Genetic background of juniper (Juniperus spp.) consumption predicted by fecal near-infrared spectroscopy in divergently selected goats raised in harsh rangeland environments.

BACKGROUND: Junipers (Juniperus spp.) are woody native, invasive plants that have caused encroachment problems in the U.S. western rangelands, decreasing forage productivity and biodiversity. A potential solution to this issue is using goats in targeted grazing programs. However, junipers, which grow in dry and harsh environmental conditions, use chemical defense mechanisms to deter herbivores. Therefore, genetically selecting goats for increased juniper consumption is of great interest for regenerative rangeland management. In this context, the primary objectives of this study were to: 1) estimate variance components and genetic parameters for predicted juniper consumption in divergently selected Angora (ANG) and composite Boer x Spanish (BS) goat populations grazing on Western U.S. rangelands; and 2) to identify genomic regions, candidate genes, and biological pathways associated with juniper consumption in these goat populations. RESULTS: The average juniper consumption was 22.4% (± 18.7%) and 7.01% (± 12.1%) in the BS and ANG populations, respectively. The heritability estimates (realized heritability within parenthesis) for juniper consumption were 0.43 ± 0.02 (0.34 ± 0.06) and 0.19 ± 0.03 (0.13 ± 0.03) in BS and ANG, respectively, indicating that juniper consumption can be increased through genetic selection. The repeatability values of predicted juniper consumption were 0.45 for BS and 0.28 for ANG. A total of 571 significant SNP located within or close to 231 genes in BS, and 116 SNP related to 183 genes in ANG were identified based on the genome-wide association analyses. These genes are primarily associated with biological pathways and gene ontology terms related to olfactory receptors, intestinal absorption, and immunity response. CONCLUSIONS: These findings suggest that juniper consumption is a heritable trait of polygenic inheritance influenced by multiple genes of small effects. The genetic parameters calculated indicate that juniper consumption can be genetically improved in both goat populations.

Preliminary snapshot reveals a relationship between multidrug-resistance and biofilm production among enterobacteriaceae isolated from fecal samples of farm-raised poultry in ceará, Brazil.

Antimicrobial resistance and biofilm formation by microbial pathogens pose a significant challenge to poultry production systems due to the persistent risk of dissemination and compromise of bird health and productivity. In this context, the study aimed to investigate the occurrence of different multiresistance phenotypes and the biofilm-forming ability of Enterobacteriaceae isolated from broiler chicken excreta in poultry production units in Ceará, Brazil. Samples were collected from three distinct broiler breeding facilities and subjected to isolation, identification, antibiotic susceptibility testing, phenotypic screening for ß-lactamases enzymes, and biofilm formation evaluation. Seventy-one strains were identified, being Escherichia coli (37 %) and Proteus mirabilis (32 %), followed by Klebsiella pneumoniae (11 %), Providencia stuartii (9 %), Klebsiella aerogenes (6 %), Alcaligenes faecalis (4 %), and Salmonella sp. (1 %). A significant proportion (87 %) of multiresistant strains were detected. For the phenotypic evaluation of ß-lactamases production, strains with resistance to second and third-generation cephalosporins and carbapenems were tested. About 4 of 6 and 10 of 26 were positive for inducible chromosomal AmpC ß-lactamase and extended-spectrum ß-lactamase (ESBL), respectively. Regarding biofilm formation, it was observed that all MDR strains were capable of forming biofilm. In this sense the potential of these MDR bacteria to develop biofilms becomes a significant concern, representing a real threat to both human and animal health, as biofilms offer stability, antimicrobial protection, and facilitate genetic transfer.

Superior bioavailability of the calcium salt form of ß-hydroxy-ß-methylbutyrate compared with the free acid form.

