Formation of self-assembled nanoscale graphene/graphene oxide photomemristive heterojunctions using photocatalytic oxidation.

Photocatalytic oxidation of graphene with ZnO nanoparticles was found to create self-assembled graphene oxide/graphene (G/GO) photosensitive heterostructures, which can be used as memristors. Oxygen groups released during photodecomposition of water molecules on the nanoparticles under ultraviolet light, oxidized graphene, locally forming the G/GO heterojunctions with ultra-high density. The G/GO nanostructures have non-linear current-voltage characteristics and switch the resistance in the dark and under white light, providing four resistive states at room temperature. Photocatalytic oxidation of graphene with ZnO nanoparticles is proposed as an effective method for creating two-dimensional memristors with a photoresistive switching for ultra-high capacity non-volatile memory.

Strong Room-Temperature Ferromagnetism of MoS2 Compound Produced by Defect Generation.

Ferromagnetic materials have been attracting great interest in the last two decades due to their application in spintronics devices. One of the hot research areas in magnetism is currently the two-dimensional materials, transition metal dichalcogenides (TMDCs), which have unique physical properties. The origins and mechanisms of transition metal dichalcogenides (TMDCs), especially the correlation between magnetism and defects, have been studied recently. We investigate the changes in magnetic properties with a variation in annealing temperature for the nanoscale compound MoS2. The pristine MoS2 exhibits diamagnetic properties from low-to-room temperature. However, MoS2 compounds annealed at different temperatures showed that the controllable magnetism and the strongest ferromagnetic results were obtained for the 700 °C-annealed sample. These magnetizations are attributed to the unpaired electrons of vacancy defects that are induced by annealing, which are confirmed using Raman spectroscopy and electron paramagnetic resonance spectroscopy (EPR).

Enhanced Photoresponse of High Crystalline Bi2Se3 Thin-Films Using Patterned Substrates.

High-quality Bi2Se3 thin films with topological insulating properties at room temperature have recently attracted much attention as one of the promising materials for realizing innovative electronic and optoelectronic devices. Here, we report the high crystallinity growth of Bi2Se3 thin films on a patterned sapphire substrate (PSS) by using a vapor-phase transport deposition with minimizing thermal dissociation of Se atoms vaporized in Bi2Se3 powder. This PSS not only reduces the large dislocation of heterogeneously grown Bi2Se3 on a sapphire substrate but also induces enhanced light absorption in the visible to near-infrared (IR) ranges compared to Bi2Se3 on planar sapphire substrates. Thus, the Bi2Se3 thin film laterally grown on the PSS reveals uniform surface properties and high crystallinity in the rhombohedral lattice phase with a full width at half maximum of 0.06° for the XRD (003) peak. Also, the photoresponse of the fabricated IR conversion device using Bi2Se3/PSS heterostructure exhibits excellent performance and high reliability with no degradation after continuous switching. As a result, the device constructed with the Bi2Se3/PSS exhibits one order of magnitude higher NIR induced-photocurrent and 1-2 orders of magnitude faster photo-switching than that with Bi2Se3/Al2O3. Such an enhancement in the device performance of Bi2Se3/PSS is confirmed by the increased absorption spectra in visible and NIR ranges and the improved light absorption distribution.

Resistive Switching in Bigraphene/Diamane Nanostructures Formed on a La3Ga5SiO14 Substrate Using Electron Beam Irradiation.

Memristors, resistive switching memory devices, play a crucial role in the energy-efficient implementation of artificial intelligence. This study investigates resistive switching behavior in a lateral 2D composite structure composed of bilayer graphene and 2D diamond (diamane) nanostructures formed using electron beam irradiation. The resulting bigraphene/diamane structure exhibits nonlinear charge carrier transport behavior and a significant increase in resistance. It is shown that the resistive switching of the nanostructure is well controlled using bias voltage. The impact of an electrical field on the bonding of diamane-stabilizing functional groups is investigated. By subjecting the lateral bigraphene/diamane/bigraphene nanostructure to a sufficiently strong electric field, the migration of hydrogen ions and/or oxygen-related groups located on one or both sides of the nanostructure can occur. This process leads to the disruption of sp3 carbon bonds, restoring the high conductivity of bigraphene.

Photovoltaic device on a single ZnO nanowire p-n homojunction.

A photovoltaic device was successfully grown solely based on the single ZnO p-n homojunction nanowire. The ZnO nanowire p-n diode consists of an as-grown n-type segment and an in situ arsenic-doped p-type segment. This p-n homojunction acts as a good photovoltaic cell, producing a photocurrent almost 45 times larger than the dark current under reverse-biased conditions. Our results demonstrate that the present ZnO p-n homojunction nanowire can be used as a self-powered ultraviolet photodetector as well as a photovoltaic cell, which can also be used as an ultralow electrical power source for nanoscale electronic, optoelectronic and medical devices.

High performance langasite based SAW NO2 gas sensor using 2D g-C3N4@TiO2 hybrid nanocomposite.

