Preparation of D-histidine modified zeolitic imidazolate framework-90 coated capillary column and its application in open-tube capillary electrochromatography enantioseparation.

Metal-organic framework materials are a class of novel crystalline porous materials with regular pore structures formed by covalent bonding between metal centers and organic functional groups. Metal-organic framework materials have attracted great interest in analytical chemistry due to their unique properties such as good stability and permanent porosity. In this work, D-histidine was used to carry out chiral modification of zeolitic imidazolate framework-90 under mild conditions, and the D-histidine modified zeolitic imidazolate framework-90 coated capillary column was prepared. This chiral capillary column was used to separate epinephrine, norepinephrine, terbutaline, and tryptophan enantiomers. Under optimum conditions, baseline separations were achieved. The intra-day, inter-day, and inter-column relative standard deviations (n = 3) of the four pairs of enantiomeric migration times were 0.15%-0.56%, 0.74%-2.40%, and 1.93%-3.18%, respectively. Moreover, the D-histidine modified zeolitic imidazolate framework-90 coated capillary could be reused for at least 150 runs without significant changes in the separation efficiency and migration time.

RE(OH)2NO3 (RE = Tb, Dy, Ho, and Er): Synthesis and Nonlinear Optical Properties of Water-Resistant Lanthanide Hydroxide Nitrates.

A series of lanthanide-containing water-resistant nitrates, namely RE(OH)2NO3 (RE = Tb(1), Dy(2), Ho(3), and Er(4)), was obtained through the hydrothermal process. As possible nonlinear optical materials, they feature a layered isomorph composed of an [REO3(OH)6] polyhedron and an [NO3] triangle, and the synergistic arrangement of the [REO3(OH)6] and [NO3] groups in their structures leads to their obvious second-order nonlinear optical effect. Nevertheless, the unique optical absorption caused by the electronic transitions on 4f-4f orbitals of lanthanides results in their second harmonic generation responses of different strengths, with 1 exhibiting 5.07 times that of KDP, but 2-4 showing less than half of KDP. In addition, 1 possesses an outstanding water-resistant capacity and a transparent cut-off edge around 300 nm, foreshadowing its potential value as a nonlinear optical crystal. Moreover, 1 is found to emit characteristic green fluorescence due to the typical 5D4 → 7F5 transitions of the excited Tb3+ ions.

Generation of 3'-OH terminal-triggered encoding of multicolor fluorescence for simultaneous detection of different DNA glycosylases.

Uracil DNA glycosylase (UDG) and human alkyladenine DNA glycosylase (hAAG) are the important DNA glycosylases for initiating the repair of DNA damage, and the aberrant expression of DNA glycosylases is closely associated with various diseases, such as Parkinson's disease, several cancers, and human immunodeficiency. The simultaneous detection of UDG and hAAG is helpful for the study of early clinical diagnosis. However, the reported methods for multiple DNA glycosylase assay suffer from the application of an expensive single-molecule instrument, labor-tedious magnetic separation, and complicated design. Herein, we develop a simple fluorescence method with only three necessary DNA strands for the selective and sensitive detection of multiple DNA glycosylase activity based on the generation of 3'-OH terminal-triggered encoding of multicolor fluorescence. The method can achieve the detection limits of 5.5 × 10-5 U/mL for UDG and 3.3 × 10-3 U/mL for hAAG, which are lower than those of the reported fluorescence methods. Moreover, it can be further used to detect multiple DNA glycosylases in the human cervical carcinoma cell line (HeLa cells), normal human renal epithelial cells (293 T cells), and biological fluid and measure the enzyme kinetic parameters of UDG and hAAG.

The Subtle Structure Modulation of A2 -A1 -D-A1 -A2 Type Nonfullerene Acceptors Extends the Photoelectric Response for High-Voltage Organic Photovoltaic Cells.

Molecular structural modifications are utilized to improve the short-circuit current (JSC ) of high-voltage organic photovoltaics (OPVs). Herein, the classic non-fullerene acceptor (NFA), BTA3, is chosen as a benchmark, with BTA3b containing the linear alkyl chains on the middle core and JC14 fusing thiophene on the benzotriazole (BTA) unit as a contrast. The photovoltaic devices based on J52-F: BTA3b and J52-F: JC14 achieve wider external quantum efficiency responses with band edges of 730 and 800 nm, respectively than that of the device based on J52-F: BTA3 (715 nm). The corresponding  JSC increases to 14.08 and 15.78 mA cm-2 , respectively, compared to BTA3 (11.56 mA cm-2 ). The smaller Urbach energy and higher electroluminescence efficiency guarantee J52-F: JC14 a decreased energy loss (0.528 eV) and a high open-circuit voltage (VOC ) of 1.07 V. Finally, J52-F: JC14 combination achieves an increased power conversion efficiency (PCE) of 10.33% than that of J52-F: BTA3b (PCE = 9.81%) and J52-F: BTA3 (PCE = 9.04%). Overall, the research results indicate that subtle structure modification of NFAs, especially introducing fused rings, is a simple and effective strategy to extend the photoelectric response, boosting the  JSC and ensuring a high VOC beyond 1.0 V.

