RESUMO
Orb web spiders are common and highly diversified animals found in almost all habitats. They have remarkable plasticity against biotic and abiotic factors, making them excellent indicators of environmental health. The web creation behavior of spiders is influenced by disturbances in the environment. The aim of this research was to observe the alteration in the web-building behavior of Neoscona vigilans caused by human activities, specifically traffic disturbances. Spider webs were located and photographed at nighttime along the roadside, and their web characteristics were calculated. Spiders were captured from webs for their body measurements. Spider fourth leg length, carapace width, and body length had a significant association with web size and diameter, CTL, capture area, and mesh size. The quantity of trapped prey, the height of the plant, and the foliage radius increased with the distance from the road. Conversely, anchor points and web elevation from the ground dropped. The highest and lowest proportions of anomalies (modifications/defects) were recorded as holes (52.7%) in 105 webs (100%) and supernumerary (0.7%) in 55 webs (52.4%), respectively. Road disturbance had a negative influence on the spider's behavior as the webs formed in close proximity to the road had a higher frequency of anomalies, with a gradual decrease distantly. We can gain further insight into how different environmental changes, disruptions, and pollutants lead to this imperfection in the otherwise flawless perfect structure of spider webs.
RESUMO
This study ventures into the exploration of potential poly-3-hydroxybutyrate (PHB) degradation in alpine environments. PHB-degrading bacteria were identified in both campus soil, representing a residential area, and Mt. Kurodake soil, an alpine region in Hokkaido, Japan. Next-generation sequencing analysis indicated that the campus soil exhibited higher microbial diversity, while Ralstonia insidiosa C1, isolated from Mt. Kurodake soil, displayed the highest proficiency in PHB degradation. R. insidiosa C1 efficiently degraded up to 3% (w/v) of PHB and various films composed of other biopolymers at 14 °C. This bacterium synthesized homopolymers using substrates such as 3-hydroxybutyric acid, sugars, and acetic acid, while also produced copolymers using a mixture of fatty acids. The analysis results confirmed that the biopolymer synthesized by strain C1 using glucose was PHB, with physical properties comparable to commercial products. The unique capabilities of R. insidiosa C1, encompassing both the production and degradation of bioplastics, highlight its potential to establish a novel material circulation model.
Assuntos
Biodegradação Ambiental , Hidroxibutiratos , Poli-Hidroxialcanoatos , Ralstonia , Microbiologia do Solo , Ralstonia/metabolismo , Ralstonia/genética , Poli-Hidroxialcanoatos/metabolismo , Hidroxibutiratos/metabolismo , Hidroxibutiratos/química , Poliésteres/metabolismo , Poliésteres/química , Japão , Poli-HidroxibutiratosRESUMO
Recently, polyhydroxyalkanoates (PHAs) have been produced using raw sewage in our laboratory; however, the production concentrations are low. Therefore, this study aimed to enhance PHA production by applying different strategies. PHA production was higher in sewage-containing medium than in mineral salt medium and was enhanced 22-fold after glucose supplementation. A relatively high degree of glucose consumption (83.6 ± 1.59 %) was also achieved. Bacteria incubated with cheese whey diluted with sewage showed higher PHA production than bacteria incubated with cheese whey diluted with distilled water did. The expression of the PHA synthase gene (phaC) was evaluated via real-time polymerase chain reaction using low- and high-carbon-containing sewage. Relatively higher phaC expression levels were observed in high-carbon-containing sewage but at lower nitrogen concentrations. The characteristics of the produced PHA were comparable to those of standard PHA. Therefore, this study revealed that the bacterium Bacillus sp. CYR1 can produce PHA from low- or high-carbon-containing wastewater.
