A novel anatomical ceramic root canal simulator for endodontic training.

INTRODUCTION: Endodontic therapy is often complicated and technically demanding. The aim of this study was to develop a reproducible biomimetic root canal model for pre-clinical and postgraduate endodontic training. MATERIAL AND METHODS: A specific ceramic shaping technique (3D printing and slip casting of a root canal mould) was developed to reproduce canal systems with the desired shape and complexity using a microporous hydroxyapatite (HAp)-based matrix. The microstructural morphology, pore size and porosity, as well as the Vickers microhardness of the ceramic simulators (CS) were assessed and were compared with natural dentin and commercial resin blocks. The reproducibility of the root canal shapes was assessed using the Dice-Sørensen similarity index. Endodontic treatments, from refitting the access cavity to obturation, were performed on the CS. Each step was controlled by radiography. RESULTS: Many properties of the CS were similar to those of natural dental roots, including the mineral component (HAp), porosity (20%, porous CS), pore size (3.4 ± 2.6 µm) and hardness (120.3 ± 18.4 HV). DISCUSSION: We showed that it is possible to reproduce the radio-opacity of a tooth and variations in root canal morphology. The endodontic treatments confirmed that the CS provided good tactile sensation during instrumentation and displayed suitable radiological behaviour. CONCLUSIONS: This novel anatomic root canal simulator is well suited for training undergraduate and postgraduate students in endodontic procedures.

[Bioinformatic analysis of CCND2 expression in papillary thyroid carcinoma and its impact on immune infiltration].

OBJECTIVE: To investigate cyclin D2 (CCND2) expression in papillary thyroid carcinoma (PTC) and its association with the clinicopathological features. METHODS: The public databases TCGA, TIMER 2.0 and UALCAN were used to explore CCND2 expression level in PTC and adjacent tissues, and its diagnostic value for PTC was analyzed using ROC curves. GO enrichment analysis of CCND2-related differentially expressed genes (DEGs) in PTC was performed, and tumor immune infiltration of CCND2 in thyroid cancer was analyzed using TIMER database and CIBERSORT data source. RT-qPCR and Western blot were used to detect CCND2 expression in normal human thyroid cell line Nthy-ori-3-1 and human PTC cell lines TPC-1 and BCPAP. CCND2 expression was also detected in clinical specimens of PTC and adjacent tissues by immunohistochemistry, and its correlation with clinicopathological features of the patients were analyzed. RESULTS: Informatic analysis revealed significantly higher CCND2 mRNA expression in thyroid cancer than in the adjacent tissues (P < 0.001) in close correlation with tumor stage, gender, age, pathological subtype, and lymph node involvement (P < 0.05). ROC curve analysis showed that at the cutoff value of 4.983, the diagnostic sensitivity, specificity, and accuracy of CCND2 expression for PTC was 83.6%, 94.9%, and 78.5%, respectively. CCND2 expression was positively correlated with B cells, CD4+ T cells, and macrophages (P < 0.001) and negatively with CD8+ T cells (P < 0.01), and also correlated with memory B-cell infiltration, CD4+ T-cell memory activation, M2 macrophages, resting mast cells, and mast cell activation (P < 0.05). RT-qPCR, Western blot and immunohistochemistry showed significantly higher CCND2 expression in the PTC cells than in Nthy-ori-3-1 cells (P < 0.01) and also in clinical PTC tissues than in the adjacent tissues (P < 0.05) in correlation with tumor size, lymph node metastasis and TNM stage (P < 0.05). CONCLUSION: CCND2 overexpression is closely correlated with tumor progression and immune cell infiltration in PTC patients..

[Non-muscle myosin heavy chain 9 gene-related disorders with thrombocytopenia: report of two pedigrees and literature review].