Synthesis of Silicon Nanoparticles Emitting Yellow-Green Fluorescence for Visualization of pH Change and Determination of Intracellular pH of Living Cells.

In order to understand related pathogenesis of some diseases and design new intracellular drug delivery systems, investigation of pH change in living cells in real time is important. In this paper, a new style of fluorescent silicon nanoparticles (SiNPs) as a pH-sensitive probe and for the visualization of the pH changes in cells was designed and prepared using 4-aminophenol as a reducing agent and N-aminoethyl-γ-aminopropyltrimethyl as a silicon source by a one-pot hydrothermal method. It was particularly noteworthy that the fluorescence intensity emitted from the SiNPs positively correlated with the pH value of solutions, making the SiNPs a viable probe used for sensitive sensing of pH. At the same time, a response of the probe to the pH was found in 5.0-10.0, and the SiNPs have an excellent biocompatibility (e.g., ∼74% of cell viability was remained after treatment for 24 h at 500 µg/mL of the SiNPs). The proposed method that could display the change in pH of live cells provided an effective means for visually diagnosing diseases related to intracellular pH.

In situ fabrication of 3D COF-300 in a capillary for separation of aromatic compounds by open-tubular capillary electrochromatography.

Two-dimensional (2D) COFs have been successfully applied for various applications, such as capillary electrochromatography (CEC). Compared with 2D COFs, three-dimensional (3D) COFs have higher surface area and lower density, which should have superior potential as the separation medium in CEC. However, the 3D COFs on the inner wall of capillary is hard to fabricate in situ. Up to date, the application of 3D COFs in open-tubular capillary electrochromatography (OT-CEC) is still considered a challenge. For the first time the COF-300-coated capillary was prepared by in situ growth (COF-300 was made from terephthalaldehyde and tetra-(4-anilyl)-methane) on OT-CEC. Benzene, methylbenzene, styrene, ethylbenzene, naphthalene, 1-methylnaphthalene, and propylbenzene were used to evaluate the performance of the COF-300-coated capillary by OT-CEC. For three consecutive runs, the intraday relative standard deviations (RSDs) of migration time and peak areas were 0.1-0.4% and 2.5-8.3%, respectively. The interday RSDs of migration time and peak areas were 0.2-0.5% and 1.0-10.8%, respectively. Five groups of aromatic co mpounds were used to further study the separation mechanism, which indicated that hydrophobic interaction and size selection interaction are the main factors. It should be noted that the COF-300-coated capillary can be used for more than 140 runs with no observable changes of the separation efficiency. Graphical abstract The 3D COF-300-coated capillary was prepared by in situ growth for OT-CEC. Six groups of aromatic compounds were separated by 3D COF-300-coated capillary. Size selection and hydrophobic interaction affect the migration time of analytes.

Carbon Dots as Fluorescent/Colorimetric Probes for Real-Time Detection of Hypochlorite and Ascorbic Acid in Cells and Body Fluid.

Hypochlorite (ClO-) and ascorbic acid (AA) are reported to have a high correlation with oxidative stress and related diseases, so it is necessary and critical to develop sensitive and fast response sensors to investigate the dynamical variation of these redox substances, especially those sensors which can detect ClO- and AA in real time in two manners. However, it is still an unmet challenge for now. Herein, novel carbon dots (RD-CDs) which can respond to ClO- and AA rapidly, reversibly, and dynamically by fluorescence and colorimetry were synthesized. In the fluorescence manner, the constructed nanosensor possessed high selectivity toward ClO- in the range of 0.1-100 µM with a detection limit of 83 nM, and can be selectively recovered by AA. It endows this sensor with good capacity as a fluorescent probe for dynamic detection of ClO- and AA in living cells, which can be monitored by a fluorescence microscope. In the colorimetric manner, ClO- and AA can be detected by UV-vis in the range of 5-200 µM and 1-30 µM, respectively. The concentrations of ClO- and AA in humor can be measured by RD-CDs in both fluorescence and colorimetric mode. The results above-mentioned demonstrate its great potential in biosensing.

CD36 deficiency attenuates immune-mediated hepatitis in mice by modulating the proapoptotic effects of CXC chemokine ligand 10.