RESUMO
With the growing interest in bioplastics, there is an urgent need to develop rapid analysis methods linked to production technology development. This study focused on the production of a commercially non-available homopolymer, poly(3-hydroxyvalerate) (P(3HV)), and a commercially available copolymer, poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (P(3HB-co-3HV)), through fermentation using two different bacterial strains. The bacteria Chromobacterium violaceum and Bacillus sp. CYR1 were used to produce P(3HV) and P(3HB-co-3HV), respectively. The bacterium Bacillus sp. CYR1 produced 415 mg/L of P(3HB-co-3HV) when incubated with acetic acid and valeric acid as the carbon sources, whereas the bacterium C. violaceum produced 0.198 g of P(3HV)/g dry biomass when incubated with sodium valerate as the carbon source. Additionally, we developed a fast, simple, and inexpensive method to quantify P(3HV) and P(3HB-co-3HV) using high-performance liquid chromatography (HPLC). As the alkaline decomposition of P(3HB-co-3HV) releases 2-butenoic acid (2BE) and 2-pentenoic acid (2PE), we were able to determine the concentration using HPLC. Moreover, calibration curves were prepared using standard 2BE and 2PE, along with sample 2BE and 2PE produced by the alkaline decomposition of poly(3-hydroxybutyrate) and P(3HV), respectively. Finally, the HPLC results obtained by our new method were compared using gas chromatography (GC) analysis.
RESUMO
Synthetic plastics derived from fossil fuels-such as polyethylene, polypropylene, polyvinyl chloride, and polystyrene-are non-degradable. A large amount of plastic waste enters landfills and pollutes the environment. Hence, there is an urgent need to produce biodegradable plastics such as polyhydroxyalkanoates (PHAs). PHAs have garnered increasing interest as replaceable materials to conventional plastics due to their broad applicability in various purposes such as food packaging, agriculture, tissue-engineering scaffolds, and drug delivery. Based on the chain length of 3-hydroxyalkanoate repeat units, there are three types PHAs, i.e., short-chain-length (scl-PHAs, 4 to 5 carbon atoms), medium-chain-length (mcl-PHAs, 6 to 14 carbon atoms), and long-chain-length (lcl-PHAs, more than 14 carbon atoms). Previous reviews discussed the recent developments in scl-PHAs, but there are limited reviews specifically focused on the developments of mcl-PHAs. Hence, this review focused on the mcl-PHA production, using various carbon (organic/inorganic) sources and at different operation modes (continuous, batch, fed-batch, and high-cell density). This review also focused on recent developments on extraction methods of mcl-PHAs (solvent, non-solvent, enzymatic, ultrasound); physical/thermal properties (Mw, Mn, PDI, Tm, Tg, and crystallinity); applications in various fields; and their production at pilot and industrial scales in Asia, Europe, North America, and South America.
RESUMO
To evaluate the wound-healing effect of Antheraea pernyi epidermal growth factor (ApEGF), we performed the sequence analysis, cloning, and prokaryotic expression of cDNA from the ApEGF gene, examined the transcriptional changes, and investigated the wound-healing effect of this protein in cells and rat epidermis. Primers were designed based on available sequence information related to the ApEGF gene in a public database, and part of the ApEGF sequence was obtained. The full-length cDNA sequence of ApEGF was obtained using inverse PCR. The gene sequence fragment of ApEGF was 666 bp in length, encoding 221 amino acids, with a predicted protein mass of 24.19 kD, an isoelectric point of 5.15, and no signal peptide sequence. Sequence homology analysis revealed 86.1% sequence homology with Bombyx mori, 92.7% with Manducal sexta, 92.6% with Trichoplusia ni, and 91.8% with Helicoverpa armigera. ApEGF was truncated and then subjected to prokaryotic expression, isolation, and purification. Truncated ApEGF was used for wound-healing experiments in vitro and in vivo. The results showed that after 48 h, transforming growth factor (TGF)-ß1 had 187.32% cell growth effects, and the ApEGF group had 211.15% cell growth compared to the control group in vitro. In rat epidermis, truncated ApEGF showed a significantly better healing effect than the control. This result indicated that ApEGF, which exerted a direct wound-healing effect, could be used in wound-healing therapy.
