Modeling competitive biosorption for methylene blue removal on rape straw powders using response surface methodology in a ternary dye aqueous solution.

The improvement of biosorption efficiency for selective dye removal in a multi-dye aqueous system has become an increasingly significant research topic. However, the competitive effects of coexisting dyes and the target dye in such systems remain uncertain due to complex interactions between adsorbent and coexisting dyes. Therefore, in this research, response surface methodology (RSM) model was effectively employed to investigate the competitive effects of allura red (AR) and malachite green (MG) on methylene blue (MB) removal in a ternary dye aqueous system using three different parts of rape straw powders. In the current design of RSM, the initial concentrations of AR and MG dyes ranging from 0 mg·L-1 to 500 mg·L-1 were considered as influencing factors, while the removal rates of MB on adsorbents at an initial concentration of 500 mg·L-1 were established as response values. The RSM models exhibited high correlation coefficients with adjusted R2 values of 0.9908 (pith core), 0.9870 (seedpods), and 0.9902 (shells), respectively, indicating a close fitted between predicted and actual values. The proposed models indicated that the perturbation effects of initial AR and MG concentrations were observed on the removal rates of MB by three types of rape straw powders in a ternary dye aqueous system, resulting in a decrease in MB removal rates, particularly at higher initial AR concentration due to stronger competitive effects compared to initial MG concentration. The structures of rape straw powders, including pith core, seedpods and shell, were analyzed using scanning eletron microscoe (SEM), energy dispersive spectroscopy (EDS), N2 physisorption isotherm, frourier transform infared spectroscopy (FTIR), Zeta potential classes and fluorescence spectrum before and after adsorption of MB in various dye aqueous systems. The characteristics of rape straw powders suggested that similar adsorption mechanisms, such as electrostatic attraction, pore diffusion, and group complex formation for MB, AR, and MG, respectively, occurred on the surfaces of adsorbents during their respective adsorption processes. This leads to significant competitive effects on the removal rates of MB in a ternary dye aqueous system, which are particularly influenced by initial AR concentrations as confirmed through fluorescence spectrum analysis.

Impact of AR and MG on MB removal was analyzed using simple methodologies.Competitive behaviors between AR, MG and MB were understood through RSM.Intense restrain effects on MB removal were revealed by AR concentration.

Optimization and mechanisms of methylene blue removal by foxtail millet shell from aqueous water and reuse in biosorption of Pb(II), Cd(II), Cu(II), and Zn(II) for secondary times.

Foxtail millet shell as a raw efficient adsorbent was chosen first to eliminate methylene blue (MB) based on the uneven surface with many micropores, lots of negative charges, various functional groups, and some primary elements. And then the adsorbent-loaded MB was used to remove Pb(II), Cd(II), Cu(II), and Zn(II) from aqueous water for secondary adsorption. The effects of various factors were explored and optimized for removal rates of MB on the surface of the adsorbent using response surface methodology (RSM). After these factors were optimized, the confirmed removal rates of MB by the adsorbents were reached at 92.04, 93.05, and 93.36%, respectively from aqueous water while the solution pH was at 3, 7, and 11, respectively. The behavior of adsorption for MB dye was well-described by Langmuir isotherm (R2 = 0.9951), demonstrating favorable monolayer adsorption of MB on the adsorbent with the maximum capacity of 165.07 mg·L-1 in aqueous water. The data of MB dye removal was better assessed by pseudo-second-order model (R2 ≥ 0.9033), indicating an exchange of electrons has occurred between the adsorbent and MB particles, especially K and Ca ions of the adsorbent. In addition, the adsorbent-loaded MB has still presented better adsorption abilities for Pb(II), Cd(II), Cu(II), and Zn(II), respectively after MB removal in aqueous water. The adsorption mechanisms of adsorption were explored with the characterizations of the adsorbent before and after adsorption for the target pollutants by the methods of TEM, SEM, nitrogen physisorption isotherms, XPS, EDS, IR, and zeta potential classes. In summary, the results presented that the foxtail millet shell could be applied to remove MB dye effectively from aqueous water with the combined effects of electrostatic attraction, ion exchange, functional groups binding, and pore diffusion, but also, the adsorbent loaded with MB can be still applied to eliminate Pb(II), Cd(II), Cu(II), and Zn(II) by effects of electrostatic attraction and functional groups complexation in aqueous water.Novelty Statement In the present work, (a) the raw foxtail millet shell as a new potential adsorbent was used to remove MB dye from aqueous water for the first times, and operational variables of adsorption MB were investigated and optimized using response surface methodology, (b) the foxtail millet shell loaded MB as a disused adsorbent without any chemical reagent added was carried out to remove Pb(II), Cd(II), Cu(II), and Zn(II) ions, respectively in aqueous water for a secondary cycle, (c) adsorption mechanisms of MB removal on the adsorbent and the target heavy metals on the disused adsorbent were explored by the various analytical methods. This work provides evidence for the adsorption of MB on the natural adsorbent and improves the utilization efficiency of the used adsorbent on Pb(II), Cd(II), Cu(II), and Zn(II) removal in aqueous water.

Biosorption of copper ions from aqueous solution using rape straw powders: Optimization, equilibrium and kinetic studies.

