Advances in Electrochemical Biosensor Technologies for the Detection of Nucleic Acid Breast Cancer Biomarkers.

Breast cancer is the second leading cause of cancer deaths in women worldwide; therefore, there is an increased need for the discovery, development, optimization, and quantification of diagnostic biomarkers that can improve the disease diagnosis, prognosis, and therapeutic outcome. Circulating cell-free nucleic acids biomarkers such as microRNAs (miRNAs) and breast cancer susceptibility gene 1 (BRCA1) allow the characterization of the genetic features and screening breast cancer patients. Electrochemical biosensors offer excellent platforms for the detection of breast cancer biomarkers due to their high sensitivity and selectivity, low cost, use of small analyte volumes, and easy miniaturization. In this context, this article provides an exhaustive review concerning the electrochemical methods of characterization and quantification of different miRNAs and BRCA1 breast cancer biomarkers using electrochemical DNA biosensors based on the detection of hybridization events between a DNA or peptide nucleic acid probe and the target nucleic acid sequence. The fabrication approaches, the biosensors architectures, the signal amplification strategies, the detection techniques, and the key performance parameters, such as the linearity range and the limit of detection, were discussed.

Electrochemistry of Flavonoids: A Comprehensive Review.

Flavonoids represent a large group of aromatic amino acids that are extensively disseminated in plants. More than six thousand different flavonoids have been isolated and identified. They are important components of the human diet, presenting a broad spectrum of health benefits, including antibacterial, antiviral, antimicrobial, antineoplastic, anti-mutagenic, anti-inflammatory, anti-allergic, immunomodulatory, vasodilatory and cardioprotective properties. They are now considered indispensable compounds in the healthcare, food, pharmaceutical, cosmetic and biotechnology industries. All flavonoids are electroactive, and a relationship between their electron-transfer properties and radical-scavenging activity has been highlighted. This review seeks to provide a comprehensive overview concerning the electron-transfer reactions in flavonoids, from the point of view of their in-vitro antioxidant mode of action. Flavonoid redox behavior is related to the oxidation of the phenolic hydroxy groups present in their structures. The fundamental principles concerning the redox behavior of flavonoids will be described, and the phenol moiety oxidation pathways and the effect of substituents and experimental conditions on flavonoid electrochemical behavior will be discussed. The final sections will focus on the electroanalysis of flavonoids in natural products and their identification in highly complex matrixes, such as fruits, vegetables, beverages, food supplements, pharmaceutical compounds and human body fluids, relevant for food quality control, nutrition, and healthcare research.

8-oxoguanine and 8-oxodeoxyguanosine Biomarkers of Oxidative DNA Damage: A Review on HPLC-ECD Determination.

Reactive oxygen species (ROS) are continuously produced in living cells due to metabolic and biochemical reactions and due to exposure to physical, chemical and biological agents. Excessive ROS cause oxidative stress and lead to oxidative DNA damage. Within ROS-mediated DNA lesions, 8-oxoguanine (8-oxoG) and its nucleotide 8-oxo-2'-deoxyguanosine (8-oxodG)-the guanine and deoxyguanosine oxidation products, respectively, are regarded as the most significant biomarkers for oxidative DNA damage. The quantification of 8-oxoG and 8-oxodG in urine, blood, tissue and saliva is essential, being employed to determine the overall effects of oxidative stress and to assess the risk, diagnose, and evaluate the treatment of autoimmune, inflammatory, neurodegenerative and cardiovascular diseases, diabetes, cancer and other age-related diseases. High-performance liquid chromatography with electrochemical detection (HPLC-ECD) is largely employed for 8-oxoG and 8-oxodG determination in biological samples due to its high selectivity and sensitivity, down to the femtomolar range. This review seeks to provide an exhaustive analysis of the most recent reports on the HPLC-ECD determination of 8-oxoG and 8-oxodG in cellular DNA and body fluids, which is relevant for health research.

