Enhancing Mechanical and Antimicrobial Properties of Dialdehyde Cellulose-Silver Nanoparticle Composites through Ammoniated Nanocellulose Modification.

Given the widespread prevalence of viruses, there is an escalating demand for antimicrobial composites. Although the composite of dialdehyde cellulose and silver nanoparticles (DAC@Ag1) exhibits excellent antibacterial properties, its weak mechanical characteristics hinder its practical applicability. To address this limitation, cellulose nanofibers (CNFs) were initially ammoniated to yield N-CNF, which was subsequently incorporated into DAC@Ag1 as an enhancer, forming DAC@Ag1/N-CNF. We systematically investigated the optimal amount of N-CNF and characterized the DAC@Ag1/N-CNF using FT-IR, XPS, and XRD analyses to evaluate its additional properties. Notably, the optimal mass ratio of N-CNF to DAC@Ag1 was found to be 5:5, resulting in a substantial enhancement in mechanical properties, with a 139.8% increase in tensile elongation and a 33.1% increase in strength, reaching 10% and 125.24 MPa, respectively, compared to DAC@Ag1 alone. Furthermore, the inhibition zones against Escherichia coli and Staphylococcus aureus were significantly expanded to 7.9 mm and 15.9 mm, respectively, surpassing those of DAC@Ag1 alone by 154.8% and 467.9%, indicating remarkable improvements in antimicrobial efficacy. Mechanism analysis highlighted synergistic effects from chemical covalent bonding and hydrogen bonding in the DAC@Ag1/N-CNF, enhancing the mechanical and antimicrobial properties significantly. The addition of N-CNF markedly augmented the properties of the composite film, thereby facilitating its broader application in the antimicrobial field.

Nanoparticulate MgH2 ameliorates anxiety/depression-like behaviors in a mouse model of multiple sclerosis by regulating microglial polarization and oxidative stress.

Multiple sclerosis (MS) is an autoimmune demyelinating disease of the central nervous system (CNS). Anxiety and depression are the most common psychiatric comorbidities of MS, which seriously affect patients' quality of life, treatment compliance, and prognosis. However, current treatments for anxiety and depression in MS show low therapeutic efficacy and significant side effects. In the present study, we explored the therapeutic effects of a novel low-toxic anti-inflammatory drug, nanoparticulate magnesium hydride (MgH2), on mood disorders of MS. We observed that anxiety/depression-like behaviors in experimental autoimmune encephalomyelitis (EAE) mice were alleviated by MgH2 treatment. In addition, disease severity and inflammatory demyelination were also diminished. Furthermore, we confirmed the suppressive effect of MgH2 on depression in the acute restraint stress model. Mechanistically, MgH2 may play a therapeutic role by promoting microglial M2 polarization, inhibiting microglial M1 polarization, and reducing oxidative stress and mitochondrial damage. Therefore, nanoparticulate MgH2 may be a promising therapeutic drug for psychiatric comorbidities of MS.

Sustainable and Scalable Synthesis of 2D Ultrathin Hierarchical Porous Carbon Nanosheets for High-Performance Supercapacitor.

2D carbon nanomaterials such as graphene, carbon nanosheets, and their derivatives, representing the emerging class of advanced multifunctional materials, have gained great research interest because of their extensive applications ranging from electrochemistry to catalysis. However, sustainable and scalable synthesis of 2D carbon nanosheets (CNs) with hierarchical architecture and irregular structure via a green and low-cost strategy remains a great challenge. Herein, prehydrolysis liquor (PHL), an industrial byproduct of the pulping industry, is first employed to synthesize CNs via a simple hydrothermal carbonization technique. After mild activation with NH4 Cl and FeCl3 , the as-prepared activated CNs (A-CN@NFe) display an ultrathin structure (≈3 nm) and a desirable specific surface area (1021 m2 g-1 ) with hierarchical porous structure, which enables it to be both electroactive materials and structural support materials in nanofibrillated cellulose/A-CN@NFe/polypyrrole (NCP) nanocomposite, and thus endowing nanocomposite with impressive capacitance properties of 2546.3 mF cm-2 at 1 mA cm-2 . Furthermore, the resultant all-solid-state symmetric supercapacitor delivers a satisfactory energy storage ability of 90.1 µWh cm-2 at 250.0 µW cm-2 . Thus, this work not only opens a new window for sustainable and scalable synthesis of CNs, but also offers a double profits strategy for energy storage and biorefinery industry.

