RESUMO
Grain size and weight are crucial yield-related traits in rice (Oryza sativa). Although certain key genes associated with rice grain size and weight have been successfully cloned, the molecular mechanisms underlying grain size and weight regulation remain elusive. Here, we identified a molecular pathway regulating grain size and weight in rice involving the MPS ONE BINDER KINASE ACTIVATOR-LIKE 1A-SERINE/THREONINE-PROTEIN KINASE 38-CYCLIN C (OsMOB1A-OsSTK38-OsCycC) module. OsSTK38 is a nuclear Dbf2-related kinase that positively regulates grain size and weight by coordinating cell proliferation and expansion in the spikelet hull. OsMOB1A interacts with and enhances the autophosphorylation of OsSTK38. Specifically, the critical role of the OsSTK38 S322 site in its kinase activity is highlighted. Furthermore, OsCycC, a component of the Mediator complex, was identified as a substrate of OsSTK38, with enhancement by OsMOB1A. Notably, OsSTK38 phosphorylates the T33 site of OsCycC. The phosphorylation of OsCycC by OsSTK38 influenced its interaction with the transcription factor KNOTTED-LIKE HOMEOBOX OF ARABIDOPSIS THALIANA 7 (OsKNAT7). Genetic analysis confirmed that OsMOB1A, OsSTK38, and OsCycC function in a common pathway to regulate grain size and weight. Taken together, our findings revealed a connection between the Hippo signaling pathway and the cyclin-dependent kinase module in eukaryotes. Moreover, they provide insights into the molecular mechanisms linked to yield-related traits and propose innovative breeding strategies for high-yielding varieties.
Assuntos
Ciclina C , Grão Comestível , Regulação da Expressão Gênica de Plantas , Oryza , Proteínas de Plantas , Oryza/genética , Oryza/metabolismo , Oryza/enzimologia , Fosforilação , Proteínas de Plantas/metabolismo , Proteínas de Plantas/genética , Ciclina C/metabolismo , Ciclina C/genética , Grão Comestível/genética , Grão Comestível/metabolismo , Grão Comestível/crescimento & desenvolvimento , Proteínas Serina-Treonina Quinases/metabolismo , Proteínas Serina-Treonina Quinases/genética , Plantas Geneticamente ModificadasRESUMO
Although transition-metal nitrides have been widely applied for several decades, experimental investigations of their high-resolution electronic band structures are rare due to the lack of high-quality single-crystalline samples. Here, we report on the first momentum-resolved electronic band structures of titanium nitride (TiN) films, which are remarkable nitride superconductors. The measurements of the crystal structures and electrical transport properties confirmed the high quality of these films. More importantly, from a combination of high-resolution angle-resolved photoelectron spectroscopy and first-principles calculations, the extracted Coulomb interaction strength of TiN films can be as large as 8.5 eV, whereas resonant photoemission spectroscopy yields a value of 6.26 eV. These large values of Coulomb interaction strength indicate that superconducting TiN is a strongly correlated system. Our results uncover the unexpected electronic correlations in transition-metal nitrides, potentially providing a perspective not only to understand their emergent quantum states but also to develop their applications in quantum devices.
RESUMO
Diamond is considered the most promising next-generation semiconductor material due to its excellent physical characteristics. It has been more than three decades since the discovery of a special structure named n-diamond. However, despite extensive efforts, its crystallographic structure and properties are still unclear. Here, we show that subdisordered structures in diamond provide an explanation for the structural feature of n-diamond. Monocrystalline diamond with subdisordered structures is synthesized via the chemical vapor deposition method. Atomic-resolution scanning transmission electron microscopy characterizations combined with the picometer-precision peak finder technology and diffraction simulations reveal that picometer-scale shifts of atoms within cells of diamond govern the subdisordered structures. First-principles calculations indicate that the bandgap of diamond decreases rapidly with increasing shifting distance, in accordance with experimental results. These findings clarify the crystallographic structure and electronic properties of n-diamond and provide new insights into the bandgap adjustment in diamond.
