stable FRP products.The capacity to generate a multitude of stereoisomers, combined with the integration of chiral vertices, has facilitated investigations into phenomena such as chiral self-sorting and the "sergeant and soldiers" chiral amplification effect in FRP. Even the inclusion of one chiral vertex significantly impacts the stereochemical configuration of the entire cage. While many facial building blocks establish a stable rotational pattern in FRP, other units, such as tridurylborane, can dynamically transition between P and M configurations within the cage structures. The kinetic characteristics of such stereolabile FRP can be elucidated through physicochemical investigations.Our research extends beyond the FRP concept to encompass mathematical analysis of these structures. Graph theory, particularly the coloring problem, sheds light on the intricate facial patterns exhibited by various FRP stereoisomers and serves as an efficient tool to facilitate the discovery of novel FRP structures. This approach offers a fresh paradigm for designing and analyzing chiral molecular polyhedral cages, showcasing in our work the synergy between mathematics and molecular design.

Long-distance transport of sucrose in source leaves promotes sink root growth by the EIN3-SUC2 module.

In most plants, sucrose, a major storage sugar, is transported into sink organs to support their growth. This key physiological process is dependent on the function of sucrose transporters. Sucrose export from source tissues is predominantly controlled through the activity of SUCROSE TRANSPORTER 2 (SUC2), required for the loading of sucrose into the phloem of Arabidopsis plants. However, how SUC2 activity is controlled to support root growth remains unclear. Glucose is perceived via the function of HEXOKINASE 1 (HXK1), the only known nuclear glucose sensor. HXK1 negatively regulates the stability of ETHYLENE-INSENSITIVE3 (EIN3), a key ethylene/glucose interaction component. Here we show that HXK1 functions upstream of EIN3 in the regulation of root sink growth mediated by glucose signaling. Furthermore, the transcription factor EIN3 directly inhibits SUC2 activity by binding to the SUC2 promoter, regulating glucose signaling linked to root sink growth. We demonstrate that these molecular components form a HXK1-EIN3-SUC2 module integral to the control of root sink growth. Also, we demonstrate that with increasing age, the HXK1-EIN3-SUC2 module promotes sucrose phloem loading in source tissues thereby elevating sucrose levels in sink roots. As a result, glucose signaling mediated-sink root growth is facilitated. Our findings thus establish a direct molecular link between the HXK1-EIN3-SUC2 module, the source-to sink transport of sucrose and root growth.

What can molecular assembly learn from catalysed assembly in living organisms?

Molecular assembly is the process of organizing individual molecules into larger structures and complex systems. The self-assembly approach is predominantly utilized in creating artificial molecular assemblies, and was believed to be the primary mode of molecular assembly in living organisms as well. However, it has been shown that the assembly of many biological complexes is "catalysed" by other molecules, rather than relying solely on self-assembly. In this review, we summarize these catalysed-assembly (catassembly) phenomena in living organisms and systematically analyse their mechanisms. We then expand on these phenomena and discuss related concepts, including catalysed-disassembly and catalysed-reassembly. Catassembly proves to be an efficient and highly selective strategy for synergistically controlling and manipulating various noncovalent interactions, especially in hierarchical molecular assemblies. Overreliance on self-assembly may, to some extent, hinder the advancement of artificial molecular assembly with powerful features. Furthermore, inspired by the biological catassembly phenomena, we propose guidelines for designing artificial catassembly systems and developing characterization and theoretical methods, and review pioneering works along this new direction. Overall, this approach may broaden and deepen our understanding of molecular assembly, enabling the construction and control of intelligent assembly systems with advanced functionality.

Quantitative Pattern of hPTMs by Mass Spectrometry-Based Proteomics with Implications for Triple-Negative Breast Cancer.