Identification and characterization of sex-dependent gene expression profile in glioblastoma.

Glioblastoma (GBM) is the most lethal primary tumor in the human brain and lacks favorable treatment options. Sex differences in the outcome of GBM are broadly acknowledged, but the underlying molecular mechanisms remain largely unknown. To identify the sex-dependent critical genes in the progression of GBM, raw data from several microarray datasets with the same array platform were downloaded from the Gene Expression Omnibus (GEO) database. These datasets included tumorous and normal tissue from patients with GBM and crucial sex features. Then, the differentially expressed genes (DEGs) in female and male tumors were identified via bioinformatics analysis, respectively. Functional signatures of the identified DEGs were further annotated by Gene Ontology (GO) and pathway enrichment analyses. Venn diagram and functional protein-protein interaction (PPI) network analyses were performed to screen out the sex-specific DEGs. Survival analysis of patients with differences in the expression level of selected genes was then carried out using the data from The Cancer Genome Atlas (TCGA). Here, we showed that ECT2, AURKA, TYMS, CDK1, NCAPH, CENPU, OIP5, KIF14, ASPM, FBXO5, SGOL2, CASC5, SHCBP1, FN1, LOX, IGFBP3, CSPG4, and CD44 were enriched in female tumor samples, whereas TNFSF13B, CXCL10, CXCL8, CXCR4, TLR2, CCL2, and FCGR2A were enriched in male tumor samples. Among these key genes, interestingly, ECT2 was associated with increased an survival rate for female patients, whileTNFSF13B could be regarded as a potential marker of poor prognosis in male patients. These results suggested that sex differences in patients may be attributed to the heterogeneous gene activity, which might influence the oncogenesis and the outcomes of GBM.

Regulatory Mechanism of Opposite Charges on Chiral Self-Assembly of Cellulose Nanocrystals.

The charge plays an important role in cellulose nanocrystal (CNC) self-assembly to form liquid crystal structures, which has rarely been systematically explored. In this work, a novel technique combining atomic force microscopy force and atomistic molecular dynamics simulations was addressed for the first time to systematically investigate the differences in the CNC self-assembly caused by external positive and negative charges at the microscopic level, wherein sodium polyacrylate (PAAS) and chitosan oligosaccharides (COS) were used as external positive and negative charge additives, respectively. The results show that although the two additives both make the color of CNC films shift blue and eventually disappear, their regulatory mechanisms are, respectively, related to the extrusion of CNC particles by PAAS and the reduction in CNC surface charge by COS. The two effects both decreased the spacing between CNC particles and further increased the cross angle of CNC stacking arrangement, which finally led to the color variations. Moreover, the disappearance of color was proved to be due to the kinetic arrest of CNC suspensions before forming chiral nematic structure with the addition of PAAS and COS. This work provides an updated theoretical basis for the detailed disclosure of the CNC self-assembly mechanism.

Switchable Circularly Polarized Signals with High Asymmetric Factor Triggered by Dual Photonic Bandgap Structure.