Objective: To summarize the clinical characteristics and gene variants of 2 pedigrees of non-muscle myosin heavy chain 9 related diseases (MYH9-RD) in children. Methods: The basic information, clinical features, gene variants and laboratory tests of MYH9-RD patients from 2 pedigrees confirmed in the First Affiliated Hospital of Zhengzhou University in November 2021 and July 2022 were analyzed retrospectively. "Non-muscle myosin heavy chain 9 related disease" "MYH9" and "children" were used as key words to search at Pubmed database, CNKI and Wanfang database up to February 2023. The MYH9-RD gene variant spectrum and clinical data were analyzed and summarized. Results: Proband 1 (male, 11 years old) sought medical attention due to epistaxis, the eldest sister and second sister of proband 1 only showed excessive menstrual bleeding, the skin and mucous membrane of the their mother were prone to ecchymosis after bumping, the uncle of proband 1 had kidney damage, and the maternal grandmother and maternal great-grandmother of proband 1 had a history of cataracts. There were 7 cases of phenotypic abnormalities in this pedigree. High-throughput sequencing showed that the proband 1 MYH9 gene had c.279C>G (p.N93K) missense variant, and family verification analysis showed that the variant was inherited from the mother. A total of 4 patients including proband 1 and family members were diagnosed with MYH9-RD. The proband 2 (female, 1 year old) sought medical attention duo to fever and cough, and the father's physical examination revealed thrombocytopenia. There were 2 cases of phenotypic abnormalities in this pedigree. High-throughput sequencing showed that there was a c.4270G>A (p.D1424N) missense variant in the proband 2 MYH9 gene, and family verification analysis showed that the variant was inherited from the father. A total of 2 patients including proband 2 and his father were diagnosed with MYH9-RD. A total of 99 articles were retrieved, including 32 domestic literatures and 67 foreign literatures. The MYH9-RD cases totaled 149 pedigrees and 197 sporadic patients, including 2 pedigrees in our study. There were 101 cases with complete clinical data, including 62 sporadic cases and 39 pedigrees. There were 56 males and 45 females, with an average age of 6.9 years old. The main clinical manifestations were thrombocytopenia, skin ecchymosis, and epistaxis. Most patients didn't receive special treatment after diagnosis. Six English literatures related to MYH9-RD caused by c.279C>G mutation in MYH9 gene were retrieved. Italy reported the highest number of cases (3 cases). Twelve literatures related to MYH9-RD caused by c.4270G>A mutation in MYH9 gene were retrieved. China reported the highest number of cases (9 cases). Conclusions: The clinical manifestations of patients in the MYH9-RD pedigrees varied greatly. MYH9 gene c.279C>G and c.4270G>A mutations are the cause of MYH9-RD.

Bilateral double site (calvarial and mandibular) critical-size bone defect model in rabbits for evaluation of a craniofacial tissue engineering constructs.

Most existing preclinical models for evaluating the biosafety and bone-regeneration efficacy of innovative bone substitute materials (BSMs) or tissue engineering (TE) constructs only consisted of a single-site defect and the anatomical locations of defect varied drastically. While the compelling evidence showed that the bone healing pattern is location-dependent, owing to developmental, structural, and functional differences of anatomical locations, this is particularly true for the craniofacial region. Taking this into account, the bone healing efficiency of a BSM shown at one anatomical defect location cannot ensure the same impact at another. This prompted us to develop, for the first time, a model of bilateral critical-sized defect (CSD) at two distinctly different locations (non-load-bearing parietal calvaria and load-bearing mandibular body) co-existing in one rabbit to reduce the number of animals needed and avoid the influence of interindividual variability and evaluation bias on comparisons. 24 healthy adult male New Zealand White rabbits were randomly assigned to a group, either control, autograft (considered the "gold standard") or a clinically relevant BSM (biphasic calcium phosphate granules) (BCPg, Mastergraft®, Medronics). The full-thickness cylindrical calvarial defect (ø10 mm) on frontoparietal region and mandibular composite defect (ø11 mm) on the body of the mandible were created bilaterally using low-speed drilling with saline irrigation. The defect on one side was filled with autograft debris or BCPg, and the other side was no graft (empty). Following the euthanasia of animals at the predetermined intervals (4w and 12w), the defect zones were examined macroscopically and then sampled and processed for microcomputed tomography (microCT) and histological analysis. All surgeries went uneventfully, and all rabbits recovered slowly but steadily. No symptoms of infection or inflammation associated with the defect were observed during the experiment. At 4w and 12w, macroscopic views of all defect sites were clean without any signs of necrosis or abscess, and no intraoral communication was found. The analysis of microCT and histological findings showed the non-healing nature of the empty defect, thereby both calvaria and mandible CSDs can be validated. The study of the application of BCPg in this defect model highlighted good osteointegration and excellent osteoconductive properties but compromised the osteoinductive properties of this material (compared with autograft). To conclude, this novel double-site CSD model holds great promise in the application for preclinical evaluation of BSMs, TE construct, etc. With a reduced number of animals in use, and lower interindividual variability and evaluation bias for comparisons.

