Whole-Voltage-Range Solid-Solution Reaction in Layered Oxide Cathode of Sodium-Ion Batteries.

Layered manganese-based oxides (LMOs) are promising cathode materials for sodium-ion batteries (SIBs) due to their versatile structures. However, the Jahn-Teller effect of Mn3+ induces severe distortion of MnO6 octahedra, and the resultant low symmetry is responsible for the gliding of MnO2 layers and then inferior multiple-phase transitions upon Na+ extraction/insertion. Here, hexagonal P2-Na0.643 Li0.078 Mn0.827 Ti0.095 O2 is synthesized through the incorporation of Li and Ti into the distorted orthorhombic P'2-Na0.67 MnO2 to function as a phase-transition-free oxide cathode. It is revealed that Li in both the transition-metal and Na layers enhances the covalency of Mn-O bonds and allows degeneracy of Mn 3d eg orbitals to favor the formation of hexagonal phase, and the high strength of Ti-O bonds reduces the electrostatic interaction between Na and O for suppressed Na+ /vacancy rearrangements. These collectively lead to a whole-voltage-range solid-solution reaction between 1.8 and 4.3 V with a small volume variation of 1.49%. This rewards its excellent cycling stability (capacity retention of 90% after 500 cycles) and rate capability (89 mAh g-1 at 2000 mA g-1 ).

IL-6 promotes pluripotency of mouse embryonic stem cells and regulates cardiac differentiation in a development-dependent manner.

Interleukin 6 (IL-6), an important component of cardiac microenvironment, favors cardiac repair by improving cardiomyocyte regeneration in different models. This study aimed to investigate the effects of IL-6 on stemness maintenances and cardiac differentiation of mouse embryonic stem cells (mESCs). The mESCs were treated with IL-6 for two days, and then subjected to CCK-8 essay for proliferation analysis and quantitative real-time PCR (qPCR) to evaluate the mRNA expression of genes related to stemness and germinal layers differentiation. Phosphorylation levels of stem cell-related signal pathways were detected by Western blot. siRNA was used to interfere the function of STAT3 phosphorylation. Cardiac differentiation was investigated by the percentage of beating embryoid bodies (EBs) and qPCR analysis of cardiac progenitor markers and cardiac ion channels. IL-6 neutralization antibody was applied to block the endogenous IL-6 effects since the onset of cardiac differentiation (embryonic day of 0, EB0). The EBs were collected on EB7, EB10 and EB15 to investigate the cardiac differentiation by qPCR. On EB15, Western blot was applied to investigate the phosphorylation of several signaling pathways, and immunochemistry staining was adopted to trace the cardiomyocytes. IL-6 antibody was administered for two days (short term) on EB4, EB7, EB10 or EB15, and percentages of beating EBs at late developmental stage were recorded. The results showed that exogenous IL-6 promoted mESCs proliferation and favored maintenances of pluripotency, evidenced by up-regulated mRNA expression of oncogenes (c-fos, c-jun) and stemness markers (oct4, nanog), down-regulated mRNA expression of germ layer genes (branchyury, FLK-1, pecam, ncam, sox17), and increased phosphorylation of ERK1/2 and STAT3. siRNA targeting JAK/STAT3 partially attenuated the effects of IL-6 on cell proliferation and mRNA expression of c-fos and c-jun. During differentiation, long term IL-6 neutralization antibody application decreased the percentage of beating EBs, down-regulated mRNA expression of ISL1, GATA4, α-MHC, cTnT, kir2.1, cav1.2, and declined the fluorescence intensity of cardiac α actinin in EBs and single cell. Long term IL-6 antibody treatment decreased the phosphorylation of STAT3. In addition, short term (2 d) IL-6 antibody treatment starting from EB4 significantly reduced the percentage of beating EBs in late development stage, while short term IL-6 antibody treatment starting from EB10 significantly increased the percentage of beating EBs on EB16. These results suggest that exogenous IL-6 promotes mESCs proliferation and favors stemness maintenance. Endogenous IL-6 regulates mESC cardiac differentiation in a development-dependent manner. These findings provide important basis for the study of microenvironment on cell replacement therapy, as well as a new perspective for understanding the pathophysiology of heart diseases.

