Design of the Synergistic Rectifying Interfaces in Mott-Schottky Catalysts.

The functions of interfacial synergy in heterojunction catalysts are diverse and powerful, providing a route to solve many difficulties in energy conversion and organic synthesis. Among heterojunction-based catalysts, the Mott-Schottky catalysts composed of a metal-semiconductor heterojunction with predictable and designable interfacial synergy are rising stars of next-generation catalysts. We review the concept of Mott-Schottky catalysts and discuss their applications in various realms of catalysis. In particular, the design of a Mott-Schottky catalyst provides a feasible strategy to boost energy conversion and chemical synthesis processes, even allowing realization of novel catalytic functions such as enhanced redox activity, Lewis acid-base pairs, and electron donor-acceptor couples for dealing with the current problems in catalysis for energy conversion and storage. This review focuses on the synthesis, assembly, and characterization of Schottky heterojunctions for photocatalysis, electrocatalysis, and organic synthesis. The proposed design principles, including the importance of constructing stable and clean interfaces, tuning work function differences, and preparing exposable interfacial structures for designing electronic interfaces, will provide a reference for the development of all heterojunction-type catalysts, electrodes, energy conversion/storage devices, and even super absorbers, which are currently topics of interest in fields such as electrocatalysis, fuel cells, CO2 reduction, and wastewater treatment.

Boosting the Efficiency and Stability of Li-CO2 Batteries via a Ruthenium-Based Olefin-Metathesis Catalyst.

The practical application of Li-CO2 batteries is significantly hindered by high charge potential and short lifespan, mainly due to sluggish reaction kinetics and inadequate reaction reversibility. Homogeneous catalysts added to the electrolyte provide a promising strategy to address these issues. In this work, the third-generation Grubbs catalyst (G-III), which is efficient for olefin metathesis reactions, has been adopted as a homogeneous catalyst for Li-CO2 batteries. Batteries with G-III exhibited a low overpotential of 0.86 V and a lifespan of 1300 h at a current density of 300 mA g-1. Even at a high current density of 2000 mA g-1, the batteries remained stable for over 300 cycles, with an initial overpotential of 1.11 V. A two-step discharge/charge reaction involving Li2C2O4 as an intermediate was well illustrated, attributed to both low overpotentials and high specific capacity. These findings provide insights into catalyst selection and mechanism analysis for Li-CO2 batteries, offering practical strategies for Li-CO2 battery performance enhancement and practical applications.

Electron Divergence of Cuδ- and Pdδ+ in Cu3Pd Alloy-Based Heterojunctions Boosts Concerted C≡C Bond Binding and the Volmer Step for Alkynol Semihydrogenation.

Electrocatalytic semihydrogenation of alkynols presents a sustainable alternative to conventional thermal methodologies for the high-value production of alkenols. The design of efficient catalysts with superior catalytic and energy efficiency for semihydrogenation poses a significant challenge. Here, we present the application of an electron-divergent Cu3Pd alloy-based heterojunction in promoting the electrocatalytic semihydrogenation of alkynols to alkenols using water as the proton source. The tunable electron divergence of Cuδ- and Pdδ+, modulated by rectifying contact with nitrogen-rich carbons, enables the concerted binding of active H species from the Volmer step of water dissociation and the C≡C bond of alkynols on Pdδ+ sites. Simultaneously, the pronounced electron divergence of Cu3Pd facilitates the universal adsorption of OH species from the Volmer step and alkynols on the Cuδ- sites. The electron-divergent dual-center substantially boosts water dissociation and inhibition of completing hydrogen evolution to give a turnover frequency of 2412 h-1, outperforming the reported electrocatalysts' value of 7.3. Moreover, the continuous production of alkenols at industrial-related current density (-200 mA cm-2) over the efficient and durable Cu3Pd-based electrolyzer could achieve a cathodic energy efficiency of 45 mol kW·h-1, 1.7 times the bench-marked reactors, promising great potential for sustainable industrial synthesis.

Electrocatalytic Aromatic Alcohols Splitting to Aldehydes and H2 Gas.

