Interrogation of 3d Transition Bimetallic Nanocrystal Nucleation and Growth Using In Situ Electron Microscope and Synchrotron X-ray Techniques.

Understanding the nucleation and growth mechanism of 3d transition bimetallic nanocrystals (NCs) is crucial to developing NCs with tailored nanostructures and properties. However, it remains a significant challenge due to the complexity of 3d bimetallic NCs formation and their sensitivity to oxygen. Here, by combining in situ electron microscopy and synchrotron X-ray techniques, we elucidate the nucleation and growth pathways of Fe-Ni NCs. Interestingly, the formation of Fe-Ni NCs emerges from the assimilation of Fe into Ni clusters together with the reduction of Fe-Ni oxides. Subsequently, these NCs undergo solid-state phase transitions, resulting in two distinct solid solutions, ultimately dominated by γ-Fe3Ni2. Furthermore, we deconvolve the interplays between local coordination and electronic state concerning the growth temperature. We directly visualize the oxidation-state distributions of Fe and Ni at the nanoscale and investigate their changes. This work may reshape and enhance the understanding of nucleation and growth in atomic crystallization.

Electronic Structure and Transformation of Dinitrosyl Iron Complexes (DNICs) Regulated by Redox Non-Innocent Imino-Substituted Phenoxide Ligand.

The coupled NO-vibrational peaks [IR νNO 1775 s, 1716 vs, 1668 vs cm-1 (THF)] between two adjacent [Fe(NO)2] groups implicate the electron delocalization nature of the singly O-phenoxide-bridged dinuclear dinitrosyliron complex (DNIC) [Fe(NO)2(µ-ON2Me)Fe(NO)2] (1). Electronic interplay between [Fe(NO)2] units and [ON2Me]- ligand in DNIC 1 rationalizes that "hard" O-phenoxide moiety polarizes iron center(s) of [Fe(NO)2] unit(s) to enforce a "constrained" π-conjugation system acting as an electron reservoir to bestow the spin-frustrated {Fe(NO)2}9-{Fe(NO)2}9-[·ON2Me]2- electron configuration (Stotal = 1/2). This system plays a crucial role in facilitating the ligand-based redox interconversion, working in harmony to control the storage and redox-triggered transport of the [Fe(NO)2]10 unit, while preserving the {Fe(NO)2}9 core in DNICs {Fe(NO)2}9-[·ON2Me]2- [K-18-crown-6-ether)][(ON2Me)Fe(NO)2] (2) and {Fe(NO)2}9-[·ON2Me] [(ON2Me)Fe(NO)2][PF6] (3). Electrochemical studies suggest that the redox interconversion among [{Fe(NO)2}9-[·ON2Me]2-] DNIC 3 ↔ [{Fe(NO)2}9-[ON2Me]-] ↔ [{Fe(NO)2}9-[·ON2Me]] DNIC 2 are kinetically feasible, corroborated by the redox shuttle between O-bridged dimerized [(µ-ONMe)2Fe2(NO)4] (4) and [K-18-crown-6-ether)][(ONMe)Fe(NO)2] (5). In parallel with this finding, the electronic structures of [{Fe(NO)2}9-{Fe(NO)2}9-[·ON2Me]2-] DNIC 1, [{Fe(NO)2}9-[·ON2Me]2-] DNIC 2, [{Fe(NO)2}9-[·ON2Me]] DNIC 3, [{Fe(NO)2}9-[ONMe]-]2 DNIC 4, and [{Fe(NO)2}9-[·ONMe]2-] DNIC 5 are evidenced by EPR, SQUID, and Fe K-edge pre-edge analyses, respectively.

High-Pressure Synthesis of Quadruple Perovskite Oxide CaCu3Cr2Re2O12 with a High Ferrimagnetic Curie Temperature.

An AA'3B2B'2O12-type quadruple perovskite oxide of CaCu3Cr2Re2O12 was synthesized at 18 GPa and 1373 K. Both an A- and B-site ordered quadruple perovskite crystal structure was observed, with the space group Pn-3. The valence states are verified to be CaCu32+Cr23+Re25+O12 by bond valence sum calculations and synchrotron X-ray absorption spectroscopy. The spin interaction among Cu2+, Cr3+, and Re5+ generates a ferrimagnetic transition with the Curie temperature (TC) at about 360 K. Moreover, electric transport properties and specific heat data suggest the presence of a half-metallic feature for this compound. The present study provides a promising quadruple perovskite oxide with above-room-temperature ferrimagnetism and possible half-metallic properties, which shows potential in the usage of spintronic devices.