Editorial for focus on nanophase materials for next-generation lithium-ion batteries and beyond.

Lithium-ion batteries (LIBs) have revolutionized our society in many respects, and we are expecting even more favorable changes in our lifestyles with newer battery technologies. In pursuing such eligible batteries, nanophase materials play some important roles in LIBs and beyond technologies. Stimulated by their beneficial effects of nanophase materials, we initiated this Focus. Excitingly, this Focus collects 13 excellent original research and review articles related to the applications of nanophase materials in various rechargeable batteries, ranging from nanostructured electrode materials, nanoscale interface tailoring, novel separators, computational calculations, and advanced characterizations.

A lithium-oxygen battery based on lithium superoxide.

Batteries based on sodium superoxide and on potassium superoxide have recently been reported. However, there have been no reports of a battery based on lithium superoxide (LiO2), despite much research into the lithium-oxygen (Li-O2) battery because of its potential high energy density. Several studies of Li-O2 batteries have found evidence of LiO2 being formed as one component of the discharge product along with lithium peroxide (Li2O2). In addition, theoretical calculations have indicated that some forms of LiO2 may have a long lifetime. These studies also suggest that it might be possible to form LiO2 alone for use in a battery. However, solid LiO2 has been difficult to synthesize in pure form because it is thermodynamically unstable with respect to disproportionation, giving Li2O2 (refs 19, 20). Here we show that crystalline LiO2 can be stabilized in a Li-O2 battery by using a suitable graphene-based cathode. Various characterization techniques reveal no evidence for the presence of Li2O2. A novel templating growth mechanism involving the use of iridium nanoparticles on the cathode surface may be responsible for the growth of crystalline LiO2. Our results demonstrate that the LiO2 formed in the Li-O2 battery is stable enough for the battery to be repeatedly charged and discharged with a very low charge potential (about 3.2 volts). We anticipate that this discovery will lead to methods of synthesizing and stabilizing LiO2, which could open the way to high-energy-density batteries based on LiO2 as well as to other possible uses of this compound, such as oxygen storage.

[Effect of Mycobacterium tuberculosis higBA on Bacterial Stress Response and Intracellular Infection and Immunity].

Objective: To investigate the effect of Mycobacterium tuberculosis ( Mtb) higBA on bacterial stress response and intracellular infection and immunity. Methods: The target gene amplified from Mtb H37Rv genome was cloned to the vector and then transferred to Mycobacterium smegmatis ( Ms) to construct a recombinant strain. Stress response experiment and Raw264.7 mouse macrophage infection was carried out with Ms_higBA, the recombinant strain, and Ms_ vec, the vector strain. Tests were conducted to measure bacterial colony forming unit (CFU) and transcriptional levels of cytokines, including interleukin ( IL)-1ß, IL-6, IL-10, IL-12 p40, interferon ( IFN)- γ, tumor necrosis factor ( TNF)- α, and inducible nitric oxide synthase ( iNOS). Results: The recombinant strain, Ms_higBA, was constructed successfully. According to the findings of the stress response experiment, higBA could indeed enhance bacterial survival under certain conditions of in vitro culture. Intracellular infection experiment demonstrated that higBA enhanced bacterial survival in macrophages and influenced the transcriptional level of cytokines. Conclusion: The higBA genes from Mtb play a role in bacterial stress response and intracellular infection and immunity.

Improvement of the immunogenicity of ESAT-6 via fusion with the dodecameric protein dodecin of Mycobacterium tuberculosis.

