Dentistry and Covid-19 pandemic: operative indications post-lockdown.

A new Coronavirus, the seventh member of the Coronaviridae family, identified as SARS-CoV-2, spread in late December 2019 in the territory of Wuhan in China. CoV-2019 can be transmitted directly from person to person by respiratory drops, direct contact and contaminated material. Furthermore, 2019-nCov penetrates cells similarly to the SARS coronavirus, i.e., through the ACE2 receptor. This may promote human-to-human transmission. Patients and dental professionals are exposed daily to pathogenic microorganisms, including viruses and bacteria, which infect the oral cavity and respiratory tract. Dental procedures carry the risk of 2019-nCoV infection due to their specificity. Direct transmission regards the distance between operator and patient, exposure to saliva, blood and other body fluids, the use of sharp instruments and "droplet-generating" rotating instruments, contact with the conjunctival mucosa, and finally the contact with droplets produced by coughing and nasal secretion of an infected individual without mask at short distance, increasing the biological risk for the operator. In light of the pandemic linked to COVID-19, although there is no clear scientific evidence in the literature, it is necessary to identify protections with regard to clothing, operating protocols, disinfection of environments and management of waiting rooms and front offices. This paper is a basis for operative indications for dentists and other health care professionals in phase 2 post lockdown for both private and public structures.

Dental deaths in Italy as reported by online press articles.

OBJECTIVES: Mortality on the dental chair is a rare and underreported event. This study aimed to identify all deaths that occurred during dental procedures in Italy. METHODS: We searched PubMed/Medline, Scopus, and Internet archives looking for patients who died before, during, or after a dental procedure in Italy from 1990 to 2019. RESULTS: All the 36 identified fatal events were reported by national or regional newspapers, and none was reported by scientific databases. Interestingly, no cases regarding patients ≤16 years old were found and there was no variation in the number of reported deaths over the years. Most of the cases (n = 29) occurred in out-of-hospital private dental offices. Tooth extraction represented the most frequent culprit operation (39%), while myocardial infarction (28%) was the leading cause of death, followed by cardiac arrest (25%), allergies (11%), and infections (8%). In four cases, death was preprocedural, in 10 intraprocedural and in 21 postprocedural. In 17 cases, a temporal association between injection of anesthesia/sedation and death was observed. CONCLUSION: This is the first report on Italian dental procedure-related deaths. Most of these deaths were only temporally associated with a dental procedure and could not to be attributed to malpractice.

Point-of-care testing for hepatitis C virus infection at an Italian dental clinic: portrait of the pilot study population.

The dental clinic is an appropriate place to promote the prevention of hepatitis C virus (HCV) infection and fast access for care of HCV-positive subjects with new-generation anti-HCV drugs. This study aimed to determine the socio-demographic profile of subjects screened for HCV virus in a dental clinic to acquire useful information for future campaigns of prevention. An easy, free-of-charge, screen salivary test was offered to patients referred to the dental clinic of San Raffaele Scientific Research Hospital in Milan, Italy for dental procedures. These patients were also asked to complete an anonymous questionnaire on demographics and risk behaviours. A total of 1388 of 2097 (66.19%) questionnaires were evaluable. The demographics of the population responding to this initiative was primarily Italians citizen (96.47%), homogeneous gender distribution (55.55%), age over 50 (609 subjects; 43.88%), with high-level education and stable professional positions. 905 subjects (65.20%) were never tested for HCV before. The test showed positive reactivity in 22 cases (1.05%); of these, 21 subjects were known to be HCV-positive, and the test confirmed their status. One subject was newly diagnosed as HCV-positive. The percentage of subjects who were never tested for HCV infection appears too high (905 subjects, i.e., 65.20%), especially among subjects with high level of education and professions, and among adults over 40 or young people (18-25). The easy screening test in dental clinic can help raise awareness, promote early diagnosis and prevention, and provide a fast link to care for HCV infection.

