Use of atmospheric pressure solids analysis probe time-of-flight mass spectrometry to screen for plasticisers in gaskets used in contact with foods.

RATIONALE: Plasticisers are used in the PVC gaskets of metal closures on glass jars and bottles used for foods and beverages. They may migrate and so contaminate the packed foodstuff. The plasticisers are present in a high proportion and are often a complex mixture of substances leading to time-consuming analytical methodologies. This work describes a rapid screening method to identify the plasticisers used. METHODS: Analysis was carried out by direct sampling of the gaskets using atmospheric pressure solids analysis probe (ASAP) with time-of-flight (TOF) mass spectrometry (MS) using a SYNAPT G2 HDMS system. The accurate mass information collected was then compared to a user-prepared database of plasticisers to aid identification. RESULTS: The rapid identification approach was shown to be successful for 24 gasket samples previously analysed by alternative more lengthy gas chromatographic (GC) methods. Quantification by dissolution followed by standard addition was also demonstrated to be reliable. CONCLUSIONS: The ASAP-TOFMS method is a useful technique for rapidly screening gaskets for the presence of plasticisers. It can be used to identify specific gaskets deserving of further quantitative analysis by chromatographic methods, saving time and money by avoiding unnecessary analyses. Copyright © 2015 John Wiley & Sons, Ltd.

Safety assessment of the substances 'wax, rice bran, oxidised' and 'wax, rice bran, oxidised, calcium salt' for use in food contact materials.

The EFSA Panel on Food Contact Materials (FCM) assessed the safety of the substances 'wax, rice bran, oxidised' and 'wax, rice bran, oxidised, calcium salt', used as additives up to 0.3% in polyethylene terephthalate (PET), polyamide (PA), thermoplastic polyurethane (TPU), polylactic acid (PLA) and poly(vinyl chloride) (PVC) in contact with all food types for long-term storage at room temperature and below, after hot-fill and/or heating. The substances consist of the chemical classes wax esters, carboxylic acids, alcohols and calcium salts of acids, along with an unidentified organic fraction up to ■■■■■ w/w. Migration into 10% ethanol and 4% acetic acid was below 0.012 mg/kg for each chemical class, and about 0.001 mg/kg for the unidentified fraction. In isooctane, migration was up to 0.297 mg/kg food for wax esters, below 0.01 mg/kg food for the other chemical classes and about 0.02 mg/kg food for the unidentified fraction. The contact with dry food and food simulated by 20% ethanol were considered covered by the migration tests with aqueous simulants. Based on genotoxicity assays and compositional analyses, the constituents of the chemical classes did not raise a concern for genotoxicity. The potential migration of individual constituents or groups of chemically-related compounds of the unidentified fraction would result in exposures below (for aqueous food) and above (for fatty food) the threshold of toxicological concern for genotoxic carcinogens. Therefore, the FCM Panel concluded that the substances are not of safety concern for the consumer, if used as additives up to 0.3% w/w in PET, PLA and rigid PVC materials and articles intended for contact with all food types except for fatty foods, for long-term storage at room temperature and below, including hot-fill and/or heating up to 100°C for up to 2 h.

Flavouring Group Evaluation 413 (FGE.413): Naringenin.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of naringenin [FL-no: 16.132] as a new flavouring substance, in accordance with Regulation (EC) No 1331/2008. No other substances with sufficient structural similarity have been identified in existing FGEs that could be used to support a read-across approach. The information provided on the manufacturing process, the composition and the stability of [FL-no: 16.132] was considered sufficient. From studies carried out with naringenin, the Panel concluded that there is no concern with respect to genotoxicity. The use of naringenin as a flavouring substance at added portions exposure technique (APET) exposure levels is unlikely to pose a risk for drug interaction. For the toxicological evaluation of naringenin, the Panel requested an extended one-generation toxicity study on naringenin, in line with the requirements of the Procedure and to investigate the consequence of a possible endocrine-disrupting activity. The Panel considered that changes in thymus weight, litter size, post-implantation loss and a consistent reduced pup weight in the high-dose F2 generation could not be dismissed and selected therefore, the mid-dose of 1320 mg/kg body weight (bw) per day for the parental males as the no observed adverse effect level (NOAEL) of the study. The exposure estimates for [FL-no: 16.132] (31,500 and 50,000 µg/person per day for children and adults, respectively) were above the threshold of toxicological of concern (TTC) for its structural class (III). Using the NOAEL of 1320 mg/kg bw per day at step A4 of the procedure, margins of exposure (MoE) of 1590 and 630 could be calculated for adults and children, respectively. Based on the calculated MoEs, the Panel concluded that the use of naringenin as a flavouring substance does not raise a safety concern.