Selective electrocatalytic transformation of alcohols to aldehydes offers an efficient and environmentally friendly platform for the simultaneous production of fine chemicals and pure hydrogen gas. However, traditional alcohol oxidation reactions (AORs) in aqueous electrolyte unavoidably face competitive reactions (e.g., water oxidation and overoxidations reactions) for the presence of active oxygen species from water oxidation, causing an unwanted decrease in final efficiency and selectivity. Here, we developed an integrated all-solid proton generator-transfer electrolyzer to trigger the pure alcohol splitting reaction (ASR). In this splitting process, only O-H and C-H bonds can be cleaved at the proton generator (Pt nanoparticles), thereby completely avoiding all competitive reactions involving oxygen active species to give a > 99% selectivity to aldehydes. The as-generated protons are transported to the cathode by a three-dimensional (3D) conducting network (assemblies of ionomers and carbon spheres) for efficient hydrogen production. Unlike the poor selectivity (<22%) and durability (<3 h) of a conventional AOR electrolyzer, this ASR electrolyzer could be continuously operated at a low cell voltage of 1.2 V for at least 10 days to give a high Faradaic efficiency of 80-93% for aldehyde production.

Organometallic Polymer Constructed by Active Fe-C12N8 Centers for Boosting Sodium-Ion Storage.

Organic-metal coordination materials with rich structural diversity are considered as promising electrode materials for rechargeable sodium-ion batteries. However, the electrochemical performance can be constrained by the limited number of active sites and structural instability under the discharge/charge process. Herein, organometallic polymer microspheres (Fe-PDA-220) with a unique d-π conjugated structure was designed and successfully constructed through a simple synchronous polymerization and coordination reactions. Polymerization of phenylenediamine was initiated by Fe3+ and Fe2+ ions generated synchronously during the polymerization integrated with poly-aminoquinone chains to form Fe-C12N8 active centers. Used as electrode materials for sodium-ion batteries, the distinctive Fe-C bond significantly boosts the structural stability, and the π-d conjugation system could facilitate electron transfer. A high reversible capacity of 345 mAh g-1 was delivered at 0.1 A g-1 and a capacity of 106 mAh g-1 was maintained even after discharged/charged at 1.0 A g-1 for 5000 cycles, outperforming most reported coordination materials. Spectroscopic and electronic analyses revealed that a two-electron reaction occurred per active unit, accompanied by the reversible redox evolution of the C=N groups and Fe ions during the sodiation/desodiation. This work provides a promising and efficient strategy for boosting the electrochemical performance of organic electrode materials by the design of organometallic polymers.

Boosting Propane Dehydrogenation to Propylene via Electron Hole-Hydrogen Coupling on Cobalt Metal Surface.

Nonoxidative dehydrogenation of propane is useful for the high selectivity to propylene but is suffering from the heavy coke deposition on the catalyst surface. Herein, we present a proof-of-concept application of a hole-hydrogen (H) couple on a metallic cobalt surface to decrease the deactivation rate. The coupled H atoms on the Co surface, partially resulting from propane dehydrogenation, enabled the desorption of propylene to avoid deep hydrogenolysis and coke deposition and realize selective and durable propylene production, while conventional Co metal-based catalysts do not generate propylene. The optimized hole-H coupled Co catalyst provided a low deactivation rate (0.0036 h-1) and a high turnover frequency (55.6 h-1) for propylene production with a high propane flux (48 vol.% C3H8 in gas feeds) at 550 °C.

Tailoring the Growth and Morphology of Lithium Peroxide: Nickel Sulfide/Nickel Phosphate Nanotubes with Optimized Electronic Structure for Lithium-Oxygen Batteries.

Heterogeneous crystalline-amorphous structures, with tunable electronic structures and morphology, hold immense promise as catalysts for lithium-oxygen batteries (LOBs). Herein, a nanotube network constructed by crystalline nickel sulfide/amorphous nickel phosphate (NiS/NiPO) heterostructure is prepared on Ni foam through the sulfurization of the precursor generated hydrothermally. Used as cathodes, the NiS/NiPO nanotubes with optimized electronic structure can induce the deposition of the highly porous and interconnected structure of Li2 O2 with rich Li2 O2 -electrolyte interfaces. Abundant active sites can be created on NiS/NiPO through the charge redistribution for the uniform nucleation and growth of Li2 O2 . Moreover, nanotube networks endow cathodes with efficient transport channels and sufficient space for the accommodation of Li2 O2 . A high discharge capacity of 27 003.6 mAh g-1 and a low charge overpotential of 0.58 V at 1000 mAh g-1 can be achieved at 200 mA g-1 . This work provides valuable insight into the unique role of the electronic structure and morphology of catalysts in the formation mechanisms of Li2 O2 and the performances of LOBs.

Boosting Mass Exchange between Pd/NC and MoC/NC Dual Junctions via Electron Exchange for Cascade CO2 Fixation.