Tuberculosis (TB) is a chronic infectious disease that creates a heavy medical burden worldwide. The only approved vaccine, Bacillus Calmette-Guérin (BCG), cannot fully protect adolescents and adults from TB. Therefore, there is an urgent need to develop an effective new vaccine. Previous studies have found that dodecin, a flavin-binding protein of Mycobacterium tuberculosis (Mtb), can form stable dodecamers and has the potential to improve the immunogenicity of Mtb antigens. In this study, we constructed the fusion protein dodecin-ESAT-6 and evaluated the immunogenicity of dodecin, ESAT-6, and dodecin-ESAT-6 separately. Our results showed that dodecin-ESAT-6 is a dodecameric protein that can withstand heat at 95 °C and under SDS-PAGE conditions. Dodecin-ESAT-6 increased the expression of the costimulatory molecules CD80, CD86, and major histocompatibility complex class II (MHC-II) on the surface of RAW264.7 macrophages. Mice immunized with dodecin-ESAT-6 exhibited higher percentages of antigen-specific CD4+ and CD8+ T lymphocytes, higher levels of spleen lymphocyte proliferation and IFN-γ and IL-2 secretion, and a lower level of IL-4 secretion than those immunized with ESAT-6. The IgG, IgG1, and IgG2a titers of the dodecin-ESAT-6 group were significantly higher than those of the ESAT-6 group. Dodecin-ESAT-6 elicited a high IgG2a/IgG1 ratio and tended to produce a predominantly Th1-like response. These results support the conclusion that the dodecin-ESAT-6 dodecameric protein induced strong Th1 immune responses and improved the immunogenicity of ESAT-6, which provides a new strategy for TB vaccine development.

Kinetic Limitations in Single-Crystal High-Nickel Cathodes.

High-nickel cathodes attract immense interest for use in lithium-ion batteries to boost Li-storage capacity while reducing cost. For overcoming the intergranular-cracking issue in polycrystals, single-crystals are considered an appealing alternative, but aggravating concerns on compromising the ionic transport and kinetic properties. We report here a quantitative assessment of redox reaction in single-crystal LiNi0.8 Mn0.1 Co0.1 O2 using operando hard X-ray microscopy/spectroscopy, revealing a strong dependence of redox kinetics on the state of charge (SOC). Specifically, the redox is sluggish at low SOC but increases rapidly as SOC increases, both in bulk electrodes and individual particles. The observation is corroborated by transport measurements and finite-element simulation, indicating that the sluggish kinetics in single-crystals is governed by ionic transport at low SOC and may be alleviated through synergistic interaction with polycrystals integrated into a same electrode.

Probing the Thermal-Driven Structural and Chemical Degradation of Ni-Rich Layered Cathodes by Co/Mn Exchange.

The intrinsic poor thermal stability of layered LiNixCoyMn1-x-yO2 (NCM) cathodes and the exothermic side reactions triggered by the associated oxygen release are the main safety threats for their large-scale implantation. In the NCM family, it is widely accepted that Ni is the stability troublemaker, while Mn has long been considered as a structure stabilizer, whereas the role of Co remains elusive. Here, via Co/Mn exchange in a Ni-rich LiNi0.83Co0.11Mn0.06O2 cathode, we demonstrate that the chemical and structural stability of the deep delithiated NCM cathodes are significantly dominated by Co rather than the widely reported Mn. Operando synchrotron X-ray characterization coupling with in situ mass spectrometry reveal that the Co4+ reduces prior to the reduction of Ni4+ and could thus prolong the Ni migration by occupying the tetrahedra sites and, hence, postpone the oxygen release and thermal failure. In contrast, the Mn itself is stable, but barely stabilizes the Ni4+. Our results highlight the importance of evaluating the intrinsic role of compositional tuning on the Ni-rich/Co-free layered oxide cathode materials to guarantee the safe operation of high-energy Li-ion batteries.

Cardiac fibroblast paracrine factors modulate mouse embryonic stem cells.