Unveiling Highly Sensitive Active Site in Atomically Dispersed Gold Catalysts for Enhanced Ethanol Dehydrogenation.

Developing a desirable ethanol dehydrogenation process necessitates a highly efficient and selective catalyst with low cost. Herein, we show that the "complex active site" consisting of atomically dispersed Au atoms with the neighboring oxygen vacancies (Vo) and undercoordinated cation on oxide supports can be prepared and display unique catalytic properties for ethanol dehydrogenation. The "complex active site" Au-Vo-Zr3+ on Au1/ZrO2 exhibits the highest H2 production rate, with above 37,964 mol H2 per mol Au per hour (385 g H2 g-1 Au h-1) at 350 oC, which is 3.32, 2.94 and 15 times higher than Au1/CeO2, Au1/TiO2, and Au1/Al2O3, respectively. Combining experimental and theoretical studies, we demonstrate the structural sensitivity of these complex sites by assessing their selectivity and activity in ethanol dehydrogenation. Our study sheds new light on the design and development of cost-effective and highly efficient catalysts for ethanol dehydrogenation. Fundamentally, atomic-level catalyst design by colocalizing catalytically active metal atoms forming a structure-sensitive "complex site", is a crucial way to advance from heterogeneous catalysis to molecular catalysis. Our study advanced the understanding of the structure sensitivity of the active site in atomically dispersed catalysts.

Engineered Cobalt Single-Atoms@BiFeO3 Heteronanostructures for Highly Efficient Solar Water Oxidation.

Efficient charge-carrier separation and their utilization are the key factors in overcoming sluggish four-electron reaction kinetics involved in photocatalytic oxygen evolution. Here, a novel study demonstrates the significance of Na2 S2 O8 as a sacrificial agent in comparison to AgNO3 . Resultantly, BiFeO3 (BFO) and titanium doped-oxygen deficient BiFeO3 (Ti-BFO-R) nanostructures achieve ≈64 and 44.5 times higher O2 evolution in the presence of Na2 S2 O8 compared to AgNO3 as a sacrificial agent, respectively. Furthermore, the presence of Co single atoms (Co-SAs) deposited via immersion method on BFO and Ti-BFO-R nanostructures led to achieving outstanding O2 evolution at a rate of 16.11 and 23.89 mmol g-1 h-1 , respectively, which is 153 and 227.5 times higher compared to BFO (in the presence of AgNO3 ), the highest O2 evolution observed for BFO-based materials to date. The successful deposition of Co-SAs is confirmed by aberration-corrected high-angle annular dark-field scanning transmission electron microscopy (AC HAADF-STEM) and X-ray absorption near-edge structure (XANES). The charge transfer investigations confirm the significance of Co-SAs on BFO-based photocatalysts for improved charge-carrier separation, transport, and utilization. This novel study validates the excellent role of Na2 S2 O8 as a sacrificial agent and Co-SAs as a cocatalyst for BFO-based nanostructures for efficient O2 evolution.

Unveiled the Structure-Selectivity Relationship for Carbon Dioxide Reduction Triggered by Bi-Doped Cu-Based Nanocatalysts.

To investigate synergistic effect between geometric and electronic structures on directing CO2 RR selectivity, water phase synthetic protocol and surface architecture engineering strategy are developed to construct monodispersed Bi-doped Cu-based nanocatalysts. The strongly correlated catalytic directionality and Bi3+ dopant can be rationalized by the regulation of [*COOH]/[*CO] adsorption capacities through the appropriate doping of Bi3+ electronic modulator, resulting in volcano relationship between FECO /TOFCO and surface EVBM values. Spectroscopic study reveals that the dual-site binding mode ([Cu─µâ”€C(═O)O─Bi3+ ]) enabled by Cu1 Bi3+ 2 motif in single-phase Cu150 Bi1 nanocatalyst drives CO2-to-CO conversion. In contrast, the study of dynamic Bi speciation and phase transformation in dual-phase Cu50 Bi1 nanocatalyst unveils that the Bi0 -Bi0 contribution emerges at the expense of BOC phase, suggesting metallic Bi0 phase acting as [H]˙ formation center switches CO2 RR selectivity toward CO2-to-HCOO- conversion via [*OCHO] and [*OCHOK] intermediates. This work provides significant insight into how geometric architecture cooperates with electronic effect and catalytic motif/phase to guide the selectivity of electrocatalytic CO2 reduction through the distinct surface-bound intermediates and presents molecular-level understanding of catalytic mechanism for CO/HCOO- formation.