Nanostructured material-based electrochemical sensing of oxidative DNA damage biomarkers 8-oxoguanine and 8-oxodeoxyguanosine: a comprehensive review.

Oxidative DNA damage plays an important role in the pathogenesis of various diseases. Among oxidative DNA lesions, 8-oxoguanine (8-oxoG) and its corresponding nucleotide 8-oxo-2'-deoxyguanosine (8-oxodG), the guanine and deoxyguanosine oxidation products, have gained much attention, being considered biomarkers for oxidative DNA damage. Both 8-oxoG and 8-oxodG are used to predict overall body oxidative stress levels, to estimate the risk, to detect, and to make prognosis related to treatment of cancer, degenerative, and other age-related diseases. The need for rapid, easy, and low-cost detection and quantification of 8-oxoG and 8-oxodG biomarkers of oxidative DNA damage in complex samples, urine, blood, and tissue, caused an increasing interest on electrochemical sensors based on modified electrodes, due to their high sensitivity and selectivity, low-cost, and easy miniaturization and automation. This review aims to provide a comprehensive and exhaustive overview of the fundamental principles concerning the electrochemical determination of the biomarkers 8-oxoG and 8-oxodG using nanostructured materials (NsM), such as carbon nanotubes, carbon nanofibers, graphene-related materials, gold nanomaterials, metal nanoparticles, polymers, nanocomposites, dendrimers, antibodies and aptamers, and modified electrochemical sensors.

DNA Electrochemical Biosensors for In Situ Probing of Pharmaceutical Drug Oxidative DNA Damage.

Deoxyribonucleic acid (DNA) electrochemical biosensors are devices that incorporate immobilized DNA as a molecular recognition element on the electrode surface, and enable probing in situ the oxidative DNA damage. A wide range of DNA electrochemical biosensor analytical and biotechnological applications in pharmacology are foreseen, due to their ability to determine in situ and in real-time the DNA interaction mechanisms with pharmaceutical drugs, as well as with their degradation products, redox reaction products, and metabolites, and due to their capacity to achieve quantitative electroanalytical evaluation of the drugs, with high sensitivity, short time of analysis, and low cost. This review presents the design and applications of label-free DNA electrochemical biosensors that use DNA direct electrochemical oxidation to detect oxidative DNA damage. The DNA electrochemical biosensor development, from the viewpoint of electrochemical and atomic force microscopy (AFM) characterization, and the bottom-up immobilization of DNA nanostructures at the electrode surface, are described. Applications of DNA electrochemical biosensors that enable the label-free detection of DNA interactions with pharmaceutical compounds, such as acridine derivatives, alkaloids, alkylating agents, alkylphosphocholines, antibiotics, antimetabolites, kinase inhibitors, immunomodulatory agents, metal complexes, nucleoside analogs, and phenolic compounds, which can be used in drug analysis and drug discovery, and may lead to future screening systems, are reviewed.

Calcium channel blocker lercanidipine electrochemistry using a carbon black-modified glassy carbon electrode.

Lercanidipine, a third-generation dihydropyridine calcium L-type channel blocker, redox behavior at different carbon electrode materials, in a wide pH range, using cyclic, square-wave, and differential pulse voltammetry, was studied. A comparison was made between unmodified glassy carbon electrode (GCE) and boron-doped diamond electrode (BDDE), and GCE and BDDE modified with a carbon black (CB) nanoparticle embedded within a dihexadecylphosphate (DHP) nanostructured film (CB-DHP/GCE and CB-DHP/BDDE). Lercanidipine oxidation, for 3.4 < pH < 9.5, is an irreversible, diffusion-controlled, pH-dependent process that occurs in two consecutive steps, with the transfer of one electron and one proton, at the N1 and C4 positions in the 1,4-dihydropyridine ring. For pH > 9.5, both oxidation processes are pH-independent and a pKa = 9.40 was determined. Lercanidipine reduction at pH = 7.0 is an irreversible process, and the lercanidipine reduction products are electroactive and follow a reversible electron transfer reaction. Lercanidipine electroanalytical determination, at a nanostructured GCE modified with a CB-DHP film (CB-DHP/GCE), with no need for N2 purging, with a detection limit of 0.058 µM (3.58 × 10-5 g L-1) and a quantification limit of 0.176 µM (1.08 × 10-4 g L-1), was achieved. Graphical abstract.