Triple-negative breast cancer (TNBC) is known for its aggressive nature, and TNBC management is currently challenging due to the lack of effective targets. Despite the importance of histone post-translational modifications (hPTMs) in breast cancer, their associations with molecular subtypes of breast cancer, especially TNBC, are poorly understood. In this study, a combination of untargeted and targeted proteomics approaches, supplemented by a derivatization method, was applied to breast cancer cells and tissue samples. Untargeted proteomics of eight breast cancer cell lines belonging to different molecular subtypes revealed 36 modified peptides with 12 lysine modification sites in histone H3, and the most frequently reported top 5 histone H3 methylation and acetylation sites were covered. Then, targeted proteomics was carried out to quantify the total 20 target hPTMs at the covered modification sites (i.e., mono-, di-, trimethylation, and acetylation for each site), indicating the difficulty in distinguishing TNBC cells from normal cells. Subsequently, the analysis in TNBC patients revealed significant expression differences in 4 specific hPTMs (H3K14ac, H3K27me1, H3K36me2, and H3K36me3) between TNBC and adjacent normal tissue samples. These unique hPTM patterns allowed for the differentiation of TNBC from normal cases. This finding provides promising implications for advancing targeted treatment strategies for TNBC in the future.

Isoreticular Covalent Organic Pillars: Engineered Nanotubular Hosts for Tailored Molecular Recognition.

In the realm of nanoscale materials design, achieving precise control over the dimensions of nanotubular architectures poses a substantial challenge. In our ongoing pursuit, we have successfully engineered a novel class of single-molecule nanotubes─isoreticular covalent organic pillars (iCOPs)─by stacking formylated macrocycles through multiple dynamic covalent imine bonds, guided by principles of reticular chemistry. Our strategic selection of rigid diamine linkers has facilitated the synthesis of a diverse array of iCOPs, each retaining a homologous structure yet offering distinct cavity shapes influenced by the linker choice. Notably, three of these iCOP variants feature continuous one-dimensional channels, exhibiting length-dependent host-guest interactions with α,ω-dibromoalkanes, and each presenting a distinct critical guest alkyl chain length threshold for efficient guest encapsulation. This newfound capability not only provides a platform for tailoring nanotubular structures with precision, but also opens new avenues for innovative applications in molecular recognition and the purification of complex mixtures.

Hydrogen-Bonded Mesoporous Frameworks with Tunable Pore Sizes and Architectures from Nanocluster Assembly Units.

Construction of mesoporous frameworks by noncovalent bonding still remains a great challenge. Here, we report a micelle-directed nanocluster modular self-assembly approach to synthesize a novel type of two-dimensional (2-D) hydrogen-bonded mesoporous frameworks (HMFs) for the first time based on nanoscale cluster units (1.0-3.0 nm in size). In this 2-D structure, a mesoporous cluster plate with ∼100 nm in thickness and several micrometers in size can be stably formed into uniform hexagonal arrays. Meanwhile, such a porous plate consists of several (3-4) dozens of layers of ultrathin mesoporous cluster nanosheets. The size of the mesopores can be precisely controlled from 11.6 to 18.5 nm by utilizing the amphiphilic diblock copolymer micelles with tunable block lengths. Additionally, the pore configuration of the HMFs can be changed from spherical to cylindrical by manipulating the concentration of the micelles. As a general approach, various new HMFs have been achieved successfully via a modular self-assembly of nanoclusters with switchable configurations (nanoring, Keggin-type, and cubane-like) and components (titanium-oxo, polyoxometalate, and organometallic clusters). As a demonstration, the titanium-oxo cluster-based HMFs show efficient photocatalytic activity for hydrogen evolution (3.6 mmol g-1h-1), with a conversion rate about 2 times higher than that of the unassembled titanium-oxo clusters (1.5 mmol g-1h-1). This demonstrates that HMFs exhibited enhanced photocatalytic activity compared with unassembled titanium-oxo clusters units.

Cinquefoil Knot Possessing Dynamic and Tunable Metal Coordination.

While the majority of knots are made from the metal-template approach, the use of entangled, constrained knotted loops to modulate the coordination of the metal ions remains inadequately elucidated. Here, we report on the coordination chemistry of a 140-atom-long cinquefoil knotted strand comprising five tridentate and five bidentate chelating vacancies. The knotted loop is prepared through the self-assembly of asymmetric "3 + 2" dentate ligands with copper(II) ions that favor five-coordination geometry. The formation of the copper(II) pentameric helicate is confirmed by X-ray crystallography, while the corresponding copper(II) knot is characterized by XPS and LR-/HR ESI-MS. Upon removal of the original template, the knotted ligand facilitates zinc(II) ions, which typically form four- or six-coordination geometries, resulting in the formation of an otherwise inaccessible zinc(II) metallic knot with coordinatively unsaturated metal centers. The coordination numbers and geometries of the zinc(II) cations are undoubtedly determined by X-ray crystallography. Despite the kinetically labile nature and high reversibility of the zinc(II) complex preventing the detection of 5-to-6 coordination equilibrium in solution, the effects on metal-ion coordination induced by knotting hold promise for fine-tuning the coordination of metal complexes.