We investigated the bioavailability of the calcium salt (HMB-Ca) and the free acid (HMB-FA) forms of ß-hydroxy-ß-methylbutyrate (HMB). Sixteen young individuals received the following treatments on three different occasions in a counterbalanced crossover fashion: (1) HMB-FA in clear capsules; (2) HMB-Ca in gelatine capsules; (3) HMB-Ca dissolved in water. All treatments provided 1 g of HMB. Blood samples were taken before and on multiple time points following ingestion. The following parameters were calculated: peak plasma (Cmax), time to peak (Tmax), slope of HMB appearance in blood, area under the curve (AUC), half-life time (t1/2) and relative bioavailability (HMB-Ca in water set as reference). All treatments led to rapid and large increases in plasma HMB. HMB-Ca in capsules and in water showed similar plasma HMB values across time (p = 0.438). HMB-FA resulted in lower concentrations vs. the other treatments (both p < 0.001). AUC (HMB-Ca in capsules: 50,078 ± 10,507; HMB-Ca in water: 47,871 ± 10,783; HMB-FA: 29,130 ± 12,946 µmol L-1 × 720 min), Cmax (HMB-Ca in capsules: 229.2 ± 65.9; HMB-Ca in water: 249.7 ± 49.7; HMB-FA: 139.1 ± 67.2 µmol L-1) and relative bioavailability (HMB-Ca in capsules: 104.8 ± 14.9%; HMB-FA: 61.5 ± 17.0%) were lower in HMB-FA vs. HMB-Ca (all p < 0.001). HMB-Ca in water resulted in the fastest Tmax (43 ± 22 min) compared to HMB-Ca in capsules (79 ± 40 min) and HMB-FA (78 ± 21 min) (all p < 0.05), while t1/2 was similar between treatments. To conclude, HMB-Ca exhibited superior bioavailability compared to HMB-FA, with HMB-Ca in water showing faster absorption. Elimination kinetics were similar across all forms, suggesting that the pharmaceutical form of HMB affects the absorption rates, but not its distribution or elimination.

Genetic parameters for novel climatic resilience indicators derived from automatically-recorded vaginal temperature in lactating sows under heat stress conditions.

BACKGROUND: Longitudinal records of automatically-recorded vaginal temperature (TV) could be a key source of data for deriving novel indicators of climatic resilience (CR) for breeding more resilient pigs, especially during lactation when sows are at an increased risk of suffering from heat stress (HS). Therefore, we derived 15 CR indicators based on the variability in TV in lactating sows and estimated their genetic parameters. We also investigated their genetic relationship with sows' key reproductive traits. RESULTS: The heritability estimates of the CR traits ranged from 0.000 ± 0.000 for slope for decreased rate of TV (SlopeDe) to 0.291 ± 0.047 for sum of TV values below the HS threshold (HSUB). Moderate to high genetic correlations (from 0.508 ± 0.056 to 0.998 ± 0.137) and Spearman rank correlations (from 0.431 to 1.000) between genomic estimated breeding values (GEBV) were observed for five CR indicators, i.e. HS duration (HSD), the normalized median multiplied by normalized variance (Nor_medvar), the highest TV value of each measurement day for each individual (MaxTv), and the sum of the TV values above (HSUA) and below (HSUB) the HS threshold. These five CR indicators were lowly to moderately genetically correlated with shoulder skin surface temperature (from 0.139 ± 0.008 to 0.478 ± 0.048) and respiration rate (from 0.079 ± 0.011 to 0.502 ± 0.098). The genetic correlations between these five selected CR indicators and sow reproductive performance traits ranged from - 0.733 to - 0.175 for total number of piglets born alive, from - 0.733 to - 0.175 for total number of piglets born, and from - 0.434 to - 0.169 for number of pigs weaned. The individuals with the highest GEBV (most climate-sensitive) had higher mean skin surface temperature, respiration rate (RR), panting score (PS), and hair density, but had lower mean body condition scores compared to those with the lowest GEBV (most climate-resilient). CONCLUSIONS: Most of the CR indicators evaluated are heritable with substantial additive genetic variance. Five of them, i.e. HSD, MaxTv, HSUA, HSUB, and Nor_medvar share similar underlying genetic mechanisms. In addition, individuals with higher CR indicators are more likely to exhibit better HS-related physiological responses, higher body condition scores, and improved reproductive performance under hot conditions. These findings highlight the potential benefits of genetically selecting more heat-tolerant individuals based on CR indicators.

