Bioelectrochemical remediation of Cr(VI)/Cd(II)-contaminated soil in bipolar membrane microbial fuel cells.

Heavy-metal contaminated soils post great environmental and health concerns. In this study, Cr and Cd which are frequently observed in contaminated soils, were selected as representatives of hazardous heavy metals because of their different redox potentials and electric charges. Cr(VI)-, Cd(II)-, Cr(VI)/Cd(II)-contaminated soils were remediated in two-chamber air-cathode MFCs, in order to investigate the remediation of soil contaminated by single heavy metal and mixed heavy metals. Four ion exchange membranes (IEMs) were first evaluated to find out that bipolar membrane (BPM) was able to well maintain pH in both anolyte and catholyte, which was beneficial to support biological metabolism and heavy metal removal. It was also found that heavy metal ions (Cr, Cd or Cr/Cd) could migrate toward the cathode forming a concentration gradient under the weak electric field. The interaction between negatively charged Cr and positively charged Cd had no major effect to hinder each other on the migration, suggesting that the reduction reaction and electric field should be the main motivation for metal ion migration. The remediation performance of mixed heavy metal contaminated soil was superior to that of single heavy metal contaminated soil, for the possible reason of smaller internal resistance under mixed heavy metal condition.

Removal of refractory organics in wastewater by coagulation/flocculation with green chlorine-free coagulants.

Coagulation/flocculation is considered an economical and practical technology to remove refractory organic matter from wastewater. Coagulants containing chlorine may release chloride ions into water, thereby resulting in corrosion. A green chlorine-free coagulant of polyaluminum ferric silicate (PSAF) was synthesized to treat non-oily (e.g., humus wastewater) and oily refractory wastewaters (e.g., lubricating oil wastewater). Results showed that the highest removal efficiency of humus substances in non-oily wastewater achieved 96.0% at pH 7.0 using PSAF alone. When treating oily wastewater, the dosage and addition sequence of PAMALAM significantly affected the coagulation performance. The removal efficiencies of turbidity, chemical oxygen demand, and total nitrogen were increased by 0.3, 1.8, and 5.9 folds, respectively, with the optimal adding sequence of PSAF +0.08% PAMALAM. More fulvic acid-like substances can be removed during this process. The analysis of zeta potential and floc properties revealed that charge neutralization, sweep, and adsorption/entrapment mechanisms existed during the single PSAF coagulation process, and PAMALAM mainly improved the adsorption, bridging, and sweep function.