RESUMO
The translocation of photosynthate carbohydrates, such as sucrose, is critical for plant growth and crop yield. Previous studies have revealed that sugar transporters, plasmodesmata and sieve plates act as important controllers in sucrose loading into and unloading from phloem in the vascular system. However, other pivotal steps for the regulation of sucrose movement remain largely elusive. In this study, characterization of two starch excesses in mesophyll (sem) mutants and dye and sucrose export assays were performed to provide insights into the regulatory networks that drive source-sink relations in rice. Map-based cloning identified two allelic mutations in a gene encoding a GLUCAN SYNTHASE-LIKE (GSL) protein, thus indicating a role for SEM1 in callose biosynthesis. Subcellular localization in rice showed that SEM1 localized to the plasma membrane. In situ expression analysis and GUS staining showed that SEM1 was mainly expressed in vascular phloem cells. Reduced sucrose transport was found in the sem1-1/1-2 mutant, which led to excessive starch accumulation in source leaves and inhibited photosynthesis. Paraffin section and transmission electron microscopy experiments revealed that less-developed vascular cells (VCs) in sem1-1/1-2 potentially disturbed sugar movement. Moreover, dye and sugar trafficking experiments revealed that aberrant VC development was the main reason for the pleiotropic phenotype of sem1-1/1-2. In total, efficient sucrose loading into the phloem benefits from an optional number of VCs with a large vacuole that could act as a buffer holding tank for sucrose passing from the vascular bundle sheath.
Assuntos
Transporte Biológico/genética , Células do Mesofilo/metabolismo , Oryza/genética , Oryza/fisiologia , Floema/metabolismo , Amido/genética , Amido/metabolismo , Açúcares/metabolismo , Transporte Biológico/fisiologia , Produtos Agrícolas/genética , Produtos Agrícolas/fisiologia , Regulação da Expressão Gênica de Plantas , Genes de PlantasRESUMO
Modifications of plant architecture can increase planting density, regulate photosynthesis, and improve crop yields. Many basic helix-loop-helix (bHLH) transcription factors participate in the brassinosteroid (BR) signaling pathway and are critical for plant architecture morphogenesis in rice. However, the number of identified bHLH genes suitable for improving production value is still limited. In this study, we cloned Lam1, encoding the typical bHLH transcription factor OsbHLH92. OsbHLH92 knockout (KO) lines exhibit erect leaves. Decreases in the number and size of parenchyma cell layers on the adaxial side of the lamina joint in KO lines were the main reason for the decreased leaf angle. Genetic experiments verify that OsBU1 and its homologs are downstream of OsbHLH92, which is involved in the noncanonical RGA1-mediated BR signaling pathway. OsbHLH91, an OsbHLH92 homolog, plays both conserved and differentiated roles relative to OsbHLH92. Notably, OsbHLH92-KO lines show erect leaves without the acquisition of adverse agronomic traits. Moreover, by driving a specific panicle promoter, OsbHLH92 can greatly increase productivity by at least 10%. This study identifies new components of the BR signaling pathway, demonstrates the importance of OsbHLH92 in improving planting density and crop productivity, and broadens our knowledge of typical and atypical bHLH family members in rice.
RESUMO
Photosynthesis is a process that uses solar energy to fix CO2 in the air and converts it into sugar, and ultimately powers almost all life activities on the earth. C3 photosynthesis is the most common form of photosynthesis in crops. Current efforts of increasing crop yields in response to growing global food requirement are mostly focused on improving C3 photosynthesis. In this review, we summarized the strategies of C3 photosynthesis improvement in terms of Rubisco properties and photorespiratory limitation. Potential engineered targets include Rubisco subunits and their catalytic sites, Rubisco assembly chaperones, and Rubisco activase. In addition, we reviewed multiple photorespiratory bypasses built by strategies of synthetic biology to reduce the release of CO2 and ammonia and minimize energy consumption by photorespiration. The potential strategies are suggested to enhance C3 photosynthesis and boost crop production.
Assuntos
Fenômenos Bioquímicos , Ribulose-Bifosfato Carboxilase , Ribulose-Bifosfato Carboxilase/metabolismo , Dióxido de Carbono , Fotossíntese/fisiologia , Produtos Agrícolas/fisiologiaRESUMO
NOx storage-reduction (NSR), a promising approach for removing NOx pollutants from diesel vehicles, remains elusive to cope with the increasingly lower exhaust temperatures (especially below 250 °C). Here, we develop a conceptual electrified NSR strategy, where electricity with a low input power (0.5-4 W) is applied to conductive Pt and K co-supported antimony-doped tin oxides (Pt-K/ATO), with C3H6 as a reductant. The ignition temperature for 10% NOx conversion is nearly 100 °C lower than that of the traditional thermal counterpart. Furthermore, reducing the power in the fuel-lean period relative to that in the fuel-rich period increases the maximum energy efficiency by 23%. Electrically driven release of lattice oxygen is revealed to play vital roles in multiple steps in NSR, including NO adsorption, desorption, and reduction, for improved NSR activity. This work provides an electrification strategy for developing high-activity NSR catalysis utilizing electricity onboard hybrid vehicles.
