Mature microRNA-binding protein QKI suppresses extracellular microRNA let-7b release.

Argonaute (AGO), a component of RNA-induced silencing complexes (RISCs), is a representative RNA-binding protein (RBP) known to bind with mature microRNA (miRNA) and is directly involved in post-transcriptional gene silencing. However, despite the biological significance of miRNA, the roles of other micro RNA-binding proteins (miRBPs) remain unclear in regulation of miRNA loading, dissociation from RISC, and extracellular release. In this study, we perform protein arrays to profile miRBPs and identify 118 RNA-binding proteins directly binding with miRNAs. Among those proteins, RBP quaking (QKI) inhibits extracellular release of mature microRNA let-7b by controlling the loading of let-7b into extracellular vesicles via additional miRBPs such as hnRNPD/AUF1 and hnRNPK. The enhanced extracellular release of let-7b after QKI depletion activates the Toll-like Receptor 7 (TLR7) and promotes the production of proinflammatory cytokines in recipient cells, leading to brain inflammation in mouse cortex. Thus, this study reveals contribution of QKI to the inhibition of brain inflammation via regulation of extracellular let-7b release.

Macroscopic Monograin Nano-Gyroid Thin Films in 4-inch Scale Through Shear-Rolling and Subsequent Solvent Annealing.

The gyroid structure from self-assembly is highly attractive for optical applications such as photonic crystals and metamaterials. However, due to the direction-dependent nature of these applications, achieving a monograin-level structure over a large area has remained challenging. In this study, the fabrication of unidirectionally oriented anisotropic nanocylinders of polystyrene-block-polydimethylsiloxane (PS-b-PDMS) is reported block copolymer thin films up to a 4-inch scale via a shear-rolling process, followed by solvent annealing to induce phase transition to nearly monograin gyroid structures. Grazing-incidence small-angle X-ray scattering (GISAXS) analysis and cross-sectional scanning electron microscope (SEM) images in the direction parallel to the shear-rolling direction reveal the preferential orientation with the (111) plane onto the YZ axis of the film, while only the (110) plane on the YZ axis of the film is observed in the perpendicular direction, with grain sizes approaching single-grain levels. For metamaterial applications, the PDMS domain is selectively removed, and gold is electroplated to produce monograin gold gyroid films.

Mature microRNA-binding protein QKI promotes microRNA-mediated gene silencing.

Although Argonaute (AGO) proteins have been the focus of microRNA (miRNA) studies, we observed AGO-free mature miRNAs directly interacting with RNA-binding proteins, implying the sophisticated nature of fine-tuning gene regulation by miRNAs. To investigate microRNA-binding proteins (miRBPs) globally, we analyzed PAR-CLIP data sets to identify RBP quaking (QKI) as a novel miRBP for let-7b. Potential existence of AGO-free miRNAs were further verified by measuring miRNA levels in genetically engineered AGO-depleted human and mouse cells. We have shown that QKI regulates miRNA-mediated gene silencing at multiple steps, and collectively serves as an auxiliary factor empowering AGO2/let-7b-mediated gene silencing. Depletion of QKI decreases interaction of AGO2 with let-7b and target mRNA, consequently controlling target mRNA decay. This finding indicates that QKI is a complementary factor in miRNA-mediated mRNA decay. QKI, however, also suppresses the dissociation of let-7b from AGO2, and slows the assembly of AGO2/miRNA/target mRNA complexes at the single-molecule level. We also revealed that QKI overexpression suppresses cMYC expression at post-transcriptional level, and decreases proliferation and migration of HeLa cells, demonstrating that QKI is a tumour suppressor gene by in part augmenting let-7b activity. Our data show that QKI is a new type of RBP implicated in the versatile regulation of miRNA-mediated gene silencing.

Enhanced Stability and Improved Oral Absorption of Enzalutamide with Self-Nanoemulsifying Drug Delivery System.

