Recent Advances in Tetra- (Ti, Sn, Zr, Hf) and Pentavalent (Nb, V, Ta) Metal-Substituted Molecular Sieve Catalysis.

Metal substitution of molecular sieve systems is a major driving force in developing novel catalytic processes to meet current demands of green chemistry concepts and to achieve sustainability in the chemical industry and in other aspects of our everyday life. The advantages of metal-substituted molecular sieves include high surface areas, molecular sieving effects, confinement effects, and active site and morphology variability and stability. The present review aims to comprehensively and critically assess recent advances in the area of tetra- (Ti, Sn, Zr, Hf) and pentavalent (V, Nb, Ta) metal-substituted molecular sieves, which are mainly characterized for their Lewis acidic active sites. Metal oxide molecular sieve materials with properties similar to those of zeolites and siliceous molecular sieve systems are also discussed, in addition to relevant studies on metal-organic frameworks (MOFs) and some composite MOF systems. In particular, this review focuses on (i) synthesis aspects determining active site accessibility and local environment; (ii) advances in active site characterization and, importantly, quantification; (iii) selective redox and isomerization reaction applications; and (iv) photoelectrocatalytic applications.

Catching a New Zeolite as a Transition Material during Deconstruction.

Zeolites are key materials in both basic research and industrial applications. However, their synthesis is neither diverse nor applicable to labile frameworks because classical procedures require harsh hydrothermal conditions, whereas post-synthesis methods are limited to a few suitable parent materials. Remaining frameworks can fail due to amorphization, dissolution, and other decomposition processes. Nevertheless, stopping degradation at intermediate structures could yield new zeolites. Here, by optimizing the design and synthesis parameters of the parent zeolite IWV, we "caught" a new, highly crystalline, and siliceous zeolite during its degradation. IWV seed-assisted crystallization followed by gentle transformation into the water-alcohol system yielded the highly crystalline daughter zeolite IPC-20, whose structure was solved by precession-assisted three-dimensional electron diffraction. Without additional requirements, as in conventional (direct or post-synthesis) strategies, our approach may be applied to any chemically labile material with a staged structure.

Encapsulating Metal Nanoparticles into a Layered Zeolite Precursor with Surface Silanol Nests Enhances Sintering Resistance.

Supported metal nanoparticles are used as heterogeneous catalysts but often deactivated due to sintering at high temperatures. Confining metal species into a porous matrix reduces sintering, yet supports rarely provide additional stabilization. Here, we used the silanol-rich layered zeolite IPC-1P to stabilize ultra-small Rh nanoparticles. By adjusting the IPC-1P interlayer space through swelling, we prepared various architectures, including microporous and disordered mesoporous. In situ scanning transmission electron microscopy confirmed that Rh nanoparticles are resistant to sintering at high temperature (750 °C, 6 hrs). Rh clusters strongly bind to surface silanol quadruplets at IPC-1P layers by hydrogen transfer to clusters, while high silanol density hinders their migration based on density functional theory calculations. Ultimately, combining swelling with long-chain surfactant and utilizing metal-silanol interactions resulted in a novel, catalytically active material-Rh@IPC_C22.

Controllable Zeolite AST Crystallization: Between Classical and Reversed Crystal Growth.

Invited for the cover of this issue are Maksym Opanasenko and co-workers at Charles University in Prague, IKTS and deepXscan GmbH in Dresden. The image depicts a controllable crystallization mechanism that can be switched from classical to reversed crystal growth by manipulating the interplay between silica particles and the structure-directing agent. Read the full text of the article at 10.1002/chem.202200590.

Controllable Zeolite AST Crystallization: Between Classical and Reversed Crystal Growth.

Crystal growth mechanisms govern a wide range of properties of crystalline materials. Reversed crystal growth is one of the nonclassical mechanisms observed in many materials. However, the reversed crystallization starting from amorphous aggregates and the key factors driving this growth remain elusive. Here, we describe a characteristic model of reversed crystal growth representing the inner structure and crystallinity development of aggregates studied by microscopy and nano X-ray computed tomography. By adjusting the synthesis conditions, the fundamental function of the structure-directing agent, which determines the crystallization pathway, was revealed. As a result, the crystal growth mode can be "switched" from the classical route at a low ratio of SDA/framework elements to reversed growth at a high ratio. Our findings provide further insights into crystal growth control, which is crucial for improving synthesis protocols and designing various forms of crystalline materials.