The study aims to investigate the effects of cardiac fibroblast (CF) paracrine factors on murine embryonic stem cells (ESCs). Conditioned mediums from either neonatal cardiac fibroblasts (ConM-NCF) or adult cardiac fibroblasts (ConM-ACF) were diluted by 1:50 and 1:5, respectively, to investigate whether these conditioned mediums impact murine ESCs distinctly with RT-real time PCR techniques, cell proliferation essay, ELISA and by counting percentage of beating embryoid bodies (EBs) during ESCs differentiation. The data showed that the paracrine ability of CFs changed dramatically during development, in which interleukin 6 (IL6) increased with maturation. ConM-NCF 1:50 and ConM-NCF 1:5 had opposite effects on the pluripotent markers, although they both reduced mouse ESC proliferation. ConM-ACF 1:50 promoted ESCs pluripotent markers and proliferation, while ConM-ACF 1:5 exerted negative effects. All CF-derived conditioned mediums inhibited cardiac differentiation, but with distinguishable features: ConM-NCF 1:50 slightly decreased the early cardiac differentiation without altering the maturation tendency or cardiac specific markers in EBs at differentiation of day 17; ConM-ACF 1:50 had more significant inhibitory effects on early cardiac differentiation than ConM-NCF 1:50 and impeded cardiac maturation with upregulation of cardiac specific markers. In addition, IL6 neutralization antibody attenuated positive effect of ConM-ACF 1:50 on ESCs proliferation, but had no effects on ConM-NCF 1:50. Long-term IL6 neutralization reduced the percentage of beating EBs at early developmental stage, but did not alter the late cardiac differentiation. Taken together, both the quality and quantity of factors and cytokines secreted by CFs are critical for the ESC fate. IL6 could be a favorable cytokine for ESC pluripotency and the early cardiac differentiation.

[Preliminary Study on the Secretory Performance of Mycobacterium tuberculosis Hypoxic Response Protein 1 (Rv2626c)].

OBJECTIVE: To verify the secretory ability of the hypoxic response protein 1 (HRP1) encoded by Mycobacterium tuberculosis (Mtb) Rv2626c. METHODS: The target gene attached with His tag was amplified from the genome of Mtb standard virulence strain H37Rv. The recombinant plasmid contained the above amplified product was constructed and electroporated into Mycobacterium smegmatis (Ms) (MC 2155) to construct a recombinant strain. Protein expression was induced under heat condition, and the expression of protein from the culture filtrates and the bacterial lysates was detected afterward. The 10 kDa culture filtrate antigen (CFP-10) (Ms) and CFP-10 (Mtb) were used as positive controls, and the cytoplasmic protein heat shock protein 65 (GroEL2) (Mtb) was used as negative controls. RESULTS: The HRP1, GroEL2 (Mtb), CFP-10 (Mtb) and CFP-10 (Ms) were successfully amplified by PCR from recombinant plasmid, and sequencing results of the recombinant plasmid is right, confirming the successful construction of the recombinant plasmid. The recombinant Ms was successfully constructed and it could express the proteins GroEL2 (Mtb), HRP1, CFP-10 (Mtb) and CFP-10 (Ms). The target protein HRP1 was detected in both of the lysate and the culture filtrate of the recombinant strain by Western blot, which was consistent with the positive control CFP-10. The negative control GroEL2 (Mtb) was only detected in the bacterial lysate, but not detected in the culture filtrate. CONCLUSION: The protein HRP1 encoded by Mtb Rv2626c can be secreted out of Ms by the secretion system of Ms. It may be a secreted protein and play an important role in the pathogenesis of Mtb.

Electrostatic Self-Assembly Enabling Integrated Bulk and Interfacial Sodium Storage in 3D Titania-Graphene Hybrid.