Conserved Population Dynamics in the Cerebro-Cerebellar System between Waking and Sleep.

Despite the importance of the cerebellum for motor learning, and the recognized role of sleep in motor memory consolidation, surprisingly little is known about neural activity in the sleeping cerebro-cerebellar system. Here, we used wireless recording from primary motor cortex (M1) and the cerebellum in three female monkeys to examine the relationship between patterns of single-unit spiking activity observed during waking behavior and in natural sleep. Across the population of recorded units, we observed similarities in the timing of firing relative to local field potential features associated with both movements during waking and up state during sleep. We also observed a consistent pattern of asymmetry in pairwise cross-correlograms, indicative of preserved sequential firing in both wake and sleep at low frequencies. Despite the overall similarity in population dynamics between wake and sleep, there was a global change in the timing of cerebellar activity relative to motor cortex, from contemporaneous in the awake state to motor cortex preceding the cerebellum in sleep. We speculate that similar population dynamics in waking and sleep may imply that cerebellar internal models are activated in both states, despite the absence of movement when asleep. Moreover, spindle frequency coherence between the cerebellum and motor cortex may provide a mechanism for cerebellar computations to influence sleep-dependent learning processes in the motor cortex.SIGNIFICANCE STATEMENT It is well known that sleep can lead to improved motor performance. One possibility is that off-line learning results from neural activity during sleep in brain areas responsible for the control of movement. In this study we show for the first time that neuronal patterns in the cerebro-cerebellar system are conserved during both movements and sleep up-states, albeit with a shift in the relative timing between areas. Additionally, we show the presence of simultaneous M1-cerebellar spike coherence at spindle frequencies associated with up-state replay and postulate that this is a mechanism whereby a cerebellar internal model can shape plasticity in neocortical circuits during sleep.

Genetic parameters for various semen production and quality traits and indicators of male and female reproductive performance in Nellore cattle.

BACKGROUND: Given the economic relevance of fertility and reproductive traits for the beef cattle industry, investigating their genetic background and developing effective breeding strategies are paramount. Considering their late and sex-dependent phenotypic expression, genomic information can contribute to speed up the rates of genetic progress per year. In this context, the main objectives of this study were to estimate variance components and genetic parameters, including heritability and genetic correlations, for fertility, female precocity, and semen production and quality (andrological attributes) traits in Nellore cattle incorporating genomic information. RESULTS: The heritability estimates of semen quality traits were low-to-moderate, while moderate-to-high estimates were observed for semen morphological traits. The heritability of semen defects ranged from low (0.04 for minor semen defects) to moderate (0.30 for total semen defects). For seminal aspect (SMN_ASPC) and bull reproductive fitness (BULL_FIT), low (0.19) and high (0.69) heritabilities were observed, respectively. The heritability estimates for female reproductive traits ranged from 0.16 to 0.39 for rebreeding of precocious females (REBA) and probability of pregnancy at 14 months (PP14), respectively. Semen quality traits were highly genetically correlated among themselves. Moderate-to-high genetic correlations were observed between the ability to remain productive in the herd until four years of age (stayability; STAY) and the other reproductive traits, indicating that selection for female reproductive performance will indirectly contribute to increasing fertility rates. High genetic correlations between BULL_FIT and female reproductive traits related to precocity (REBA and PP14) and STAY were observed. The genetic correlations between semen quality and spermatic morphology with female reproductive traits ranged from -0.22 (REBA and scrotal circumference) to 0.48 (REBA and sperm vigor). In addition, the genetic correlations between REBA with semen quality traits ranged from -0.23 to 0.48, and with the spermatic morphology traits it ranged from -0.22 to 0.19. CONCLUSIONS: All male and female fertility and reproduction traits evaluated are heritable and can be improved through direct genetic or genomic selection. Selection for better sperm quality will positively influence the fertility and precocity of Nellore females. The findings of this study will serve as background information for designing breeding programs for genetically improving semen production and quality and reproductive performance in Nellore cattle.