Currently, the smart photonic materials that can switch circularly polarized signals in real-time have attracted extensive attention due to numerous potential applications in information storage and photonics displays. However, the dynamically reversible switching of circularly polarized signals requires precise structural reconfiguration, which is rarely achieved in traditional biomaterials. Herein, a dual photonic bandgap (PBG) structure is constructed based on the optical propagation principle of cellulose-based photonic crystals, enabling the flexible switching of the intensity, wavelength, and direction of circularly polarized luminescence (CPL). By adjusting the fluorescence intensity and the matching degree of chiral structure, the asymmetric factor value of dual PBG structure is up to -1.47, far exceeding other cellulose-based materials. Importantly, it is demonstrated that dual CPL emission can be efficiently induced by two different PBGs, opening a new approach for on-demand switching of single and dual CPL emission. In addition, the dual PBG structure exhibits dual circularly polarized reflected signals under the circular polarizer, which perfectly embodies the applicability of multiple encryptions in QR codes. This work provides new insights into the real-time manipulation of circularly polarized signals by chiral photonic materials.

Chiral Photonic Liquid Crystal Films Derived from Cellulose Nanocrystals.

As a nanoscale renewable resource derived from lignocellulosic materials, cellulose nanocrystals (CNCs) have the features of high purity, high crystallinity, high aspect ratio, high Young's modulus, and large specific surface area. The most interesting trait is that they can form the entire films with bright structural colors through the evaporation-induced self-assembly (EISA) process under certain conditions. Structural color originates from micro-nano structure of CNCs matrixes via the interaction of nanoparticles with light, rather than the absorption and reflection of light from the pigment. CNCs are the new generation of photonic liquid crystal materials of choice due to their simple and convenient preparation processes, environmentally friendly fabrication approaches, and intrinsic chiral nematic structure. Therefore, understanding the forming mechanism of CNCs in nanoarchitectonics is crucial to multiple fields of physics, chemistry, materials science, and engineering application. Herein, a timely summary of the chiral photonic liquid crystal films derived from CNCs is systematically presented. The relationship of CNC, structural color, chiral nematic structure, film performance, and applications of chiral photonic liquid crystal films is discussed. The review article also summarizes the most recent achievements in the field of CNCs-based photonic functional materials along with the faced challenges.

[Homogeneous spinal-shortening axial decompression procedure for tethered cord syndrome].

OBJECTIVE: Surgical detethering is a traditional treatment for symptomatic tethered cord syndrome. However, such complications as cerebrospinal fluid leakage and neurologic deterioration are common. Homogeneous spinal-shortening axial decompression (HSAD) is a modified procedure of monosegmental spinal-shortening osteotomy and it is a novel surgical alternative of reducing neural tension indirectly. The objective was to evaluate the surgical outcomes of HSAD for tethered cord syndrome. METHODS: The surgical outcomes were examined for 15 consecutive patients with tethered cord syndrome undergoing HSAD from April 2010 to July 2014. Improvements of neurological symptoms including urinary dysfunction, lower-extremity motor and sensory disturbances and/or gait abnormalities, low-back and/or lower-extremity pain, bowel incontinence and sexual dysfunction were evaluated. RESULTS: Their average follow-up period was 21.5 months. The length of spinal column shortening was 17.2 ± 2.9 mm. Urinary dysfunction (n = 9) was the most common residual deficit. All 9 patients with urological symptoms reported improvements, although deficits persisted at the last follow-up. All patients with lower-extremity motor dysfunction improved and 4 (50.0%) noted complete resolution of preoperative lower-extremity sensory symptoms. All patients reported immediate low-back or lower-extremity pain relief after HSAD. One patient reported improved sexual functioning and regained complete erectile capabilities. Two patients (11%) experienced less satisfactory symptomatic or functional benefit from HSAD. However, the main objective of surgery was to prevent further worsening of neurological status. Complete bone union at osteotomy site was noted in all cases at the last follow-up. CONCLUSION: As a novel surgical option for tethered cord syndrome, HSAD may avoid such complications as cerebrospinal fluid leakage or neurologic deterioration commonly encountered during traditional detethering surgery. All patients gain satisfactory functional outcomes without complications compared to their preoperative symptoms.