The purpose of this study is to develop and evaluate a self-nanoemulsifying drug delivery system (SNEDDS) to improve the oral absorption of poorly water-soluble enzalutamide (ENZ). Considering the rapid recrystallization of the drug, based on solubility and crystallization tests in various oils, surfactants and co-surfactants, Labrafac PG 10%, Solutol HS15 80%, and Transcutol P 10%, which showed the most stable particle size and polydispersity index (PDI) without drug precipitation, were selected as the optimal SNEDDS formulation. The optimized SNEDDS formulation showed excellent dissolution profiles for all the drugs released at 10 min of dissolution due to the increased surface area with a small particle size of approximately 16 nm. Additionally, it was confirmed to be stable without significant differences in physical and chemical properties for 6 months under accelerated conditions (40 ± 2 °C, 75 ± 5% RH) and stressed conditions (60 ± 2 °C). Associated with the high dissolutions of ENZ, pharmacokinetic parameters were also greatly improved. Specifically, the AUC was 1.9 times higher and the Cmax was 1.8 times higher than those of commercial products (Xtandi® soft capsule), resulting in improved oral absorption. Taken together with the results mentioned above, the SNEDDS could be an effective tool as a formulation for ENZ and other similar drugs.

Evaluation of chronic ankle instability and subtalar instability using the angle between the anterior talofibular ligament and calcaneofibular ligament.

PURPOSE: A series of studies have reported a change in the length or thickness of the anterior talofibular (ATFL) and calcaneofibular (CFL) ligaments in patients with chronic ankle instability. However, no study has examined the changes in the angle between the ATFL and CFL in patients diagnosed with chronic ankle instability. Therefore, this study analyzed the change in the angle between the ATFL and CFL in patients diagnosed with chronic ankle instability to confirm its relevance. METHODS: This retrospective study included 60 patients who had undergone surgery for chronic ankle instability. Stress radiographs comprising the anterior drawer test, varus stress test, Broden's view stress test, and magnetic resonance imaging (MRI) were performed in all patients. The angle between the ATFL and CFL was measured by indicating the vector at the attachment site, as seen on the sagittal plane. Three groups were classified according to the angle between the two ligaments measured by MRI: group I when the angle was > 90°, Group II when the angle was 71-90°, and Group III when the angle was ≤ 70°. The accompanying injuries to the subtalar joint ligament were analyzed via MRI. RESULTS: A comparison of the angles between the ATFL and CFL measured on MRI in Group I, Group II, and Group III with the angles measured in the operating room revealed a significant correlation. Broden's view stress test revealed a statistically significant difference among the three groups (p < 0.05). The accompanying subtalar joint ligament injuries differed significantly among the three groups (p < 0.05). CONCLUSION: The ATFL-CFL angle in patients with ankle instability is smaller than the average angle in ordinary people. Therefore, the ATFL-CFL angle might be a reliable and representative measurement tool to assess chronic ankle instability, and subtalar joint instability should be considered if the ATFL-CFL angle is 70° or less. LEVEL OF EVIDENCE: Level III.

Channel Selectivity of Satellite Transponders with the Antenna Combined with a Size-Reduced Metallic Waveguide Bandpass Filter Having Thin Metamaterial Resonators.

Global and intercontinental networking relies on satellite communication. Its wireless communication system always has antennas and their feed assembly comprising waveguides. This makes the satellite payload heavy and costly. In this paper, a novel method is proposed to effectively reduce the size of a waveguide bandpass filter (BPF). Because the metallic cavities make the conventional waveguide end up with a large geometry, especially for high-order BPFs, very compact waveguide-type resonators having metamaterial zeroth-order resonance (WG-ZOR) are designed on the cross-section of the waveguide and substituted for the cavities. While the cavities are half-wavelength resonators, the WG-ZOR is shorter than one eighth of a wavelength. A substantial reduction in size and weight of the waveguide filter is observed as the resonators are cascaded in series through coupling elements in the X-band much longer than K- or Ka-band. An X-band of 7.25~7.75 GHz is chosen to verify the method as the passband with attenuation of 40 dB at 7.00 GHz and 8.00 GHz as the roll-off in the stopband. The BPF is manufactured using the CNC milling technique. The design is carried out with geometrical parameters, not of the level of 10 µm, but the level of 100 µm, which is good for manufacturers but a big challenge for component designers. The measurement of the manufactured metal waveguide filter reveals that the passband has about ≤1 dB and ≤-15 dB as insertion loss and reflection coefficient and the stopband has ≤-40 dB as attenuation, which are in good agreement with the results of the circuit and simulation. The proposed filter has a length of 3.5 λg as the eighth-order BPF, but the conventional waveguide is 5 λg as the seventh-order BPF for the same area of the cross-section. This metamaterial BPF is combined with a horn antenna. The filter enables the wide-band antenna to distinguish the band of transmission from that of noise suppression. This channel selectivity is obviously observed by the filter integrated antenna test.