Natural phenolic antioxidants electrochemistry: Towards a new food science methodology.

Natural phenolic compounds are abundant in the vegetable kingdom, occurring mainly as secondary metabolites in a wide variety of chemical structures. Around 10,000 different plant phenolic derivatives have been isolated and identified. This review provides an exhaustive overview concerning the electron transfer reactions in natural polyphenols, from the point of view of their in vitro antioxidant and/or pro-oxidant mode of action, as well as their identification in highly complex matrixes, for example, fruits, vegetables, wine, food supplements, relevant for food quality control, nutrition, and health research. The accurate assessment of polyphenols' redox behavior is essential, and the application of the electrochemical methods in routine quality control of natural products and foods, where the polyphenols antioxidant activity needs to be quantified in vitro, is of the utmost importance. The phenol moiety oxidation pathways and the effect of substituents and experimental conditions on their electrochemical behavior will be reviewed. The fundamental principles concerning the redox behavior of natural polyphenols, specifically flavonoids and other benzopyran derivatives, phenolic acids and ester derivatives, quinones, lignins, tannins, lignans, essential oils, stilbenes, curcuminoids, and chalcones, will be described. The final sections will focus on the electroanalysis of phenolic antioxidants in natural products and the electroanalytical evaluation of in vitro total antioxidant capacity.

Amyloid Beta Peptide VHHQ, KLVFF, and IIGLMVGGVV Domains Involved in Fibrilization: AFM and Electrochemical Characterization.

The time-dependent structural modifications and oxidation behavior of specifically chosen five short amyloid beta (Aß) peptides, Aß1-16, Aß1-28, Aß10-20, Aß12-28, and Aß17-42, fragments of the complete human Aß1-40 peptide, were investigated by atomic force microscopy (AFM) and voltammetry. The objective was to determine the influence of different Aß domains (VHHQ that contains electroactive histidine H residues, KLVFF that is the peptide hydrophobic aggregation core, and IIGLMVGGVV that is the C-terminus hydrophobic region), and of Aß peptide hydrophobicity, in the fibrilization mechanism. The short Aß peptides absence of aggregation or the time-dependent aggregation mechanisms, at room temperature, in free chloride media, within the time window from 0 to 48 h, were established by AFM via changes in their adsorption morphology, and by differential pulse voltammetry, via modifications of the amino acid residues oxidation peak currents. The first oxidation peak was of tyrosine Y residue and the second peak was of histidine H and methionine M residues oxidation. A correlation between the presence of an intact highly hydrophobic KLVFF aggregation core and the time-dependent changes on the Aß peptides aggregation was found. The hydrophobic C-terminal domain IIGLMVGGVV, present in the Aß1-40 peptide, also contributed to accelerate the formation of Aß1-40 peptide aggregates and fibrils.

Atomic Force Microscopy and Voltammetric Investigation of Quadruplex Formation between a Triazole-Acridine Conjugate and Guanine-Containing Repeat DNA Sequences.