RESUMO
Two rapidly growing propionibacteria that could reductively dechlorinate tetrachloroethylene (PCE) and cis-1,2-dichloroethylene (cis-DCE) to ethylene were isolated from environmental sediments. Metabolic characterization and partial sequence analysis of their 16S rRNA genes showed that the new isolates, designated as strains Propionibacterium sp. HK-1 and Propionibacterium sp. HK-3, did not match any known PCE- or cis-DCE-degrading bacteria. Both strains dechlorinated relatively high concentrations of PCE (0.3 mM) and cis-DCE (0.52 mM) under anaerobic conditions without accumulating toxic intermediates during incubation. Cell-free extracts of both strains catalyzed PCE and cis-DCE dechlorination; degradation was accelerated by the addition of various electron donors. PCE dehalogenase from strain HK-1 was mediated by a corrinoid protein, since the dehalogenase was inactivated by propyl iodide only after reduction by titanium citrate. The amounts of chloride ions (0.094 and 0.103 mM) released after PCE (0.026 mM) and cis-DCE (0.05 mM) dehalogenation using the cell-free enzyme extracts of both strains, HK-1 and HK-3, were stoichiometrically similar (91 and 100%), indicating that PCE and cis-DCE were fully dechlorinated. Radiotracer studies with [1,2-¹4C] PCE and [1,2-¹4C] cis-DCE indicated that ethylene was the terminal product; partial conversion to ethylene was observed. Various chlorinated aliphatic compounds (PCE, trichloroethylene, cis-DCE, trans-1,2-dichloroethylene, 1,1-dichloroethylene, 1,1-dichloroethane, 1,2-dichloroethane, 1,2-dichloropropane, 1,1,2-trichloroethane, and vinyl chloride) were degraded by cell-free extracts of strain HK-1.
Assuntos
Dicloroetilenos/metabolismo , Poluentes Ambientais/metabolismo , Propionibacterium/metabolismo , Tetracloroetileno/metabolismo , Hidrocarbonetos Clorados/metabolismo , Propionibacterium/classificação , Propionibacterium/isolamento & purificação , Tricloroetileno/metabolismo , Cloreto de Vinil/metabolismoRESUMO
Cheese whey (CW) can be an excellent carbon source for polyhydroxyalkanoates (PHA)-producing bacteria. Most studies have used CW, which contains high amounts of lactose, however, there are no reports using raw CW, which has a relatively low amount of lactose. Therefore, in the present study, PHA production was evaluated in a two-stage process using the CW that contains low amounts of lactose. In first stage, the carbon source existing in CW was converted into acetic acid using the bacteria, Acetobacter pasteurianus C1, which was isolated from food waste. In the second stage, acetic acid produced in the first stage was converted into PHA using the bacteria, Bacillus sp. CYR-1. Under the condition of without the pretreatment of CW, acetic acid produced from CW was diluted at different folds and used for the production of PHA. Strain CYR-1 incubated with 10-fold diluted CW containing 5.7 g/L of acetic acid showed the higher PHA production (240.6 mg/L), whereas strain CYR-1 incubated with four-fold diluted CW containing 12.3 g/L of acetic acid showed 126 mg/L of PHA. After removing the excess protein present in CW, PHA production was further enhanced by 3.26 times (411 mg/L) at a four-fold dilution containing 11.3 g/L of acetic acid. Based on Fourier transform infrared spectroscopy (FT-IR), and 1H and 13C nuclear magnetic resonance (NMR) analyses, it was confirmed that the PHA produced from the two-stage process is poly-ß-hydroxybutyrate (PHB). All bands appearing in the FT-IR spectrum and the chemical shifts of NMR nearly matched with those of standard PHB. Based on these studies, we concluded that a two-stage process using Acetobacter pasteurianus C1 and Bacillus sp. CYR-1 would be applicable for the production of PHB using CW containing a low amount of lactose.
RESUMO
Medium-chain fatty acids (MCFA) are saturated monocarboxylic acids and can be used as antimicrobials, corrosion inhibitors, precursors in biodiesel, and bioplastic production. In the present study, MCFA production was evaluated with acetate and ethanol using the bacteria Clostridium kluyveri. Effects of substrate, electron donor, and methane inhibitor on MCFA production were evaluated. Bacteria successfully converted the ethanol and acetate to butyrate (C4), caproate (C6), and caprylate (C8) by chain elongation process. The highest concentrations of butyrate (4.6 g/l), caproate (3.2 g/l), and caprylate (0.5 g/l) were obtained under methane inhibition conditions than other conditions. The productions of butyrate and caproate were 1.6 and 1.48 times higher under methane inhibition conditions, respectively. Results denoted that the bacteria C. kluyveri can be used for conversion of acetate and ethanol into useful products like butyrate and caproate.