[Bone substitutes: Classification and concerns]. / Les biomatériaux de substitution osseuse : classification et intérêt.

Autograft is considered as the "gold standard" for bone reconstruction. It provides osteoinductive factors, osteogenic cells, and appropriate osteoconductive scaffold. Donor site morbidity is the main limitation of autograft. Donor disease transmission limits the use of allograft. Synthetic bone substitutes still lack osteoinductive or osteogenic properties. Composite bone substitutes combining synthetic scaffold and biochemical substances initiating proliferation and cell differentiation, and possibly osteogenesis. Bone substitutes and grafts intended for clinical use are listed.

[Engineering a bone free flap for maxillofacial reconstruction: technical restrictions]. / Ingénierie d'un lambeau osseux vascularisé à destinée maxillofaciale : les limites techniques.

Vascularisation is a key for success in bone tissue engineering. Creating a functional vascular network is an important concern so as to ensure vitality in regenerated tissues. Many strategies were developed to achieve this goal. One of these is cellular growth technique by perfusion bioreactor chamber. These new technical requirements came along with improved media and chamber receptacles: bioreactors (chapter 2). Some bone tissue engineering processes already have clinical applications but for volumes limited by the lack of vascularisation. Resorbable or non-resorbable membranes are an example. They are used separately or in association with bone grafts and they protect the graft during the revascularization process. Potentiated osseous regeneration uses molecular or cellular adjuvants (BMPs and autologous stem cells) to improve osseous healing. Significant improvements were made: integration of specific sequences, which may guide and enhance cells differentiation in scaffold; nano- or micro-patterned cell containing scaffolds. Finally, some authors consider the patient body as an ideal bioreactor to induce vascularisation in large volumes of grafted tissues. "Endocultivation", i.e., cellular culture inside the human body was proven to be feasible and safe. The properties of regenerated bone in the long run remain to be assessed. The objective to reach remains the engineering of an "in vitro" osseous free flap without morbidity.

[Oro-maxillofacial bone tissue engineering combining biomaterials, stem cells, and gene therapy]. / Ingénierie du tissu osseux oro-maxillofacial par combinaison de biomatériaux, cellules souches, thérapie génique.

Improvements have been made in regenerative medicine, due to the development of tissue engineering and cellular therapy. Bone regeneration is an ambitious project, leading to many applications involving skull, maxillofacial, and orthopaedic surgery. Scaffolds, stem cells, and signals support bone tissue engineering. The scaffold physical and chemical properties promote cell invasion, guide their differentiation, and enable signal transmission. Scaffold may be inorganic or organic. Their conception was improved by the use of new techniques: self-assembled nanofibres, electrospinning, solution-phase separation, micropatterned hydrogels, bioprinting, and rapid prototyping. Cellular biology processes allow us to choose between embryonic stem cells or adult stem cells for regenerative medicine. Finally, communication between cells and their environment is essential; they use various signals to do so. The study of signals and their transmission led to the discovery and the use of Bone Morphogenetic Protein (BMP). The development of cellular therapy led to the emergence of a specific field: gene therapy. It relies on viral vectors, which include: retroviruses, adenoviruses and adeno-associated vectors (AAV). Non-viral vectors include plasmids and lipoplex. Some BMP genes have successfully been transfected. The ability to control transfected cells and the capacity to combine and transfect many genes involved in osseous healing will improve gene therapy.

Designed sponges based on chitosan and cyclodextrin polymer for a local release of ciprofloxacin in diabetic foot infections.