Milled versus moulded mock-ups based on the superimposition of 3D meshes from digital oral impressions: a comparative in vitro study in the aesthetic area.

BACKGROUND: Aesthetic porcelain veneers proved to be a long-term reliable prosthetic solution, ensuring minimal invasiveness. The use of veneers requires an adhesive cementation technique, so maintaining as much enamel as possible is to ensure lasting success. A diagnostic mock-up is a key tool that allows a preview of the outcome of the aesthetic restoration: it is obtainable both in an analog and digital way. With the recent developments in impression technology and the ever so fast growing use of CAD-CAM technologies it is useful to understand the pros and cons of either one of these techniques (analog and digital) in order to identify the easier and more convenient workflow in aesthetic dentistry. METHODS: After taking pictures and impressions of the dental arcs of a patient in need of aesthetic rehabilitation, 52 resin models were produced and a digital drawing of the smile was outlined. Both an analog and a digital wax-up were obtained from two of the 52 models: the latter was obtained using digital impressions and a dedicated software. The analog wax-up was then used to produce 25 matrices that have later been used to mould 25 resin mock-ups using a traditional moulding protocol (Control Group - CG). The digital wax-up was used to mill 25 PMMA mock-ups. Each mock-up, both milled and moulded (total 50), was then laid on the other 50 resin models as a digital impression of it was taken. The STL. files of the milled mock-ups were compared with the 3D CAD wax-up made using a specific software. The STL. files of the analog printed mock-ups were compared with the traditional wax-up design. A statistical analysis was carried out to evaluate the difference between the groups. RESULTS: The statistical analysis showed a significant difference (P > 0.01) between the mean value of the distance between the points of the overlapping STL. meshes in GC (0.0468 mm) and in TG (Test Group - TG) (0,0109 mm). CONCLUSIONS: The study showed a difference in accuracy between traditional moulded and milled mock-ups compared to their original wax-up. The data analysis reports that the digital method allows for greater accuracy. Within the limitations of this study, a fully digital workflow is to considered more reliable when it come to creating an esthetic mockup: the digital procedure has been shown to be more accurate than the one made manually which is much more operator dependent and it brings an increase to the chance of error, and that could ultimately affect the final result.

Point-of-care testing for hepatitis C virus infection at alternative and high-risk sites: an Italian pilot study in a dental clinic.

The Infectious Diseases Department and the Department of Dentistry of San Raffaele Scientific Institute in Milan conducted a screening and prevention program, the "EASY HCV-test Program," at a dental clinic to increase the identification of unrecognized infections. Using a cross-sectional community-based study design, hygienists in the dental clinic offered patients a hepatitis C virus (HCV) rapid salivary test (OraQuick ADVANCE® Rapid HCV Antibody Test) with pre- and post-test counseling prior to initiation of their oral hygiene routine. From April 2015 to November 2015, the EASY HCV test was offered to 2650 patients visiting the Center of Oral Health and Prevention at the Department of Dentistry at San Raffaele Hospital in Milan. Among them, 2077 eligible volunteers were tested. The test showed positive reactivity in 22 cases; of these, 21 subjects were known to suffer from HCV, and the test confirmed their status. One subject was newly diagnosed with HCV infection. The results of this study suggest EASY HCV test screening conducted in dental clinics may constitute an effective strategy for increasing HCV testing among people at risk for infection.

Dimensional Changes of Fresh Sockets With Reactive Soft Tissue Preservation: A Cone Beam CT Study.