The interactions of the Tetrahymena telomeric repeat sequence d(TG4T) and the polyguanylic acid (poly(G)) sequence with the quadruplex-targeting triazole-linked acridine ligand GL15 were investigated using atomic force microscopy (AFM) at a highly oriented pyrolytic graphite and voltammetry at a glassy carbon electrode. GL15 interacted with both sequences, in a time dependent manner, and G-quadruplex formation was detected. AFM showed the adsorption of quadruplexes as small d(TG4T) and poly(G) spherical aggregates and large quadruplex-based poly(G) assemblies, and voltammetry showed the decrease and disappearance of GL15 and guanine oxidation peak currents and appearance of the G-quadruplex oxidation peak. The GL15 molecule strongly stabilized and accelerated G-quadruplex formation in both Na(+) and K(+) ion-containing solution, although only K(+) promoted the formation of perfectly aligned tetra-molecular G-quadruplexes. The small-molecule complex with the d(TG4T) quadruplex is discrete and approximately globular, whereas the G-quadruplex complex with poly(G) is formed at a number of points along the length of the polynucleotide, analogous to beads on a string.

Quadruplex nanostructures of d(TGGGGT): influence of sodium and potassium ions.

The Tetrahymena telomeric repeat sequence d(TG4T) contains only guanine (G) and thymine (T) bases and has medical and nanotechnological applications because of its ability to self-assemble into stiff tetra-molecular parallel-stranded G-quadruplexes. The hexadeoxynucleotide d(TG4T) was studied using atomic force microscopy (AFM) on the highly oriented pyrolytic graphite surface and differential pulse (DP) voltammetry at a glassy carbon electrode. The d(TG4T) single-strands self-assembled into G-quadruplex structures, very fast in K(+) ions solution and slowly in Na(+) ions containing solution. The G-quadruplex structures were detected in AFM by the adsorption of small spherical aggregates and by DP voltammetry by the G oxidation peak decrease and G-quartets oxidation peak occurrence, in a time and K(+) ions concentration dependent manner. In the presence of Na(+) ions, the d(TG4T) single-strands also slowly self-assembled into higher-order nanostructures, detected by AFM as short nanowires and nanostructured films that were never observed in K(+) ions containing solution.

Self-assembled G-quadruplex nanostructures: AFM and voltammetric characterization.

G-rich oligodeoxynucleotides (ODNs) have great medical and nanotechnological potential, because they can self-assemble into G-quadruplexes and higher-order nanostructures. The folding properties of d(G)10, d(TG9) and d(TG8T) ODNs were studied using atomic force microscopy (AFM) and voltammetry at carbon electrodes. Single-stranded ODNs, in Na(+) containing solutions and for short incubation times, were detected using AFM as network films and polymeric structures and using voltammetry by the occurrence of only the guanine oxidation peak. G-quadruplexes, in Na(+) containing solutions and long incubation times, or in K(+) containing solutions, were detected using AFM as spherical aggregates and using voltammetry by the decrease of the guanine oxidation peak and the occurrence of the G-quartet oxidation peak. Concerning the self-assembling into higher-order nanostructures, d(G)10 was the only sequence forming G-nanowires observed using AFM, d(TG9) formed short G-based super-structures that adsorbed as rod-like shape aggregates, and d(TG8T) formed no nanostructures, due to the presence of thymine residues at both 5' and 3' ends.

Electrochemical Sensing of Curcumin: A Review.

Curcumin is a natural polyphenol derived from turmeric (Curcuma longa) root that has been used for centuries as a spice, coloring agent, and medicine. Curcumin presents anti-inflammatory, antioxidant, anticarcinogenic, antimicrobial, antiviral, antimalarial, hepatoprotective, thrombosuppressive, cardiovascular, hypoglycemic, antiarthritic, and anti-neurodegenerative properties. It scavenges different forms of free radicals and acts on transcription factors, growth factors and their receptors, cytokines, enzymes, and genes, regulating cell proliferation and apoptosis. Curcumin is electroactive, and a relationship between its electron transfer properties and radical-scavenging activity has been highlighted. The objective of this review is to provide a comprehensive overview of the curcumin electron transfer reactions, with emphasis on the controversial aspects related to its oxidation mechanism. The final sections will focus on the electroanalysis of curcumin in natural products, highlighting the most important sensing strategies, based on functional electrodes and nanostructured materials, essential for the development of more efficient in vitro methods of detection and quantification of curcumin in food samples, supplements, and nutripharmaceuticals.