Cardiovascular events in patients with coronary artery disease with and without myocardial ischemia: Long-term follow-up.

BACKGROUND: After the results of the ISCHEMIA Trial, the role of myocardial ischemia in the prognosis of coronary artery disease (CAD) was under debate. We sought to comparatively evaluate the long-term prognosis of patients with multivessel CAD with or without documented myocardial ischemia. METHODS: This is a single-center, retrospective, observational cohort study that included patients with CAD obtained from the research protocols database of "The Medicine, Angioplasty or Surgery Study," the MASS Study Group. Patients were stratified according to the presence or absence of myocardial ischemia. Cardiovascular events (overall mortality and myocardial infarction) were tracked from the registry entry up to a median follow-up of 8.7 years. Myocardial ischemia was assessed at baseline by a functional test with or without imaging. RESULTS: From 1995 to 2018, 2015 patients with multivessel CAD were included. Of these, 1001 presented with conclusive tests at registry entry, 790 (79%) presenting with ischemia and 211 (21%) without ischemia. The median follow-up was 8.7 years (IQR 4.04 to 10.07). The primary outcome occurred in 228 (28.9%) patients with ischemia and in 64 (30.3%) patients without ischemia (plog-rank=0.60). No significant interaction was observed with the presence of myocardial ischemia and treatment strategies in the occurrence of the combined primary outcome (pinteration=0.14). CONCLUSIONS: In this sample, myocardial ischemia was not associated with a worse prognosis compared with no ischemia in patients with multivessel CAD. These results refer to debates about the role of myocardial ischemia in the occurrence of cardiovascular events.

Genomic epidemiology of SARS-CoV-2 in large university hospital cohort: the UnCoVER-Brazil project.

This work aimed to study the role of different SARS-CoV-2 lineages in the epidemiology of multiple waves of the COVID-19 pandemic in Ribeirão Preto (São Paulo state), with comparison within Brazil and globally. Viral genomic sequencing was combined with clinical and sociodemographic information of 2,379 subjects at a large Brazilian hospital. On the whole 2,395 complete SARS-CoV-2 genomes were obtained from April 2020 to January 2022. We report variants of concern (VOC) and interest (VOI) dynamics and the role of Brazilian lineages. We identified three World Health Organization VOCs (Gamma, Delta, Omicron) and one VOI (Zeta), which caused distinct waves in this cohort. We also identified 47 distinct Pango lineages. Consistent with the high prevalence of Gamma in Brazil, Pango lineage P.1 dominated infections in this cohort for half of 2021. Each wave of infection largely consisted of a single variant group, with each new group quickly and completely rising to dominance. Despite increasing vaccination in Brazil starting in 2021, this pattern was observed throughout the study and is consistent with the hypothesis that herd immunity tends to be SARS-CoV-2 variant-specific and does not broadly protect against COVID-19.

Influence of genetics on the occurrence of enamel hypomineralization affecting permanent and primary teeth: A scoping review.

BACKGROUND: Molar incisor hypomineralization (MIH) is prevalent worldwide and is a challenge for clinicians who provide oral care to children. Molar incisor hypomineralization has been considered a multifactorial disturbance that results from a combination of environmental and genetic factors. AIM: This scoping review followed the Joanna Briggs Institute protocol and aimed to identify the available evidence of the genetic influence on the etiology of MIH. DESIGN: The search strategy was conducted in multiple databases, including PubMed, BVS, Embase, Web of Science, and Scopus. Two trained reviewers, requiring a third reviewer in case of disagreements, collected evidence. RESULTS: Of 563 retrieved studies, 17 were included in the review. From 14 studies performed in humans, 10 investigated DNA polymorphisms, one analyzed DNA methylation, one aimed model of inheritance, and two focused on the phenotype in twins or in the family. Three animal studies were based on the null expression of genes. CONCLUSION: This scoping review, based on the studies that used different methodologies, reinforces the hypothesis of a genetic contribution to the multifactorial etiology of MIH. The available data are limited in terms of size and origin of the samples. Hence, further genetic studies are still required.