Assuntos
Ácido Acético/metabolismo , Clostridium kluyveri/metabolismo , Etanol/metabolismo , Ácidos Graxos/biossíntese , Fermentação , Anaerobiose , Anti-Infecciosos/metabolismo , Ácido Butírico/metabolismo , Caproatos/metabolismo , Caprilatos/metabolismo , Cromatografia Gasosa , Cromatografia Líquida de Alta Pressão , Clostridium kluyveri/crescimento & desenvolvimento , Meios de Cultura , Concentração de Íons de HidrogênioRESUMO
Synthetic wastewater (SW) at various carbon concentrations (5-60g/l) were evaluated for polyhydroxyalkanoates (PHA) production using the bacteria Pseudomonas pseudoflava. Bacteria showed highest PHA production with 20g/l (57±5%), and highest carbon removal at 5g/l (74±6%) concentrations respectively. Structure, molecular weight, and thermal properties of the produced PHA were evaluated using various analytical techniques. Bacteria produced homo-polymer [poly-3-hydroxybutyrate (P3HB)] when only acetate was used as carbon source; and it produced co-polymer [poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) P(3HB-co-3HV)] by addition of co-substrate propionate. PHA synthase, the enzyme which produce PHA was extracted from two bacterial strains i.e., P. pseudoflava and P. palleronii and its molecular weight was analysed using SDS-PAGE. Protein concentration, and PHA synthase enzyme activity of P. pseudoflava and P. palleronii was carried out using spectrophotometer. Results denoted that P. pseudoflava can be used for degradation of organic carbon persistent in wastewaters and their subsequent conversion into PHA.
Assuntos
Poliésteres/metabolismo , Poli-Hidroxialcanoatos/biossíntese , Carbono/metabolismo , Comamonadaceae , Pseudomonas/metabolismo , Águas ResiduáriasRESUMO
The aim of the present study was to assess the bioremediation potential of endophytic bacteria isolated from roots of Tridax procumbens plant. Five bacterial endophytes were isolated and subsequently tested for minimal inhibitory concentration (MIC) against different heavy metals. Amongst the five isolates, strain RM exhibited the highest resistance to copper (750 mg/l), followed by zinc (500 mg/l), lead (450 mg/l), and arsenic (400 mg/l). Phylogenetic analysis of the 16S rDNA sequence suggested that strain RM was a member of genus Paneibacillus. Strain RM also had the capacity to produce secondary metabolites, indole acetic acid, siderophores, 1-aminocyclopropane-1-carboxylate (ACC) deaminase, and biosurfactant and solubilize phosphate. The growth kinetics of strain RM was altered slightly in the presence of metal stress. Temperature and pH influenced the metal removal rate. The results suggest that strain RM can survive under the high concentration of heavy metals and has been identified as a potential candidate for application in bioremediation of heavy metals in contaminated environments.
RESUMO
In the present study, synthetic wastewater (SW) was used for production of poly-3-hydroxybutyrate (P3HB) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) P(3HB-co-3HV) using the bacteria Hydrogenophaga palleronii. SW at various volatile fatty acids concentrations (5-60g/l) was evaluated for the growth and biopolymer production using H. palleronii. Substrate degradation was analyzed using total organic carbon (TOC) analyzer and high pressure liquid chromatography (HPLC). H. palleronii showed highest and lowest removal of TOC at 5g/l (88±4%) and 60g/l (15±6%) respectively. Among all the concentrations evaluated, bacteria showed highest biopolymer production with 20g/l (63±5%), followed by 30g/l (58±3%) and 40g/l (56±2%). Lowest biopolymer production was observed at 5g/l concentration (21±3%). Structure, molecular weight, and thermal properties of the produced biopolymer were analyzed. These results denoted that the strain H. palleronii can be used for degradation of high concentration of volatile fatty acids persistent in wastewaters and their subsequent conversion into useable biopolymers.