Exfoliated Ferrierite-Related Unilamellar Nanosheets in Solution and Their Use for Preparation of Mixed Zeolite Hierarchical Structures.

Direct exfoliation of layered zeolites into solutions of monolayers has remained unresolved since the 1990s. Recently, zeolite MCM-56 with the MWW topology (layers denoted mww) has been exfoliated directly in high yield by soft-chemical treatment with tetrabutylammonium hydroxide (TBAOH). This has enabled preparation of zeolite-based hierarchical materials and intimate composites with other active species that are unimaginable via the conventional solid-state routes. The extension to other frameworks, which provides broader benefits, diversified activity, and functionality, is not routine and requires finding suitable synthesis formulations, viz. compositions and conditions, of the layered zeolites themselves. This article reports exfoliation and characterization of layers with ferrierite-related structure, denoted bifer, having rectangular lattice constants like those of the FER and CDO zeolites, and thickness of approximately 2 nm, which is twice that of the so-called fer layer. Several techniques were combined to prove the exfoliation, supported by simulations: AFM; in-plane, in situ, and powder X-ray diffraction; TEM; and SAED. The results confirmed (i) the structure and crystallinity of the layers without unequivocal differentiation between the FER and CDO topologies and (ii) uniform thickness in solution (monodispersity), ruling out significant multilayered particles and other impurities. The bifer layers are zeolitic with Brønsted acid sites, demonstrated catalytic activity in the alkylation of mesitylene with benzyl alcohol, and intralayer pores visible in TEM. The practical benefits are demonstrated by the preparation of unprecedented intimately mixed zeolite composites with the mww, with activity greater than the sum of the components despite high content of inert silica as pillars.

Synthesis and Post-Synthesis Transformation of Germanosilicate Zeolites.

Zeolites are one of the most important heterogeneous catalysts, with a high number of large-scale industrial applications. While the synthesis of new zeolites remain rather limited, introduction of germanium has substantially increased our ability to not only direct the synthesis of zeolites but also to convert them into new materials post-synthetically. The smaller Ge-O-Ge angles (vs. Si-O-Si) and lability of the Ge-O bonds in aqueous solutions account for this behaviour. This Minireview discusses critical aspects of germanosilicate synthesis and their post-synthesis transformations to porous materials.

Synthesis and Characterisation of Hierarchically Structured Titanium Silicalite-1 Zeolites with Large Intracrystalline Macropores.

The successful synthesis of hierarchically structured titanium silicalite-1 (TS-1) with large intracrystalline macropores by steam-assisted crystallisation of mesoporous silica particles is reported. The macropore topology was imaged in 3D by using electron tomography and synchrotron radiation-based ptychographic X-ray computed tomography, revealing interconnected macropores within the crystals accounting for about 30 % of the particle volume. The study of the macropore formation mechanism revealed that the mesoporous silica particles act as a sacrificial macropore template during the synthesis. Silicon-to-titanium ratio of the macroporous TS-1 samples was successfully tuned from 100 to 44. The hierarchically structured TS-1 exhibited high activity in the liquid phase epoxidation of 2-octene with hydrogen peroxide. The hierarchically structured TS-1 surpassed a conventional nano-sized TS-1 sample in terms of alkene conversion and showed comparable selectivity to the epoxide. The flexible synthesis route described here can be used to prepare hierarchical zeolites with improved mass transport properties for other selective oxidation reactions.

Syntheses, Crystal Structures, and Spectroscopic Studies of Uranyl Oxide Hydrate Phases with La(III)/Nd(III) Ions.

We have synthesized two uranyl oxide hydrate (UOH) phases incorporating La(III) or Nd(III) ions under hydrothermal conditions. Investigations with scanning electron microscopy and transmission electron microscopy (TEM) revealed thin-plate morphologies with a U-to-Ln atomic ratio of 2:1 (Ln = La or Nd), while single-crystal X-ray diffraction and TEM electron diffraction studies confirmed that both UOH phases crystallized in the trigonal P31m space group with uranyl oxide layered structures incorporating La(III)/Nd(III) ions as interlayer species. Vibrational spectroscopic studies revealed typical vibrational modes for U ions, with the derived U═O bond lengths being comparable to the values reported on other UOH phases. Bond-valence-sum calculations suggest hexavalent uranium in the uranyl form, which was confirmed by the results of diffuse-reflectance and X-ray absorption near-edge structure spectroscopies. This work reports the first single-crystal structural investigation of UOH phases with Ln ions, which has significant implications in the weathering products of uraninite mineral in nature as well as the alteration products of spent nuclear fuels during interim storage and safe disposal over geological timespans.