In this paper, the adsorption behaviors of Cu(II) from the aqueous solution using rape straw powders were studied. The effects of initial Cu(II) concentration, pH range and absorbent dosage on the adsorption efficiency of Cu(II) by rape straw powder were investigated by Box-Behnken Design based on response surface methodology. The values of coefficient constant of the nonlinear models were 0.9997, 0.9984 and 0.9944 for removal Cu(II) from aqueous solution using rape straw shell, seed pods and straw pith core, respectively, which could navigate the design space for various factors on effects of biosorption Cu(II) from aqueous solution. The various factors of pH and biosorbents dosage were the key factors that affecting the removal efficiency of Cu(II) from aqueous solution. The biosorption equilibrium data presented its favorable monolayer adsorption Cu(II) onto shell, seed pods and straw pith core, respectively. The pseudo-second order kinetic model was the proper approach to determine the adsorption kinetics. The biosorption of Cu(II) onto surfaces of rape straw powders were confirmed and ion-exchanged in the adsorption process by energy dispersive spectrometer. The critical groups, -OH, -CH, -NH3+, -CH3, -NH and -C-O, exhibited by the infrared spectra results, changed to suggest that these groups played critical roles, especially -CH3 in the adsorption of copper ions onto rape straw powders. The study provided evidences that rape straw powders can be used for removing Cu(II) from aqueous water.

[Determination of heavy metals in artificial soil on railway rock-cut slopes by microwave digestion-AAS].

The purpose of this paper is as follows: (1) Optimizing the parameters of microwave digestion-atomic absorption spectroscopy (AAS) and establishing method for the determination of heavy metals in artificial soils. (2) Evaluating heavy metal pollution conditions in artificial soil samples from railway rock-cut slopes. The results showed that the mixture of HNO3-H2O2-HF was found to have the best digestion efficiency; under the optimized conditions, the recoveries of the method ranged from 95% to 105%; the measurement precision and the relative deviation were less than 4% and 5%, respectively; the concentrations of Cd, Pb and Zn were significantly higher in the artificial soil on railway rock-cut slope than in the control soil, and they were 4.7, 1.3 and 1.2 times as much as the control soil, respectively; compared to the contents of Cr, Cu and Fe in control soils, there was no significant difference. This research will provide a reliable method for determining metal elements in artificial soils on rock-cut slopes and a theoretical basis for the management of the railway rock-cut slopes.

[Determination of heavy metal by AAS in railway rock-cut slope soil].

Heavy metal contents in railway rock-cut slope soil have directly influenced ecosystem on rock-cut slope and eco-envi- ronment safety of farmland nearby. In the study heavy metal Pb, Cd, Zn, Cu and Mn was determined by AAS in railway rock-cut slope and control soil samples on Cheng-Da Railway crossing purple soil in Sichuan province. The results showed that Pb and Mn were significantly higher in rock-cut soil than in control soil, that is 29.7%-35.4%, while Cd, Zn and Cu were similar in both soils.

Optimization and mechanisms of biosorption process of Zn(II) on rape straw powders in aqueous solution.

The different part powders of rape straw as adsorbents were performed to remove zinc ions from aqueous solution in this work. The various factors on influencing removal efficiency of Zn(II) were investigated, and the operational conditions were optimized using the Box-Behnken design of response surface methodology (RSM). Under the optimum conditions obtained, the removal rates of Zn(II) were attained to 100.00%, 78.02%, and 17.00% by straw pith core, seedpods, and shell of rape straw, respectively. Equilibrium and kinetic models were applied to evaluate the adsorption behaviors of Zn(II) on the adsorbents. The equilibrium data were best described by the Langmuir isotherm model, which indicated that the adsorption behaviors were favorably monolayer adsorption processes. The biosorption capacities of Zn(II) were 34.66 mg g-1, 36.41 mg g-1, and 36.74 mg g-1 of rape straw pith core; 23.33 mg g-1, 23.85 mg g-1, and 24.30 mg g-1 of seedpods; and 11.19 mg g-1, 11.23 mg g-1, and 11.27 mg g-1 of shell, respectively, at the various temperatures of 20 °C, 30 °C, and 40 °C based on Langmuir isotherm equation. The pseudo-second-order kinetic model was well to determine the adsorption kinetics, which suggested that ion exchange were occurred during adsorption processes of Zn(II). The characteristics of adsorbents before and after adsorption of Zn(II) were measured using the methods of scanning electron microscope (SEM), zeta potential classes, energy dispersive spectrometer (EDS), and Fourier transform infrared spectroscopy (FT-IR), respectively. The results provided evidences for the adsorption mechanisms of Zn(II) including electrostatic attraction, ion exchange, and functional group involvement on the three part powders of rape straw in aqueous water.

[Isolation of PVA-degrading symbiotic bacteria and examination of degradation characters].

From printing and dyeing actived sludge, PVA- degrading symbiotic bacteria was isolated. The symbiotic bacteria is composed of B1 and B2. During PVA biodegradation, B1 produces a certain growth factor for B2, B2 produces PVA-degrading enzyme. The PVA-degrading characters of the symbiotic bacteria are examined. When the concentration of PVA was 0.1, 0.5, 1g/L respectively,more than 80% of PVA was degradated after 7days. During the treatment of the dyeing and printing wastewater, when the temperature was 30 degree C ,the removal of COD(Cr) was 69.75%, the proper treating time was 12h.