Extraction of Ampelopsis japonica polysaccharides using p-toluenesulfonic acid assisted n-butanol three-phase partitioning: Physicochemical, rheological characterization and antioxidant activity.

Polysaccharides as the biopolymers are showing various structural and modulatory functions. Effective separation of carbohydrate structures is essential to understanding their function. In this study, we choose an efficient organic acid in combination with recyclable organic solvent three-phase partitioning technology for the simultaneous extraction of polysaccharides from Ampelopsis japonica (AJPs) to ensure the integrity of linear and branched polysaccharide. The monosaccharide composition, glycosidic linkage information, structural and physicochemical analyses and associations with antioxidant activities were extensively analyzed. Synergistic extraction was compared with the conventional hot water extraction method and the results showed that AJPs-HNP exhibited better elastic properties and excellent antioxidant activity. Correlation analysis confirmed that the antioxidant activity of AJPs was significantly correlated with relative molecular weight, uronic acid content and terminal glycoside linkage molar ratios. The collaborative processing has significantly improved the utilization potential of AJPs and provides a sound theoretical foundation for the effective extraction and separation of polysaccharides. Overall, this work provides systematic and comprehensive scientific information on the physicochemical, rheological and antioxidant properties of AJPs, revealing their potential as natural antioxidants in the functional food and pharmaceutical industries.

Development of high-barrier composite films for sustainable reduction of non-biodegradable materials in food packaging application.

Widely employed petroleum-based food packaging materials have inflicted irreparable harm on ecosystems, primarily stemming from their non-biodegradable attributes and recycling complexities. Inspired by natural nacre with a layered aragonite platelet/nanofiber/protein multi-structure, we prepared high-barrier composite films by self-assembly of cellulose nanofibrils (CNF), cellulose nanocrystals (CNC), montmorillonite (MMT), polyvinyl alcohol (PVA) and alkyl ketene dimer (AKD). The composite films demonstrated outstanding barrier properties with oxygen vapor transmission of 0.193 g·mm·m-2·day-1 and water vapor transmission rates of 0.062 cm3·mm·m-2·day-1·0.1 MPa-1, which were significantly lower than those of most biomass-degradable packaging materials. Additionally, the impacts of mixing nanocellulose with various aspect ratios on the tensile strength and folding cycles of the films were examined. The exceptional resistance of the composite films to oil and water provides a novel and sustainable approach to reduce non-biodegradable plastic packaging.

Water-soluble silver nanoclusters with multicolor fluorescence generated by dialdehyde nanofibrillated cellulose for biological imaging.

Water-soluble silver nanoclusters (AgNCs) as a new type of fluorescent material have attracted much attention for their remarkable optical properties and excellent cytocompatibility. However, it is still challenging to synthesize water-soluble AgNCs with good cytocompatibility and excellent fluorescence. Herein, the dialdehyde nanofibrillated cellulose (DANFC)- reduced water-soluble AgNCs capped by glutathione (GSH) with tunable fluorescence emissions were first reported. The DANFC provides a mild reduction environment and crystal growth system for the coordination between silver ions and GSH compared to conventional methods using strong reducing agents. The AgNCs with intense red fluorescence (R-AgNCs@GSH, size ∼2.24 nm) and green fluorescence (G-AgNCs@GSH, size ∼1.93 nm) were produced by varying the ratios of silver sources and ligands, and could maintain stable fluorescence intensity over 6 months. Moreover, the CCK-8 study demonstrated that the R-AgNCs@GSH and G-AgNCs@GSH reduced by DANFC of excellent cytocompatibility (cell viability >90 %) and enable precise multicolor intracellular imaging of Hela cells in 1 h. This work proposes a novel method to synthesize water-soluble AgNCs with tunable fluorescence emission at room temperature based on the classical silver- mirror reaction (SMR) using DANFC as reducing agent, and the synthesized fluorescent AgNCs have great potential as novel luminescent nanomaterials in biological research.