Diabetic foot infections are the most common complications requiring hospitalisation of patients with diabetes. They often result in amputation to extremities and are associated with high morbi-mortality rates, especially when bone is infected. Treatment of these complications is based on surgical procedures, nursing care and systemic antibiotic therapy for several weeks, with a significant risk of relapse. Due to low blood flow and damage caused by diabetic foot infection, blood supply is decreased, causing low antibiotic diffusion in the infected site and an increase of possible bacterial resistance, making this type of infection particularly difficult to treat. In this context, the aim of this work was to develop a medical device for local antibiotic release. The device is a lyophilized physical hydrogel, i.e a sponge based on two oppositely charged polyelectrolytes (chitosan and poly(cyclodextrin citrate)). Cyclodextrins, via inclusion complexes, increase drug bioavailability and allow an extended release. Using local release administration increases concentrations in the wound without risk of toxicity to the body and prevents the emergence of resistant bacteria. The hydrogel was characterised by rheology. After freeze-drying, a curing process was implemented. The swelling rate and cell viability were evaluated, and finally, the sponge was impregnated with a ciprofloxacin solution to evaluate its drug release profile and its antibacterial activity.

[The analysis of mutations in non-syndromic deafness gene SLC26A4 by next generation sequencing technology].

Objective:To analogize the distribution of nonsyndromic deafness gene SLC26A4 mutation and to characterize clinical profiles in patients with SLC26A4 mutation in order to understand their hereditary etiologies and provide evidence for deafness screening and accurate genetic counseling. Method: SLC26A4 gene was first analized by MALDI-TOF-MS technology to detect the hot mutation c.919-2A>G in 57 cases. There were 3 cases with homozygous mutation and 7cases with heterozygous mutation. Then 54 cases except for 3 cases with homozygous mutation were analyzed by targeted genomic capturing and next generation sequencing technologies(targeted DNA-Hiseq), 81 non-syndromic deafness genes and the chondiogene was designed to all their exons and their flanking intron(±10 bp) sequences. Sanger sequencing was used to confirm the variant by analyzing the DNAs sequences. Result: The carrying rates of SLC26A4 gene in the deafness were 26.32%, but SLC26A4 homozygous genes and compound heterozygous genes were 19.30%. They included 3 cases with c.919-2A>G and 1 case with c.754T>C pathogenic homozygous mutations. While in 7 cases with compound heterozygous there were 6 cases with two pathogenic mutation, there was 1 case with c.2168A>G pathogenic mutation the other likely pathogenic mutation c.1545-1546insC. The 11 cases all were diagnosed large vestibular aqueduct syndrome(LVAS). There were 4 cases with heterozygous that were not found large vestibular aqueduct. Conclusion: Pathogenic mutation of SLC26A4 is closely related to clinical phenotype of LVAS. The hot pathogenic mutation was c.919-2A>G of SLC26A4 gene. The next generation sequencing technology is available for the diagnosis of inherited hearing loss especially for LVAS.

Numerical optimization of cell colonization modelling inside scaffold for perfusion bioreactor: A multiscale model.

Part of clinically applicable bone graft substitutes are developed by using mechanical stimulation of flow-perfusion into cell-seeded scaffolds. The role of fluid flow is crucial in driving the nutrient to seeded cells and in stimulating cell colonization. A common numerical approach is to use a multiscale model to link some physical quantities (wall shear stress and inlet flow rate) that act at different scales. In this study, a multiscale model is developed in order to determine the optimal inlet flow rate to cultivate osteoblast-like cells seeded in a controlled macroporous biomaterial inside a perfusion bioreactor system. We focus particularly on the influence of Wall Shear Stress on cell colonization to predict cell colonization at the macroscale. Results obtained at the microscale are interpolated at the macroscale to determine the optimal flow rate. For a macroporous scaffold made of interconnected pores with pore diameters of above 350 µm and interconnection diameters of 150 µm, the model predicts a cell colonization of 325% after a 7-day-cell culture with a constant inlet flow rate of 0.69 mL·min-1. Furthermore, the strength of this protocol is the possibility to adapt it to most porous biomaterials and dynamic cell culture systems.

Antibacterial activation of hydroxyapatite (HA) with controlled porosity by different antibiotics.