PURPOSE: The aim of this study was to assess dimensional changes of the fresh sockets grafted with collagen sheets and maintenance of reactive soft tissue, using cone beam computed tomography (CBCT). MATERIALS AND METHODS: Tooth extractions were performed with maximum preservation of the alveolar housing, reactive soft tissue was left into the sockets and collagen sheets filled bone defects. Cone beam computed tomography were performed before and 3 months after extractions. RESULTS: One hundred forty-five teeth, 60 monoradiculars and 85 molars, were extracted. In total, 269 alveoli were evaluated. In Group A, not statistically significant differences were found between monoradiculars, whereas statistically significant differences (P < 0.05) were found between molars, both for mesial and distal alveoli. In Group B, not statistically significant differences were found between maxillary and mandibular bone changes values (P > 0.05) for all types of teeth. CONCLUSIONS: This study reported an atraumatic tooth extraction, reactive soft tissue left in situ, and grafted collagen sponge may be helpful to reduce fresh socket collapse after extraction procedures.

Evaluation of resistance against bacterial microleakage of a new conical implant-abutment connection versus conventional connections: an in vitro study.

The aim of the present in vitro study was to evaluate bacterial microleakage from inside to outside the implant-abutment assembly in a new design of internal conical connection compared to eight different internal connections. The design of this connection should prevent or limit microbiologic leakage into the surrounding implant tissue, that could contribute to infections without bone loss (mucositis) or with bone loss (peri-implantits). In order to investigate bacterial microleakage, the inner part of each system was inoculated with an Escherichia coli suspension. Eight different groups were considered; each group was composed of 10 dental implants, for a total of 80 implants. Groups 1-7 were considered controls, while group 8 was the test connection (an internal connection characterized by a double taper principle). Results showed that in control implants (Group 1 to 7), little microleakage was observed after the first 6 hours (500 CFU/ µl) and, after 24 hours of incubation, they showed a significant bacterial contamination in all samples (>100.000 CFU/ µl). In group 8 (test connection) no contamination was found in the first 6 hours, with 7 out of 10 implants showing no contamination even after 96 hours. Statistically significant differences were found between Group 8 and the other groups (p<0.05), whereas no significant differences were found among implants of the control groups (from group 1 to 7). Within the limits of the present study, the new connection studied presented significantly less microleakage at 96 h in comparison with the other control internal connections.

Digital impressions for fabrication of definitive "all-on-four" restorations.

PURPOSE: The aim of this study was to assess the accuracy of digital impressions for "all-on-four" implant rehabilitation. MATERIALS AND METHODS: Patients edentulous in one or both jaws were randomly selected for this study. Complete arch immediately loaded prostheses supported by 4 implants (2 axial and 2 tilted) were placed. Five hours after implant placement, screw-retained full-arch temporary prostheses were positioned. After 4 months, a digital scan body was used to finalize definitive prosthesis. Radiographic assessments were obtained immediately after surgery and at each follow-up visit. Bone level measurements were reported at 6 and 12 months, and bone loss between upright and tilted implants was compared. RESULTS: Fourteen definitive cast metal frameworks prosthesis were delivered to the patients. No implant dropout occurred. All prosthesis were screwed onto the dental implants, and x-ray examinations revealed a bar-implant connection accuracy. The implant survival rate was 100% for all positioned implants. No statistically significant differences (P > 0.05) in crestal bone loss between tilted and upright implants were detected. CONCLUSIONS: Digital impression creates an accurate physical model significantly improving efficiencies for the dental team and streamlining the workflow.

The utility of the electric mallet.

The aim of this study was to evaluate the efficiency of electrical mallet for tooth extraction evaluating the integrity of fresh sockets walls. From July 2009 to February 2012, 427 hopeless teeth were extracted in 156 patients: 96 males and 60 females, with a mean age of 53.2 ± 26.4 years. Two hundred fifty teeth were extracted from the maxilla and 177 from the mandible. Extractions were performed using an electrical mallet. It pushed blade in a longitudinal movement along central axis, moving up and down toward the periodontal ligament space in a repetitive manner, providing a driving mechanism of longitudinal movements. Intraoral digital radiographic examinations were performed before and immediately after dental extractions to evaluate the lamina dura setting. No fracture or loss of cortical bone plate was observed in fresh sockets of teeth extracted by electrical mallet. All the alveoli revealed full soft tissue secondary healing 2 weeks after complete root extraction. During the healing period, there were no signs of inflamed tissue or exposed bone in any of the cases. As reported in this clinical study, maximum preservation of the alveolar housing and related gingival structures may be achieved following assisted atraumatic tooth extraction by electrical mallet.