Assuntos
Poluentes Atmosféricos , Óxidos de Nitrogênio , Óxidos de Nitrogênio/análise , Temperatura , Estanho , Antimônio , Óxidos , Emissões de Veículos/análise , Catálise , Poluentes Atmosféricos/análiseRESUMO
Insect cuticle is a fiber-reinforced composite material that consists of polysaccharide chitin fibers and a protein matrix. The molecular interactions between insect cuticle proteins and chitin that govern the assembly and evolution of cuticles are still not well understood. Herein, we report that Ostrinia furnacalis cuticular protein hypothetical-1 (OfCPH-1), a newly discovered and most abundant cuticular protein from Asian corn borer O. furnacalis, can form coacervates in the presence of chitosan. The OfCPH-1-chitosan coacervate microdroplets are initially liquid-like but become gel-like with increasing time or salt concentration. The liquid-to-gel transition is driven by hydrogen-bonding interactions, during which an induced ß-sheet structure of OfCPH-1 is observed. Given the abundance of OfCPH-1 in the cuticle of O. furnacalis, this liquid-liquid phase separation process and its aging behavior could play critical roles in the formation of the cuticle.
Assuntos
Quitosana , Mariposas , Animais , Quitina/química , Proteínas de Insetos/química , Insetos , Mariposas/metabolismoRESUMO
Garlic is a popular culinary herb for the prevention and treatment of alcoholic liver disease (ALD). Diallyl Trisulfide (DATS) is the major organosulfur compound of garlic. Latest studies indicated that the hepatocyte pyroptosis serves a primary role in the pathogenesis of ALD. The present study aims to assess the inhibitory effect of DATS on alcohol-induced hepatocyte pyroptosis, and to elucidate the potential mechanism by using the hepatocyte cell line HL-7702. Our study found that DATS inhibited alcohol-induced pyroptosis by decreasing gasdermin D (GSDMD) activation. Results illuminated that DATS inhibited alcohol-induced (NOD)-like receptor containing pyrin domain 3 (NLRP3) inflammasome activation by reducing intracellular reactive oxygen species (ROS) accumulation. Furthermore, DATS upregulated hydrogen sulfide (H2S) to resist ROS overproduction. The present study demonstrated that DATS mitigated alcohol-induced hepatocyte pyroptosis by increasing the intracellular level of H2S.
Assuntos
Compostos Alílicos , Alho , Sulfeto de Hidrogênio , Sulfeto de Hidrogênio/farmacologia , Sulfeto de Hidrogênio/metabolismo , Espécies Reativas de Oxigênio/metabolismo , Piroptose , Inflamassomos , Proteína 3 que Contém Domínio de Pirina da Família NLR , Apoptose , Compostos Alílicos/farmacologia , Sulfetos/farmacologia , Hepatócitos/metabolismo , Etanol , Antioxidantes/farmacologiaRESUMO
INTRODUCTION: Unilateral condylar hyperplasia (UCH) is a progressive, nonneoplastic overgrowth of the condyle of the temporomandibular joint. For treating active UCH, a popular method combines orthognathic surgery with high condylectomy and orthodontic treatment. The goal of this study was to introduce a new method to correct asymmetry for active UCH. METHODS: Retrospectively, 47 patients with active UCH were divided into horizontal-type, vertical-type, and combined-type. All patients were treated with condylectomy plus postsurgery standard orthodontics (CPSO) with applied miniscrews implanted in infrazygomatic crest and hard palate to intrude affected side of maxillary molars and apply intermaxillary traction for contralateral molars. Cone-beam computed tomography was taken at presurgery, postsurgery, and the end of orthodontics (T3). RESULTS: In the vertical (n = 10) and combined (n = 28) types, deviation of the chin and the canting of the mandible and maxillary occlusal plane were significantly reduced at T3. A difference in the torque of bilateral maxillary first molar (U6) and bilateral mandibular first molar (L6) was significantly reduced at T3. The anterior, superior, and posterior joint spaces in the vertical-type and combined-type were significantly decreased at T3 compared with postsurgery. In contrast, in the horizontal-type group (n = 9), the deviation of the chin was corrected; however, the canting of the mandible and maxillary occlusal plane was significantly increased at T3 compared with presurgery. CONCLUSIONS: CPSO restored facial and occlusal symmetry for vertical-type and combined-type active UCH and returned affected-side condyle to the glenoid fossa. However, CPSO was not suitable for treating the horizontal-type UCH.