Fluorescent Sulphur- and Nitrogen-Containing Porous Polymers with Tuneable Donor-Acceptor Domains for Light-Driven Hydrogen Evolution.

Light-driven water splitting is a potential source of abundant, clean energy, yet efficient charge-separation and size and position of the bandgap in heterogeneous photocatalysts are challenging to predict and design. Synthetic attempts to tune the bandgap of polymer photocatalysts classically rely on variations of the sizes of their π-conjugated domains. However, only donor-acceptor dyads hold the key to prevent undesired electron-hole recombination within the catalyst via efficient charge separation. Building on our previous success in incorporating electron-donating, sulphur-containing linkers and electron-withdrawing, triazine (C3 N3 ) units into porous polymers, we report the synthesis of six visible-light-active, triazine-based polymers with a high heteroatom-content of S and N that photocatalytically generate H2 from water: up to 915 µmol h-1 g-1 with Pt co-catalyst, and-as one of the highest to-date reported values -200 µmol h-1 g-1 without. The highly modular Sonogashira-Hagihara cross-coupling reaction we employ, enables a systematic study of mixed (S, N, C) and (N, C)-only polymer systems. Our results highlight that photocatalytic water-splitting does not only require an ideal optical bandgap of ≈2.2 eV, but that the choice of donor-acceptor motifs profoundly impacts charge-transfer and catalytic activity.

Microporous Lead-Organic Framework for Selective CO2 Adsorption and Heterogeneous Catalysis.

A novel microporous metal-organic framework, {[Pb4(µ8-MTB)2(H2O)4]·5DMF·H2O}n (1; MTB = methanetetrabenzoate and DMF = N,N'-dimethylformamide), was successfully synthesized by a solvothermal reaction and structurally characterized by single-crystal X-ray diffraction. The framework exhibits a unique tetranuclear [Pb4(µ3-COO)(µ2-COO)6(COO)(H2O)4] secondary building unit (SBU). The combination of the SBU with the tetrahedral symmetry of MTB results in a three-dimensional network structure, with one-dimensional jarlike cavities having sizes of about 14.98 × 7.88 and 14.98 × 13.17 Å2 and propagating along the c axis. Due to the presence of four coordinately unsaturated sites per one metal cluster, an activated form of compound 1 (i.e., desolvated form denoted as 1') was tested in gas adsorption and catalytic experiments. The studies of gas sorption revealed that 1' exhibits a surface area (Brunauer-Emmett-Teller) of 980 m2·g-1. This value is the highest reported for any compound from the MTB group. Interactions of carbon dioxide (CO2) molecules with the framework, confirmed by density functional theory calculations, resulted in high CO2 uptake and significant selectivity of CO2 adsorption with respect to methane (CH4) and dinitrogen (N2) when measured from atmospheric pressure to 21 bar. The high selectivity of CO2 over N2 is mostly important for capturing CO2 from the atmosphere in attempts to decrease the greenhouse effect. Moreover, compound 1' was tested as a heterogeneous catalyst in Knoevenagel condensation of active methylene compounds with aldehydes. Excellent catalytic conversion and selectivity in the condensation of benzaldehyde and cyclohexanecarbaldehyde with malononitrile was observed, which suggests that accessible lead(II) sites play an important role in the heterogeneous catalytic process.

Tailored Band Gaps in Sulfur- and Nitrogen-Containing Porous Donor-Acceptor Polymers.

Donor-acceptor dyads hold the key to tuning of electrochemical properties and enhanced mobility of charge carriers, yet their incorporation into a heterogeneous polymer network proves difficulty owing to the fundamentally different chemistry of the donor and acceptor subunits. A family of sulfur- and nitrogen-containing porous polymers (SNPs) are obtained via Sonogashira-Hagihara cross-coupling and combine electron-withdrawing triazine (C3 N3 ) and electron-donating, sulfur-containing linkers. Choice of building blocks and synthetic conditions determines the optical band gap (from 1.67 to 2.58 eV) and nanoscale ordering of these microporous materials with BET surface areas of up to 545 m2 g-1 and CO2 capacities up to 1.56 mmol g-1 . Our results highlight the advantages of the modular design of SNPs, and one of the highest photocatalytic hydrogen evolution rates for a cross-linked polymer without Pt co-catalyst is attained (194 µmol h-1 g-1 ).