Electrochemistry of chemotherapeutic alkylating agents and their interaction with DNA.

Alkylating agents were among the first anticancer drugs to be discovered and continue to be the most commonly used in chemotherapy. They are electrophiles that react with the ring nitrogen and extracyclic oxygen atoms of DNA bases, forming covalent adducts that further lead to cross-linking of DNA strands, abnormal base pairing or DNA strand breaks. The investigation and quantitative analysis of alkylating agents in biological samples are essential for monitoring the therapy progression and efficiency, understanding their pharmacokinetics and develop new more effective and specific chemotherapeutical drugs. Among biotechnological methods, electrochemical techniques are particularly important in pharmaceutical medicine, owing to their rapid detection, great sensitivity, robustness, exceptional detection limits, ability to be used with small analyte volumes in turbid biofluids, and easy adaptability to miniaturization and point-of-care (POC) testing. This article provides first an exhaustive review concerning the electrochemical methods of characterization and quantification of different classes of chemotherapeutic alkylating agents (triazenes and hydrazines, nitrosoureas, nitrogen mustards, oxazaphosphorines, alkyl alkane sulfonates and ethylene imines) in standard samples, pharmaceutical formulations and biological matrixes. The second part of the article focuses on the recent electrochemical methodologies and DNA-electrochemical biosensors developed to study the interaction of alkylating agents with DNA. These studies are relevant for obtaining real-time details about the alkylating agents' mechanism of action and for assessing the oxidative DNA damage they cause, important for the development of improved antineoplastic drugs.

In situ evaluation of anticancer drug methotrexate-DNA interaction using a DNA-electrochemical biosensor and AFM characterization.

An in situ evaluation of the dsDNA-methotrexate (MTX) interaction was performed by voltammetry using a DNA-electrochemical biosensor and characterized by atomic force microscopy (AFM) at a highly oriented pyrolytic graphite (HOPG) surface. Electrochemical experiments in incubated solutions showed that the interaction of MTX with dsDNA leads to modifications to the dsDNA structure in a time-dependent manner. The AFM images show reorganization of the DNA self-assembled network on the surface of the HOPG electrode upon binding methotrexate and the formation of a more densely packed and slightly thicker MTX-dsDNA lattice with a large number of aggregates embedded into the network film. The intercalation of MTX between complementary base pairs of dsDNA lead to the increase of purine oxidation peaks due to the unwinding of the dsDNA. The dsDNA-electrochemical biosensor and the purinic homo-polynucleotide single stranded sequences of guanosine and adenosine, poly[G] and poly[A]-electrochemical biosensors, were used to investigate and understand the interaction between MTX and dsDNA.

Electrochemical assay for 20S proteasome activity and inhibition with anti-cancer drugs.

The majority of eukaryotic regulated protein turnover is performed by the proteasome, a multi-catalytic enzyme. Due to the fact that proteasome enzyme abnormal functioning was observed in different malignant cells, the proteasome is becoming a target for medical treatment. In order to evaluate the mechanisms of action of pharmaceutical compounds on proteasome enzyme inhibition, detecting and characterizing its activity is essential. An electrochemical assay that allows the monitoring of the chymotrypsin-like activity and inhibition of the 20S proteasome enzyme, based on the electrochemical detection of an electroactive compound released upon proteolysis of an adequate chymotrypsin-substrate is described. By employing differential pulse voltammetric measurement, the activity of the 20S proteasome enzyme was investigated for different incubation times of 20S with oligopeptide substrate as well as for different concentrations of substrate. Enzyme kinetic parameters were determined by voltammetry and the electrochemical assay compared with fluorescence spectroscopy. Electrochemical quartz crystal microbalance and atomic force microscopy were also used to investigate substrate interaction with the 20S proteasome and their adsorption at the electrode surface. Finally, the new electrochemical assay allowed to investigate the mechanisms of two different proteasome inhibitor drugs, bortezomib and oprozomib, underlying the applicability of the assay for understanding proteasome inhibitor action.