In order to prevent the increasing frequency of per-operative infections, bioceramics can be loaded with anti-bacterial agents, which will release with respect to their chemical characteristics. A novel hydroxyapatite (HA) was elaborated with specific internal porosities for using as a bone-bioactive antibiotic (ATB) carrier material. UV spectrophotometry and bacteria inhibition tests were performed for testing the ATB adsorption and the microbiological effectiveness after loading with different antibiotics. The impregnation time, ATB impregnating concentration, impregnation condition and other factors, which might influence the ATB loading effect, were studied by exposure to different releasing solvents and different pathogenic bacteria: Staphylococcus aureus, Staphylococcus epidermidis and Escherichia coli. It clearly showed that the facility of ATB loading on this porous HA is even possible just under simple non-vacuum impregnation conditions in a not-so-long impregnating interval. The results also showed that, for all three types of ATB (vancomycin, ciprofloxacin and gentamicin), adsorbed amount on the micro-porous HA were hugely higher than that on dense HA. The micro-porosity of test HA had also significantly prolonged the release time of antibiotics even under mimic physiological conditions. Furthermore, it also has primarily proved by a pilot test that the antibacterial efficiency of crude micro-porous HA could be further significantly improved by other methods of functionalization such as cold plasma technique.

Biological and physico-chemical assessment of hydroxyapatite (HA) with different porosity.

HA with specific internal porosities was loaded with different antibiotics (ATBs) and then tested on its microbiological effectiveness. The HA purity was controlled with X-ray diffraction, IR and Raman spectrometry. Varying the sintering temperature and/or adding graphite and PMMA as porogenous agents lead to obtained micro- and meso-porosities. The biological tests concerned cell viability, proliferation and morphology (SEM), and the cytochemical staining of actin and vinculin. The micro- and meso-porous HA samples had an internal pore size of 1-10 microm and 10-50 microm, respectively. X-ray diffraction and FTIR confirmed the high purity of the HA. The cell viability tests with L132 cells confirmed the excellent cytocompatibility of HA, the graphite powder and the ATB vancomycine. Proliferation rate was assessed with MC3T3-E1 osteoblasts. All HA samples produced a higher proliferation than the controls; the micro-porous HA inducing the highest cell growth. The ATB impregnated HA also stimulated cell proliferation but in lower extend. Cytochemical staining of osteoblasts revealed a well-developed cytoskeleton with strong stress fibres. Labelling of the focal adhesion contacts with anti-vinculin showed a less developed adhesion process in the cells on the different HA substrates. It was possible to realize a highly pure hydroxyapatite with different but controlled porosities by varying the sintering temperature and/or addition of a porogenous agents. This purity and the micro-porosity stimulate significantly cell growth.

[An analysis of the mutation in GJB2，GJB3，SLC26A4 and mtDNA12SrRNA in new born].

Objective:To analyze deafness gene mutation in GJB2，GJB3，SLC26A4 and mtDNA12SrRNA in newborn and to explore the significance of genetic test and potential correlations between the genotype and clinical phenotype.Method:Blood samples were collected with a standard protocol and DNA templates are extracted from 501 newborn in Longgang of Shenzhen.MALDI-TOF-MS Technology was used to detect the coding region twenty mutations sites of GJB2，GJB3，SLC26A4 AND mtDNA12SrRNA，includingSLC26A4(1226G>A,1229C>T,281C>T,589G>A,IVS7-2A>T,1174A>T,IVS15+5G>A,1975G>C,2027T>A,2162C>T,2168A>G),GJB2(176-191del16,35delG,167delT,235 delC,299-300 delAT),GJB3(547G>A,538C>T),mtDNA12SrRNA(1555A>G,1494C>T).While two-step hearing screening was carried by using AABR（automatedauditory brainstem response）and DPOAE. Result:In the 501 newborns,26 cases were found have one or two allele mutations of deafness-susceptibility genes.GJB2 gene mutation(n=9,1.796%) all were 235 delC single heterozygosity mutation.GJB3 gene mutation(n=3,0.599%). SLC26A4 gene mutation(n=12,2.395%) included IVS7-2A>G heterozygosity mutation(n=5). MtDNA 12Rrna gene mutation was found in 3 child(n=3,0.599%). Finally one of 26 infants was diagnosed enlarged vestibular aqueduct syndrome. The infant was detected 2168A>G heterozygosity mutation. Conclusion:235delC is the main mutation form of GJB2 gene,while it is the hottest mutation in People. But SLC26A4 gene mutations are the main type in newborn. MtDNA 12Rrna gene mutation was found in 3 child.This genetic epidemiological study demonstrated that genetic screening is helpful for determining high risk individuals and early discovering possible late-onset hearing loss. Moreover pationts and family member can acquire more effective genetic counseling.