Room-temperature sodium-ion batteries have attracted increased attention for energy storage due to the natural abundance of sodium. However, it remains a huge challenge to develop versatile electrode materials with favorable properties, which requires smart structure design and good mechanistic understanding. Herein, we reported a general and scalable approach to synthesize three-dimensional (3D) titania-graphene hybrid via electrostatic-interaction-induced self-assembly. Synchrotron X-ray probe, transmission electron microscopy, and computational modeling revealed that the strong interaction between titania and graphene through comparably strong van der Waals forces not only facilitates bulk Na+ intercalation but also enhances the interfacial sodium storage. As a result, the titania-graphene hybrid exhibits exceptional long-term cycle stability up to 5000 cycles, and ultrahigh rate capability up to 20 C for sodium storage. Furthermore, density function theory calculation indicated that the interfacial Li+, K+, Mg2+, and Al3+ storage can be enhanced as well. The proposed general strategy opens up new avenues to create versatile materials for advanced battery systems.

Chemistry Design Towards a Stable Sulfide-Based Superionic Conductor Li4 Cu8 Ge3 S12.

Sulfide-based superionic conductors with high ionic conductivity have been explored as candidates for solid-state Li batteries. However, moisture hypersensitivity has made their manufacture complicated and costly and also impeded applications in batteries. Now, a sulfide-based superionic conductor Li4 Cu8 Ge3 S12 with superior stability was developed based on the hard/soft acid-base theory. The compound is stable in both moist air and aqueous LiOH aqueous solution. The electrochemical stability window was up to 1.5 V. An ionic conductivity of 0.9×10-4  S cm with low activation energy of 0.33 eV was achieved without any optimization. The material features a rigid Cu-Ge-S open framework that increases its stability. Meanwhile, the weak bonding between Li+ and the framework promotes ionic conductivity. This work provides a structural configuration in which weak Li bonding in the rigid framework promotes an environment for highly conductive and stable solid-state electrolytes.

Cationic Ordering Coupled to Reconstruction of Basic Building Units during Synthesis of High-Ni Layered Oxides.

Metal (M) oxides are one of the most interesting and widely used solids, and many of their properties can be directly correlated to the local structural ordering within basic building units (BBUs). One particular example is the high-Ni transition metal layered oxides, potential cathode materials for Li-ion batteries whose electrochemical activity is largely determined by the cationic ordering in octahedra (e.g., the BBUs in such systems). Yet to be firmly established is how the BBUs are inherited from precursors and subsequently evolve into the desired ordering during synthesis. Herein, a multimodal in situ X-ray characterization approach is employed to investigate the synthesis process in preparing LiNi0.77Mn0.13Co0.10O2 from its hydroxide counterpart, at scales varying from the long-range to local individual octahedral units. Real-time observation corroborated by first-principles calculations reveals a topotactic transformation throughout the entire process, during which the layered framework is retained; however, due to preferential oxidation of Co and Mn over Ni, significant changes happen locally within NiO6 octahedra. Specifically, oxygen loss and the associated symmetry breaking occur in NiO6; as a consequence, Ni2+ ions become highly mobile and tend to mix with Li, causing high cationic disordering upon formation of the layered oxides. Only through high-temperature heat treatment, Ni is further oxidized, thereby inducing symmetry reconstruction and, concomitantly, cationic ordering within NiO6 octahedra. Findings from this study shed light on designing high-Ni layered oxide cathodes and, more broadly, various functional materials through synthetic control of the constituent BBUs.

Insight into Ca-Substitution Effects on O3-Type NaNi1/3 Fe1/3 Mn1/3 O2 Cathode Materials for Sodium-Ion Batteries Application.