Effective Size Reduction of the Metallic Waveguide Bandpass Filter with Metamaterial Resonators and Its 3D-Printed Version.

In this paper, a novel method is proposed to effectively reduce the size of a waveguide bandpass filter (BPF). Because the metallic cavities make the conventional waveguide end up with a large geometry, especially for high-order BPFs, very compact waveguide-type resonators having metamaterial zeroth-order resonance (WG ZOR) are designed on the cross section of the waveguide and substituted for the cavities. While the cavities are half-wavelength resonators, the WG ZOR is shorter than one-eighth of a wavelength. A substantial reduction in the size and weight of the waveguide filter is observed as the resonators are cascaded in series through coupling elements in the X-band that is much longer than that in K- or Ka-bands. The proposed metamaterial filter is realized as a 3D-printed structure to be lighter and thus more suitable for low earth orbit (LEO) satellites. An X-band of 7.25-7.75 GHz is chosen to verify the method as the passband with an attenuation of 40 dB at 7.00 GHz and 8.00 GHz as the roll-off in the stopband. The BPF is manufactured in two ways, namely the CNC-milling technique and metal coating-added 3D printing. The design is carried out with a geometrical parameter of not 10-2 mm but rather 10-1 mm, which is good for manufacturers but challenging for component designers. The measurement of the manufactured metal waveguide filters reveals that the passband has about ≤1 dB and ≤-15 dB as the insertion loss and the reflection coefficient, respectively, and the stopband has an attenuation of ≤-40 dB, which are in good agreement with the results of the circuit and the simulation. The proposed filter has a length of 14 cm as the eighth-order BPF, but the conventional waveguide is 20 cm as the seventh-order BPF for the same area of the cross section.

Antagonism between splicing and microprocessor complex dictates the serum-induced processing of lnc-MIRHG for efficient cell cycle reentry.

Cellular quiescence and cell cycle reentry regulate vital biological processes such as cellular development and tissue homeostasis and are controlled by precise regulation of gene expression. The roles of long noncoding RNAs (lncRNAs) during these processes remain to be elucidated. By performing genome-wide transcriptome analyses, we identify differential expression of several hundreds of lncRNAs, including a significant number of the less-characterized class of microRNA-host-gene (MIRHG) lncRNAs or lnc-MIRHGs, during cellular quiescence and cell cycle reentry in human diploid fibroblasts. We observe that MIR222HG lncRNA displays serum-stimulated RNA processing due to enhanced splicing of the host nascent pri-MIR222HG transcript. The pre-mRNA splicing factor SRSF1 negatively regulates the microprocessor-catalyzed cleavage of pri-miR-222, thereby increasing the cellular pool of the mature MIR222HG Association of SRSF1 to pri-MIR222HG, including to a mini-exon, which partially overlaps with the primary miR-222 precursor, promotes serum-stimulated splicing over microRNA processing of MIR222HG Further, we observe that the increased levels of spliced MIR222HG in serum-stimulated cells promote the cell cycle reentry post quiescence in a microRNA-independent manner. MIR222HG interacts with DNM3OS, another lncRNA whose expression is elevated upon serum-stimulation, and promotes cell cycle reentry. The double-stranded RNA binding protein ILF3/2 complex facilitates MIR222HG:DNM3OS RNP complex assembly, thereby promoting DNM3OS RNA stability. Our study identifies a novel mechanism whereby competition between the splicing and microprocessor machinery modulates the serum-induced RNA processing of MIR222HG, which dictates cell cycle reentry.