Re-evaluation of guar gum (E 412) as a food additive in foods for infants below 16 weeks of age and follow-up of its re-evaluation as food additive for uses in foods for all population groups.

Guar gum (E 412) was re-evaluated in 2017 by the former EFSA Panel on Food Additives and Nutrient sources added to Food (ANS). As a follow-up to this assessment, the Panel on Food Additives and Flavourings (FAF) was requested to assess the safety of guar gum (E 412) for its uses as food additive in food for infants below 16 weeks of age belonging to food categories 13.1.1 (Infant formulae) and 13.1.5.1 (Dietary foods for infants for special medical purposes and special formulae for infants). In addition, the FAF Panel was requested to address the issues already identified during the re-evaluation of the food additive when used in food for the general population. The process involved the publication of a call for data to allow the interested business operators to provide the requested information to complete the risk assessment. In the response to EFSA requests, one IBO stated that E 412 is not used in food categories 13.1.1 and 13.1.5.1, but it is present in products under food category 13.1.5.2. The Panel concluded that the submitted data are not sufficient to support the safe use of guar gum (E 412) in food for infants (below and above 16 weeks of age) and young children under FC 13.1.1, 13.1.5.1 and 13.1.5.2. Additionally, the Panel concluded that the technical data provided by the IBO support further amendments of the specifications for E 412 laid down in Commission Regulation (EU) No 231/2012.

Flavouring group evaluation 419 (FGE.419): 2-methyl-1-(2-(5-(p-tolyl)-1H-imidazol-2-yl)piperidin-1-yl)butan-1-one.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of 2-methyl-1-(2-(5-(p-tolyl)-1H-imidazol-2-yl)piperidin-1-yl)butan-1-one [FL-no: 16.134] as a new flavouring substance, in accordance with Regulation (EC) No 1331/2008. The substance has not been reported to occur naturally and is chemically synthesised. In food, it is intended to be used as a flavouring substance only in chewing gum. The chronic dietary exposure to [FL-no: 16.134] was estimated to be 45 µg/person per day for a 60-kg adult and 28.4 µg/person per day for a 15-kg 3-year-old child. [FL-no: 16.134] did not show genotoxicity in a bacterial reverse mutation test and an in vitro mammalian cell micronucleus assay. Based on the submitted toxicokinetic and metabolism data, it can be predicted that the flavouring substance is metabolised to innocuous products only. The Panel derived a lower confidence limit of the benchmark dose (BMDL) of 0.71 mg/kg bw per day for a 20% increase in the relative thyroid (including parathyroid) weight observed in a 90-day toxicity study in rats. Based on this BMDL, adequate margins of exposure of 887 and 374 could be calculated for adults and children, respectively. The Panel concluded that there is no safety concern for [FL-no: 16.134], when used as a flavouring substance at the estimated level of dietary exposure, based on the intended use and use levels as specified in Appendix B. The Panel further concluded that the combined exposure to [FL-no: 16.134] from its use as a food flavouring substance and from its presence in toothpaste and mouthwash is also not of safety concern.

Safety assessment of the substance amines, di-C14-C20-alkyl, oxidised, from hydrogenated vegetable oil, for use in food contact materials.