Acid-catalyzed phenolation of lignin with tea polyphenol: Enhancing uv resistance and oxidation resistance for potential applications.

The rapid development of the industry has led to the destruction of the earth's ozone layer, resulting in an increasingly serious problem of excessive ultraviolet radiation. Exploring effective measures to address these problems has become a hot topic. Lignin shows promise in the design and preparation of anti-ultraviolet products due to its inherent properties. However, it is important to investigate way to enhance the reactivity of lignin and determine its application form in related products. In this study, phenolic reactions with tea polyphenols were conducted through acid-catalyzed conversion, utilizing organic solvent lignin as the primary material. The phenolic hydroxyl content of the original lignin increased significantly by 218.8 %, resulting in notable improvements in UV resistance and oxidation resistance for phenolic lignin. Additionally, micro-nanocapsule emulsions were formed using phenolic lignin particles as surfactants through ultrasonic cavitation with small-molecule sunscreens. A bio-based sunscreen was prepared with phenolated lignin micro-nanocapsules as the active ingredient, achieving an SPF 100.2 and demonstrating excellent stability. The sunscreen also exhibited strong antioxidant properties and impermeability, ensuring user safety. This research offers a current solution for improving the application of lignin in sunscreens while also broadening the potential uses of plant-based materials in advanced functional products.

Ultra-strong, nonfreezing, and flexible strain sensors enabled by biomass-based hydrogels through triple dynamic bond design.

Biomass-based hydrogels have displayed excellent potential in flexible strain sensors due to their adequacy, biocompatibility, nontoxic and degradability. Nevertheless, their inferior mechanical properties, particularly at cryogenic temperatures, impeded their extensive utilization. Herein, we reported a rationally designed strain sensor fabricated from a gelatin and cellulose-derived hydrogel with superior mechanical robustness, cryogenic endurance, and flexibility, owing to a triple dynamic bond strategy (TDBS), namely the synergistic reinforcement among potent hydrogen bonds, imine bonds, and sodium bonds. Beyond conventional sacrificing bonds consisting of hydrogen bonds, dynamic covalent bonds and coordinate bonds, synergetic triple dynamic bonds dominated by strong hydrogen bonds and assisted by imine and sodium bonds with higher strength can dissipate more mechanical energy endowing the hydrogel with 38-fold enhancement in tensile strength (6.4 MPa) and 39-fold improvement in toughness (2.9 MPa). We further demonstrated that this hydrogel can work as a robust and biodegradable strain sensor exhibiting remarkable flexibility, broad detection range, considerable sensitivity and excellent sensing stability. Furthermore, owing to the improved nonfreezing performance achieved from incorporating sodium salts, the sensor delivered outstanding sensing properties under subzero conditions such as -20 and -4 °C. It is anticipated that the TDBS can create diverse high-performance soft-electronics for broad applications in human-machine interfaces, energy and healthcare.

Skin healthcare protection with antioxidant and anti-melanogenesis activity of polysaccharide purification from Bletilla striata.

In this study, we investigated the structural characterization and biological activities of Bletilla striata polysaccharides (BSPs) for their role as antioxidants and anti-melanogenesis agents in skin healthcare protection. Three neutral polysaccharides (BSP-1, BSP-2, and BSP-3) with molecular weights of 269.121 kDa, 57.389 kDa, and 28.153 kDa were extracted and purified. Their structural characteristics were analyzed by ion chromatography, GC-MS, and 1D/2D NMR. The results showed that BSP-1, which constitutes the major part of BSPs, was composed of α-D-Glcp, ß-D-Glcp, ß-D-Manp, and 2-O-acetyl-ß-D-Manp, with the branched-chain accompanied by ß-D-Galp and α-D-Glcp. BSP-1, BSP-2, and BSP-3 can enhance the total antioxidant capacity of skin fibroblasts with non-toxicity. Meanwhile, BSP-1, BSP-2, and BSP-3 could significantly inhibit the proliferative activity of melanoma cells. Among them, BSP-1 and BSP-2 showed more significance in anti-melanogenesis, tyrosinase inhibition activity, and cell migration inhibition. BSPs have effective antioxidant capacity and anti-melanogenesis effects, which should be further emphasized and developed as skin protection components.