The scavenger receptor CD36 recognizes a diverse set of ligands and has been implicated in a wide variety of normal and pathological processes, including lipid metabolism, angiogenesis, atherosclerosis, and phagocytosis. In particular, recent findings have demonstrated its crucial functions in sterile inflammation and tumor metastasis. However, the role of CD36 in immune-mediated hepatitis remains unclear. Concanavalin A (ConA)-induced liver injury is a well-established experimental T cell-mediated hepatitis. To understand the role of CD36 in hepatitis, we tested the susceptibility of CD36-deficient (CD36-/- ) mice to this model, evaluated by a liver enzyme test, terminal deoxynucleotidyl transferase dUTP nick-end labeling (TUNEL) assay, histological analysis, mononuclear cell (MNC) infiltration, and hepatic proinflammatory factor production. CD36-/- mice were less sensitive to ConA-induced hepatitis and had a significantly lower number of liver MNCs (LMNCs), including CD4+ cells, CD8+ T cells, natural killer cells, natural killer T cells, infiltrating macrophages, and neutrophils, as well as reduced expression of inflammatory mediators (tumor necrosis factor α, CXC chemokine ligand (CXCL) 10, interleukin (IL)-1α, monocyte chemotactic protein 1, and IL-6) compared with controls. Notably, we used bone marrow chimeric mice to demonstrate that CD36 expression on nonhematopoietic cells was required to drive ConA-induced liver injury. Furthermore, our data show that the CD36 receptor was essential for CXCL10-induced hepatocyte apoptosis and activation of IκB kinase, Akt, and Jun N-terminal kinase. Moreover, treatment of wild-type mice with genistein, a tyrosine kinase inhibitor that blocks CD36-Lyn signaling, attenuated ConA-induced liver injury and reduced the number of MNCs. CONCLUSIONS: Our findings suggest that CD36 plays an important proinflammatory role in ConA-induced liver injury by promoting hepatic inflammation and mediating the proapoptotic effect of chemokine CXCL10, and therefore, may be a potential therapeutic target for immune-mediated hepatitis. (Hepatology 2018;67:1943-1955).

Characterization of the Ligand Exchange Reactions on CdSe/ZnS QDs by Capillary Electrophoresis.

The continuous development of semiconductor quantum dots (QDs) in biochemical research has attracted special attention, and surface functionalizing becomes more important to optimize their performance. Ligand exchange reactions are commonly used to modify the surface of QDs for their biomedical applications. However, the kinetics of ligand exchange for semiconductor QDs remain fully unexplored. Here, we describe a simple and rapid method to characterize the ligand exchange reactions on CdSe/ZnS QDs by capillary electrophoresis (CE). The results of ultraviolet-visible absorption spectra, fluorescence spectra, and Fourier transform infrared spectroscopy indicated the successful implementation of the ligand exchange process. The dynamics of ligand exchange of OA-coated CdSe/ZnS QDs with 4-mercaptobenzoic acid was monitored by CE, and the observed ligand exchange trends were fitted with logistic functions. When the ligand exchange reactions reached equilibrium, the ligand density of QDs can be quantified by CE. It is anticipated that CE will be a new powerful technique for quantitative analysis of the ligand exchange reactions on the surface of QDs.

Base excision repair mediated cascading triple-signal amplification for the sensitive detection of human alkyladenine DNA glycosylase.

DNA glycosylase (DG) plays a significant role in repairing DNA lesions, and the dysregulation of DG activity is associated with a variety of human pathologies. Thus, the detection of DG activity is essential for biomedical research and clinical diagnosis. Herein, we develop a facile fluorometric method based on the base excision repair (BER) mediated cascading triple-signal amplification for the sensitive detection of DG. The presence of human alkyladenine DNA glycosylase (hAAG) can initiate the cleavage of the substrate at the mismatched deoxyinosine site by endonuclease IV (Endo IV), resulting in the breaking of the DNA substrate. The cleaved DNA substrate functions as both a primer and a template to initiate strand displacement amplification (SDA) to release primers. The released primers can further bind to a circular template to induce an exponential primer generation rolling circle amplification (PG-RCA) reaction, producing a large number of primers. The primers that resulted from the SDA and PG-RCA reaction can induce the subsequent recycling cleavage of signal probes, leading to the generation of a fluorescence signal. Taking advantage of the high amplification efficiency of triple-signal amplification and the low background signal resulting from single uracil repair-mediated inhibition of nonspecific amplification, this method exhibits a low detection limit of 0.026 U mL-1 and a large dynamic range of 4 orders of magnitude for hAAG. Moreover, this method has distinct advantages of simplicity and low cost, and it can further quantify the hAAG activity from HeLa cell extracts, holding great potential in clinical diagnosis and biomedical research.