The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids (CEP) assessed the safety of amines, di-C14-C18-alkyl, oxidised, renamed by the Panel as amines, di-C14-C20-alkyl, oxidised, from hydrogenated vegetable oil. The substance amines, bis(hydrogenated tallow alkyl) oxidised, consisting of the same components, but originating from tallow, is currently authorised as FCM substance No 768. The vegetable-sourced substance is intended to be used at up to 0.1% w/w as antioxidant and/or stabiliser in the manufacture of polyolefin food contact materials (FCM) and articles intended for contact with dry, aqueous and acidic foods. The substance is a mixture consisting of linear N,N-dialkyl hydroxylamines and their corresponding amine, nitrone and oxime derivatives, as well as further components: tert-N-oxides, secondary amides and carboxylic acids. Specific migration was tested from polyethylene samples in 10% ethanol and 3% acetic acid for 2 h at 100°C followed by 10 days at 60°C. None of the non-authorised components were detected to migrate at detection limits (LoD) in the range 0.003-0.029 mg/kg. The LoD of authorised carboxylic acids was 0.35 mg/kg. The Panel reassessed the genotoxicity studies carried out on FCM No 768 and evaluated two new bacterial reverse mutation tests on the nitrone and oxime derivatives as well as new (qualitative/quantitative) structure-activity relationship (Q)SAR analyses on other components. The Panel concluded that the substance did not raise a concern for genotoxicity. The Panel concluded that the substance is not of safety concern for the consumers if it is used as an additive at 0.1% w/w in the manufacture of polyolefin FCM intended to be in contact with foods simulated by food simulants A, B, C and E, except for infant formula and human milk, for storage above 6 months at room temperature and below, including hot-fill conditions and heating up to 100°C for 2 h.

Safety of soy leghemoglobin from genetically modified Komagataella phaffii as a food additive.

The EFSA Panel on Food Additive and Flavourings (FAF Panel) provides a scientific opinion on the safety of soy leghemoglobin from genetically modified Komagataella phaffii as a food additive in accordance with Regulation (EC) No 1331/2008. The proposed food additive, LegH Prep, is intended to be used as a colour in meat analogue products. The yeast Komagataella phaffii strain MXY0541 has been genetically modified to produce soy leghemoglobin; the safety of the genetic modification is under assessment by the EFSA GMO Panel (EFSA-GMO-NL-2019-162). The amount of haem iron provided by soy leghemoglobin from its proposed uses in meat analogue products is comparable to that provided by similar amounts of different types of meat. The exposure to iron from the proposed food additive, both at the mean and 95th percentile exposure, will be below the 'safe levels of intake' established by the NDA Panel for all population groups. Considering that the components of the proposed food additive will be digested to small peptide, amino acids and haem B; the recipient (non GM) strain qualifies for qualified presumption of safety status; no genotoxicity concern has been identified and no adverse effects have been identified at the highest dose tested in the available toxicological studies, the Panel concluded that there was no need to set a numerical acceptable daily intake (ADI) and that the food additive does not raise a safety concern at the proposed use in food category 12.9 and maximum use level. The Panel concluded that the use of soy leghemoglobin from genetically modified Komagataella phaffii MXY0541 as a new food additive does not raise a safety concern at the proposed use and use level. This safety evaluation of the proposed food additive remains provisional subject to the ongoing safety assessment of the genetic modification of the production strain by the GMO Panel (EFSA-GMO-NL-2019-162).

Safety assessment of the substance calcium tert-butylphosphonate for use in food contact materials.

The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids assessed the safety of calcium tert-butylphosphonate, which is intended to be used as a nucleating agent up to 0.15% w/w for the manufacture of polyolefin food contact materials (FCM) and articles for single and repeated use, in contact with all types of food, including infant formula and human milk. Specific migration was tested using polyethylene samples in 10% ethanol, 3% acetic acid and 95% ethanol for 2 h at 100°C, followed by 238 h at 40°C. Results for all three simulants were near or below the limit of detection of 10 µg/kg. As the solubility of the substance is far above the reported migration and above 60 mg/kg food, no assessment of the particle fraction was needed, and the conventional risk assessment was followed. The substance did not induce gene mutations in bacterial cells and structural chromosomal aberrations in mammalian cells, thus, did not raise concern for genotoxicity. The Panel considered that the use of the substance did not give rise to safety concern related to neurotoxicity for the general population, but this conclusion could not be applied to infants below 16 weeks of age, due to their specific sensitivity and the absence of dedicated data. The Panel concluded that calcium tert-butylphosphonate does not raise a safety concern for the consumer if it is used as a nucleating agent up to 0.15% w/w in the manufacture of polyolefin FCM that are intended to be in contact with all types of food for storage above 6 months at room temperature and below, including temperatures up to 100°C for maximum 2 h and up to 130°C for short durations. The Panel could not evaluate the safety of use to manufacture FCM for contact with infant formula and human milk.