Adsorption and Diffusion of C1 to C4 Alkanes in Dual-Porosity Zeolites by Molecular Simulations.

We employ grand canonical Monte Carlo and molecular dynamics simulations to systematically study the adsorption and diffusion of C1 to C4 alkanes in hierarchical ZSM-5 zeolite with micropores (∼1 nm) and mesopores (>2 nm). The zeolite is characterized by a large surface area of active sites on the microporous scale with high permeability and access to the active sites, which arises from the enhanced transport at the mesoporous scale. We model this zeolite as a microporous Na+-exchanged alumino-sillicate zeolite ZSM-5/35 (Si/Al = 35) in which cylindrical mesopores with a diameter of 4 nm have been built by deleting atoms accordingly. We use the TraPPE and Vujic-Lyubartsev force fields along with the Lorentz-Berthelot combining rules to describe adsorbate-adsorbate and adsorbate-adsorbent interactions. The performance of the force fields is assessed by comparing against experimental single-component adsorption isotherms of methane and ethane in microporous ZSM-5/35, which we measured as part of this work. We compare the adsorption isotherms and diffusivities of the adsorbed alkanes in the dual-porosity zeolite with those in microporous ZSM-5/35 and discern the specific behavior at each porosity scale on the overall adsorption, self-diffusion, and transport behavior in zeolites with dual micro/mesoporosities.

Expansion of the ADOR Strategy for the Synthesis of Zeolites: The Synthesis of IPC-12 from Zeolite UOV.

The assembly-disassembly-organization-reassembly (ADOR) process has been used to disassemble a parent zeolite with the UOV structure type and then reassemble the resulting layers into a novel structure, IPC-12. The structure of the material has previously been predicted computationally and confirmed in our experiments using X-ray diffraction and atomic resolution STEM-HAADF electron microscopy. This is the first successful application of the ADOR process to a material with porous layers.

The effect of the zeolite pore size on the Lewis acid strength of extra-framework cations.

The catalytic activity and the adsorption properties of zeolites depend on their topology and composition. For a better understanding of the structure-activity relationship it is advantageous to focus just on one of these parameters. Zeolites synthesized recently by the ADOR protocol offer a new possibility to investigate the effect of the channel diameter on the adsorption and catalytic properties of zeolites: UTL, OKO, and PCR zeolites consist of the same dense 2D layers (IPC-1P) that are connected with different linkers (D4R, S4R, O-atom, respectively) resulting in the channel systems of different sizes (14R × 12R, 12R × 10R, 10R × 8R, respectively). Consequently, extra-framework cation sites compensating charge of framework Al located in these dense 2D layers (channel-wall sites) are the same in all three zeolites. Therefore, the effect of the zeolite channel size on the Lewis properties of the cationic sites can be investigated independent of other factors determining the quality of Lewis sites. UTL, OKO, and PCR and pillared 2D IPC-1PI materials were prepared in Li-form and their properties were studied by a combination of experimental and theoretical methods. Qualitatively different conclusions are drawn for Li(+) located at the channel-wall sites and at the intersection sites (Li(+) located at the intersection of two zeolite channels): the Lewis acid strength of Li(+) at intersection sites is larger than that at channel-wall sites. The Lewis acid strength of Li(+) at channel-wall sites increases with decreasing channel size. When intersecting channels are small (10R × 8R in PCR) the intersection Li(+) sites are no longer stable and Li(+) is preferentially located at the channel-wall sites. Last but not least, the increase in adsorption heats with the decreasing channel size (due to enlarged dispersion contribution) is clearly demonstrated.

The ADOR mechanism for the synthesis of new zeolites.

A novel methodology, called ADOR (assembly-disassembly-organisation-reassembly), for the synthesis of zeolites is reviewed here in detail. The ADOR mechanism stems from the fact that certain chemical weakness against a stimulus may be present in a zeolite framework, which can then be utilized for the preparation of new solids through successive manipulation of the material. In this review, we discuss the critical factors of germanosilicate zeolites required for application of the ADOR protocol and describe the mechanism of hydrolysis, organisation and condensation to form new zeolites starting from zeolite UTL. Last but not least, we discuss the potential of this methodology to form other zeolites and the prospects for future investigations.

