Synthesis and Investigation of Electro-Optical Properties of H-Shape Dibenzofulvene Derivatives.

We have synthetized two classes of dibenzofulvene-arylamino derivatives with an H-shape design, for a total of six different molecules. The molecular structures consist of two D-A-D units connected by a thiophene or bitiophene bridge, using diarylamino substituents as donor groups anchored to the 2,7- (Group A) and 3,6- (Group B) positions of the dibenzofulvene backbone. The donor units and the thiophene or bithiophene bridges were used as chemico-structural tools to modulate electro-optical and morphological-electrical properties. A combination of experiments, such as absorption measurements (UV-Vis spectroscopy), cyclic voltammetry, ellipsometry, Raman, atomic force microscopy, TD-DFT calculation and hole-mobility measurements, were carried out on the synthesized small organic molecules to investigate the differences between the two classes and therefore understand the relevance of the molecular design of the various properties. We found that the anchoring position on dibenzofulvene plays a crucial key for fine-tuning the optical, structural, and morphological properties of molecules. In particular, molecules with substituents in 2,7 positions (Group A) showed a lower structural disorder, a larger molecular planarity, and a lower roughness.

Colloidal Bismuth Chalcohalide Nanocrystals.

Here we present a colloidal approach to synthesize bismuth chalcohalide nanocrystals (BiEX NCs, in which E=S, Se and X=Cl, Br, I). Our method yields orthorhombic elongated BiEX NCs, with BiSCl crystallizing in a previously unknown polymorph. The BiEX NCs display a composition-dependent band gap spanning the visible spectral range and absorption coefficients exceeding 105  cm-1 . The BiEX NCs show chemical stability at standard laboratory conditions and form colloidal inks in different solvents. These features enable the solution processing of the NCs into robust solid films yielding stable photoelectrochemical current densities under solar-simulated irradiation. Overall, our versatile synthetic protocol may prove valuable in accessing colloidal metal chalcohalide nanomaterials at large and contributes to establish metal chalcohalides as a promising complement to metal chalcogenides and halides for applied nanotechnology.

Thiophene-based fluorescent probes with low cytotoxicity and high photostability for lysosomes in living cells.

BACKGROUND: Selective imaging of lysosomes by fluorescence microscopy using specific fluorescent probes allows the study of biological processes and it is potentially useful also for diagnosis. Lysosomes are involved in numerous physiological processes, such as bone and tissue remodeling, plasma membrane repair, and cholesterol homeostasis, along with cell death and cell signaling. Despite the great number of dyes available today on the market, the search for new fluorescent dyes easily up-taken by cells, biocompatible and bearing bright and long-lasting fluorescence is still a priority. METHODS: Two thiophene-based fluorescent dyes, TC1 and TC2, were synthetized as lysosome-specific probes. RESULTS: The new dyes showed high selectivity for fluorescent staining and imaging of lysosomes and disclosed high photostability, low toxicity and pH insensitivity in the range 2-10. CONCLUSIONS: The TC dyes exhibited high co-localization coefficients (>95%) and moderate quantum yields. They showed high biocompatibility and long-term retention, important features for biological applications. GENERAL SIGNIFICANCE: The results of the present work disclose a new class of organic dyes with potential wide applications as specific and efficient lysosome probes in the study of various biological processes.

Modelling methacrylated chitosan hydrogel properties through an experimental design approach: from composition to material properties.

Hydrogels of biopolymers are gradually substituting synthetic hydrogels in tissue engineering applications due to their properties. However, biopolymeric hydrogels are difficult to standardize because of the intrinsic variability of the material and the reversibility of physical crosslinking processes. In this work, we synthesized a photocrosslinkable derivative of chitosan (Cs), namely methacrylated chitosan (CsMA), in which the added methacrylic groups allow the formation of hydrogels through radical polymerization triggered by UV exposure. We then performed a systematic study to link the physical properties of the materials to its preparation parameters to standardize its preparation according to specific applications. We studied the properties of CsMA solutions and the derived hydrogels using a statistical method, namely, response surface method, which allowed us to build empirical models describing material properties in terms of several selected processing factors. In particular, we studied the viscosity of CsMA solutions as a function of CsMA concentration, temperature, and shear rate, while hydrogel compression modulus, morphology, degradation and solubilization were investigated as a function of CsMA concentration, photoinitiator concentration and UV exposure. CsMA solutions resulted in shear thinning and were thus suitable for extrusion-based 3D printing. The CsMA hydrogel was found to be highly tunable, with a stiffness in the 12-64 kPa range, and was stable over a long timeframe (up to 60 days). Finally, the possibility to engineer hydrogel stiffness through an empirical model allowed us to hypothesize a number of possible applications based on the mechanical properties of several biological tissues reported in the literature.