Flavouring Group Evaluation 80, Revision 2 (FGE.80Rev2): Consideration of alicyclic, alicyclic-fused and aromatic-fused ring lactones evaluated by the JECFA (61st and 82nd meetings) structurally related to an aromatic lactone evaluated in FGE.27.

The EFSA Panel on Food Additives and Flavourings was requested to evaluate 14 flavouring substances assigned to the Flavouring Group Evaluation 80 (FGE.80), using the Procedure as outlined in the Commission Regulation (EC) No 1565/2000. Thirteen substances have already been considered in FGE.80 and its revision and in FGE.96 [FL-no: 10.005, 10.024, 10.025, 10.050, 10.061, 10.069, 10.070, 10.072, 10.169, 13.009, 13.012, 13.161 and 16.055]. The remaining flavouring substance 3a,4,5,7a-tetrahydro-3,6-dimethylbenzofuran-2(3H)-one [FL-no: 10.057] has been cleared with respect to genotoxicity in FGE.217Rev3 and it is considered in this revision 2 of FGE.80. The substance [FL-no: 10.057] was evaluated through a stepwise approach that integrates information on the structure-activity relationships, intake from current uses, threshold of toxicological concern (TTC) and available data on metabolism and toxicity. The Panel concluded that [FL-no: 10.057] does not give rise to safety concerns at its levels of dietary intake, when estimated on the basis of the 'Maximised Survey-derived Daily Intake' (MSDI) approach. Besides the safety assessment of the flavouring substance, the specifications for the material of commerce have also been considered and the information provided was complete for [FL-no: 10.057]. However, for the flavouring substance [FL-no: 10.057] in the present revision and for eight substances evaluated in previous revisions, the 'modified Theoretical Added Maximum Daily Intakes' (mTAMDIs) values are above the TTC for their structural class (III). For four substances previously evaluated in FGE.80Rev1 and in FGE.96, use levels are still needed to calculate the mTAMDI estimates. Therefore, in total for 13 flavouring substances, data on uses and use levels should be provided to finalise their safety evaluations. For [FL-no: 10.050, 10.069 and 13.161], information on the composition of stereoisomeric mixtures is needed.

Follow-up of the re-evaluation of quillaia extract (E 999) as a food additive and safety of the proposed extension of uses.

Quillaia extract (E 999) was re-evaluated in 2019 by the EFSA Panel on Food Additives and Flavourings (FAF). EFSA derived an acceptable daily intake (ADI) of 3 mg saponins/kg bw per day for E 999. Following a European Commission call for data to submit data to fill the data gaps, the present follow-up opinion assesses data provided by interested business operators (IBOs) to support an amendment of the EU specifications for E 999. Additionally, this opinion deals with the assessment of the proposed extension of use for E 999 in food supplements supplied in a solid and liquid form, excluding food supplements for infants and young children and, as a carrier in botanical nutrients. The Panel concluded that the proposed extension of use, if authorised, could result in an exceedance of the ADI at the maximum of the ranges of the mean for children, adolescents and the elderly, and for all populations at the 95th percentile. An additional proposed extension of use for E 999 to be used as a carrier for glazing agents on entire fresh fruits and vegetables has been received. Since no information on the proposed use levels of E 999 on a saponins content basis has been provided by this applicant, the Panel was not able to evaluate the safety of this extension of use. Considering the technical data submitted, the Panel recommended some modifications of the existing EU specifications for E 999, mainly to lower the limits for lead, mercury and arsenic and to include a maximum limit for cadmium and for calcium oxalate. The Panel also recommended that the limits would be expressed on a saponins basis. The Panel proposed to revise the definition of E 999 to better describe the composition in a qualitative way.