Removal of mandibular third molars displaced to deep fascial spaces: case reports.

This article reports the treatment of 2 cases of mandibular third molar displacement into deep fascial spaces during attempted extraction, 1 of which resulted in acute infection. In addition to treatment approaches, the article reviews the risk factors for tooth displacement and techniques that may be used for its prevention. In both of the reported cases, after tooth extraction procedures resulted in the displacement of a third molar, the correct location of the tooth was ascertained by 3-dimensional imaging. The displaced tooth was removed via intraoral access while the patient wasunder general anesthesia. Both patients healed without postsurgical complications, confirming the success of the treatment.

Long-Term Symptoms among COVID-19 Survivors in Prospective Cohort Study, Brazil.

We conducted a prospective cohort study in a population with diverse ethnic backgrounds from Brazil to assess clinically meaningful symptoms after surviving coronavirus disease. For most of the 175 patients in the study, clinically meaningful symptoms, including fatigue, dyspnea, cough, headache, and muscle weakness, persisted for >120 days after disease onset.

Real-time data analysis in health monitoring systems: A comprehensive systematic literature review.

Health monitoring systems (HMSs) capture physiological measurements through biosensors (sensing), obtain significant properties and measures from the output signal (perceiving), use algorithms for data analysis (reasoning), and trigger warnings or alarms (acting) when an emergency occurs. These systems have the potential to enhance health care delivery in different application domains, showing promising benefits for health diagnosis, early symptom detection, disease prediction, among others. However, the implementation of HMS presents challenges for sensing, perceiving, reasoning, and acting based on monitored data, mainly when data processing should be performed in real time. Thus, the quality of these diagnoses relies heavily on the data and data analysis methods applied. Data mining techniques have been broadly investigated in health systems; however, it is not clear what real-time data analysis techniques are best suited for each context. This work carries out a search in five scientific electronic databases to identify recent studies that investigated HMS using real-time data analysis techniques. Thirty-six research studies were selected after screening 2,822 works. Applied data analysis methods, application domains, utilized sensors, physiological parameters, extracted features, claimed benefits, limitations, datasets used, and published results were described, compared and analyzed. The findings indicate that machine learning methods are trending in such studies. There is no universal solution for all health domains; however, support vector machines are a predominant method. Among the application domains, cardiovascular disease is the most investigated. Most reviewed studies reported improvements in performing data mining tasks or operational modes of solutions. Although studies tested algorithms and presented promising results, those are particular for each experiment. This review gives a comprehensive overview of HMS real-time data analysis and points to directions for future research.

Prey-size plastics are invading larval fish nurseries.

Life for many of the world's marine fish begins at the ocean surface. Ocean conditions dictate food availability and govern survivorship, yet little is known about the habitat preferences of larval fish during this highly vulnerable life-history stage. Here we show that surface slicks, a ubiquitous coastal ocean convergence feature, are important nurseries for larval fish from many ocean habitats at ecosystem scales. Slicks had higher densities of marine phytoplankton (1.7-fold), zooplankton (larval fish prey; 3.7-fold), and larval fish (8.1-fold) than nearby ambient waters across our study region in Hawai'i. Slicks contained larger, more well-developed individuals with competent swimming abilities compared to ambient waters, suggesting a physiological benefit to increased prey resources. Slicks also disproportionately accumulated prey-size plastics, resulting in a 60-fold higher ratio of plastics to larval fish prey than nearby waters. Dissections of hundreds of larval fish found that 8.6% of individuals in slicks had ingested plastics, a 2.3-fold higher occurrence than larval fish from ambient waters. Plastics were found in 7 of 8 families dissected, including swordfish (Xiphiidae), a commercially targeted species, and flying fish (Exocoetidae), a principal prey item for tuna and seabirds. Scaling up across an ∼1,000 km2 coastal ecosystem in Hawai'i revealed slicks occupied only 8.3% of ocean surface habitat but contained 42.3% of all neustonic larval fish and 91.8% of all floating plastics. The ingestion of plastics by larval fish could reduce survivorship, compounding threats to fisheries productivity posed by overfishing, climate change, and habitat loss.