A Bifunctional Wearable Sensor Based on a Nanoporous Membrane for Simultaneous Detection of Sweat Lactate and Temperature.

Wearable sensors for non-invasive, real-time detection of sweat lactate have far-reaching implications in the fields of health care and exercise physiological responses. Here, we propose a wearable electrochemical sensor with gold nanoelectrode arrays fabricated on the nanoporous polycarbonate (PC) membrane by encapsulating lactate oxidase (LOx) in chitosan (CS) hydrogel for detecting body temperature and sweat lactate concurrently. Flexible gold nanoporous electrodes not only enhance electrode area but also offer a nanoconfined space to accelerate the catalytic reaction of LOx and control substrate concentration on the surface of LOx to decrease substrate inhibition. The proposed sensor has a long durability of 13 days and better selectivity for the detection of sweat lactate over a wide linear range (0.01-35 mM) with a low detection limit (0.144 µM). Furthermore, temperature-dependent transmembrane currents passing through the sensor are used to estimate body temperature. We then use multiple linear regression to adjust the effect of temperature on lactate detection and succeed in monitoring lactate molecules in sweat and body temperature during exercise.

Mobile genetic elements contributing to horizontal gene transfer of blaNDM among Escherichia coli in the community setting.

OBJECTIVE: To investigate the distribution of carbapenem-resistant Enterobacterales (CRE) in the community and to describe the genomic characteristics. METHODS: CRE screened from fecal samples in healthy people at the health examination center of a tertiary hospital in China underwent Whole genome sequencing (WGS) to analyze genotypic characteristics of CRE. The flanking DNA sequence of blaNDM-5 and mcr1.1 genes were analyzed by Gcluster software. RESULTS: A total of 7187 fecal samples were screened, and CRE carriage was detected in 0.4 % of the sampled population. In total, 30 Escherichia coli, one Citrobacter freundii and one Klebsiella aerogene were screened. The 30 carbapenem-resistant Escherichia coli (CREC) isolates displayed slight resistance to amikacin (13.3 %) and aztreonam (20.0 %). All the CRE isolates contained blaNDM, and blaNDM-5 (84.4 %) was the most common one. B1 (n = 11) and A (n = 7) were predominant phylogroups. Furthermore, 34 distinct plasmid replicons, 67 different VFs, 22 distinct STs, 17 different FimH types, 26 O:H serotypes as well as 74 MGEs including 61 insertion sequences and 13 transposons were identified. The flanking DNA sequence analysis of blaNDM-5 and mcr1.1 genes indicates the key role of horizontal transfer of blaNDM-5 in the CRE development evidenced by diverse STs and phylogenetic tree. CONCLUSION: E. coli was the most predominant CRE isolates in community setting, and blaNDM (blaNDM-5) was the main CHßL encoding genes. The high prevalence of ARGs was associated with high resistance to commonly used antimicrobials. Besides, the genetic diversity of these isolates suggested the key role of blaNDM horizontal transfer in the CRE development. Thus, active screening of blaNDM in communities is particularly important for the prevention and control of CRE.

Single femtosecond pulse writing of a bifocal lens.

In this Letter, a method for the fabrication of bifocal lenses is presented by combining surface ablation and bulk modification in a single laser exposure followed by the wet etching processing step. The intensity of a single femtosecond laser pulse was modulated axially into two foci with a designed computer-generated hologram (CGH). Such pulse simultaneously induced an ablation region on the surface and a modified volume inside the fused silica. After etching in hydrofluoric acid (HF), the two exposed regions evolved into a bifocal lens. The area ratio (diameter) of the two lenses can be flexibly adjusted via control of the pulse energy distribution through the CGH. Besides, bifocal lenses with a center offset as well as convex lenses were obtained by a replication technique. This method simplifies the fabrication of micro-optical elements and opens a highly efficient and simple pathway for complex optical surfaces and integrated imaging systems.

Charge-Assisted Ionic Hydrogen-Bonded Organic Frameworks: Designable and Stabilized Multifunctional Materials.