Structural and optical characterisation of silanised Dy-doped-Gd2O3 NPs.

In this work, we studied the optical properties of Dy-doped Gd2O3 nanoparticles (NPs) before and after their APTES functionalisation. We obtained luminescent Dy@Gd2O3 NPs (0.5, 1, and 5% mol) using a modified polyol method. Our work describes their detailed structural analysis using FT-IR, XRD, HRTEM, TGA and XAS techniques. The results show that these systems present a crystalline structure with a body-centred cubic cell and particle sizes of 10 nm. The dopant position was inferred as substitutional, through XAS analysis at the M4,5-edges of Gd and Dy and K-edge of O, and in C2 sites, based on photoluminescence studies. There was sensitization of the luminescence by the matrix as shown by the emission increase of the hypersensitive transition (6F9/2 → 6H13/2, 572 nm) and also a broadband appears around 510 nm attributed to defects in Gd2O3. An enhanced emissive lifetime of 398 µs was found for the sample doped at 1%. We functionalised the Dy@Gd2O3 (at 1%) NPs with 3-aminopropiltrietoxisilane (APTES) for further application as a biomarker sensor. We found that these NPs conserved their luminescence after adding the surface agent (avoiding quenching effects) making them potential materials for biosensing.

Efficient H2 Evolution Coupled with Anodic Oxidation of Iodide over Defective Carbon-Supported Single-Atom Mo-N4 Electrocatalyst.

We successfully prepared nitrogen-doped defective carbon spheres (Mo-N4/d-C) with a high loading of 0.996 wt % via a designed vapor-deposition process for IOR-based hydrogen generation. The synthesized Mo-N4/d-C catalyst provides a record current density of 10 mA cm-2 at 0.77 V. Further, the Mo-N4/d-C catalyst shows a Tafel slope of 25.58 mV dec-1, exceptional stability over time in acidic media, a higher hydrogen generation rate of 0.1063 mL gcat-1 min-1, a high Faradaic efficiency of 99.8%, and a reduction of the energy consumption up to ∼50% for hydrogen evolution by anodic oxidation reaction of iodide (IOR) compared with the conventional OER-based electrolysis. Computational calculations demonstrate that the Mo-N4/d-C structure plays a vital effect on the activity of iodide oxidation, which is competitive with the Pt catalyst.

Mixed-Valence CuI /CuIII Metal-Organic Frameworks with Non-innocent Ligand for Multielectron Transfer.

We report two novel three-dimensional copper-benzoquinoid metal-organic frameworks (MOFs), [Cu4 L3 ]n and [Cu4 L3 ⋅ Cu(iq)3 ]n (LH4 =1,4-dicyano-2,3,5,6-tetrahydroxybenzene, iq=isoquinoline). Spectroscopic techniques and computational studies reveal the unprecedented mixed valency in MOFs, formal Cu(I)/Cu(III). This is the first time that formally Cu(III) species are witnessed in metal-organic extended solids. The coordination between the mixed-valence metal and redox-non-innocent ligand L, which promotes through-bond charge transfer between Cu metal sites, allows better metal-ligand orbital overlap of the d-π conjugation, leading to strong long-range delocalization and semiconducting behavior. Our findings highlight the significance of the unique mixed valency between formal Cu(I) and highly-covalent Cu(III), non-innocent ligand, and pore environments of these bench stable Cu(III)-containing frameworks on multielectron transfer and electrochemical properties.

Visualizing the valence states of europium ions in Eu-doped BaAl2O4 using X-ray nanoprobe mapping.

This study develops and successfully demonstrates visualization methods for the characterization of europium (Eu)-doped BaAl2O4 phosphors using X-ray nanoprobe techniques. X-ray fluorescence (XRF) mapping not only gives information on the elemental distributions but also clearly reveals the valence state distributions of the Eu2+ and Eu3+ ions. The accuracy of the estimated valence state distributions was examined by performing X-ray absorption spectroscopy (XAS) across the Eu L3-edge (6.977 keV). The X-ray excited optical luminescence (XEOL) spectra exhibit different emission lines in the selected local areas. Their corresponding emission distributions can be obtained via XEOL mapping. The emission properties can be understood through correlation analysis. The results demonstrate that the main contribution to the luminescence intensity of the Eu-doped BaAl2O4 comes from the Eu2+ activator and the emission intensity will not be influenced by the concentration of Eu2+ or Eu3+ ions. It is anticipated that X-ray nanoprobes will open new avenues with significant characterization ability for unravelling the emission mechanisms of phosphor materials.