Active Vegetarians Show Better Lower Limb Strength and Power than Active Omnivores.

Vegetarian diets have become popular among athletes and active individuals and can have advantages for physical performance, but the results are still conflicting regarding muscle strength and power. The aim of this study was to evaluate the diet and physical performance of vegetarians through tests of dynamic, isometric, and relative strength; muscle power; and aerobic capacity. In this cross-sectional study, 32 vegetarians and 26 omnivores, who were physically active, were evaluated for the Healthy Eating Index and performance tested back squat, handgrip strength, isometric deadlift strength, jump with countermovement, and maximum aerobic speed (MAS). Improved diet quality (63.24±14.40 vs. 54±16.80, p<0.05), greater relative strength (1.03±0.23 vs. 0.91±0.12, p<0.05), and greater jump height (43.77±9.91 vs. 38.45±8.92, p<0.05) were found among vegetarians. No difference was seen in MAS (13.5±2 vs. 11±3, p>0.05) or isometric strength of upper limbs (77±29 vs. 70±50, p>0.05) and lower limbs (89±41 vs. 97±50, p>0.05). Thus, we conclude that vegetarians and omnivores show similar performance in strength and aerobic capacity, but in our sample, vegetarians show higher levels of relative strength and power.

Himatanthus bracteatus-Composed In Situ Polymerizable Hydrogel for Wound Healing.

The Himatanthus genus presents anti-inflammatory, antioxidant activities, suggesting potential wound-healing properties. This study aimed to develop and analyze the wound-healing properties of a photopolymerizable gelatin-based hydrogel (GelMA) containing an ethanolic extract of Himatanthus bracteatus in a murine model. The extract was obtained under high pressure conditions, incorporated (2%) into the GelMA (GelMA-HB), and physically characterized. The anti-inflammatory activity of the extract was assessed using a carrageenan-induced pleurisy model and the GelMA-HB scarring properties in a wound-healing assay. The extract reduced IL-1ß and TNF-α levels (48.5 ± 6.7 and 64.1 ± 4.9 pg/mL) compared to the vehicle (94.4 ± 2.3 pg/mL and 106.3 ± 5.7 pg/mL; p < 0.001). GelMA-HB depicted significantly lower swelling and increased resistance to mechanical compression compared to GelMA (p < 0.05). GelMA-HB accelerated wound closure over the time course of the experiment (p < 0.05) and promoted a significantly greater peak of myofibroblast differentiation (36.1 ± 6.6 cells) and microvascular density (23.1 ± 0.7 microvessels) on day 7 in comparison to GelMA (31.9 ± 5.3 cells and 20.2 ± 0.6 microvessels) and the control (25.8 ± 4.6 cells and 17.5 ± 0.5 microvessels) (p < 0.05). In conclusion, GelMA-HB improved wound healing in rodents, probably by modulating the inflammatory response and myofibroblastic and microvascular differentiation.

Do low-cost 3-dimensional printers produce suitable dental models?