New surgical technique and distraction osteogenesis for ankylosed dental movement.

Dental ankylosis often presents a significant vertical alveolar defect that is an esthetic problem for prosthetic rehabilitation. Moreover, surgical-orthodontic treatment by corticotomies and distraction devices provides special attention to avoid the loss of blood supply to the segment; furthermore, gingival recessions may appear because the gingival tissues cannot proliferate as fast as the immediate repositioning of the tooth. This case report presents a surgical technique for buccal, palatal, and vertical movements, and examines the effects of a tooth/arch-borne tooth distractor appliance, for the alignment of ankylosed teeth. The slow movements of tooth and bone block and fine cut simplifies orthodontic treatment in patients and makes it possible to achieve complex movements in a relatively short period. The reported dislocation procedure allows a use of buccal-lingual vertical osteotomy with horizontal osteotomy to correct tooth positions via bony block movement maintaining gingival tissues in position. The used sonic saw have proven to be a valuable alternative to manual or rotating tools, oscillating saws, or piezoelectric units because it is faster and easier for surgical approach.

Clinical study of flap design to increase the keratinized gingiva around implants: 4-year follow-up.

Since the presence of keratinized gingiva is so important for peri-implant outcome, the aim of this study is to describe a partial thickness flap design to increase the amount of keratinized peri-implant tissue as well as its thickness. A total of 131 implants were placed in 85 patients: 103 implants (78.63%) in the mandible and 28 implants (21.37%) in the maxilla. Before implant placement in edentulous ridge the residual keratinized mucosa usually was measured with a periodontal probe in a buccal-palatal direction. A palatal or lingual incision was made to raise a partial thickness flap with the residual keratinized tissue. After implant placement the flap was apically repositioned and secured with loose periosteal sutures. Keratinized tissue levels were calculated at baseline, at 6 months, and every year follow-up. Measurements were reported for each implant diameter. At 4-year follow-up, implant survival rate of 87.79% was reported. Peri-implant keratinized mucosa confirmed clinical gain in all cases; mean levels at 1- and 4-year follow-ups were 7.26 ± 2.01 mm and 7.37 ± 2.12 mm, respectively. The levels remained stable over time. This flap design allows immediate correction of adaptation of the keratinized tissue around the implant, increasing the thickness and amount of the keratinized tissue.

Immediate Loaded Full-Arch Mandibular Rehabilitations in Younger vs. Elderly Patients: A Comparative Retrospective Study with 7-Year Follow-Up.

The aim of this comparative retrospective clinical study was to assess the effect of age on immediate loaded full-arch mandibular rehabilitation in younger vs. elderly patients. Patients with an age between 45 and 60 years (younger group, YG) or with an age more or equal to 75 years (older group, OG), requiring a mandibular full-arch rehabilitation were scheduled for the present study. Implant and prosthetic failure, biological and prosthetic complications, and peri-implant marginal bone level changes were recorded until a 7-year follow-up. Sixty-six patients were included in the study; a total of 264 implants were placed and, in total, 66 "all-on-four" rehabilitations were delivered. In total, 33 patients were scheduled in the YG and 33 patients in the OG. At the 7-year follow-up, an overall implant failure rate of 1.14% was reported. Moreover, at the 7-year radiographic evaluation, peri-implant crestal bone loss averaged 1.12 ± 0.91 mm for the YG and 1.04 ± 1.01 mm for the OG. No statistically significant differences were found between the YG and OG except for the rate of peri-implantitis, which was statistically higher in the YG. The present study reported that immediate fixed mandibular full-arch rehabilitation is a viable procedure in elderly people of equal or more than 75 years of age.