Assuntos
Assimetria Facial , Côndilo Mandibular , Assimetria Facial/diagnóstico por imagem , Assimetria Facial/cirurgia , Humanos , Hiperplasia/diagnóstico por imagem , Hiperplasia/patologia , Hiperplasia/cirurgia , Mandíbula , Côndilo Mandibular/diagnóstico por imagem , Côndilo Mandibular/patologia , Côndilo Mandibular/cirurgia , Estudos RetrospectivosRESUMO
Lithium-ion batteries (LIBs) have been widely applied and studied as an effective energy supplement for a variety of electronic devices. Titanium dioxide (TiO2 ), with a high theoretical capacity (335 mAh g-1 ) and low volume expansion ratio upon lithiation, has been considered as one of the most promising anode materials for LIBs. However, the application of TiO2 is hindered by its low electrical conductivity and slow ionic diffusion rate. Herein, a 2D ultrathin mesoporous TiO2 /reduced graphene (rGO) heterostructure is fabricated via a layer-by-layer assembly process. The synergistic effect of ultrathin mesoporous TiO2 and the rGO nanosheets significantly enhances the ionic diffusion and electron conductivity of the composite. The introduced 2D mesoporous heterostructure delivers a significantly improved capacity of 350 mAh g-1 at a current density of 200 mA g-1 and excellent cycling stability, with a capacity of 245 mAh g-1 maintained over 1000 cycles at a high current density of 1 A g-1 . The in situ transmission electron microscopy analysis indicates that the volume of the as-prepared 2D heterostructures changes slightly upon the insertion and extraction of Li+ , thus contributing to the enhanced long-cycle performance.
RESUMO
The nanocrystal-in-glass (nanocrystals embedded amorphous matrix) tungsten oxide (WO3) thin films with a nanoporous characteristic were prepared via an electron beam evaporation technique. The e-beam evaporated WO3 thin films present a fast colored/bleached time of 16/11, 16/14, and 12/12 s, a large optical modulation of 92, 91, and 87% at 633 nm, and a high coloration efficiency of 61.78, 62.04, and 67.59 cm2 C-1 in Li+, Na+, and Al3+ electrolytes, respectively. On one hand, the improved electrochromic performance is mainly attributed to the short diffusion distance and buffering effect in the host matrix, which facilitates the ion insertion/extraction and alleviates the structural collapse of the framework. On the other, owing to the strong electrostatic interactions between the trivalent cations and the host, the WO3 thin films in Al3+ possess a shallow diffusion depth and long cycle life. The individual contribution from the capacitance- or diffusion-controlled process is comprehensively demonstrated. Pseudocapacitive behavior in the nanocrystal-in-glass WO3 thin films is in favor of fast kinetics response and sound cycling stability. Our work offers an in-depth insight of the electrochromic mechanism for nanocrystal-in-glass WO3 thin films in various electrolytes and sheds light on the fundamental principle in the electrochromic devices.
RESUMO
Nanostructures in silicon (Si) induced by phase transformations have been investigated during the past 50 years. Performances of nanostructures are improved compared to that of bulk counterparts. Nevertheless, the confinement and loading conditions are insufficient to machine and fabricate high-performance devices. As a consequence, nanostructures fabricated by nanoscale deformation at loading speeds of m/s have not been demonstrated yet. In this study, grinding or scratching at a speed of 40.2 m/s was performed on a custom-made setup by an especially designed diamond tip (calculated stress under the diamond tip in the order of 5.11 GPa). This leads to a novel approach for the fabrication of nanostructures by nanoscale deformation at loading speeds of m/s. A new deformation-induced nanostructure was observed by transmission electron microscopy (TEM), consisting of an amorphous phase, a new tetragonal phase, slip bands, twinning superlattices, and a single crystal. The formation mechanism of the new phase was elucidated by ab initio simulations at shear stress of about 2.16 GPa. This approach opens a new route for the fabrication of nanostructures by nanoscale deformation at speeds of m/s. Our findings provide new insights for potential applications in transistors, integrated circuits, diodes, solar cells, and energy storage systems.