AFM nanometer surface morphological study of in situ electropolymerized neutral red redox mediator oxysilane sol-gel encapsulated glucose oxidase electrochemical biosensors.

Four different silica sol-gel films: methyltrimethoxysilane (MTMOS), tetraethoxysilane (TEOS), 3-aminopropyltriethoxysilane (APTOS) and 3-glycidoxypropyl-trimethoxysilane (GOPMOS) assembled onto highly oriented pyrolytic graphite (HOPG) were characterized using atomic force microscopy (AFM), due to their use in the development of glucose biosensors. The chemical structure of the oxysilane precursor and the composition of the sol-gel mixture both influenced the roughness, the size and the distribution of pores in the sol-gel films, which is relevant for enzyme encapsulation. The GOPMOS sol-gel film fulfils all the morphological characteristics required for good encapsulation of the enzyme, due to a smooth topography with very dense and uniform distribution of only small, 50 nm diameter, pores at the surface. APTOS and MTMOS sol-gel films developed small pores together with large ones of 300-400 nm that allow the leakage of enzymes, while the TEOS film formed a rough and incomplete network on the electrode, less suitable for enzyme immobilisation. GOPMOS sol-gel film with encapsulated glucose oxidase and poly(neutral red) redox mediator, prepared by in situ electropolymerization, were also morphologically characterized by AFM. The AFM results explain the variation of the stability in time, sensitivity and limit of detection obtained with different oxysilane sol-gel encapsulated glucose oxidase biosensors with redox mediator.

Electrochemistry of Alzheimer Disease Amyloid Beta Peptides.

Alzheimer's disease (AD) is a widespread form of dementia that is estimated to affect 44.4 million people worldwide. AD pathology is closely related to the accumulation of amyloid beta (Aß) peptides in fibrils and plagues, the small oligomeric intermediate species formed during the Aß peptides aggregation presenting the highest neurotoxicity. This review discusses the recent advances on the Aß peptides electrochemical characterization. The Aß peptides oxidation at a glassy carbon electrode occurs in one or two steps, depending on the amino acid sequence, length and content. The first electron transfer reaction corresponds to the tyrosine Tyr10 amino acid residue oxidation, and the second to all three histidine (His6, His13 and His14) and one methionine (Met35) amino acid residues. The Aß peptides aggregation and amyloid fibril formation are electrochemically detected via the electroactive amino acids oxidation peak currents decrease that occurs in a time dependent manner. The Aß peptides redox behaviour is correlated with changes in the adsorption morphology from initially random coiled structures, corresponding to the Aß peptide monomers in random coil or in α-helix conformations, to aggregates, protofibrils and two types of fibrils, corresponding to the Aß peptides in a ß-sheet configuration, observed by atomic force microscopy. Electrochemical studies of Aß peptides aggregation, mediated by the interaction with metal ions, particularly zinc, copper and iron, and different methodologies concerning the detection of Aß peptide biomarkers of AD in biological fluids, using electrochemical biosensors, are also discussed.

Electrochemical and AFM Characterization of G-Quadruplex Electrochemical Biosensors and Applications.