Marginal Bone Loss Compared in Internal and External Implant Connections: Retrospective Clinical Study at 6-Years Follow-Up.

The aim of this study was to assess and compare the marginal bone loss between two different categories of implants (Winsix, Biosafin, Ancona, Italy) having the same diameter and belonging to the Torque Type® (TT®) line, in the internal hexagon version (TTi, Group A) and in the external hexagon configuration (TTx, Group B). Patients with one or more straight implants (insertion parallel to the occlusal plane) in the molar and premolar regions in association with tooth extraction at least 4 months prior to implant insertion, who have a fixture diameter of 3.8 mm, who followed up for at least 6 years, and whose radiographic records were available were enrolled in this study. Depending on implant connections (externally or internally), the sample was divided into groups A and B. For externally connected implants (66), the marginal resorption was 1.1 ± 0.17 mm. The subgroup of single and bridge implants showed no statistically significant differences with a marginal bone resorption of 1.07 ± 0.15 mm and 1.1 ± 0.17 mm, respectively. Internally connected implants (69) showed an overall marginal resorption of 0.91 ± 0.17 mm, while the subgroup of single and bridge implants showed resorption of 0.90 ± 0.19 mm and 0.90 ± 0.17 mm, respectively, with no statistically significant differences. According to the obtained results, internally connected implants showed less marginal bone resorption than externally connected implants.

Postoperative Bleeding in Patients Under Direct Oral Anticoagulation After Maxillary Sinus Floor Augmentation: A Case-Control Study.

PURPOSE: The aim of this case-control study was to investigate the occurrence of bleeding events related to maxillary sinus elevation with a lateral window in patients under direct oral anticogulant therapy. MATERIALS AND METHODS: Seventyseven consecutive patients were scheduled for unilateral maxillary sinus floor elevation using a lateral window approach. Participants were divided into two groups: group A, formed by 37 patients who were under novel oral anticoagulation therapy (rivaroxaban/apixaban), and a control group, composed of 40 healthy subjects. Within group A, assumption of direct oral anticoagulants was not suspended nor modified before surgical procedures. Time (early/delayed) and site (intraoral/extraoral) of bleeding episodes were recorded in both groups of patients, in addition to bleeding severity (mild, moderate, or severe). RESULTS: Maxillary sinus floor elevation was performed in all patients. One dropout happened due to intraoperative membrane perforation. Overall bleeding episodes were comparable in both groups, chi-square (1) = .68, P = .41. Early intraoral bleeding events were more common in absolute terms, but also occurred with approximately the same frequency in both group A and the control group (Fisher exact tests: P = 1.00 and P = .375, respectively). No severe bleeding was observed in any of the attended patients. CONCLUSION: Within the limitations of this case-control study, maxillary sinus floor augmentation with a lateral window approach can be safely administered to patients who are under direct oral anticoagulation therapy when specific recommendations are instituted.

Full Arch Implant-Prosthetic Rehabilitation in Patients with Type I Diabetes Mellitus: Retrospective Clinical Study with 10 Year Follow-Up.

The aim of this retrospective clinical study was to evaluate and compare implant survival, marginal bone loss, and clinical and prosthetic complications in healthy patients and patients with type I diabetes undergoing full arch implant-prosthetic rehabilitation. A total of 47 patients needing total fixed rehabilitation of one or both arches were enrolled for this study. Based on the absence of any systemic diseases (Group A) or the presence of type I diabetes (Group B), the sample was divided into two groups. According to the grade of bone atrophy in the posterior region, patients received full arch rehabilitation (of one or both jaws) with 6 axial implants or, if the residual posterior bone height was insufficient, All-on-Four rehabilitation and a total 236 dental implants were placed. Follow-up visits were performed 1 week after surgery, at 3 and 6 months and then once a year for the next 10 years. No statistically significant differences between groups were recorded about implant survival rates, marginal bone loss, or clinical and prosthetic complications. However, concerning complications, post-surgical bleeding and wound infection were recorded in Group A more than in Group B. In cases of compensated diabetes compensation, implant placement could be considered a safe procedure.