Cyclodextrin modified PLLA parietal reinforcement implant with prolonged antibacterial activity.

The use of textile meshes in hernia repair is widespread in visceral surgery. Though, mesh infection is a complication that may prolong the patient recovery period and consequently presents an impact on public health economy. Such concern can be avoided thanks to a local and extended antibiotic release on the operative site. In recent developments, poly-l-lactic acid (PLLA) has been used in complement of polyethyleneterephthalate (Dacron®) (PET) or polypropylene (PP) yarns in the manufacture of semi-resorbable parietal implants. The goal of the present study consisted in assigning drug reservoir properties and prolonged antibacterial effect to a 100% PLLA knit through its functionalization with a cyclodextrin polymer (polyCD) and activation with ciprofloxacin. The study focused i) on the control of degree of polyCD functionalization of the PLLA support and on its physical and biological characterization by Scanning Electron Microscopy (SEM), Differential Scanning Calorimetry (DSC) and cell viability, ii) on the understanding of drug/meshes interaction using mathematic model and iii) on the correlation between drug release studies in phosphate buffer saline (PBS) and microbiological evaluation of meshes and release medium against E. coli and S. aureus. All above mentioned tests highlighted the contribution of polyCD on the improved performances of the resulting antibacterial implantable material. STATEMENT OF SIGNIFICANCE: 1. We managed for the first time, with well-defined parameters in terms of temperature and time of treatment, to functionalize a bio-absorbable synthetic material to improve drug sorption and drug release properties without affecting its mechanical properties. 2. We analyzed for the first time the degradation of our coating products by mass spectroscopy to show that only citrate and cyclodextrin residues (and glucose units) without any cytotoxicity are formed. 3. We managed to improve the mechanical properties of the PLA with the cyclodextrin polymer to form a composite. The assembly (cyclodextrin polymer and PLLA) remains biodegradable.

Laparoscopic radiofrequency ablation of hepatic cavernous hemangioma. A preliminary experience with 27 patients.

BACKGROUND: Radiofrequency ablation (RFA), currently used extensively for liver tumors, also has been applied successfully to hepatic cavernous hemangioma (HCH) percutaneously. The aim of this study was to assess the feasibility, safety, and efficacy of laparoscopic RFA for patients with HCHs. METHODS: Between March 2001 and March 2004, 27 patients with symptomatic and rapid-growth lesions were treated by laparoscopic RFA using the RF-2000 generator system. The treatment-related complications were observed. All the patients were followed up with helical computed tomography scans and ultrasonography at regular intervals to assess the therapeutic efficacy of laparoscopic RFA. RESULTS: This study assessed 9 men and 18 women with a mean age of 41.6 +/- 8.3 years. Three additional intrahepatic lesions missed preoperatively were found in three patients on intraoperative ultrasound. A total of 27 patients with 50 liver lesions were treated successfully with laparoscopic RFA. The mean maximum tumor diameter was 5.5 +/- 2.0 cm. The mean length of time for RFA per lesion was 20.7 +/- 11.9 min, and the mean blood loss was 134.4 +/- 88.9 ml. Laparoscopic cholecystectomy was performed simultaneously for gallstones in 13 patients and for abutting of gallbladder from hemangioma in 2 patients. In addition, 3 patients also had a laparoscopic deroofing of simple hepatic cysts. Although postoperative low-grade fever and transient elevation of serum transaminase levels were observed in 13 patients, there were no complications related to laparoscopic RFA. During a median follow-up period of 21 months (range, 12-42 months), complete lesion necrosis was achieved for all the patients. CONCLUSIONS: Laparoscopic RFA therapy is a safe, feasible, and effective treatment option for patients with symptomatic and rapid-growth HCHs located on the surface of the liver or adjacent to the gallbladder. Intraoperative ultrasonography is a useful adjunct for detecting additional liver lesions and offering more accurate targeting for RFA.

[Experience in the surgical treatment of hepatic hydatidosis].