RESUMO
Nanoparticles covered with surfactants are often used to study particle motion patterns and self-assembly processes in solutions. Surfactants have influence on the interparticle interactions and therefore on the particle motion tracks and final patterns. In this study, CoPt nanoparticles are synthesized in aqueous solution without any surfactant. In situ transmission electron microscopy observation is performed to monitor the self-assemble process. Two types of magnetic nanoparticle superlattice arrays are formed: hexagonal equal distance superlattice arrays when particle size is 3 nm, and tight unequal distance superlattice arrays when particle size is 4.5 nm. It is interesting to observe that two small arrays merge into a large one through rotational and translational movements. A Monte Carlo simulation is carried out which successfully restores the whole process. It is identified that the underlying forces are van der Waals and magnetic dipolar interactions. The latter is responsible for orientation of each particle during the whole process. This investigation leads to a better understanding of the formation mechanism of magnetic nanoparticle superlattice arrays.
RESUMO
Gold nanoparticle (AuNP) assemblies (GNAs) have attracted attention since enhanced coupling plasmonic resonance (CPR) emerged in the nanogap between coupling AuNPs. For one dimensional GNAs (1D-GNAs), most CPR from the nanogaps could be easily activated by electromagnetic waves and generate drastically enhanced CPR because the nanogaps between coupling AuNPs are linearly distributed in the 1D-GNAs. The reported studies focus on the synthesis of 1D-GNAs and fundamental exploration of CPR. There are still problems which impede further applications in nanomedicine, such as big size (>500 nm), poor water solubility, and/or poor stability. In this study, a kind of 1D flexible caterpillar-like GNAs (CL-GNAs) with ultrasmall nanogaps, good water solubility, and good stability is developed. The CL-GNAs have a flexible structure that can randomly move to change their morphology, which is rarely reported. Numerous ultrasmall nanogaps (<1 nm) are linearly distributed along the structure of CL-GNAs and generate enhanced CPR. The toxicity assessments in vitro and vivo respectively demonstrate that CL-GNAs have a low cytotoxicity and good biocompatibility. The CL-GNAs can be used as an efficient photothermal agent for photothermal therapy, a probe for Raman imaging and photothermal imaging.
Assuntos
Diagnóstico por Imagem , Ouro/química , Hipertermia Induzida , Nanopartículas Metálicas/química , Fototerapia , Animais , Feminino , Humanos , Células MCF-7 , Nanopartículas Metálicas/ultraestrutura , Camundongos Nus , Soroalbumina Bovina/química , Análise Espectral RamanRESUMO
BACKGROUND: A high density of blood vessels is observed in the perforated disks of temporomandibular joint (TMJ), but the underlying mechanism is unknown. This study aimed to explore the regulation of disk angiogenesis in the perforated disks. METHODS: Expressions of vascular endothelial growth factor (VEGF), angiogenin-1 (Ang-1), chondromodulin-1 (ChM-1), and thrombospondins-1 (TSP-1) were compared between healthy and perforated TMJ disk cells with or without interleukin-1ß (IL-1ß) incubation. The tube formation, cell migration, and expressions of matrix-metalloproteinases (MMPs) in human umbilical vein endothelial cell line (HUV-EC-C) were investigated in conditional media of disk cells. Western blot was performed to determine protein level of VEGF, Ang-1, ChM-1 and TSP-1 in IL-1ß-induced disk cells cultured by NF-κB- or P38-specific pathway inhibitors, respectively. RESULTS: Conditional media from perforated disk cells induced more tube formation, cell migration, and MMPs' expression in HUV-EC-C. Expressions of VEGF and Ang-1 were significantly higher, and ChM-1 and TSP-1 were lower in perforated disks compared to healthy disks. The VEGFA concentration was 291.1 ± 36.09 pg/ml in perforated disk cell conditioned media, markedly larger than that in NDCCM (144.9 ± 33.69 pg/ml). IL-1ß induced VEGF through NF-κB signaling pathway and Ang-1 through p38 MAPK pathway, while repressed expression of ChM-1 and TSP-1 was through NF-κB pathway. Blockade of each pathway markedly restrained inducing effect of cultural media on HUV-EC-C tube formation and migration. CONCLUSIONS: Perforated disk cells secreted more angiogenic factors which might induced via NF-κB pathway.