Guanine-rich DNA sequences are able to form G-quadruplexes, being involved in important biological processes and representing smart self-assembling nanomaterials that are increasingly used in DNA nanotechnology and biosensor technology. G-quadruplex electrochemical biosensors have received particular attention, since the electrochemical response is particularly sensitive to the DNA structural changes from single-stranded, double-stranded, or hairpin into a G-quadruplex configuration. Furthermore, the development of an increased number of G-quadruplex aptamers that combine the G-quadruplex stiffness and self-assembling versatility with the aptamer high specificity of binding to a variety of molecular targets allowed the construction of biosensors with increased selectivity and sensitivity. This review discusses the recent advances on the electrochemical characterization, design, and applications of G-quadruplex electrochemical biosensors in the evaluation of metal ions, G-quadruplex ligands, and other small organic molecules, proteins, and cells. The electrochemical and atomic force microscopy characterization of G-quadruplexes is presented. The incubation time and cations concentration dependence in controlling the G-quadruplex folding, stability, and nanostructures formation at carbon electrodes are discussed. Different G-quadruplex electrochemical biosensors design strategies, based on the DNA folding into a G-quadruplex, the use of G-quadruplex aptamers, or the use of hemin/G-quadruplex DNAzymes, are revisited.

Adsorption of synthetic homo- and hetero-oligodeoxynucleotides onto highly oriented pyrolytic graphite: atomic force microscopy characterization.

DNA adsorption on electrode surfaces is of fundamental interest for the development of DNA-based biosensors. The free adsorption of 10-mer synthetic oligodeoxynucleotides (ODNs) onto highly oriented pyrolytic graphite (HOPG) surfaces was studied using Magnetic AC mode atomic force microscopy (MAC Mode AFM). The mechanism of interaction of nucleic acids with carbon electrode surfaces was elucidated, using 10-mer synthetic homo- and hetero-ODNs sequences of known base sequences, because they allow clear interpretation of the experimental data. AFM images in air revealed different adsorption patterns and degree of HOPG surface coverage for the ODNs, and correlation with the individual structure and base sequence of each ODN molecule will be presented. The results demonstrated that the hydrophobic interactions with the HOPG hydrophobic surface explain the main adsorption mechanism, although other effects such as electrostatic and Van der Waals interactions may contribute to the free adsorption process. The ODNs interacted differently with the HOPG surface, according to the ODN sequence hydrophobic characteristics, being directly depending on the molecular mass, the hydrophobic character of the individual bases and on the secondary structure of the molecule. The importance of the type of base existent at the ODN chain extremities on the adsorption process was investigated and different adsorption patterns were obtained with ODN sequences composed by the same group of bases aligned in a different order.

Amyloid-ß peptides time-dependent structural modifications: AFM and voltammetric characterization.

The human amyloid beta (Aß) peptides, Aß1-40 and Aß1-42, structural modifications, from soluble monomers to fully formed fibrils through intermediate structures, were investigated, and the results were compared with those obtained for the inverse Aß40-1 and Aß42-1, mutant Aß1-40Phe(10) and Aß1-40Nle(35), and rat Aß1-40Rat peptide sequences. The aggregation was followed at a slow rate, in chloride free media and room temperature, and revealed to be a sequence-structure process, dependent on the physicochemical properties of each Aß peptide isoforms, and occurring at different rates and by different pathways. The fibrilization process was investigated by atomic force microscopy (AFM), via changes in the adsorption morphology from: (i) initially random coiled structures of ∼0.6 nm height, corresponding to the Aß peptide monomers in random coil or in α-helix conformations, to (ii) aggregates and protofibrils of 1.5-6.0 nm height and (iii) two types of fibrils, corresponding to the Aß peptide in a ß-sheet configuration. The reactivity of the carbon electrode surface was considered. The hydrophobic surface induced rapid changes of the Aß peptide conformations, and differences between the adsorbed fibrils, formed at the carbon surface (beaded, thin, <2.0 nm height) or in solution (long, smooth, thick, >2.0 nm height), were detected. Differential pulse voltammetry showed that, according to their primary structure, the Aß peptides undergo oxidation in one or two steps, the first step corresponding to the tyrosine amino acids oxidation, and the second one to the histidine and methionine amino acids oxidation. The fibrilization process was electrochemically detected via the decrease of the Aß peptide oxidation peak currents that occurred in a time dependent manner.