Of 1290 cases of hydatidosis hospitalized, 907 (70.3%) cases of hepatic hydatid cyst (HHC) were treated surgically (1954-1990). Of the 907 cases, 484 (53.3%) were males and 423 (46.7%) females. Hepatic hydatid cysts were single in 54%, multiple in 21.2% and complicated with hydatid cysts of other organs in 24.8%. 67.5% of the cysts were in the right lobe of the liver, 15.6% in the left lobe, 16.9% in both lobes. 79.0% were situated in the right lower part of the liver, 21.0% on the dome of the liver. Rupture of the cysts into biliary system, peritoneal cavity, the thorax (pulmonary-bronchial tree) and the pericardial sac were 35 (30%), 50 (42.6%), 31 (26.5%) and 1 case (0.9%) respectively. There were 5 deaths. Our experiences include: (1) routine intravenous drip of corticosteroids to alleviate the possible occurrence of allergic reaction during the operation and postoperative hyperpyrexia. (2) mebendazole or albendazole (ABZ) 20 mg/kg/d for one week before operation and 1-2 courses (1 course = 30 days) after operation to destroy the protoscoleces left in the body during operation. (3) antibiotics administration in complicated cases. (4) closure of intrahepatic biliary fistula.

[Protoscolicidal effect of some chemical agents and drugs against Echinococcus granulosus].

The present paper reports the protoscolicidal action of hydrastine, ether-acetic acid-ethanol admixture, H2O2, pyquiton and albendazole through in vitro or in vivo exposure, for 15 minutes and transplantation studies. The mortality of protoscolices in vitro and in vivo were 70.2% and 68.9% for 0.3% hydrastine, 56.8% and 56.2% for 10% ether-acetic acid-ethanol admixture, 6.0% and 8.8% for 0.3% H2O2; 6.1% for 0.004% pyquiton in vitro and 5.0% were 10% and 25% for 0.3% hydrastine, 30% and for 0.004% albendazole in vitro. The survival rates after transplantation of protoscolices 37.5% for 10% ether-acetic acid-ethanol admixture, 100% and 95% for 0.3% H2O2 respectively. Disruption of external plasma membrane, hook detachment, sucker deformity of protoscolices exposed to hydrastine were demonstrated by scanning electron microscopy. It is suggested that hydrastine exerts a profound intracellular effect on the protoscolex of E. granulosus of sheep and man, and might be a promising protoscolicide as adjuvant to hydatid surgery.

[Investigation of infiltration glass of the machinable infiltrated ceramic(MIC)].

To explore the manufacture arts and determine the properties of the infiltration glass of the MIC. In order to determine the glass forming range of the MIC infiltration glass, molten glass was prepared in Al2O3 crucibles by heating the components to 1450 degrees C. Thermal analytic device was employed to study the thermal properties of the glass. Its crystal phases after micro-crystallization were analyzed with XRD. Flexural strength was measured by means of 3-point bending test. The chemical components of MIC glass were determined. Conventional fluorophlogopite glass was converted into an infiltration glass with low viscosity, good infiltration capability and low fusing temperature by introducing B2O3, La2O3 and Li2O into the glass. Fluorophlogopite crystals formed after crystallization. Conventional mica glass can be changed according to the requirements of properties. Modified mica MIC glass in this study has good infiltration ability in Al2O3 matrix while remains machinability.

Dyeing and antibacterial activation with methylene blue of a cyclodextrin modified polyester vascular graft.

The aim of this study was to develop an antiseptic and blue dyed polyester (PET) vascular graft in order to reach two distinct properties: (i) the prevention of postoperative infections, (ii) the improvement of the graft compatibility with the coelioscopy surgical technique. This work consisted of dyeing a vascular prosthesis with methylene blue (MB) which is known as a cationic dye with antiseptic properties. Therefore, the functionalization of the PET fibers of the prosthesis with a cyclodextrin-citric acid polymer (PolyCD) was achieved in order to improve its sorption capacity. The NMR experiments demonstrated that a 1:2 complex occurred between hydroxypropyl ß-cyclodextrin (HP-ßCD) and MB. Kinetic and sorption isotherm studies showed that an impregnation of the polyCD modified prosthesis (PET-CD) in a 1 g L(-1) of MB solution for 150 min was sufficient to reach the saturation of the device. Results proved that the adsorption mechanism followed the Langmuir model and a maximum of 20 mg g(-1) of MB on the graft. A sustained release of MB in batch tests was observed in PBS and in vitro microbiological assays displayed a prolongation of the bactericidal effect of PET-CD whose extent varied with the amount of MB preliminarily adsorbed onto the PET-CD.