Safety assessment of the substance 'phosphorous acid, triphenyl ester, polymer with 1,4-cyclohexanedimethanol and polypropylene glycol, C10-16 alkyl esters', for use in food contact materials.

The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids (CEP) assessed the safety of the substance 'phosphorous acid, triphenyl ester, polymer with 1,4-cyclohexanedimethanol and polypropylene glycol, C10-16 alkyl esters', when used as an additive in all types of polyolefins. The substance is a polymer containing ≤ 13% w/w of a low molecular weight fraction (LMWF, < 1000 Da). A polyethylene sample with 0.15% w/w of the substance was used in a comprehensive set of migration tests with food simulants. The specific migration was up to 0.014 and 0.023 mg/kg in 4% acetic acid and 10% ethanol, respectively. Migration into olive oil was estimated by the Panel to be up to 5.3 mg/kg under worst-case conditions of use. The migrating LMWF species were comprehensively identified. Those without phosphorous were either without alerts for genotoxicity or listed in Regulation (EU) 10/2011 with worst-case migrations well below their respective specific migration limits. Toxicological studies were performed using phosphite and phosphate versions of the substance enriched in its LMWF. The substance does not raise a concern for genotoxicity. From a repeated dose 90-day oral toxicity study in rats with a 50:50 phosphite:phosphate blend, the Panel identified a NOAEL of 250 mg/kg bw per day for each component of the blend. No delayed neurotoxicity in hens was observed. The CEP Panel concluded that the substance does not raise a safety concern for the consumer if its LMWF is not higher than 13% w/w, if it is used at up to 0.15% w/w in polyolefin materials and articles intended for contact with all food types, except for infant formula and human milk, for long-term storage at room temperature and below, after hot-fill and/or heating up to 100°C for up to 2 h, and if its migration does not exceed 5 mg/kg food.

Safety assessment of mixtures of 1,9-nonanediamine (NMDA) and 2-methyl-1,8-octanediamine (MODA), for use in food contact materials.

The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids (CEP) assessed the safety of mixtures of 1,9-nonanediamine (NMDA) and 2-methyl-1,8-octanediamine (MODA) when used to produce polyamide food contact materials for contact with all food types for long-term storage at room temperature and below, including heating up to 121°C for up to 2 h. The polyamide material is also intended to be used for repeated use up to 121°C with short contact (up to 30 min). The polymer typically contains ■■■■■ of a low molecular weight fraction (LMWF, < 1000 Da). The specific migration was measured with polyamide samples in a set of migration tests with 3% acetic acid and 10% ethanol. NMDA and MODA were not detected at ■■■■■, respectively. The specific migration of the LMWF consisting of NMDA/MODA-related species was up to ■■■■■. The overall migration in olive oil was below the detection limit (3 mg/dm2). The most abundant migrating LMWF oligomers were identified. Toxicological studies were performed with NMDA, MODA and with polyamide formulations enriched in the LMWF. The results of genotoxicity assays did not raise a concern. From a repeated-dose oral 90-day toxicity study in rats, the Panel identified a no observed adverse effect level (NOAEL) of 1000 mg/kg body weight per day for the migrating LMWF. The CEP Panel concluded that NMDA/MODA mixtures do not raise a safety concern for the consumer when used as comonomer with terephthalic acid to manufacture polyamide articles intended for contact with all food types, except for infant formula and human milk, if the migration of NMDA and MODA does not exceed 0.05 mg/kg food (as a sum of the two substances) and if the migration of the LMWF consisting of NMDA/MODA-related species does not exceed 5 mg/kg food.

Re-evaluation of shellac (E 904) as a food additive and a new application on the extension of use of shellac (E 904) in dietary foods for special medical purposes.

