Phase quadrature discrimination based on three-pump four-wave mixing in nonlinear optical fibers.

We theoretically and experimentally study the principle of phase-sensitive frequency conversion in a highly-nonlinear fiber using three pump waves. This mechanism, originally demonstrated with four continuous-wave pumps and a signal wave, is based on four-wave mixing and enables to convert the two quadrature components of the signal to different frequencies. In this work, we derive a set of two simple equations to describe this mechanism and find analytic solutions. We show that only three pumps are required, instead of four as originally proposed. We give simple relations to determine the initial conditions for the power levels and the phases of the pumps. To validate this approach, we perform an experimental demonstration of the three-pump scheme and find excellent agreement with the theory.

Wavelength conversion in a highly nonlinear chalcogenide microstructured fiber.

We report on all-optical wavelength conversion of a 56 Gb/s differential quadrature phase shift keying signal and a 42.7 Gb/s on-off keying signal. Wavelength conversion is based on four-wave mixing effect in a 1 m long highly nonlinear GeAsSe chalcogenide fiber. The high nonlinearity of the fiber allows low-power penalty operation with a total average power of less than 60 mW.

Modal decomposition technique for multimode fibers.

We propose a new solution for modal decomposition in multimode fibers, based on a spectral and spatial imaging technique. The appearance of spurious modes in the spectral and spatial processing of the images at the output of the fiber under test when it has more than two modes is demonstrated theoretically. The new method, which allows us to identify spurious modes, is more accurate, simpler, and faster than previously reported methods. For demonstration, measurements in a standard step-index multimode fiber and a small-core microstructured fiber are carried out successfully.

Efficient four-wave mixing in an ultra-highly nonlinear suspended-core chalcogenide As38Se62 fiber.

We report a chalcogenide suspended-core fiber with ultra-high nonlinearity and low attenuation loss. The glass composition is As(38)Se(62).With a core diameter as small as 1.13 µm, a record Kerr nonlinearity of 46,000 W(-1) km(-1) is demonstrated with attenuation loss of 0.9 dB/m. Four-wave mixing is experimented by using a 1m-long chalcogenide fiber for 10 GHz and 42.7 GHz signals. Four-wave mixing efficiencies of -5.6 dB at 10 GHz and -17.5 dB at 42.7 GHz are obtained. We also observed higher orders of four-wave mixing for both repetition rates.

Casting method for producing low-loss chalcogenide microstructured optical fibers.

We report significant advances in the fabrication of low loss chalcogenide microstructured optical fiber (MOF). This new method, consisting in molding the glass in a silica cast made of capillaries and capillary guides, allows the development of various designs of fibers, such as suspended core, large core or small core MOFs. After removing the cast in a hydrofluoric acid bath, the preform is drawn and the design is controlled using a system applying differential pressure in the holes. Fiber losses, which are the lowest recorded so far for selenium based MOFs, are equal to the material losses, meaning that the process has no effect on the glass quality.

Self-phase-modulation-based 2R regenerator including pulse compression and offset filtering for 42.6 Gbit/s RZ-33% transmission systems.

We report on the experimental and theoretical study of a self-phase-modulation-based regenerator at 42.6 Gbit/s with a return-to-zero 33% format. We point out some detrimental effects such as intrachannel interactions and Brillouin scattering. An efficient solution, relying on a self-phase-modulation-based pulse compressor in combination with the regenerator, is proposed to overcome these detrimental phenomena. The experimental demonstration shows the effectiveness of a wavelength-transparent regenerator at 42.6 Gbit/s with a sensitivity-improvement of more than 5 dB and an eye-opening improvement of 2.3 dB in a back-to-back configuration, as well as a 10 times maximum transmission distance improvement for a BER of 10(-4).

Pre-osteoblast cell colonization of porous silicon substituted hydroxyapatite bioceramics: Influence of microporosity and macropore design.

Silicate-substituted hydroxyapatite scaffolds containing multiscale porosity are manufactured. Model parts containing macropores of five cross-sectional geometries (circle, square, rhombus, star and triangle) and two sizes are shaped by microstereolithography. Three open microporosity contents (0.5, 23 or 37 vol%) are introduced in the ceramic. MC3T3-E1 pre-osteoblasts are seeded onto these scaffolds. Analysis of cell colonization inside the macropores after 7 and 14 days of cultivation shows that the cellular filling is proportional to the macropore size and strongly influenced by macropore shape. Straight edges and convex surfaces are detrimental. High aspect ratios, the absence of reentrant angles and the presence of acute angles, by creating concavities and minimizing flat surfaces, facilitate cell colonization. Rhombus and triangle cross-sections are thus particularly favorable, while square and star geometries are the least favored. An increase in the microporosity content strongly impairs cell growth in the macropores. The data are statistically analyzed using a principal components analysis that shows that macro- and microtopographical parameters of scaffolds must be collectively considered with correlated interactions to understand cell behavior. The results indicate the important cell sensing of topography during the initial step of cell adhesion and proliferation and evidence the need for an optimized scaffold design.