INTRODUCTION: When choosing a 3-dimensional printer for dental models, the cost-benefit ratio should be evaluated. The purpose of this study was to evaluate the accuracy, precision, cost, and time taken to prepare and print using different low-cost techniques (2 digital light processing [DLP] and 1 fused filament fabrication [FFF] printer) compared with the reference proven to be clinically accepted (PolyJet). METHODS: For this purpose, the upper and lower virtual models of 5 patients were printed using: (1) DLP printer Moonray, (2) DLP printer Anycubic, (3) DLP printer Moonray with Anycubic resin, (4) Filament printer UpMini 2 (FFF), and (5) Polyjet printer Objet Eden500V. One of the virtual models was also printed 4 consecutive times on each printer to allow consistency assessment. Afterward, the 14 printed resin models were scanned, and their accuracy was evaluated by model superimposition using Geomagic Qualify software (3D Systems, Rock Hill, SC). A digital caliper was also used to obtain linear measurements. All measurements were carried out by a calibrated examiner. RESULTS: The results showed that all printers produced similar results, although Moonray with Anycubic resin showed loss of accuracy and Anycubic showed inconsistent vertical dimensions. The printing cost and time consumed from each pair of models were calculated for the overall printing process, analyzing which would have the best cost-benefit ratio. CONCLUSIONS: Polyjet printing was considered the fastest method but with the highest cost. FFF printing was the lowest printing and input cost but was considerably more time-consuming. There was a balance in both DLP printers, and they were considered the best cost-benefit ratio for small independent dental offices.

Novel Hg (II) selective fluorescent green sensor based on carbon dots synthesized from starch and functionalized with methimazole.

We describe a green new method for the synthesis of water-soluble photoluminescent carbon dots (CDs) that were functionalized with methimazole (MTZ) and applied to determine Hg2+ based on the fluorescence extinction. Starch obtained from rice was used as a natural source for the production of CDs by hydrothermal treatment. Also, it was proposed a factorial design to optimize the parameters for CD synthesis and the results showed that the luminescence intensity is a function of temperature and not of the heating time in the hydrothermal process. The synthesized CDs were characterized using fluorescence techniques, Fourier transform infrared spectroscopy (FTIR), and UV-Vis spectroscopy. Through transmission electron microscopy (TEM) and dynamic light scattering (DLS), it was found the formation of CDs on a nanometer scale with an average size of 11 nm. The functionalization with MTZ, eliminated all interferences from other metals, indicating a selective response to Hg2+ ions. The method was applied to Hg2+ determination in waters. Under optimal conditions, was obtained a limit of detection of 1.8 × 10-7 mol L-1 with a linear range from 3.3 × 10-7 to 50.0 × 10-6 mol L-1. Therefore, the proposed method can be considered a simple, selective, and precise alternative that minimizes the number of reagents used for Hg2+ determination in natural waters, and can be applied on a large scale in environmental analyzes.

Sequential Neural Activity in Primary Motor Cortex during Sleep.

Sequential firing of neurons during sleep is thought to play a role in the consolidation of learning. However, direct evidence for such sequence replay is limited to only a few brain areas and sleep states mainly in rodents. Using a custom-designed wearable neural data logger and chronically implanted electrodes, we made long-term recordings of neural activity in the primary motor cortex of two female nonhuman primates during free behavior and natural sleep. We used the local field potential (LFP) spectrogram to characterize sleep cycles, and examined firing rates, correlations, and sequential firing of neurons at different frequency bands through the cycle. Slow-wave sleep (SWS) was characterized by low neural firing rates and high synchrony, reflecting slow oscillations between cortical down and up states. However, the order in which neurons entered up states was similar to the sequence of neural activity observed at low frequencies during waking behavior. In addition, we found evidence of brief bursts of theta oscillation, associated with non-SWS states, during which neurons fired in strikingly regular sequential order phase-locked to the LFP. Theta sequences were preserved between waking and sleep, but appeared not to resemble the order of neural activity observed at lower frequencies. The sequential firing of neurons during slow oscillations and theta bursts may contribute to the consolidation of procedural memories during sleep.SIGNIFICANCE STATEMENT Replay of sequential neural activity during sleep is believed to support consolidation of daytime learning. Despite a wealth of studies investigating sequential replay in association with episodic and spatial memory, it is unknown whether similar sequences occur in motor areas during sleep. Within long-term neural recordings from monkey motor cortex, we found two distinct patterns of sequential activity during different phases of the natural sleep cycle. Slow-wave sleep was associated with delta-band sequences that resembled low-frequency activity during movement, while occasional brief bursts of theta oscillation were associated with a different order of sequential firing. Our results are the first report of sequential sleep replay in the motor cortex, which may play an important role in consolidation of procedural learning.