TiO2 nanoflower photocatalysts: Synthesis, modifications and applications in wastewater treatment for removal of emerging organic pollutants.

Titanium dioxide (TiO2) has been considered as one of the most promising photocatalysts nanomaterials and is being used in a variety of fields of energy and environment under sunlight irradiation via photocatalysis. Highly efficient photocatalytic materials require the design of the proper structure with excellent morphology, interfacial structures, optical and surface properties, etc. Which are the key points to realize effective light-harvesting for photocatalytic applications. Hierarchical TiO2 based nanoflower structures (i.e., 3D nanostructures) possess such characteristics and have attracted much attention in recent years. The uniqueness of TiO2 nanoflowers (NFs) with a coarse texture and arranged structures demonstrates higher photocatalytic activity. This review deals with the hydrothermal synthesis of 3D TiO2 NFs and effect of shape/size as well as various key synthesis parameters to improve their optoelectronic and photocatalytic properties. Furthermore, to improve their photocatalytic properties, various strategies such as doping engineering and heterojunction/nanocomposite formation with other functional nanomaterials have been discussed followed by their potential applications in photocatalytic degradation of various emerging pollutants discharged into the wastewater from various sources. Importance of such 3D nanoarchitecutres and future research in other fields of current interest in environments are discussed.

A Chip Antenna for Bluetooth Earphones with Cross-Head Interference Tested from Received-Signal Sensing.

In this paper, a novel chip antenna and its function in wireless connectivity are presented for Bluetooth (BLT) earphones. The chip antenna is a metamaterial so compact (<λ/8), as the size of 4.9 × 13.0 × 2.0 mm3, that when it is mounted on the realistic PCB, it can be held in the enclosure of the BLT earphone. This setting does not degrade the resonance (S11 < −10 dB) of the proposed antenna. As two earphones in a pair are demanded to communicate with each other, one shares an RF signal with the other and they take turns as the master and slave. The received signal sensing is conducted with the latest model of human head-ear-phantom located between the earphones to mimic the real use-case and cross-head interference. Electromagnetic simulation of the antenna is done and verified by fabrication and measurement. Particularly, received-signal strength indications between the proposed antennas in the earphones are experimentally obtained as −67.5 dBm and −70 dBm without and with the head-ear-phantom, respectively, much greater than −120 dBm, the limit of detection, and implying acceptable connectivity and invulnerability over cross-head-interference problems.

An On-Film AMC Antenna Insert-Molded in Earbuds with Enhancement in In-Ear and In Situ Received-Signal Sensing.

In this paper, a novel thin and flexible antenna is proposed for earbuds to gain an improvement in their wireless signal-sensing capability as a film-based artificial magnetic conductor (AMC) structure. As antenna designs for earbuds face challenges of being embedded beneath the top cover of the earbud, conformal to curved surfaces, and very close to metallic ground and touch-panel parts, as well as scarce degrees of freedom from feeding conditions and functional degradation by human tissue, unlike conventional techniques such as quasi quarter-wavelength radiators on LDS and epoxy molding compounds (relatively thick and pricy), an antenna of a metal pattern on a film is made with another film layer as the AMC to mitigate problems of the antenna in a small and curved space of an insert-molded wireless device. The antenna was designed, fabricated, and embedded in earbud mockups to work for the 2.4 GHz Bluetooth RF link, and its functions were verified by RF and antenna measurement, showing that it could overcome the limitations in impedance matching with only lumped elements and poor radiation by the ordinary schemes. The input reflection coefficient and antenna efficiency were 10 dB and 9% better than other methods. In particular, the on-film AMC antenna (OFAA) presents robustness against deterioration by the human tissue, when it is placed in the ear phantom at the workbench and implemented in an in situ test using a large zorb ball mimicking a realistic sensing environment. This yielded an RSSI enhancement of 20-30 dB.