Hydrogen-bonded organic frameworks (HOFs) are a class of crystalline framework materials assembled by hydrogen bonds. HOFs have the advantages of high crystallinity, mild reaction conditions, good solution processability, and reproducibility. Coupled with the reversibility and flexibility of hydrogen bonds, HOFs can be assembled into a wide diversity of crystalline structures. Since the bonding energy of hydrogen bonds is lower than that of ligand and covalent bonds, the framework of HOFs is prone to collapse after desolventisation and the stability is not high, which limits the development and application of HOFs. In recent years, numerous stable and functional HOFs have been developed by π-π stacking, highly interpenetrated networks, charge-assisted, ligand-bond-assisted, molecular weaving, and covalent cross-linking. Charge-assisted ionic HOFs introduce electrostatic attraction into HOFs to improve stability while enriching structural diversity and functionality. In this paper, we review the development, the principles of rational design and assembly of charge-assisted ionic HOFs, and introduces the different building block construction modes of charge-assisted ionic HOFs. Highlight the applications of charge-assisted ionic HOFs in gas adsorption and separation, proton conduction, biological applications, etc., and prospects for the diverse design of charge-assisted ionic HOFs structures and multifunctional applications.

A Molecular Cage Accessed by Threefold Click Reaction of a C3v-Symmetric Triazido-Functionalized Tribenzotriquinacene.

The hitherto unknown hexakis(halomethyl)-functionalized tribenzotriquinacenes (TBTQs) 9 and 10 were synthesized from the key 4b,8b,12b-tribromo-TBTQ derivative 6 by an improved route in 67% overall yield. Extension of the bowl-shaped framework of 9 or 10 by threefold condensation with propargylamine or 2-azidoethylamine afforded the corresponding TBTQ-trialkyne 11 and TBTQ-triazide 12, respectively. While attempts to construct bis-TBTQ cages, including homodimerization of 11 and heterocoupling of 11 with 12, were unsuccessful, triazide 12 was found to undergo threefold [3 + 2]-cycloaddition with 3-ethynylaniline and phloroglucinol tripropargyl ether under click chemistry conditions. The latter reaction enabled facile capping of the TBTQ bowl to give the novel cage compound 5 in 22% yield.

PHB2 inhibits WSSV replication by promoting the nuclear translocation of STAT.

Prohibitins (PHBs) are ubiquitously expressed conserved proteins in eukaryotes that are associated with apoptosis, cancer formation, aging, stress responses and cell proliferation. However, the function of the PHBs in immune regulation has largely not been determined. In the present study, we identified PHB2 in the red swamp crayfish Procambarus clarkii. PHB2 was found to be widely distributed in several tissues, and its expression was significantly upregulated by white spot syndrome virus (WSSV) challenge. PHB2 significantly reduced the amount of WSSV in crayfish and the mortality of WSSV-infected crayfish. Here, we observed that PHB2 promotes the nuclear translocation of STAT by binding to STAT. After blocking PHB2 or STAT with antibodies or interfering with PHB2 or STAT, the expression levels of the antiviral genes ß-thymosin (PcThy-4) and crustin2 (Cru2) decreased. The gene sequence of PHB2 was analyzed and found to contain a nuclear introgression sequence (NIS). After in vivo injection of PHB2 with deletion of NIS (rΔNIS-PHB2), the nuclear translocation of STAT did not change significantly compared to that in the control group. These results suggest that PHB2 promoted the nuclear translocation of STAT through NIS and mediated the expression of antiviral proteins to inhibit WSSV infection.

High -Sensitive Detection of Malachite Green Based on Surface-Enhanced Electrochemiluminescence.

This article introduces a novel unlabeled surface-enhanced electrochemiluminescence (SEECL) sensor for malachite green (MG) detection. The SEECL sensor was prepared by modifying the Ru(bpy)32+ doped gold-SiO2 core-shell nanocomposites (Au@SiO2-Ru(bpy)32+) on the gold electrode. Ru(bpy)32+ of nanocomposites can not only emit electrochemiluminescence (ECL) with electrochemical reaction, but also induce the local surface plasmon resonance (LSPR) of gold core. That is beneficial to enhance the ECL signa of sensor. However, in the existence of MG, the luminescence of sensor would be quenched by the fluorescence resonance energy transfer (FRET) between MG and Ru(bpy)32+. In this paper, both fluorescence and ECL of the Au@SiO2-Ru(bpy)32+ were investigated for MG detection. And the results show that the SEECL sensor has high sensitive to MG. Under the optimal experimental conditions, the minimum detection concentration could be achieved about 1.0 nM of MG, which fully meets the China national standard detection requirements of veterinary drug residue in seafood.