Modulation of Methacrylated Hyaluronic Acid Hydrogels Enables Their Use as 3D Cultured Model.

Bioengineered hydrogels represent physiologically relevant platforms for cell behaviour studies in the tissue engineering and regenerative medicine fields, as well as in in vitro disease models. Hyaluronic acid (HA) is an ideal platform since it is a natural biocompatible polymer that is widely used to study cellular crosstalk, cell adhesion and cell proliferation, and is one of the major components of the extracellular matrix (ECM). We synthesised chemically modified HA with photo-crosslinkable methacrylated groups (HA-MA) in aqueous solutions and in strictly monitored pH and temperature conditions to obtain hydrogels with controlled bulk properties. The physical and chemical properties of the different HA-MA hydrogels were investigated via rheological studies, mechanical testing and scanning electron microscopy (SEM) imaging, which allowed us to determine the optimal biomechanical properties and develop a biocompatible scaffold. The morphological evolution processes and proliferation rates of glioblastoma cells (U251-MG) cultured on HA-MA surfaces were evaluated by comparing 2D structures with 3D structures, showing that the change in dimensionality impacted cell functions and interactions. The cell viability assays and evaluation of mitochondrial metabolism showed that the hydrogels did not interfere with cell survival. In addition, morphological studies provided evidence of cell-matrix interactions that promoted cell budding from the spheroids and the invasiveness in the surrounding environment.

Functional Organic Materials for Photovoltaics: The Synthesis as a Tool for Managing Properties for Solid State Applications.

The continuous increase in the global energy demand deeply impacts the environment. Consequently, the research is moving towards more sustainable forms of energy production, storage and saving. Suitable technologies and materials are fundamental to win the challenge towards a greener and more eco-friendly society. Organic π-conjugated materials, including small molecules, oligomers and polymers are a wide and versatile class of functional materials with great potentiality, as they can be used as active matrixes in the fabrication of lightweight, flexible, cheap and large area devices. Their chemical and physical properties, both at a molecular level and mainly in the solid state, are a result of many factors, strictly related to the conjugated structure and functional groups on the backbone, which control the intermolecular forces driving solid state aggregations. The synthesis, through the molecular design, the choice of conjugated backbone and functionalization, represents the first and most powerful tool for finely tuning the chemico-physical properties of organic materials tailored for specific applications. In the present review, we report an overview of our works focused on synthetic methodologies, characterization, structure-properties correlation studies and applications of organic materials designed for energy-involving solid-state applications, organic photovoltaics in particular. The impact of functionalization on electro-optical properties and performance in device are discussed, also in relation to the specific applications.

Stable Ligand Coordination at the Surface of Colloidal CsPbBr3 Nanocrystals.

Ruling over the surface chemistry of metal halide perovskite nanocrystals (NCs) is crucial to access reliable luminophores. Here, we provide an atomic-level description of the surface of colloidal CsPbBr3 NCs, achieving an effective passivation strategy that leads to near-unity photoluminescence quantum yield. To this end, we used two different types of CsPbBr3 NCs, which had been synthesized with an outer shell of either oleylammonium bromide ion pairs or Cs-oleate complexes. We perturbed the dynamic equilibria at the NCs' surface with ligands from a comprehensive library, including amines (and their conjugated acids) with different basicities, chain lengths, and steric encumbrances. We demonstrate that control of both ligand binding affinity and ligand-to-NC molar ratio is essential to attain thermodynamically stable coordination of the NC surface. We thus present a reliable protocol for managing the surface chemistry of colloidal CsPbBr3 NCs and for selectively addressing their ligand-induced morphological (and structural) transformations.