Ru complexes of Hoveyda-Grubbs type immobilized on lamellar zeolites: activity in olefin metathesis reactions.

Hoveyda-Grubbs type catalysts with cationic tags on NHC ligands were linker-free immobilized on the surface of lamellar zeolitic supports (MCM-22, MCM-56, MCM-36) and on mesoporous molecular sieves SBA-15. The activity of prepared hybrid catalysts was tested in olefin metathesis reactions: the activity in ring-closing metathesis of citronellene and N,N-diallyltrifluoroacetamide decreased in the order of support MCM-22 ≈ MCM-56 > SBA-15 > MCM-36; the hybrid catalyst based on SBA-15 was found the most active in self-metathesis of methyl oleate. All catalysts were reusable and exhibited low Ru leaching (<1% of Ru content). XPS analysis revealed that during immobilization ion exchange between Hoveyda-Grubbs type catalyst and zeolitic support occurred in the case of Cl(-) counter anion; in contrast, PF6 (-) counter anion underwent partial decomposition.

Hierarchical hybrid organic-inorganic materials with tunable textural properties obtained using zeolitic-layered precursor.

Novel layered zeolitic organic-inorganic materials have been synthesized using a two-dimensional zeolite precursor IPC-1P prepared by a top-down approach from zeolite UTL. The formation of porous materials containing organic linkers or polyhedral oligomeric siloxane covalently bonded to zeolite layers in the interlayer space was confirmed by a variety of characterization techniques (N2/Ar sorption analysis, XRD, (29)Si and (13)C NMR, TEM). The organic-inorganic porous hybrids obtained by intercalation with silsesquioxane posessed layered morphology and contained large crystalline domains. The hybrids exhibited mesoporous or hierarchical micro-/mesoporous systems, stable up to 350 °C. Textural properties of the formed zeolitic organic-inorganic materials can be controlled by varying the linker or synthetic conditions over a broad range. Surface areas and pore volumes of synthesized hybrids significantly exceed those for parent zeolite UTL and corresponding swollen material; the amount of micropores increased with increasing rigidity and size of the organic linker in the order biphenyl > phenylene > ethanediyl.

Atomic force microscopy of novel zeolitic materials prepared by top-down synthesis and ADOR mechanism.

Top-down synthesis of 2D materials from a parent 3D zeolite with subsequent post-synthetic modification is an interesting method for synthesis of new materials. Assembly, disassembly, organisation, reassembly (ADOR) processes towards novel materials based on the zeolite UTL are now established. Herein, we present the first study of these materials by atomic force microscopy (AFM). AFM was used to monitor the ADOR process through observation of the changes in crystal surface and step height of the products. UTL surfaces were generally complex and contained grain boundaries and low-angle intergrowths, in addition to regular terraces. Hydrolysis of UTL to IPC-1P did not have adverse effects on the surfaces as compared to UTL. The layers remained intact after intercalation and calcination forming novel materials IPC-2 and IPC-4. Measured step heights gave good correlation with the X-ray diffraction determined d200 -spacing in these materials. However, swelling gave rise to significant changes to the surface topography, with significantly less regular terrace shapes. The pillared material yielded the roughest surface with ill-defined surface features. The results support a mechanism for the majority of these materials in which the UTL layers remain intact during the ADOR process as opposed to dissolving and recrystallising during each step.

From double-four-ring germanosilicates to new zeolites: in silico investigation.

To date, the majority of zeolites have been prepared by the solvothermal route using organic structure directing agents. Two new zeolites with structural codes PCR and OKO were recently prepared from UTL germanosilicate by removal of the double-four ring (D4R) connecting the dense two-dimensional layers [Nature Chem. 2013, 5, 628]. The corresponding experimental protocol, Assembly-Disassembly-Organization-Reassembly (ADOR), is explored in this contribution with an in silico investigation. The structure and properties of hypothetical zeolites that could be obtained from zeolites with IWW, IWV, IWR, ITR, and ITH topologies using the ADOR protocol are reported based on a computational investigation. A total of 20 new structures are presented together with their characteristics.