High permittivity processed SrTiO3 for metamaterials applications at terahertz frequencies.

High permittivity SrTiO3 for the realization of all-dielectric metamaterials operating at terahertz frequencies was fabricated. A comparison of different processing methods demonstrates that Spark Plasma Sintering is the most effective sintering process to yield high density ceramic with high permittivity. We compare this sintering process with two other processes. The fabricated samples are characterized in the low frequency and in the terahertz frequency ranges. Their relative permittivities are compared with that of a reference SrTiO3 single crystal. The permittivity of the sample fabricated by Spark Plasma Sintering is as high as that of the single crystal. The role of the signal-to-noise ratio in the measurements at terahertz frequency is detailed.

Fabrication of complex structures of Holey Fibers in Chalcogenide glass.

We report recent progress on fabrication of solid core microstructured fibers in chalcogenide glass. Several complex and regular holey fibers from Ga5Ge20Sb10S65 chalcogenide glass have been realized. We demonstrate that the "Stack & Draw" procedure is a powerful tool against crystallisation when used with a very stable chalcogenide glass. For a 3 ring multimode Holey Fiber, we measure the mode field diameter of the fundamental mode and compare it successfully with calculations using the multipole method. We also investigate, via numerical simulations, the behaviour of fundamental mode guiding losses of microstructured fibers as a function of the matrix refractive index, and quantify the advantage obtained by using a high refractive index glass such as chalcogenide instead of low index glass.

Noise reduction in 2R-regeneration technique utilizing self-phase modulation and filtering.

We numerically investigate the 2R-regeneration technique utilizing self-phase modulation and off-center filtering. Our numerical simulations take into account the incoherent nature of noise through its spectral representation. This approach allows to evaluate a Q-factor improvement of 2 dB for this regenerator. Furthermore, our study points out the role of both the input and the output filter of this regenerator. We show that the input filter must be suitably chosen in order to obtain the best Q-factor improvement. The output filter must also be suitably chosen in order to preserve the modulation format.

Measurement of the stress-optic coefficient of single-mode fibers using a magneto-optic method.

We present the magneto-optic method to measure the local birefringence of single-mode fibers. We use this method to study birefringence of various telecommunication fibers submitted to external twist. Analysis of measurements gives access to the linear and circular part of the birefringence. This allows to evaluate the stress-optic coefficient g with a good accuracy for each fiber.

A new custom made bioceramic implant for the repair of large and complex craniofacial bone defects.

INTRODUCTION: Neurosurgery and Maxillofacial Surgery Departments of Limoges University Hospital Centre have developed a new concept of a custom made ceramic implant in hydroxyapatite (HA) for the reconstruction of large and complex craniofacial bone defects (more than 25 cm(2)). MATERIALS AND METHODS: The manufacturing process of the implants used a stereolithography technique that produces implants with three-dimensional shapes derived directly from the scan file of the patient's skull without moulding or machining. Eight patients received 8 implants between 2005 and 2008. RESULTS: The surgical procedure is simple and fast. The post-operative follow-up was 12 months. No major complications (infection or fracture of the implant) were observed. The cosmetic result was considered satisfactory by both patients and surgeons. CONCLUSIONS: These new implants are well suited for reconstruction of large craniofacial bone defects (greater than 25 cm(2)) in adults and children over 8 years.

Evidence of Brillouin scattering in an ytterbium-doped double-clad fiber laser.

We have designed and performed an experiment that permitted direct observation of Brillouin backscattering in an Yb-doped double-clad fiber laser. Fifteen Brillouin-shifted frequencies were observed for the first time to our knowledge. We clearly demonstrate that stimulated Brillouin scattering is directly responsible for both fast transient dynamics of the laser and reduction of the laser's pulse width.

90-fs stretched-pulse ytterbium-doped double-clad fiber laser.

We report ultrashort, high-energy pulse generation from a side-pumped Yb-doped double-clad fiber laser. The laser is operating in the stretched-pulse regime. It directly generates 4.8-ps, 5-nJ pulses that are extracavity compressed to 90 fs.