The Usage of an Air Purifier Device with HEPA 14 Filter during Dental Procedures in COVID-19 Pandemic: A Randomized Clinical Trial.

The aim of the present study was to evaluate the efficacy of an air purifier device (professional XXl inn-561 innoliving) with HEPA 14 filter in reducing the number of suspended particles generated during dental procedures as a vector of COVID-19 transmission. The survey was conducted on 80 individuals who underwent Oral Surgery with dental Hygiene Procedures, divided into two groups based on the operational risk classification related to dental procedures: a Test Group (with application of filtering device) and a Control Group (without filtering device). All procedures were monitored throughout the clinical controls, utilising professional tools such as molecular particle counters (Lasair III 350 L 9.50 L/min), bacteriological plates (Tryptic Soy Agar), sound meters for LAFp sound pressure level (SPL) and LCpk instantaneous peak level. The rate of suspended particles, microbiological pollution and noise pollution were calculated. SPSS software was used for statistical analysis method. The results showed the higher efficacy of the TEST Group on pollution abatement, 83% more than the Control fgroup. Additionally, the contamination was reduced by 69-80%. Noise pollution was not noticeable compared to the sounds already present in the clinical environment. The addition of PAC equipment to the already existing safety measures was found to be significantly effective in further microbiological risk reduction.

Prevalence and Periodontal Conditions of Developmental Grooves in an Italian School of Dentistry and Dental Hygiene: A Cross-Sectional Study.

Background: The aim of this cross-sectional study was to (i) determine the prevalence and distribution of developmental grooves in a young population and (ii) to evaluate the local periodontal conditions. Methods: Two hundred and fifty-one students with a mean age of 22.9 ± 4.7, attending the School of Dentistry and Dental Hygiene of Vita-Salute San Raffaele University (Milan, Italy) were included. The subjects underwent a clinical evaluation by two calibrated examiners. The following clinical parameters were recorded for each site presenting a radicular groove and for each corresponding site on an adjacent tooth used as control: probing pocket depth, plaque index, bleeding on probing, recession depth. Results: The prevalence of radicular grooves at patient and tooth level was 15.9% and 5%, respectively. When compared to control sites, the number of teeth with a radicular groove that presented plaque and bleeding on probing was higher. The logistic regression analysis showed that the presence of radicular grooves was significantly associated with the presence of plaque (OR, 6.14, p < 0.001) and of bleeding on probing (OR, 2.91, p = 0.01). Conclusions: The presence of radicular grooves increases the possibility of developing gingival inflammation by acting as a plaque retentive factor.

Tracheostomy in maxillofacial surgery: a simple and safe technique for residents in training.

BACKGROUND: Tracheostomy is a frequently performed surgical procedure and may be required under emergency, semiurgent, or elective conditions. In maxillofacial surgery, it is indicated in congenital, inflammatory, oncologic, or traumatic respiratory obstruction and prolonged intubation. This article presents a simplified tracheostomy procedure based on anatomic markers that gives the best compromise between minimum invasiveness and safety. PATIENTS AND METHODS: A retrospective study analyzed the clinical aspects, treatment methods, and clinical course of 198 patients who underwent tracheostomies performed by residents in training under the supervision of surgeons between October 2002 and December 2007 at the Maxillofacial Surgery Department of Carlo Poma Hospital, Mantova, and the Maxillofacial Unit, Head and Neck Department, University of Modena and Reggio Emilia, Italy. Tracheostomies were performed in 127 patients (64.14%) with neoplastic diseases (tumors of the tongue base, tonsils, and oral and pharyngeal regions) and in 71 patients with trauma (35.86%). The patients were followed up for 3 to 65 months. RESULTS: Acceptable clinical healing and outcomes were obtained in all patients. Intraoperative complications occurred in 35 patients (17.7%): bleeding in 32 patients (16.2%) and pretracheal or paratracheal tube placement in 3 patients (1.51%). Postoperative complications after tracheostomy closure included tracheostomy dehiscence in 5 patients (2.52%) and subcutaneous emphysema in 26 patients (13.12%). Tracheostomy dehiscence occurred in 3 patients with neoplasia (1.51%) and in 2 patients with trauma (1.01%). No symptomatic tracheal stenosis developed. CONCLUSIONS: The standardized surgical technique presented here reduces the associated surgical risk when the correct anatomic markers are used and important structures are recognized and handled correctly.