Merging existing catalysts together as a cascade catalyst may achieve "one-pot" synthesis of complex but functional molecules by simplifying multistep reactions, which is the blueprint of sustainable chemistry with low pollutant emission and consumption of energy and materials only when the smooth mass exchange between different catalysts is ensured. Effective strategies to facilitate the mass exchange between different active centers, which may dominate the final activity of various cascade catalysts, have not been reached until now, even though charged interfaces due to work function driven electron exchange have been widely observed. Here, we successfully constructed mass (reactants and intermediates) exchange paths between Pd/N-doped carbon and MoC/N-doped carbon induced by interfacial electron exchange to trigger the mild and cascade methylation of amines using CO2 and H2. Theoretical and experimental results have demonstrated that the mass exchange between electron-rich MoC and electron-deficient Pd could prominently improve the production of N,N-dimethyl tertiary amine, which results in a remarkably high turnover frequency value under mild conditions, outperforming the state-of-the-art catalysts in the literature by a factor of 5.9.

Construction of Large Non-Localized π-Electron System for Enhanced Sodium-Ion Storage.

Organic electrode materials with the advantages of renewability, environment-friendliness, low cost, and high capacity have received widespread attention in recent years for sodium-ion batteries. However, small molecular organic materials suffer from issues such as low conductivity and the high dissolution rate in electrolytes. Herein, a phthalocyanine derivative (TPcDS) with a large non-localized π-electron system, obtained through thermodynamic polymerization of 4-aminophthalonitrile (AP) monomers, is designed to address these issues. According to the density function theory calculation, six sodium ions can be attracted by one polymer molecule, indicating a high theoretical capacity of 375 mA h g-1 . The TPcDS molecule realizes sodium storage through a non-localized π-electron system of phthalocyanine macrocycles. When employed as an anode material for sodium-ion batteries, the functional groups of phthalocyanine macrocycles, such as CN groups in TPcDS, experience obviously reversible structural variation upon discharge/charge. A high reversible capacity of 364 mAh g-1 is achieved at a current density of 0.05 A g-1 , and a charge capacity of as high as 246 mAh g-1 is still maintained after 500 cycles at 0.1 A g-1 . This work provides an effective strategy for the design and synthesis of new oligomeric organic electrode materials.

Facilitating Hot Electron Injection from Graphene to Semiconductor by Rectifying Contact for Vis-NIR-Driven H2 O2 Production.

Solar-driven production of hydrogen peroxide (H2 O2 ), as an important industrial chemical oxidant with an extensive range of applications, from oxygen reduction is a sustainable alternative to mainstream anthraquinone oxidation and direct hydrogenation of dioxygen methods. The efficiency of solar to hydrogen peroxide over semiconductor-based photocatalysts is still largely limited by the narrow light absorption to visible light. Here, the authors proposed and demonstrate the proof-of-concept application of light-generated hot electrons in a graphene/semiconductor (exemplified with widely used TiO2 ) dyad to largely extend visible light spectra up to 800 nm for efficient H2 O2 production. The well-designed graphene/semiconductor heterojunction has a rectifying interface with a zero barrier for the hot electron injection, largely boosting excited hot electrons with an average lifetime of ≈0.5 ps into charge carriers with a long fluorescent lifetime (4.0 ns) for subsequent H2 O2 production. The optimized dyadic photocatalyst can provide an H2 O2 yield of 0.67 mm g-1  h-1 under visible light irradiation (λ ≥ 400 nm), which is 20 times of the state-of-the-art noble-metal-free titanium oxide-based photocatalyst, and even achieves an H2 O2 yield of 0.14 mm g-1  h-1 upon photoexcitation by near-infrared-region light (≈800 nm).

Tunable Surface Electric Field of Electrocatalysts via Constructing Schottky Heterojunctions for Selective Conversion of Trash Ions to Treasures.

Surface electric field of catalyst is widely recognized as one of the key points to boost catalytic activity. However, there is still a lack of convenient ways to tune the surface electric field to selectively boost the catalytic conversions of different types of reactants in specific catalytic reactions. Here, we introduce a conceptually new method to tune the surface electric field of electrode materials by adjusting the number and density of heterojunctions inside. Both theoretical and experimental results prove that the well-designed surface electric field of an electrocatalyst plays a key role in facilitating pre-adsorption and/or activation of reactants for selective conversion of trash ions to useful products in hydrogen and oxygen evolution reactions as well as NOx - reduction reactions.

Novel design of cryptosystems for video/audio streaming via dynamic synchronized chaos-based random keys.