Poor sleep quality associates with self-reported psychiatric and cardiometabolic symptoms independently of sleep timing patterns in a large sample of rural and urban workers.

Poor sleep associates with mental and cardiometabolic pathological outcomes. The participation of sleep timing features in the pathways by which this relationship occurs is not clear. This study aims to evaluate the interrelationship between sleep quality and self-reported psychiatric/cardiometabolic symptoms, considering mediation and moderation effects of sleep timing patterns, and urban versus rural work environment, respectively; and to verify the association between sleep quality and polymorphisms of AANAT, RORA and TIMELESS genes. An epidemiological survey was performed in a rural area in southern Brazil. Eight-hundred and twenty-nine subjects were evaluated for sleep quality using the Pittsburgh Sleep Quality Index, and sleep timing patterns using the Munich Chronotype Questionnaire. Work characteristics and psychiatric/cardiometabolic symptoms were assessed using a structured self-report questionnaire. Three polymorphisms of AANAT, RORA and TIMELESS (rs3760138, rs782931 and rs774045, respectively) were genotyped in blood samples. We found statistically significant associations of poor sleep quality with self-reported psychiatric symptoms (B = 0.382; 95% CI 0.289-0.476; adjusted p-value <.001), and with self-reported cardiometabolic symptoms (B = 0.079; 95% CI 0.013-0.151; adjusted p-value = .048). The genetic analysis showed that RORA GA/AA genotype was associated to poor sleep quality (B = 0.146, 95% CI 0.054-0.239; adjusted p-value = .004). No moderated mediation effects were observed in the conditional analysis. TIMELESS polymorphism was not included in the analysis due to the low frequency of risk genotypes. These results yield new insights regarding the interrelationship between sleep characteristics and psychiatric/cardiometabolic self-reported symptoms, taking into account genes related to the biological clocks and melatonin pathways.

Measurement of the bone height of mandibular incisors and canines on computed tomography-Limitations according to bone thickness.

AIM: To verify the correlation between cone beam CT (CBCT) and spiral CT (SCT) images and direct measurement of the bone height and to verify whether bone thickness (BT) influences the accuracy of bone height measurement on CT. SETTING AND SAMPLE: One hundred and fourteen measurements were obtained in 10 dry human mandibles. MATERIALS AND METHODS: The alveolar bone height was measured on volumetric and linear images. RESULTS: Negative, average and significant correlations (-0.622** to -0.489**) were verified between BT and the absolute error. When the alveolar bone thickness was at least 0.6 mm, the mean differences were 0.16 and 0.28 mm on linear images and 0.12 and 0.03 mm on volumetric images for CBCT and SCT. Additionally, these values ranged from -0.46 to 0.79 and -0.32 to 0.88 mm on linear images and from -0.64 to 0.67 and -0.57 to 0.62 mm on volumetric images for CBCT and SCT. When the alveolar bone thickness was less than 0.6 mm, the CT evaluation varied from -1.74 to 5.42 and -1.64 to 5.42 mm on linear images and from -3.70 to 4.28 mm and -3.49 to 4.25 mm on volumetric images for CBCT and SCT. CONCLUSIONS: Spiral CT and CBCT images demonstrate significant correlation with direct measurement for the alveolar bone height. Measurement of the alveolar bone labial and lingual to the mandibular incisors and canines presented higher accuracy when its thickness was greater than 0.6 mm. When the thickness was less than 0.6 mm, bone dehiscence can be diagnosed despite bone being clinically present.