Efficient one-pot synthesis of 5-chloromethylfurfural (CMF) from carbohydrates in mild biphasic systems.

5-Halomethylfurfurals can be considered as platform chemicals of high reactivity making them useful for the preparation of a variety of important compounds. In this study, a one-pot route for the conversion of carbohydrates into 5-chloromethylfurfural (CMF) in a simple and efficient (HCl-H3PO4/CHCl3) biphasic system has been investigated. Monosaccharides such as D-fructose, D-glucose and sorbose, disaccharides such as sucrose and cellobiose and polysaccharides such as cellulose were successfully converted into CMF in satisfactory yields under mild conditions. Our data shows that when using D-fructose the optimum yield of CMF was about 47%. This understanding allowed us to extent our work to biomaterials, such as wood powder and wood pulps with yields of CMF obtained being comparable to those seen with some of the enumerated mono and disaccharides. Overall, the proposed (HCl-H3PO4/CHCl3) optimized biphasic system provides a simple, mild, and cost-effective means to prepare CMF from renewable resources.

Multiphasic lignocellulose-based suspension for oil-water interfacial stabilization: Synergistic adsorption and phase behavior.

This study described the multiphasic and multi-sized lignocellulose-based suspension (LBS) prepared by green method and its adsorption and phase behavior at O/W interface. The LBS consisting of lignin containing microfibrils (LMFs), lignin containing cellulose nanofibers (LCNFs), and lignin nanoparticles (LNPs), was obtained by mechanical fibrillation and high-shear treatments. They had different functions in emulsion stabilization: (1) synergistic irreversible adsorption of LCNFs and LNPs limited the coalescence of droplets and formed micro-sized droplets; (2) droplets filled in the LMFs network creating a strong fiber-droplet network structure. The fluorescent micrographs confirmed the synergistic irreversible adsorption of LCNFs and LNPs on the surface of the droplets, which was conductive to the high interfacial stability. The droplets were deformed rather than being destroyed under the high flow speed. The increasing viscosity, improving gel-like behavior, decreasing creep compliance and increasing yield stress demonstrated that the internal droplets can support the fiber network to delay the destruction under shear force. And the fiber-droplet network can automatically regenerate in situ after completed destruction.

Current research and management of undifferentiated pleomorphic sarcoma/myofibrosarcoma.

Undifferentiated pleomorphic sarcoma (UPS), once termed as malignant fibrous histiocytoma, has always been diagnosed exclusively in clinical practice because it lacks any defined resemblance to normal mesenchymal tissue. Although myxofibrosarcoma (MFS) has been separated from UPS due to its fibroblastic differentiation with myxoid stroma, UPS and MFS are still identified as a sarcoma group in terms of molecular landscapes. In this review article, we will describe the associated genes and signaling pathways involved in the process of sarcoma genesis and make a summary of conventional management, targeted therapy, immunotherapy, and some novel potential treatments of UPS/MFS. With the progressive advancements in medical technology and a better understanding about the pathogenic mechanism of UPS/MFS in the coming decades, new lights will be shed on the successful management of UPS/MFS.

Multidimensional dynamic regulation of cellulose coloration for digital recognition and humidity response.