Assuntos
Proteínas Angiogênicas/metabolismo , Interleucina-1beta/metabolismo , NF-kappa B/metabolismo , Disco da Articulação Temporomandibular/irrigação sanguínea , Transtornos da Articulação Temporomandibular/metabolismo , Adulto , Movimento Celular/efeitos dos fármacos , Proliferação de Células/efeitos dos fármacos , Feminino , Células Endoteliais da Veia Umbilical Humana , Humanos , Masculino , Metaloproteinases da Matriz/análise , Metaloproteinases da Matriz/metabolismo , Pessoa de Meia-Idade , Transdução de Sinais , Disco da Articulação Temporomandibular/metabolismo , Disco da Articulação Temporomandibular/patologia , Transtornos da Articulação Temporomandibular/patologia , Proteínas Quinases p38 Ativadas por Mitógeno/metabolismoRESUMO
Condylar hyperplasia (CH) of human temporomandibular joint (TMJ) often occurs unilaterally, and causes occlusal disturbance and facial asymmetry. The purpose of this study was to compare the effects of high condylectomy with and without postsurgical orthodontic treatment. Forty patients were diagnosed as having active CH and treated with high condylectomy. Patients in group A (n=24) took the postsurgical orthodontic therapy immediately after surgery, and those in group B (n=16) did not take orthodontic therapy. For both groups, the mandibular ramus height on the affected side was decreased significantly after surgery. Orthodontic treatment promoted maxillary alveolar remodeling significantly by depressing alveolar bone of the affected side and increasing alveolar bone of the nonaffected side. Better improvement for facial midline deviations was observed in group A than in group B. In both groups, the condylar remodeling was observed and manifested by the smoothening of condylar surface and returning of condyle to normal position in glenoid fossa. It was concluded that high condylectomy in the treatment of active CH of TMJ improved the functional occlusion and facial aesthetic. Postsurgical orthodontic therapy could more effectively enhance maxillary alveolar and condylar remodeling, and more rapidly and meticulously establish the stable occlusal and normal position of condyle than the spontaneous remodeling.
Assuntos
Côndilo Mandibular/cirurgia , Tomografia Computadorizada de Feixe Cônico , Feminino , Humanos , Masculino , Côndilo Mandibular/diagnóstico por imagem , Côndilo Mandibular/patologiaRESUMO
This paper presents a study on the mechanical properties of cement-stabilized steel-slag-based materials under freeze-thaw cycles for a highway project in Xinjiang. Using 3D scanning technology the specimen model conforming to the real steel slag shape was established. The objectives of the study are as follows: to explore the sensitivity between the macro- and micro-parameters of the specimen and to establish a non-linear regression equation; and to study the changes in mechanical properties of materials under freeze-thaw cycles, fatigue loading, and coupled freeze-thaw cycle-fatigue loading. The results show that there are three stages of compression damage of the specimen, namely, linear elasticity, peak plasticity, and post-peak decline. Maximum contact forces between cracks and particles occur mainly in the shear zone region within the specimen. The compression damage of the specimen is a mixed tensile-shear damage dominated by shear damage. When freeze-thaw cycles or fatigue loads are applied alone, the flexural strength and fatigue life of the specimens show a linear relationship of decline. The decrease in flexural modulus at low stress is divided into the following: a period of rapid decline, a relatively smooth period, and a period of fracture, with a tendency to change towards linear decay with increasing stress. In the case of freeze-thaw-fatigue coupling, the flexural modulus of the specimen decreases drastically by about 50% in the first 2 years, and then enters a period of steady decrease in flexural modulus in the 3rd-5th years.
RESUMO
To reduce the number of casualties in explosion accidents, blast-resistant shelters can be used to protect personnel in high-risk areas of petrochemical processing plants. In this work, the deformation behaviours of uncoated and polyurea-coated blast-resistant plates were studied through gas explosion tests. An ANSYS/LS-DYNA model of a polyurea-coated shelter was established, and the dynamic responses of the shelter under various explosion loads were analysed. A series of fuel-air explosion tests were carried out to investigate the explosion resistance of the full-scale shelter. The results showed that compared with the uncoated blast-resistant plate, the deformation of the polyurea-coated blast-resistant plate was significantly reduced. The overall deformation of the shelter was the central depression of the wall and the inward bending of the frame. The damage effect of a typical high-overpressure, low-duration load was greater than that of typical low-overpressure, long-duration load. The shelter remained intact under three repeated explosive loads, with cracks appearing on the inner wall but no collapse or debris splashing. The shock wave attenuation rate of the shelter reached over 90%, which could significantly reduce the number of indoor casualties.