The present opinion deals with the re-evaluation of shellac (E 904) when used as a food additive and with the new application on the extension of use of shellac (E 904) in dietary foods for special medical purposes. The Panel derived an acceptable daily intake (ADI) of 4 mg/kg body weight (bw) per day for wax-free shellac (E 904) produced by physical decolouring, based on a NOAEL of 400 mg/kg bw per day and applying an uncertainty factor of 100. The Panel concluded that the ADI of 4 mg/kg bw per day should be considered temporary for wax-free shellac (E 904) produced by chemical bleaching, while new data are generated on the identity and levels of the organochlorine impurities in E 904. This ADI is not applicable for wax-containing shellac as a food additive. For several age groups, the ADI was exceeded at the 95th percentile in the non-brand-loyal exposure assessment scenario and maximum level exposure assessment scenario. Considering the low exceedance and the fact that both the exposure estimation and the toxicological evaluation of shellac were conservative, the panel concluded that the calculated exceedance of the ADI does not indicate a safety concern. The Panel recommended to the European Commission separating specifications for E 904 depending on the manufacturing process, chemical bleaching and physical decolouring, because they result in different impurities; revising the definition of the food additive to include a description of each manufacturing process; deleting information on wax-containing shellac from the EU specifications; revising the acid value for wax-free shellac produced by chemical bleaching; lowering the maximum limit for lead; to consider introducing limits for other toxic elements potentially present in shellac; including a maximum limit for chloroform and total inorganic chloride in the EU specification for shellac produced by chemical bleaching.

Recent advances in the risk assessment of melamine and cyanuric acid in animal feed.

Melamine can be present at low levels in food and feed mostly from its legal use as a food contact material in laminates and plastics, as a trace contaminant in nitrogen supplements used in animal feeds, and as a metabolite of the pesticide cyromazine. The mechanism of toxicity of melamine involves dose-dependent formation of crystals with either endogenous uric acid or a structural analogue of melamine, cyanuric acid, in renal tubules resulting in potential acute kidney failure. Co-exposure to melamine and cyanuric acid in livestock, fish, pets and laboratory animals shows higher toxicity compared with melamine or cyanuric acid alone. Evidence for crystal formation between melamine and other structural analogs i.e. ammelide and ammeline is limited. Illegal pet food adulterations with melamine and cyanuric acid and adulteration of milk with melamine resulted in melamine-cyanuric acid crystals, kidney damage and deaths of cats and dogs and melamine-uric acid stones, hospitalisation and deaths of children in China respectively. Following these incidents, the tolerable daily intake for melamine was re-evaluated by the U.S. Food and Drug Administration, the World Health Organisation, and the Scientific Panel on Contaminants in the Food Chain of the European Food Safety Authority (EFSA). This review provides an overview of toxicology, the adulteration incidents and risk assessments for melamine and its structural analogues. Particular focus is given to the recent EFSA risk assessment addressing impacts on animal and human health of background levels of melamine and structural analogues in animal feed. Recent research and future directions are discussed.

Nutritional safety and suitability of a specific protein hydrolysate derived from a whey protein concentrate and used in an infant formula and follow-on formula manufactured from hydrolysed protein by FrieslandCampina Nederland B.V.

The European Commission asked EFSA to deliver an opinion on the nutritional safety and suitability of a specific protein hydrolysate. It is derived from a whey protein concentrate and used in an infant and follow-on formula manufactured by FrieslandCampina Nederland B.V., which submitted a dossier to the European Commission to request an amendment of Regulation (EU) 2016/127 with respect to the protein sources that may be used in the manufacture of infant and/or follow-on formula. The protein hydrolysate under evaluation is sufficiently characterised with respect to the fraction of the hydrolysed protein. In the pertinent intervention study provided, an infant formula manufactured from the protein hydrolysate with a protein content of 2.4 g/100 kcal and consumed as the sole source of nutrition by infants for 3 months led to a growth equivalent to a formula manufactured from intact cow's milk protein with a protein content of 2.1 g/100 kcal. Data on gastrointestinal tolerance of the formula did not raise any concerns. No experimental data have been provided on the nutritional safety and suitability of this protein source in follow-on formula. Given that it is consumed with complementary foods and the protein source is nutritionally safe and suitable in an infant formula that is the sole source of nutrition of infants, the Panel considers that the protein hydrolysate is also a nutritionally safe and suitable protein source for use in follow-on formula. The Panel concludes that the protein hydrolysate under evaluation is a nutritionally safe and suitable protein source for use in infant and follow-on formula, as long as the formula in which it is used contains a minimum of 2.4 g/100 kcal protein and complies with the compositional criteria of Regulation (EU) 2016/127 and the amino acid pattern in its Annex IIIA.