The role of transformation in the risks of chemically exfoliated molybdenum disulfide nanosheets to the aquatic environment.

While the effects of environmental factors (e.g., coexisting organic macromolecules and solar irradiation) on the phase transformation and oxidative dissolution of chemically exfoliated molybdenum nanosheets (ceMoS2) have been recognized, the effects of environmental processes on the subsequent biological impacts of ceMoS2 are still poorly understood. In this study, the bioavailability and transitions in chemical speciation occurring during the aging process are demonstrated to be key factors causing ceMoS2 to affect aquatic organisms. The lower survival rate of embryonic zebrafish with aged (i.e., sunlight-irradiated and dark-ambient-aged) ceMoS2, compared to that with freshly prepared ceMoS2, was due to the release of ionic aging products (mainly acidic Mo species) throughout the oxidative dissolution of ceMoS2. The released soluble molybdenum interacted with natural organic matter (NOM) depending on their functionality, and this attenuated the toxicity caused by ceMoS2 to different degrees. Toxicity triggered by aged ceMoS2 under both dark and irradiated conditions was significantly reduced by Suwannee River NOM due to the formation of complexes with ionic Mo species, which was established by Mo K-edge X-ray absorption spectroscopy. The findings provide useful insights for comprehending the impacts of ceMoS2 on aquatic organisms and guidance for the prevention measures necessary in the applications of MoS2 nanosheets.

Atomically Dispersed Janus Nickel Sites on Red Phosphorus for Photocatalytic Overall Water Splitting.

Single-atom nickel catalysts hold great promise for photocatalytic water splitting due to their plentiful active sites and cost-effectiveness. Herein, we adopt a reactive-group guided strategy to prepare atomically dispersed nickel catalysts on red phosphorus. The hydrothermal treatment of red phosphorus leads to the formation of P-H and P-OH groups, which behave as the reactive functionalities to generate the dual structure of single-atom P-Ni and P-O-Ni catalytic sites. The produced single-atom sites provide two different functions: P-Ni for water reduction and P-O-Ni for water oxidation. Benefitting from this specific Janus structure, Ni-red phosphorus shows an elevated hydrogen evolution rate compared to Ni nanoparticle-modified red phosphorus under visible-light irradiation. The hydrogen evolution rate was additionally enhanced with increased reaction temperature, reaching 91.51 µmol h-1 at 70 °C, corresponding to an apparent quantum efficiency of 8.9 % at 420 nm excitation wavelength.

Insights into the Mechanism of Methanol Steam Reforming Tandem Reaction over CeO2 Supported Single-Site Catalysts.

We demonstrated how the special synergy between a noble metal single site and neighboring oxygen vacancies provides an "ensemble reaction pool" for high hydrogen generation efficiency and carbon dioxide (CO2) selectivity of a tandem reaction: methanol steam reforming. Specifically, the hydrogen generation rate over single site Ru1/CeO2 catalyst is up to 9360 mol H2 per mol Ru per hour (579 mLH2 gRu-1 s-1) with 99.5% CO2 selectivity. Reaction mechanism study showed that the integration of metal single site and O vacancies facilitated the tandem reaction, which consisted of methanol dehydrogenation, water dissociation, and the subsequent water gas shift (WGS) reaction. In addition, the strength of CO adsorption and the reaction activation energy difference between methanol dehydrogenation and WGS reaction play an important role in determining the activity and CO2 selectivity. Our study paves the way for the further rational design of single site catalysts at the atomic scale. Furthermore, the development of such highly efficient and selective hydrogen evolution systems promises to deliver highly desirable economic and ecological benefits.

Trace Key Mechanistic Features of the Arsenite Sequestration Reaction with Nanoscale Zerovalent Iron.