Nitrogen dioxide (NO2) gas has emerged as a severe air pollutant that causes damages to the environment, human life and global ecosystems etc. However, the currently available NO2 gas sensors suffers from insufficient selectivity, sensitivity and long response times that impeding their practical applicability for room temperature (RT) gas sensing. Herein, we report a high performance langasite (LGS) based surface acoustic wave (SAW) RT NO2 gas sensor using 2-dimensional (2D) g-C3N4@TiO2 nanoplates (NP) with {001} facets hybrid nanocomposite as a chemical interface. The g-C3N4@TiO2 NP/LGS SAW device showed a significant negative frequency shift (∆f) of ~19.8 kHz which is 2.4 fold higher than that of the pristine TiO2 NP/LGS SAW sensor toward 100 ppm of NO2 at RT. In addition, the hybrid SAW device fascinatingly exhibited a fast response/recovery time with a low detection limit, high selectivity, and an effective long term stability toward NO2 gas. It also exhibited an enhanced and robust negative frequency shifts under various relative humidity conditions ranging from 20% to 80% for 100 ppm of NO2 gas. The high performance of the g-C3N4 @TiO2 NP/LGS SAW gas sensor can be attributed to the enhanced mass loading effect which was assisted by the large surface area, oxygen vacancies, OH and amine functional groups of the n-n hybrid heterojunction of g-C3N4@TiO2 NP that provide abundant active sites for the adsorption and diffusion of NO2 gas molecules. These results emphasize the significance of the integration of 2D materials with metal oxides for SAW based RT gas sensing technology holds great promise in environmental protection.

Formation of Diamane Nanostructures in Bilayer Graphene on Langasite under Irradiation with a Focused Electron Beam.

In the presented paper, we studied bilayer CVD graphene transferred to a langasite substrate and irradiated with a focused electron beam through a layer of polymethyl methacrylate (PMMA). Changes in the Raman spectra and an increase in the electrical resistance of bigraphene after irradiation indicate a local phase transition associated with graphene diamondization. The results are explained in the framework of the theory of a chemically induced phase transition of bilayer graphene to diamane, which can be associated with the release of hydrogen and oxygen atoms from PMMA and langasite due to the "knock-on" effect, respectively, upon irradiation of the structure with an electron beam. Theoretical calculations of the modified structure of bigraphene on langasite and the experimental evaluation of sp3-hybridized carbon fraction indicate the formation of diamane nanoclusters in the bigraphene irradiated regions. This result can be considered as the first realization of local tunable bilayer graphene diamondization.

ZnO Nanorod/Graphene Hybrid-Structures Formed on Cu Sheet by Self-Catalyzed Vapor-Phase Transport Synthesis.

High crystalline ZnO nanorods (NRs) on Zn pre-deposited graphene/Cu sheet without graphene transfer process have been fabricated by self-catalyzed vapor-phase transport synthesis. Here, the pre-deposited Zn metal on graphene not only serves as a seed to grow the ZnO NRs, but also passivates the graphene underneath. The temperature-dependent photoluminescence spectra of the fabricated ZnO NRs reveal a dominant peak of 3.88 eV at 10 K associated with the neutral-donor bound exciton, while the redshifted peak by bandgap shrinkage with temperature and electron-lattice interactions leads a strong emission at 382 nm at room temperature. The optical absorption of the ZnO NRs/graphene hetero-nanostructure at this ultraviolet (UV) emission is then theoretically analyzed to quantify the absorption amount depending on the ZnO NR distribution. By simply covering the ZnO NR/graphene/Cu structure with the graphene/glass as a top electrode, it is observed that the current-voltage characteristic of the ZnO NR/graphene hetero-nanojunction device exhibits a photocurrent of 1.03 mA at 3 V under a light illumination of 100 µW/cm2. In particular, the suggested graphene/ZnO NRs/graphene hybrid-nanostructure-based devices reveal comparable photocurrents at a bidirectional bias, which can be a promising platform to integrate 1D and 2D nanomaterials without complex patterning process for UV device applications.

Effective Modulation of Optical and Photoelectrical Properties of SnS2 Hexagonal Nanoflakes via Zn Incorporation.

Tin sulfides are promising materials in the fields of photoelectronics and photovoltaics because of their appropriate energy bands. However, doping in SnS2 can improve the stability and robustness of this material in potential applications. Herein, we report the synthesis of SnS2 nanoflakes with Zn doping via simple hydrothermal route. The effect of doping Zn was found to display a huge influence in the structural and crystalline order of as synthesized SnS2. Their optical properties attest Zn doping of SnS2 results in reduction of the band gap which benefits strong visible-light absorption. Significantly, enhanced photoresponse was observed with respect to pristine SnS2. Such enhancement could result in improved electronic conductivity and sensitivity due to Zn doping at appropriate concentration. These excellent performances show that Sn1-xZnxS2 nanoflakes could offer huge potential for nanoelectronics and optoelectronics device applications.

The effect of atmospheric doping on pressure-dependent Raman scattering in supported graphene.