Flavouring Group Evaluation 217 Revision 3 (FGE.217Rev3): consideration of genotoxic potential for α,ß-unsaturated ketones and precursors from chemical subgroup 4.1 of FGE.19: lactones.

The Panel on Food Additives and Flavourings of the European Food Safety Authority was requested to evaluate the genotoxic potential of four flavouring substances [FL-no: 10.023, 10.030, 10.057 and 13.012] from subgroup 4.1 of FGE.19. For three of these substances [FL-no: 10.023, 10.030 and 13.012], the concern for genotoxicity has been ruled out in previous revisions of Flavouring Group Evaluation 217 (FGE.217). However, in FGE.217Rev2, a concern for genotoxicity could not be ruled out for 3a,4,5,7a-tetrahydro-3,6-dimethylbenzofuran-2(3H)-one [FL-no: 10.057]. After publication of FGE.217Rev2, industry provided additional genotoxicity studies for [FL-no: 10.057], which are evaluated in the present opinion FGE.217Rev3. The flavouring substance [FL-no: 10.057] did not induce gene mutations or numerical or structural chromosomal aberrations in vitro. Based on these data, the Panel concluded that the concern for genotoxicity is ruled out for [FL-no: 10.057]. Consequently, it can be evaluated through the Procedure.

Flavouring Group Evaluation 21 Revision 6 (FGE.21Rev6): thiazoles, thiophenes, thiazoline and thienyl derivatives from chemical groups 29 and 30.

The Panel on Food additives and Flavourings (FAF) was requested to evaluate the flavouring substances 2,4-dimethyl-3-thiazoline [FL-no: 15.060] and 2-isobutyl-3-thiazoline [FL-no: 15.119] in Flavouring Group Evaluation 21 revision 6 (FGE.21Rev6). FGE.21Rev6 deals with 41 flavouring substances of which 39 have been already evaluated to be of no safety concern when based on the MSDI approach. For [FL-no: 15.060 and 15.119], a concern for genotoxicity was raised in FGE.21. Genotoxicity data have been submitted for the supporting substance 4,5-dimethyl-2-isobutyl-3-thiazoline [FL-no: 15.032] evaluated in FGE.76Rev2. The concerns for gene mutations and clastogenicity are ruled out for [FL-no: 15.032] and for the structurally related substances [FL-no: 15.060 and 15.119], but not for aneugenicity. Therefore, the aneugenic potential of [FL-no: 15.060 and 15.119] should be investigated in studies with the individual substances. For [FL-no: 15.054, 15.055, 15.057, 15.079 and 15.135], (more reliable) information on uses and use levels is needed to (re)calculate the mTAMDIs in order to finalise their evaluation. Provided that information is submitted for [FL-no: 15.060 and 15.119] with respect to potential aneugenicity, that would allow evaluation of these substances through the Procedure, also for these two substances, more reliable data on uses and use levels would be required. Upon submission of such data, additional data on toxicity may become necessary for all seven substances. For [FL-no: 15.054, 15.057, 15.079 and 15.135], information on the actual percentages of stereoisomers in the material of commerce based on analytical data should be provided.

Re-evaluation of locust bean gum (E 410) as a food additive in foods for infants below 16 weeks of age and follow-up of its re-evaluation as a food additive for uses in foods for all population groups.