Nanoscale zerovalent iron (nZVI) is considered as a highly efficient material for sequestrating arsenite, but the origin of its high efficacy as well as the chemical transformations of arsenite during reaction is not well understood. Here, we report an in situ X-ray absorption spectroscopy (XAS) study to investigate the complex mechanism of nZVI reaction with arsenite under anaerobic conditions at the time scale from seconds to days. The time-resolved XAS analysis revealed a gradual oxidation of AsIII to AsV in the course of minutes to hours in both the solid and liquid phase for the high (above 0.5 g/L) nZVI dose system. When the reaction time increased up to 60 days, AsV became the dominant species. The quick-scanning extended X-ray absorption fine structure (QEAXFS) was introduced to discover the transient intermediate at the highly reactive stage, and a small red-shift in As K-edge absorption edge was observed. The QEAXFS combined with density functional theory (DFT) calculation suggested that the red-shift is likely due to the electron donation in a Fe-O-As complex and possible active sites of As sequestrations include Fe(OH)4 and 4-Fe cluster. This is the first time that the transient reaction intermediate was identified in the As-nZVI sequestration system at the fast-reacting early stage. This study also demonstrated usefulness of in situ monitoring techniques in environmental water research.

The new X-ray absorption fine-structure beamline with sub-second time resolution at the Taiwan Photon Source.

The new TPS 44A beamline at the Taiwan Photon Source, located at the National Synchrotron Radiation Research Center, is presented. This beamline is equipped with a new quick-scanning monochromator (Q-Mono), which can provide both conventional step-by-step scans (s-scans) and on-the-fly scans (q-scans) for X-ray absorption fine-structure (XAFS) spectroscopy experiments, including X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine-structure (EXAFS) spectral measurements. Ti and Te K-edge XAFS spectra were used to demonstrate the capability of collecting spectra at the limits of the working energy range. The Ni and Cu K-edge XAFS spectra for a Cu-doped Pt/Ni nanocomposite were acquired to test the performance of the newly commissioned beamline. Pt L3- and Ru K-edge quick-scanning XAFS (QXAFS) spectra for standard Pt and Ru foils, respectively, revealed the stability of the q-scan technique. The results also demonstrated the beamline's ability to collect XAFS spectra on a sub-second timescale. Furthermore, a Zn(s)|Zn2+(aq)|Cu(s) system was tested to indicate that the states of the Zn electrode could be observed in real time for charging and discharging conditions using an in situ/operando setup combined with QXAFS measurements.

Insights into the Mechanism of n-Hexane Reforming over a Single-Site Platinum Catalyst.

We demonstrate that the single-site catalyst Pt1/CeO2 greatly enhances the selectivity of cyclization and aromatization in the n-hexane reforming reaction. Specifically, the selectivity of single-site Pt1/CeO2 toward both cyclization and aromatization is above 86% at 350 °C. The turnover frequency of Pt1/CeO2 is 58.8 h-1 at 400 °C, which is close to that of Pt cluster/CeO2 (61.4 h-1) and much higher than that of Pt nanoparticle/CeO2 with Pt sizes of 2.5 and 7 nm. On the basis of the catalytic results for methylcyclopentane reforming, the dehydrocyclization and further aromatization of n-hexane are attributed to the prominent adsorption of ring intermediate products on the single-site Pt1/CeO2 catalysts. On the other side, with the multiple Pt adjacent active sites, the cluster and nanoparticle Pt/CeO2 samples favor the C-C bond cracking reaction. Ultimately, this in-depth study unravels the principles of hydrocarbon activation with different Pt sizes and represents a key step toward the rational design of new heterogeneous catalysts.

Efficient Hydrogen Production from Methanol Using a Single-Site Pt1/CeO2 Catalyst.

Hydrogen is regarded as an attractive alternative energy carrier due to its high gravimetric energy density and only water production upon combustion. However, due to its low volumetric energy density, there are still some challenges in practical hydrogen storage and transportation. In the past decade, using chemical bonds of liquid organic molecules as hydrogen carriers to generate hydrogen in situ provided a feasible method to potentially solve this problem. Research efforts on liquid organic hydrogen carriers (LOHCs) seek practical carrier systems and advanced catalytic materials that have the potential to reduce costs, increase reaction rate, and provide a more efficient catalytic hydrogen generation/storage process. In this work, we used methanol as a hydrogen carrier to release hydrogen in situ with the single-site Pt1/CeO2 catalyst. Moreover, in this reaction, compared with traditional nanoparticle catalysts, the single site catalyst displays excellent hydrogen generation efficiency, 40 times higher than 2.5 nm Pt/CeO2 sample, and 800 times higher compared to 7.0 nm Pt/CeO2 sample. This in-depth study highlights the benefits of single-site catalysts and paves the way for further rational design of highly efficient catalysts for sustainable energy storage applications.