Assuntos
Comamonadaceae/metabolismo , Ácidos Graxos Voláteis/metabolismo , Hidroxibutiratos/metabolismo , Poliésteres/metabolismo , Poluentes Químicos da Água/metabolismo , Concentração de Íons de Hidrogênio , Peso Molecular , Ácidos Pentanoicos/metabolismo , Águas Residuárias/química , Purificação da ÁguaRESUMO
Here, we report the whole-genome sequence of Aquamicrobium sp. strain SK-2, a bacterium which can use 2,2',4,4',5,5'-hexachlorobiphenyl as the sole carbon source for its growth. An approximately 9.23-Mb genome sequence of SK-2 will greatly facilitate research efforts regarding the study of the polychlorinated biphenyl (PCB) degradation mechanism.
RESUMO
In the present study five different types of alkylphenols, each of the two different types of mono and poly-aromatic hydrocarbons were selected for degradation, and conversion into poly-3-hydroxybutyrate (PHB) using the Bacillus sp. CYR1. Strain CYR1 showed growth with various toxic organic compounds. Degradation pattern of all the organic compounds at 100 mg/l concentration with or without addition of tween-80 were analyzed using high pressure liquid chromatography (HPLC). Strain CYR1 showed good removal of compounds in the presence of tween-80 within 3 days, but it took 6 days without addition of tween-80. Strain CYR1 showed highest PHB production with phenol (51 ± 5%), naphthalene (42 ± 4%), 4-chlorophenol (32 ± 3%) and 4-nonylphenol (29 ± 3%). The functional groups, structure, and thermal properties of the produced PHB were analyzed. These results denoted that the strain Bacillus sp. CYR1 can be used for conversion of different toxic compounds persistent in wastewaters into useable biological polyesters.
Assuntos
Bacillus/classificação , Bacillus/metabolismo , Hidroxibutiratos/metabolismo , Fenóis/metabolismo , Hidrocarbonetos Policíclicos Aromáticos/metabolismo , Poliésteres/metabolismo , Alquilação , Biodegradação Ambiental , Hidroxibutiratos/isolamento & purificação , Resíduos Industriais/prevenção & controle , Fenóis/isolamento & purificação , Hidrocarbonetos Policíclicos Aromáticos/isolamento & purificação , Poliésteres/isolamento & purificação , Reciclagem/métodos , Especificidade da Espécie , Poluentes Químicos da Água/isolamento & purificação , Poluentes Químicos da Água/metabolismo , Purificação da Água/métodosRESUMO
In the present study, a 2,4-dichlorophenoxyacetic acid (2,4-D) degrading bacterial strain CY-1 was isolated from the forest soil. Based on physiological, biochemical and 16S rRNA gene sequence analysis it was identified as Cupriavidus sp. CY-1. Further 2,4-D degradation experiments at different concentrations (200 to 800 mg l(-1)) were carried out using CY-1. Effect of NaCl and KNO3 on 2,4-D degradation was also evaluated. Degradation of 2,4-D and the metabolites produced during degradation process were analyzed using high pressure liquid chromatography (HPLC) and GC-MS respectively. The amount of chloride ions produced during the 2,4-D degradation were analyzed by Ion chromatography (IC) and it is stoichiometric with 2,4-D dechlorination. Furthermore two different types of soils collected from two different sources were used for 2,4-D degradation studies. The isolated strain CY-1 was bio-augmented into 2,4-D contaminated soils to analyze its degradation ability. Culture independent methods like denaturing gradient gel electrophoresis (DGGE) and terminal restriction fragment length polymorphism (T-RFLP), and culture dependent methods like colony forming units (CFU) and most probable number (MPN) were used to analyze the survivability of strain CY-1 in contaminated soil. Results of T-RFLP were coincident with the DGGE analysis. From the DGGE, T-RFLP, MPN and HPLC results it was concluded that strain CY-1 effectively degraded 2,4-D without disturbing the ecosystem of soil indigenous microorganisms.