Atmospheric doping of supported graphene was investigated by Raman scattering under different pressures. Various Raman spectra parameters were found to depend on the pressure and the substrate material. The results are interpreted in terms of atmospheric adsorption leading to a change in graphene charge carrier density and the effect of the substrate on the electronic and phonon properties of graphene. It was found that adsorption of molecules from the atmosphere onto graphene doped with nitrogen (electron doping) compensates for the electron charge. Furthermore, the atmosphere-induced doping drastically decreases the spatial heterogeneity of charge carriers in graphene doped with nitrogen, while the opposite effect was observed for undoped samples. The results of this study should be taken into account for the development of sensors and nanoelectronic devices based on graphene.

A patterned single layer graphene resistance temperature sensor.

Micro-fabricated single-layer graphenes (SLGs) on a silicon dioxide (SiO2)/Si substrate, a silicon nitride (SiN) membrane, and a suspended architecture are presented for their use as temperature sensors. These graphene temperature sensors act as resistance temperature detectors, showing a quadratic dependence of resistance on the temperature in a range between 283 K and 303 K. The observed resistance change of the graphene temperature sensors are explained by the temperature dependent electron mobility relationship (~T-4) and electron-phonon scattering. By analyzing the transient response of the SLG temperature sensors on different substrates, it is found that the graphene sensor on the SiN membrane shows the highest sensitivity due to low thermal mass, while the sensor on SiO2/Si reveals the lowest one. Also, the graphene on the SiN membrane reveals not only the fastest response, but also better mechanical stability compared to the suspended graphene sensor. Therefore, the presented results show that the temperature sensors based on SLG with an extremely low thermal mass can be used in various applications requiring high sensitivity and fast operation.

Highly Sensitive Flexible Photodetectors Based on Self-Assembled Tin Monosulfide Nanoflakes with Graphene Electrodes.

Tin monosulfide (SnS) nanostructures have attracted huge attention recently because of their high absorption coefficient, high photoconversion efficiencies, low energy cost, ease of deposition, and so on. Here, in this paper, we report on the low-cost hydrothermal synthesis of the self-assembled SnS nanoflake-like structures in terms of performance for the photodetectors. High-performance photodetectors were fabricated using SnS nanoflakes as active layers and graphene as the lateral electrodes. The SnS photodetectors exhibited excellent photoresponse properties with a high responsivity of 1.7 × 104 A/W and have fast response and recovery times. In addition, the photodetectors exhibited long-term stability and strong dependence of photocurrent on light intensity. These excellent characteristics were attributed to the larger surface-to-volume ratio of the self-assembled SnS nanoflakes and the effective separation of the photogenerated carriers at graphene/SnS interfaces. Additionally, a flexible photodetector based on SnS nanoflakes was also fabricated on a flexible substrate that demonstrated similar photosensitive properties. Furthermore, this study also demonstrates the potential of hydrothermal-processed SnS nanoflakes for high-performance photodetectors and their application in flexible low-cost optoelectronic devices.

Tunable UV-visible absorption of SnS2 layered quantum dots produced by liquid phase exfoliation.

4H-SnS2 layered crystals synthesized by a hydrothermal method were used to obtain via liquid phase exfoliation quantum dots (QDs), consisting of a single layer (SLQDs) or multiple layers (MLQDs). Systematic downshift of the peaks in the Raman spectra of crystals with a decrease in size was observed. The bandgap of layered QDs, estimated by UV-visible absorption spectroscopy and the tunneling current measurements using graphene probes, increases from 2.25 eV to 3.50 eV with decreasing size. 2-4 nm SLQDs, which are transparent in the visible region, show selective absorption and photosensitivity at wavelengths in the ultraviolet region of the spectrum while larger MLQDs (5-90 nm) exhibit a broad band absorption in the visible spectral region and the photoresponse under white light. The results show that the layered quantum dots obtained by liquid phase exfoliation exhibit well-controlled and regulated bandgap absorption in a wide tunable wavelength range. These novel layered quantum dots prepared using an inexpensive method of exfoliation and deposition from solution onto various substrates at room temperature can be used to create highly efficient visible-blind ultraviolet photodetectors and multiple bandgap solar cells.

Single ZnO nanocactus gas sensor formed by etching of ZnO nanorod.

Etching of materials on the nanoscale is a challenging but necessary process in nanomaterials science. Gas sensing using a single ZnO nanocactus (NC), which was prepared by facile isotropic nanoetching of zinc oxide nanorods (NR) grown by chemical vapor deposition (CVD) using an organic photoresist (PR) by a thermochemical reaction, is reported in this work. PR consists of carboxylic acid groups (COOH) and cyclopentanone (C5H8O), which can react with zinc and oxygen atoms, respectively, on the surface of a ZnO NR. The thermochemical reaction is controllable by varying the concentration of PR and reaction time. A gas sensor was fabricated using a single NC. Gas sensing was tested using different gases such as CH4, NH3 and carbon monoxide (CO). It was estimated that the surface area of a ZnO NC in the case of 50% PR was found to increase four-fold. When compared with a single ZnO NR gas sensor, the sensitivity of a ZnO NC was found to increase four-fold. This increase in sensitivity is attributed to the increase in surface area of the ZnO NC. The formed single ZnO NC gas sensor has good stability, response and recovery time.