Visible light-induced electronic structure modulation of Nb- and Ta-doped α-Fe2O3 nanorods for effective photoelectrochemical water splitting.

The photoelectrochemical (PEC) water splitting activity of Nb and Ta-doped hematite (α-Fe2O3) nanorods was investigated with reference to electronic structures by in situ synchrotron x-ray absorption spectroscopy (XAS). Current density-potential measurements demonstrate that the PEC activity of α-Fe2O3 nanorods depends strongly on the species and concentrations of dopants. The doping of α-Fe2O3 nanorods with a low level of Nb or Ta can improve their electrical conductivity and thereby facilitate charge transport and reduced electron-hole recombination therein. The photoconversion effects of Nb and Ta-doped α-Fe2O3 by in situ XAS in the dark and under illumination revealed opposite evolutions of the spectral intensities of the Fe L-edge and Nb/Ta L-edge, indicating that charge transfer and a conduction pathway are involved in the photoconversion. Analytic in situ XAS results reveal that the α-Fe2O3 that is doped with a low level of Nb has a greater photoconversion efficiency than that doped with Ta because Nb sites are more active than Ta sites in α-Fe2O3. The correlation between PEC activity and the electronic structure of Nb/Ta-doped α-Fe2O3 is examined in detail using in situ XAS and helps to elucidate the mechanism of PEC water splitting in terms of the electronic structure.

Operando X-ray spectroscopic observations of modulations of local atomic and electronic structures of color switching smart film.

Smart windows, which change color in response to external stimuli, are extensively studied owing to their potential technological applications in sensors and their ability to reduce the energy consumed by buildings. Most related studies focus on the optical properties of smart color switching films that can control the transmission of light and that of heat independently. This study examines the vanadium pentoxide thin film as a model system of a color switchable window. A gasochromic thin film of V2O5 is fabricated using sol-gel spin coating. In operando soft X-ray absorption spectroscopy (XAS) at the V L-edge is used to determine the evolutions of the electronic and atomic structures of V2O5 thin film under gasochromic color switching. Analysis of the V K-edge with respect to crystalline structural symmetry and valence requires many reference samples, whereas the V L-edge, which involves V 3d orbitals of various symmetries, can provide information about the atomic/electronic structures without many reference samples. A new gas reaction in situ cell was developed to collect the total-electron-yield XAS. The total-electron-yield signal can provide more accurate information about atomic and electronic structures than can the fluorescence-yield signal, which typically exerts a saturation effect. Analytical results reveal that the gasochromic reaction changes the charge state and causes a local atomic structural deformation of the film. The suggestion has been made that in the reaction, the central vanadium atom within the octahedron moves closer to the basal plane such that the apical V-O bond becomes more symmetrical than the film before gasochromic coloration. Unlike the cell that is used for hard XAS, and for which only cation sites can be studied, this in situ gas cell enables the real-time studies of atomic/electronic structures at gas-solid interfaces from viewpoints of both cation and anion sites.

Atomic and electronic aspects of the coloration mechanism of gasochromic Pt/Mo-modified V2O5 smart films: an in situ X-ray spectroscopic study.

In this work, gasochromic pristine and Mo-modified V2O5 thin films were prepared by the sol-gel spin coating method. Both films exhibit excellent gasochromic coloration. Synchrotron grazing incidence X-ray diffraction reveals that the Mo-modified V2O5 thin film is more amorphous than the pristine V2O5 thin film. X-ray absorption spectroscopy (XAS) was utilized to elucidate the modifications of the local electronic and atomic structures that are caused by Mo. In situ soft-XAS and in situ hard-XAS were performed to monitor the effect of the adsorption of dihydrogen on the charge state of vanadium and local atomic rearrangement in the gasochromic thin films. The gasochromic V2O5 film has a significantly pyramid-like oxygen-coordinated environment. However, the Mo-modified film exhibits mixed pyramid- and octahedral-like structures. Analytic results indicate that upon gasochromic coloration, adsorption of hydrogen adds electrons to the V 3d t2g orbital, lowering the charge state of vanadium. The films undergo structural modification before the valence is changed. The Mo-modified V2O5 film exhibits faster coloration because the apical V-O bond differs from that in the pristine V2O5 film. This in situ XAS allows real-time monitoring of changes in the element-specific local atomic structure during the gasochromic reaction and enables the elucidation of the gasochromic mechanism.