Assuntos
Ácido 2,4-Diclorofenoxiacético/metabolismo , Biodegradação Ambiental , Cupriavidus/isolamento & purificação , Cupriavidus/metabolismo , Herbicidas/metabolismo , Poluentes do Solo/metabolismo , Biodiversidade , Cromatografia Líquida de Alta Pressão , Cupriavidus/genética , DNA Bacteriano/genética , Eletroforese em Gel de Gradiente Desnaturante , Ecossistema , Cromatografia Gasosa-Espectrometria de Massas , Nitratos/química , Polimorfismo de Fragmento de Restrição , Compostos de Potássio/química , RNA Ribossômico 16S/genética , Cloreto de Sódio/química , Solo/química , Microbiologia do SoloRESUMO
Effective biological pretreatment method for enhancing cellulase performance was investigated. Two alkali lignin-degrading bacteria were isolated from forest soils in Japan and named CS-1 and CS-2. 16S rDNA sequence analysis indicated that CS-1 and CS-2 were Bacillus sp. Strains CS-1 and CS-2 displayed alkali lignin degradation capability. With initial concentrations of 0.05-2.0 g L(-1), at least 61% alkali lignin could be degraded within 48 h. High laccase activities were observed in crude enzyme extracts from the isolated strains. This result indicated that alkali lignin degradation was correlated with laccase activities. Judging from the net yields of sugars after enzymatic hydrolysis, the most effective pretreatment method for enhancing cellulase performance was a two-step processing procedure (pretreatment using Bacillus sp. CS-1 followed by lactic acid bacteria) at 68.6%. These results suggest that the two-step pretreatment procedure is effective at accelerating cellulase performance.
Assuntos
Álcalis/metabolismo , Bacillus/isolamento & purificação , Bacillus/metabolismo , Bactérias/metabolismo , Celulase/metabolismo , Ácido Láctico/metabolismo , Lignina/metabolismo , Antraquinonas/isolamento & purificação , Biodegradação Ambiental , Glucose/metabolismo , Lacase/metabolismo , Dados de Sequência Molecular , Oryza/química , Microbiologia do Solo , Solubilidade , Fatores de Tempo , ResíduosRESUMO
Four strains of biphenyl-degrading bacteria were isolated from a sewage and identified from the Rhodococcus genus (SK-1, SK-3, and SK-4) and Aquamicrobium genus (SK-2) by 16S rRNA sequence. Among these strains, strain SK-2 was most suitable for biphenyl degradation. When 0.65, 1.3, 2.6, or 3.9 mM of biphenyl was used, the biphenyl was completely degraded within 24 and 96 h of culture, respectively. However, in the case of 6.5 and 9.75 mM of biphenyl, the biphenyl degradation yields were about 80 % and 46.7 % after 120 h of culture, respectively. The isolated strains could degrade a broad spectrum of aromatic compounds including high-chlorinated polychlorinated biphenyl (PCB) congeners in the presence of biphenyl. In addition, strain SK-2 could utilize PCB congeners containing one to six chlorine substituents such as 2,2',4,4',5,5'-hexachlorobiphenyl. The PCB utilization rate by the strain SK-2 was increased compared to that of other PCB congener-utilizing bacteria. The four isolates metabolized 4-chlorobiphenyl to 4-chlorobenzoic acid and 2-hydroxy-6-oxo-6-(4'-chlorophenyl)-hexa-2,4-dienoic acid. These results suggest the isolated strains might be good candidates for the bioremediation of PCB-contaminated soil, especially high-saline soils.
Assuntos
Bifenilos Policlorados/metabolismo , Rhodococcus/isolamento & purificação , Esgotos/microbiologia , Biodegradação Ambiental , Compostos de Bifenilo/metabolismo , Carbono/metabolismo , Clorobenzoatos/metabolismo , Nitratos , Filogenia , Compostos de Potássio , RNA Bacteriano/genética , RNA Ribossômico 16S/genética , Rhodococcus/genética , Rhodococcus/metabolismo , Cloreto de Sódio , Especificidade da EspécieRESUMO
For biological extraction of heavy metals from chromated copper arsenate (CCA) treated wood, different bacteria were investigated. The extraction rates of heavy metals using Lactobacillusbulgaricus and Streptococcusthermophilus were highest. The chemical extraction rates were depended on the amounts of pyruvic acid and lactic acid. Especially, the extraction rates using mixed pyruvic acid and lactic acid were increased compared to those of sole one. They were also enhanced in the mixed culture of L. bulgaricus and S. thermophilus. To improve the extraction of CCA, a two-step processing procedure with the mixed culture of L. bulgaricus and S. thermophilus was conducted. A maximum of 93% of copper, 86.5% of chromium, and 97.8% of arsenic were extracted after 4 days. These results suggest that a two-step process with the mixed culture of L. bulgaricus and S. thermophilus is most effective to extract heavy metals from CCA treated wood.