O3-type NaNi1/3 Fe1/3 Mn1/3 O2 (NaNFM) is well investigated as a promising cathode material for sodium-ion batteries (SIBs), but the cycling stability of NaNFM still needs to be improved by using novel electrolytes or optimizing their structure with the substitution of different elements sites. To enlarge the alkali-layer distance inside the layer structure of NaNFM may benefit Na+ diffusion. Herein, the effect of Ca-substitution is reported in Na sites on the structural and electrochemical properties of Na1-x Cax/2 NFM (x = 0, 0.05, 0.1). X-ray diffraction (XRD) patterns of the prepared Na1-x Cax/2 NFM samples show single α-NaFeO2 type phase with slightly increased alkali-layer distance as Ca content increases. The cycling stabilities of Ca-substituted samples are remarkably improved. The Na0.9 Ca0.05 Ni1/3 Fe1/3 Mn1/3 O2 (Na0.9 Ca0.05 NFM) cathode delivers a capacity of 116.3 mAh g-1 with capacity retention of 92% after 200 cycles at 1C rate. In operando XRD indicates a reversible structural evolution through an O3-P3-P3-O3 sequence of Na0.9 Ca0.05 NFM cathode during cycling. Compared to NaNMF, the Na0.9 Ca0.05 NFM cathode shows a wider voltage range in pure P3 phase state during the charge/discharge process and exhibits better structure recoverability after cycling. The superior cycling stability of Na0.9 Ca0.05 NFM makes it a promising material for practical applications in sodium-ion batteries.

Parasitic Reactions in Nanosized Silicon Anodes for Lithium-Ion Batteries.

When designing nano-Si electrodes for lithium-ion batteries, the detrimental effect of the c-Li15Si4 phase formed upon full lithiation is often a concern. In this study, Si nanoparticles with controlled particle sizes and morphology were synthesized, and parasitic reactions of the metastable c-Li15Si4 phase with the nonaqueous electrolyte was investigated. The use of smaller Si nanoparticles (∼60 nm) and the addition of fluoroethylene carbonate additive played decisive roles in the parasitic reactions such that the c-Li15Si4 phase could disappear at the end of lithiation. This suppression of c-Li15Si4 improved the cycle life of the nano-Si electrodes but with a little loss of specific capacity. In addition, the characteristic c-Li15Si4 peak in the differential capacity (dQ/dV) plots can be used as an early-stage indicator of cell capacity fade during cycling. Our findings can contribute to the design guidelines of Si electrodes and allow us to quantify another factor to the performance of the Si electrodes.

Insights into the Distinct Lithiation/Sodiation of Porous Cobalt Oxide by in Operando Synchrotron X-ray Techniques and Ab Initio Molecular Dynamics Simulations.

Sodium-ion batteries (SIBs) have been considered as one of the promising power source candidates for the stationary storage industries owing to the much lower cost of sodium than lithium. It is well-known that the electrode materials largely determine the energy density of the battery systems. However, recent discoveries on the electrode materials showed that most of them present distinct lithium and sodium storage performance, which is not yet well understood. In this work, we performed a comparative understanding on the structural changes of porous cobalt oxide during its electrochemical lithiation and sodiation process by in operando synchrotron small angel X-ray scattering, X-ray diffraction, and X-ray absorption spectroscopy. It was found that compared to the lithiation process, the porous cobalt oxide undergoes less pore structure changes, oxidation state, and local structure changes as well as crystal structure evolution during its sodiation process, which is attributed to the intrinsic low sodiation activity of cobalt oxide as evidenced by ab initio molecular dynamics simulations. Moreover, it was indicated that the sodiation activity of metal sulfides is higher than that of metal oxides, indicating a better candidate for SIBs. Such understanding is crucial for future design and improvement of high-performance electrode materials for SIBs.

Excess Li-Ion Storage on Reconstructed Surfaces of Nanocrystals To Boost Battery Performance.