In this paper, a novel chaos-based cryptosystem is proposed to ensure the communication security of video/audio streaming in the network environment. Firstly, by the proposed synchronization controller for the master and slave chaotic systems, respectively, embedded in the transmitter and receiver, the cryptosystem can generate the synchronized and dynamic chaotic random numbers at the transmitter and receiver simultaneously. Then integrating the chaotic random numbers with SHA3-256 (Secure hash algorithm 3), the design of synchronized dynamic key generators (SDKGs) is completed. Continuously, we can apply the SDKGs to encrypt/decrypt streaming audio/video data. In our design, we introduce the AES CFB (Advanced encryption standard cipher feedback) encryption algorithm with SDKGs to encrypt the video/audio streaming. Then the cipher-text is transmitted to the receiver via the network public channel and it can be fully decrypted with the dynamic random keys synchronously generated at the receiver. A duplex audio/video cryptosystem is realized to illustrate the performance and feasibility of this proposed research. Finally, many tests and comparisons are performed to stress the quality of random sequences generated by proposed SDKGs.

Heteroatom-Embedded Approach to Vinylene-Linked Covalent Organic Frameworks with Isoelectronic Structures for Photoredox Catalysis.

Embedding heteroatoms into the main backbones of polymeric materials has become an efficient tool for tailoring their structures and improving their properties. However, owing to comparatively harsh heteroatom-doping conditions, this has rarely been explored in covalent organic frameworks (COFs). Herein, upon aldol condensation of a trimethyl-substituted pyrylium salt with a tritopic aromatic aldehyde, a two-dimensional oxonium-embedded COF with vinylene linkages was achieved, which was further converted to a neutral pyridine-cored COF by in situ replacement of oxonium ions with nitrogen atoms under ammonia treatment. The two heteroatom-embedded COFs are conceptually isoelectronic with each other, featuring similar geometric structures but different electronic structures, rendering them capable of catalyzing the visible-light-promoted multi-component synthesis of tri-substituted pyridine derivatives with good recyclability.

Direct Oxygen Transfer from H2 O to Cyclooctene over Electron-Rich RuO2 Nanocrystals for Epoxidation and Hydrogen Evolution.

Production of more than 20 million tons of epoxides per year from olefins suffers from low atom economy due to the use of oxidants and complex catalysts with unsatisfactory selectivity, leading to huge environmental and economic costs. We present a proof-of-concept application of electron-rich RuO2 nanocrystals to boost the highly selective epoxidation of cyclooctene via direct oxygen transfer from water as the sole oxygen source under mild conditions. The enhanced electron enrichment of RuO2 nanocrystals via the Schottky effect with nitrogen-doped carbons largely promotes the capture and activation of cyclooctene to give a high turnover frequency (260 h-1 ) of cyclooctene oxide, far surpassing the reported values (<20 h-1 ) of benchmarked catalysts at room temperature with oxidants. Our electron-rich RuO2 electrocatalysts enable efficient and durable hydrogen production (Faradaic efficiency >90 %) on the cathode without impacting on the selectivity to epoxide (>99 %) on the anode.

Oxygen Vacancy Engineering of Titania-Induced by Sr2+ Dopants for Visible-Light-Driven Hydrogen Evolution.

A Sr2+-doping strategy is developed to engineer rich oxygen vacancies in porous titania for boosting visible-light-driven photocatalytic activity. The incorporation of strontium, with a larger atom radius than titanium, leads to the release of a lattice oxygen atom in the titania, causing the generation of an oxygen vacancy. The optimal Sr2+-doped titania sample with rich oxygen vacancies achieves a photocatalytic hydrogen production rate as high as 1092 µmol h-1 g-1, which is 4 and 16 times higher than the unmodified titania with less oxygen vacancies and the bench-marked P25, respectively.

Transitions from a Kondo-like diamagnetic insulator into a modulated ferromagnetic metal in FeGa3-yGey.

One initial and essential question of magnetism is whether the magnetic properties of a material are governed by localized moments or itinerant electrons. Here, we expose the case for the weakly ferromagnetic system FeGa3-y Ge y , wherein these two opposite models are reconciled, such that the magnetic susceptibility is quantitatively explained by taking into account the effects of spin-spin correlation. With the electron doping introduced by Ge substitution, the diamagnetic insulating parent compound FeGa3 becomes a paramagnetic metal as early as at y=0.01, and turns into a weakly ferromagnetic metal around the quantum critical point y=0.15. Within the ferromagnetic regime of FeGa3-y Ge y , the magnetic properties are of a weakly itinerant ferromagnetic nature, located in the intermediate regime between the localized and the itinerant dominance. Our analysis implies a potential universality for all itinerant-electron ferromagnets.