A retrospective preliminary histomorphometric and clinical investigation on sinus augmentation using enzyme-deantigenic, collagen-preserving equine bone granules and plasma rich in growth factors.

BACKGROUND: Enzyme-deantigenic equine bone (EDEB) is a substitute of autogenous bone. Mixing it with plasma rich in growth factors (PRGF) seems a viable option to achieve enhanced bone formation in alveolar bone augmentation surgeries. This retrospective study aims to first report the histomorphometric and clinical outcomes achieved when using the EDEB/PRGF mixture for performing sinus augmentation procedures followed by delayed implant placement. MATERIALS AND METHODS: Records of 11 patients who underwent 14 sinus augmentation surgeries using EDEB/PRGF followed by delayed implant placement were retrospectively collected and analyzed to assess histomorphometric data concerning newly formed bone (NFB) and residual biomaterial (RB) recorded at implant placement, marginal bone loss (MBL) values of implants placed in the augmented sinuses, and implant and prosthetic success and survival rates. RESULTS: At 5.6 ± 1.1 months after grafting, NFB and RB were 34.0 ± 9.1% and 11.3 ± 2.2% respectively, and no histologic signs of inflammation or immune reaction were observed in any of the 34 bone biopsies being collected. Further, 86.5 ± 4.3 months after implant placement, MBL was 0.40 ± 0.07 mm. No implant or prosthesis failed, and the implant success and survival rates were 100% CONCLUSIONS: Within the limitations of the present study, grafting EDEB/PRGF for lateral sinus augmentation and delayed implant placement seems to be safe. Compared to published data concerning EDEB alone, results of the present study do not suggest that the EDEB/PRGF combination may provide a histomorphometric or medium-/long-term clinical advantage.

Prevalence of peri-implantitis in a sample of HIV-positive patients.

OBJECTIVES: This study aimed to assess the prevalence of peri-implantitis in human immunodeficiency virus (HIV)-positive patients and the presence of a possible correlation between the immunological profile and serological values, of peri-implantitis, and of possible differences between all-on-4 and single crown/bridge prostheses. SUBJECTS AND METHODS: This retrospective study included 58 adult HIV-positive patients (222 implants) with either all-in-4 prostheses or single crowns/bridges on at least one dental implant loaded for more than a year who were followed for 3 year (mean follow-up). Data pertaining to the probing pocket depth (PPD), bleeding on probing, and immunological and systemic profile were collected. RESULTS: Patients with single crown/bridge implant rehabilitation showed higher prevalence of peri-implantitis (34%) than patients with all-on-4 rehabilitation (0%) (p = 0.012). Patients with all-on-4 rehabilitation were significantly older than those with single crowns/bridges (p = 0.004). Patients with peri-implantitis had implants for a significantly longer duration than those without (p = 0.001), implying that the probability of peri-implantitis increases as the age of implant increases. CONCLUSIONS: The prevalence of peri-implantitis was 26% in the HIV-positive patients population. No correlation was found between patients' immunological and serological factors and peri-implantitis. The most important risk factor for peri-implantitis and mucositis was implant age.