Assuntos
Recuperação e Remediação Ambiental/métodos , Lactobacillus/metabolismo , Metais Pesados/isolamento & purificação , Streptococcus thermophilus/metabolismo , Arseniatos/química , Biodegradação Ambiental , Meios de Cultura/farmacologia , Concentração de Íons de Hidrogênio/efeitos dos fármacos , Ácido Láctico/análise , Lactobacillus/efeitos dos fármacos , Lactobacillus/crescimento & desenvolvimento , Ácido Pirúvico/análise , Streptococcus thermophilus/efeitos dos fármacos , Streptococcus thermophilus/crescimento & desenvolvimento , Madeira/químicaRESUMO
The accelerated removal of bisphenols A and F (BPA, BPF) was observed in the rhizosphere sediment of Phragmites australis, while they persisted in the absence of P. australis. A BPA-degrading bacterium, Novosphingobium sp. strain TYA-1, and a BPF-degrading bacterium, Sphingobium yanoikuyae strain TYF-1, were isolated from the rhizosphere of P. australis. The results suggested that interactions between P. australis and these bacteria can accelerate the removal of bisphenols from sediment.
Assuntos
Fenóis/metabolismo , Poaceae/microbiologia , Rizoma/microbiologia , Sphingomonadaceae/crescimento & desenvolvimento , Poluentes Químicos da Água/metabolismo , Compostos Benzidrílicos , Biodegradação Ambiental , Sphingomonadaceae/isolamento & purificação , Sphingomonadaceae/metabolismoRESUMO
The bacterial community structure in bulk water and in rhizosphere fractions of giant duckweed, Spirodela polyrrhiza, was quantitatively and qualitatively investigated by PCR-based methods using 6 environmental water samples to elucidate the mechanisms underlying selective accumulation of aromatic compound-degrading bacteria in the rhizosphere of S. polyrrhiza. S. polyrrhiza selectively accumulated a diverse range of aromatic compound-degrading bacteria in its rhizosphere, regardless of the origin of water samples, despite no exposure to phenol. The relative abundances of the catechol 1,2-dioxygenase (C12O) gene (C12O DNA) and catechol 2,3-dioxygenase (C23O) gene (C23O DNA) were calculated as the ratios of the copy numbers of these genes to the copy number of 16S rDNA and are referred to as the rhizosphere effect (RE) value. The RE values for C12O DNA and C23O DNA were 1.0 x 10(1)-9.3 x 10(3) and 1.7 x 10(2)-1.5 x 10(4) times as high, respectively, in rhizosphere fractions as in bulk water fractions, and these higher values were associated with a notably higher sequence diversity of C12O DNA and C23O DNA. The RE values during phenol degradation were 3.6 x 10(0)-4.3 x 10(2) and 2.2 x 10(0)-1.7 x 10(2), respectively, indicating the ability of S. polyrrhiza to selectively accumulate aromatic compound-degrading bacteria in its rhizosphere during phenol degradation. The bacterial communities in the rhizosphere fractions differed from those in the bulk water fractions, and those in the bulk water fractions were notably affected by the rhizosphere bacterial communities. S. polyrrhiza released more than 100 types of phenolic compound into its rhizosphere as root exudates at the considerably high specific release rate of 1520mg TOC and 214mg phenolic compounds/d/g root (wet weight). This ability of S. polyrrhiza might result in the selective recruitment and accumulation of a diverse range of bacteria harboring genes encoding C12O and C23O, and the subsequent accelerated degradation of phenol in the rhizosphere.