Synthesis of Ionic Vinylene-Linked Covalent Organic Frameworks through Quaternization-Activated Knoevenagel Condensation.

We developed a simple approach to synthesizing ionic vinylene-linked two-dimensional covalent organic frameworks (COFs) through a quaternization-promoted Knoevenagel condensation at three aromatic methyl carbon atoms of N-ethyl-2,4,6-trimethylpyridinium halide with multitopic aromatic aldehyde derivatives. The resultant COFs exhibited a honeycomb-like structure with high crystallinity and surface areas as large as 1343 m2 g-1 . The regular shape-persistent nanochannels and the positively charged polymeric frameworks allowed the COFs to be uniformly composited with linear polyethylene oxide and lithium salt, displaying ionic conductivity as high as 2.72×10-3  S cm-1 .

Schottky Barrier-Induced Surface Electric Field Boosts Universal Reduction of NOx - in Water to Ammonia.

NOx - reduction acts a pivotal part in sustaining globally balanced nitrogen cycle and restoring ecological environment, ammonia (NH3 ) is an excellent energy carrier and the most valuable product among all the products of NOx - reduction reaction, the selectivity of which is far from satisfaction due to the intrinsic complexity of multiple-electron NOx - -to-NH3 process. Here, we utilize the Schottky barrier-induced surface electric field, by the construction of high density of electron-deficient Ni nanoparticles inside nitrogen-rich carbons, to facilitate the enrichment and fixation of all NOx - anions on the electrode surface, including NO3 - and NO2 - , and thus ensure the final selectivity to NH3 . Both theoretical and experimental results demonstrate that NOx - anions were continuously captured by the electrode with largely enhanced surface electric field, providing excellent Faradaic efficiency of 99 % from both electrocatalytic NO3 - and NO2 - reduction. Remarkably, the NH3 yield rate could reach the maximum of 25.1 mg h-1 cm-2 in electrocatalytic NO2 - reduction reaction, outperforming the maximum in the literature by a factor of 6.3 in neutral solution. With the universality of our electrocatalyst, all sorts of available electrolytes containing NOx - pollutants, including seawater or wastewater, could be directly used for ammonia production in potential through sustainable electrochemical technology.

Enhanced Electrochemical Performance of Aprotic Li-CO2 Batteries with a Ruthenium-Complex-Based Mobile Catalyst.

Li-CO2 batteries are regarded as next-generation high-energy-density electrochemical devices. However, the greatest challenge arises from the formation of the discharge product, Li2 CO3 , which would accumulate and deactivate heterogenous catalysts to cause huge polarization. Herein, Ru(bpy)3 Cl2 was employed as a solution-phase catalyst for Li-CO2 batteries and proved to be the most effective one screened so far. Spectroscopy and electrochemical analyses elucidate that the RuII center could interact with both CO2 and amorphous Li2 C2 O4 intermediate, thus promoting electroreduction process and delaying carbonate transformation. As a result, the charge potential is reduced to 3.86 V and over 60 discharge/charge cycles are achieved with a fixed capacity of 1000 mAh g-1 at a current density of 300 mA g-1 . Our work provides a new avenue to improve the electrochemical performance of Li-CO2 batteries with efficient mobile catalysts.

Heterojunction-Based Electron Donators to Stabilize and Activate Ultrafine Pt Nanoparticles for Efficient Hydrogen Atom Dissociation and Gas Evolution.

Platinum (Pt) is the most effective bench-marked catalyst for producing renewable and clean hydrogen energy by electrochemical water splitting. There is demand for high HER catalytic activity to achieve efficient utilization and minimize the loading of Pt in catalysts. In this work, we significantly boost the HER mass activity of Pt nanoparticles in Ptx /Co to 8.3 times higher than that of commercial Pt/C by using Co/NC heterojunctions as a heterogeneous version of electron donors. The highly coupled interfaces between Co/NC and Pt metal enrich the electron density of Pt nanoparticles to facilitate the adsorption of H+ , the dissociation of Pt-H bonds and H2 release, giving the lowest HER overpotential of 6.9 mV vs. RHE at 10 mA cm-2 in acid among reported HER electrocatalysts. Given the easy scale-up synthesis due to the stabilization of ultrafine Pt nanoparticles by Co/NC solid ligands, Ptx /Co can even be a promising substitute for commercial Pt/C for practical applications.