Structural color is an eye-catching phenomenon in nature, which originates from the synergistic effect of cholesteric structure inside living organisms and light. However, biomimetic design and green construction of dynamically tunable structural color materials have been a great challenge in the field of photonic manufacturing. In this work, the new ability of L-lactic acid (LLA) to multi-dimensionally modulate the cholesteric structures constructed from cellulose nanocrystals (CNC) is revealed for the first time. By studying the molecular-scale hydrogen bonding mechanism, a novel strategy that electrostatic repulsion and hydrogen bonding forces jointly drive the uniform arrangement of cholesteric structures is proposed. Due to the flexible tunability and uniform alignment of the CNC cholesteric structure, different encoded messages were developed in the CNC/LLA (CL) pattern. Under different viewing conditions, the recognition information of different digits will continue to reversibly and rapidly switch until the cholesteric structure is destroyed. In addition, the LLA molecules facilitated the more sensitive response of the CL film to the humidity environment, making it exhibit reversible and tunable structural colors under different humidity. These excellent properties provide more possibilities for the application of CL materials in the fields of multi-dimensional display, anti-counterfeiting encryption, and environmental monitoring.

Comparative study on the extraction efficiency, characterization, and bioactivities of Bletilla striata polysaccharides using response surface methodology (RSM) and genetic algorithm-artificial neural network (GA-ANN).

This research established the optimal conditions for alkali-assisted extraction (AAE) of bioactive polysaccharides from Bletilla striata integrated with response surface methodology (RSM) and the genetic algorithm-artificial neural networks (GA-ANN). In comparison with RSM, the ANN model showed a relatively higher determination coefficient in the global output values (RSM: ANN = 0.9270: 0.9742) performing more satisfactorily in the validation. Under the optimum conditions (52 °C; 167 min, and 0.01 mol/L NaOH), the extraction yields, IC50 of ABTS, and FRAP value were 29.53 ± 0.97 %, 3.41 mg/mL, and 39.11 µmol Fe2+/g, respectively. The results indicated that BSPs-A was mainly composed of glucose and mannose with small amounts of arabinose, galactose, and galacturonic acid, while possessed a molecular weight of about 305.94 kDa (Mw). The structural characterization of BSPs-A was initially characterized by FT-IR, SEM, and Congo red tests, which indicated that BSPs-A possessed a triple helix conformation of typical Bletilla striata polysaccharides. In addition, BSPs-A exhibited excellent antioxidant activity, which was further confirmed by a series of in vitro antioxidant activity assays including DPPH, ABTS, FRAP, and ORAC. After incubation in the BSA-glucose system for 15 days, BSPs-A showed inhibition of the advanced glycation end products (AGEs) formation for the first time.

Novel carboxylated cellulose nanocrystals synthesized by co-oxidation of sodium periodate/Fenton as a green solid emulsifier for oil-in-water Pickering emulsion.

The preparation of carboxylated cellulose nanocrystals (cCNCs) and their stabilization in oil-in-water (O/W) Pickering emulsions hold great potential for application and research value. In this work, a novel integrated oxidation strategy was proposed to prepare needle-like cCNCs by sodium periodate (NaIO4)/Fenton (SF-cCNCs) with considerable yield (58.58 %), plentiful carboxyl groups (1.28 mmol/g), and high crystallinity (83.3 %). The distinctive features of smaller size and high viscosity accelerated the as-prepared SF-cCNCs to be used in stabilizing Pickering emulsion. Moreover, the effects of oil-water ratio (OWR), SF-cCNCs content, pH, and sodium chloride (NaCl) content on the stability of SF-cCNCs-stabilized Pickering emulsions were also investigated systematically. Interestingly, the stability of the as-obtained emulsions was dependent on pH and salt. Afterwards, the rheological behaviors validated that the emulsion viscosity increased rapidly after adding NaCl, which was dominated by the elastic behavior. Finally, the main stabilization mechanism was confirmed to be interfacial adsorption of SF-cCNCs rather than the formation of spatial network structures between droplets. This study reports a synthetic strategy to efficiently prepare SF-cCNCs, endowing the SF-cCNCs stabilized Pickering emulsion with environmentally friendly, long-term stable and highly anti-agglomeration abilities for cosmetics and food products.