Because of their enhanced kinetic properties, nanocrystallites have received much attention as potential electrode materials for energy storage. However, because of the large specific surface areas of nanocrystallites, they usually suffer from decreased energy density, cycling stability, and effective electrode capacity. In this work, we report a size-dependent excess capacity beyond theoretical value (170 mA h g-1) by introducing extra lithium storage at the reconstructed surface in nanosized LiFePO4 (LFP) cathode materials (186 and 207 mA h g-1 in samples with mean particle sizes of 83 and 42 nm, respectively). Moreover, this LFP composite also shows excellent cycling stability and high rate performance. Our multimodal experimental characterizations and ab initio calculations reveal that the surface extra lithium storage is mainly attributed to the charge passivation of Fe by the surface C-O-Fe bonds, which can enhance binding energy for surface lithium by compensating surface Fe truncated symmetry to create two types of extra positions for Li-ion storage at the reconstructed surfaces. Such surface reconstruction nanotechnology for excess Li-ion storage makes full use of the large specific surface area of the nanocrystallites, which can maintain the fast Li-ion transport and greatly enhance the capacity. This discovery and nanotechnology can be used for the design of high-capacity and efficient lithium ion batteries.

Diosgenin Glucoside Protects against Spinal Cord Injury by Regulating Autophagy and Alleviating Apoptosis.

Spinal cord injury (SCI) is a severe traumatic lesion of central nervous system (CNS) with only a limited number of restorative therapeutic options. Diosgenin glucoside (DG), a major bioactive ingredient of Trillium tschonoskii Max., possesses neuroprotective effects through its antioxidant and anti-apoptotic functions. In this study, we investigated the therapeutic benefit and underlying mechanisms of DG treatment in SCI. We found that in Sprague-Dawley rats with traumatic SCI, the expressions of autophagy marker Light Chain 3 (LC3) and Beclin1 were decreased with concomitant accumulation of autophagy substrate protein p62 and ubiquitinated proteins, indicating an impaired autophagic activity. DG treatment, however, significantly attenuated p62 expression and upregulated the Rheb/mTOR signaling pathway (evidenced as Ras homolog enriched in brain) due to the downregulation of miR-155-3p. We also observed significantly less tissue injury and edema in the DG-treated group, leading to appreciable functional recovery compared to that of the control group. Overall, the observed neuroprotection afforded by DG treatment warrants further investigation on its therapeutic potential in SCI.

The Relationship between the Relative Solvating Power of Electrolytes and Shuttling Effect of Lithium Polysulfides in Lithium-Sulfur Batteries.

Relative solvating power, that is, the ratio of the coordination ratios between a solvent and the reference solvent, was used to probe the quantitative structure-activity relationship of electrolyte solvents and the lithium polysulfide (LiPS) dissolution in lithium-sulfur batteries. Internally referenced diffusion-ordered nuclear magnetic resonance spectroscopy (IR-DOSY) was used to determine the diffusion coefficient and coordination ratio, from which the relative solvating power can be easily measured. The higher the relative solvating power of an ethereal solvent, the more severe will be the LiPS dissolution and the lower the coulombic efficiency of the lithium-sulfur battery. A linear relationship was established between the logarithm of relative solvating power of a solvent and the degree of LiPS dissolution, rendering relative solvating power an important parameter in choosing the electrolyte solvent for lithium-sulfur batteries.

Reversible Redox Chemistry of Azo Compounds for Sodium-Ion Batteries.

Sustainable sodium-ion batteries (SSIBs) using renewable organic electrodes are promising alternatives to lithium-ion batteries for the large-scale renewable energy storage. However, the lack of high-performance anode material impedes the development of SSIBs. Herein, we report a new type of organic anode material based on azo group for SSIBs. Azobenzene-4,4'-dicarboxylic acid sodium salt is used as a model to investigate the electrochemical behaviors and reaction mechanism of azo compound. It exhibits a reversible capacity of 170 mAh g-1 at 0.2C. When current density is increased to 20C, the reversible capacities of 98 mAh g-1 can be retained for 2000 cycles, demonstrating excellent cycling stability and high rate capability. The detailed characterizations reveal that azo group acts as an electrochemical active site to reversibly bond with Na+ . The reversible redox chemistry between azo compound and Na ions offer opportunities for developing long-cycle-life and high-rate SSIBs.