Carbazole-based mitochondria-targeted fluorescent probes for in vivo viscosity and cyanide detection in cells and zebrafish.

Cells of most eukaryotic species contain mitochondria, which play a role in physiological processes such as cellular senescence, metabolism, and autophagy. Viscosity is considered a key marker for many illnesses and is involved in several crucial physiological processes. Cyanide (CN-) can target cytochrome-c oxidase, disrupting the mitochondrial electron transport chain and causing cell death through asphyxiation. In this study, a fluorescent probe named HL-1, which targets mitochondria and measures viscosity and CN- levels, was designed and synthesized. HL-1 is viscosity-sensitive, with a linear correlation coefficient of up to 0.992. In addition, HL-1 was found to change color substantially during a nucleophilic addition reaction with CN-, which has a low detection limit of 47 nM. HL-1 not only detects viscosity and exogenous CN- in SKOV-3 cells and zebrafish but also monitors viscosity changes during mitochondrial autophagy in real time. Furthermore, HL-1 has been used successfully to monitor changes in mitochondrial membrane potential during apoptosis. Endogenous CN- in plant samples was quantified. HL-1 provides new ideas for studying viscosity and CN-.

Detailed analysis of learning phases and outcomes in robotic and endoscopic thyroidectomy.

BACKGROUND: Thyroid surgery has undergone significant transformation with the introduction of minimally invasive techniques, particularly robotic and endoscopic thyroidectomy. These advancements offer improved precision and faster recovery but also present unique challenges. This study aims to compare the learning curves, operational efficiencies, and patient outcomes of robotic versus endoscopic thyroidectomy. METHODS: A retrospective cohort study was conducted, analyzing 258 robotic (da Vinci) and 214 endoscopic thyroidectomy cases. Key metrics such as operation duration, drainage volume, lymph node dissection outcomes, and hypoparathyroidism incidence were assessed to understand surgical learning curves and efficiency. RESULTS: Robotic thyroidectomy showed a longer learning curve with initially longer operation times and higher drainage volumes but superior lymph node dissection outcomes. Both techniques were safe, with no permanent hypoparathyroidism or recurrent laryngeal nerve damage reported. The study delineated four distinct stages in the robotic and endoscopic surgery learning curve, each marked by specific improvements in proficiency. Endoscopic thyroidectomy displayed a shorter learning curve, leading to quicker operational efficiency gains. CONCLUSION: Robotic and endoscopic thyroidectomies are viable minimally invasive approaches, each with its learning curves and efficiency metrics. Despite initial challenges and a longer learning period for robotic surgery, its benefits in complex dissections may justify specialized training. Structured training programs tailored to each technique are crucial for improving outcomes and efficiency. Future research should focus on optimizing training protocols and increasing accessibility to these technologies, enhancing patient care in thyroid surgery.

Use of the Omaha System nursing model on nutritional status outcomes in peritoneal dialysis patients.

OBJECTIVE: To construct and apply a risk screening and intervention system for malnutrition in peritoneal dialysis patients based on the Omaha System. MATERIALS AND METHODS: A total of 75 peritoneal dialysis patients were randomly divided into control (38 cases) and intervention group (37 cases). The control group received routine operation training and health education, and the intervention group implemented a nutritional management plan based on the Omaha System. The modified quantitative subjective comprehensive nutritional scale (MQSGA) score, kidney disease dietary compliance attitude (RAAQ) and behavior (RABQ) score, body mass index (BMI), serum albumin (ALB), prealbumin (PA), and hemoglobin (Hb) were observed. RESULTS: Before intervention, there was no significant difference in these indicators between the two groups (p > 0.05). After 6 months, the MQSGA score in the intervention group was significantly lower than that in the control group (p < 0.05). RAAQ score and RABQ score in the intervention group were higher than those in the control group and (p < 0.05), and the nutritional indicators in the intervention group, such as BMI, ALB, PA, and Hb, were higher than those in the control group (p < 0.05). CONCLUSION: A nutritional management plan based on the Omaha System can help improve the nutrition condition of peritoneal dialysis patients, and improve the dietary compliance of chronic kidney disease patients.