Locust bean gum (E 410) was re-evaluated in 2017 by the former EFSA Panel on Food Additives and Nutrient sources added to Food (ANS). As a follow-up to that assessment, the Panel on Food Additives and Flavourings (FAF) was requested to assess the safety of locust bean gum (E 410) for its uses as a food additive in food for infants below 16 weeks of age belonging to food category 13.1.5.1 (Dietary foods for infants for special medical purposes and special formulae for infants). In addition, the FAF Panel was requested to address the issues already identified during the re-evaluation of the food additive when used in food for the general population, including the safety assessment for FC 13.1.5.1 and 13.1.5.2 (Dietary foods for babies and young children for special medical purposes as defined in directive 1999/21/EC). The process involved the publication of a call for data. Based on the received data, the Panel concluded that the technical data provided by the interested business operators support an amendment of the specifications for locust bean gum (E 410) laid down in Commission Regulation (EU) No 231/2012. The Panel identified a reference point of 1,400 mg/kg bw per day based on reduced blood zinc levels in a piglet study. It applied the margin of exposure (MoE) for the safety assessment of locust bean gum (E 410) when used as a food additive in FC 13.1.5.1 and 13.1.5.2. The Panel concluded that a MoE above 1 would not raise a safety concern. A MoE above 1 was obtained for some of the scenarios and exposure levels for infants. For toddlers (consumers only of food for special medical purposes), the MoE was above 1 for all exposure levels.

Safety assessment of 'waxes, paraffinic, refined, derived from petroleum-based or synthetic hydrocarbon feedstock, low viscosity' for use in food contact materials.

The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids (CEP Panel) assessed the safety of the 'waxes, paraffinic, refined, derived from petroleum-based or synthetic hydrocarbon feedstock, low viscosity' (FCM No. 93), for which the uses were requested to be extended for articles in contact with fatty foods. Migration from low-density polyethylene samples containing 1% w/w of a representative wax was tested in food simulants. In fatty food simulants, the migration of mineral oil saturated hydrocarbons (MOSH) ≤ C35 was 142 mg/kg food, exceeding the overall migration limit for plastic FCM. Mineral oil aromatic hydrocarbons (MOAH) with at least two rings are largely removed during the manufacturing process. Based on various lines of evidence, the Panel concluded that any concern for the potential presence of MOAH with two or more conjugated aromatic rings can be ruled out. Based on the genotoxicity studies and on the content of polycyclic aromatic hydrocarbons (PAHs), the substance does not raise a concern for genotoxicity. Available toxicokinetic data showed a limited accumulation of MOSH. No adverse effects were observed up to the highest tested dose of 9 g/kg body weight per day in a 90-day repeated oral toxicity study in Sprague-Dawley rats. The available results showed that FCM No. 93 is devoid of endocrine activity. The provided information on chronic toxicity and carcinogenicity was limited and inadequate to reach conclusions on these endpoints. Therefore, the CEP Panel concluded that under the intended and tested conditions of uses, the substance does not raise safety concern for the consumer if used to a level ensuring that its migration into food is no more than 5 mg/kg.

Re-evaluation of xanthan gum (E 415) as a food additive in foods for infants below 16 weeks of age and follow-up of its re-evaluation as a food additive for uses in foods for all population groups.

Xanthan gum (E 415) was re-evaluated in 2017 by the former EFSA Panel on Food Additives and Nutrient sources added to Food. As a follow-up to that assessment, the Panel on Food Additives and Flavourings (FAF) was requested to assess the safety of xanthan gum (E 415) for its uses as a food additive in food for infants below 16 weeks of age belonging to food category (FC) 13.1.5.1 (Dietary foods for infants for special medical purposes and special formulae for infants). In addition, the FAF Panel was requested to address the issues already identified during the re-evaluation of the food additive when used in food for the general population. The process involved the publication of a call for data to allow the interested business operators to provide the requested information to complete the risk assessment. The Panel concluded that the technical data provided by the interested business operators support an amendment of the specifications for E 415 laid down in Commission Regulation (EU) No 231/2012. Due to the low validity of the available clinical studies, the Panel concluded that a reference point could not be derived from them but the results of the available studies on neonatal piglets could serve to derive a reference point. The Panel calculated the margin of exposure for infants below 16 weeks of age consuming food for special medical purposes (FC 13.1.5.1) for the highest xanthan gum exposure and concluded that there are no safety concerns for the use of xanthan gum (E 415) as a food additive in FC 13.1.5.1.