Data Augmentation of Backscatter X-ray Images for Deep Learning-Based Automatic Cargo Inspection.

Custom inspection using X-ray imaging is a very promising application of modern pattern recognition technology. However, the lack of data or renewal of tariff items makes the application of such technology difficult. In this paper, we present a data augmentation technique based on a new image-to-image translation method to deal with these difficulties. Unlike the conventional methods that convert a semantic label image into a realistic image, the proposed method takes a texture map with a special modification as an additional input of a generative adversarial network to reproduce domain-specific characteristics, such as background clutter or sensor-specific noise patterns. The proposed method was validated by applying it to backscatter X-ray (BSX) vehicle data augmentation. The Fréchet inception distance (FID) of the result indicates the visual quality of the translated image was significantly improved from the baseline when the texture parameters were used. Additionally, in terms of data augmentation, the experimental results of classification, segmentation, and detection show that the use of the translated image data, along with the real data consistently, improved the performance of the trained models. Our findings show that detailed depiction of the texture in translated images is crucial for data augmentation. Considering the comparatively few studies that have examined custom inspections of container scale goods, such as cars, we believe that this study will facilitate research on the automation of container screening, and the security of aviation and ports.

Investigation on Beam Alignment of a Microstrip-Line Butler Matrix and an SIW Butler Matrix for 5G Beamforming Antennas through RF-to-RF Wireless Sensing and 64-QAM Tests.

In this paper, an intuitive approach to assessing advantages of beamforming in 5G wireless communication is proposed as a novel try and practical demonstration of importance of alignment between the transmitter's and receiver's beams working in millimeter-wave frequency bands. Since the diffraction loss of millimeter-wave signals matters seriously in propagation, the effects of the misalignment and alignment between beams need to be checked for, which was conducted with a horn antenna and the 4 × 4 Butler matrix which mimic the relationship of the base station and handset antennas. Designing and using the microstrip-line and the substrate integrated waveguide (SIW) Butler matrices, RF-to-RF wireless connectivity between the horn and the microstrip line beamformer as case 1 and the horn and the SIW beamformer as case 2, concerning the changing angle of the beam from either of the two Butler matrices, was tested, showing over 12 dB enhancement in received power. This direct electromagnetic link test was accompanied by examining 64-QAM constellations for beam-angle changing from -30° to +30° for the two cases, where the error vector magnitude in the QAM-diagram becomes less than 10% by beam-alignment for the changing angle.

Aggregation-driven fluorescence quenching of imidazole-functionalized perylene diimide for urea sensing.

Stimuli-responsive self-assembly of functional amphiphilic molecules by specific chemical stimulants is a promising strategy for sensor application. Herein, we demonstrate a fast optical detection of urea in human urine by exploiting bolaform perylene diimide functionalized with imidazoles (PDI-Hm), whose aggregation is induced by urea hydrolysis. The hydroxides produced from the enzymatic urea hydrolysis deprotonate the imidazoles to reduce electrostatic repulsion between PDI-Hm molecules in a HCl-methanol mixture, thereby leading to aggregation and consequent fluorescence quenching. The molecular interaction of PDI-Hm was further scrutinized to understand the aggregation behavior driven by the screening of electrical repulsion. As an optical sensing probe, PDI-Hm displays a prompt response (<1 min) to hydroxide and detection limit of 0.4 mM for urea. PDI-Hm incorporating urease offers considerable selectivity toward urea among various components in human urine. The urea sensing accuracy of this PDI-Hm fluorescence chemosensor is comparable to that of a clinical method, showing 93.4% consistency. Furthermore, the PDI-Hm was fabricated into a gel film allowed for the fast screening of excessive urea in urine.

Adaptive 3D Model-Based Facial Expression Synthesis and Pose Frontalization.

Facial expressions are one of the important non-verbal ways used to understand human emotions during communication. Thus, acquiring and reproducing facial expressions is helpful in analyzing human emotional states. However, owing to complex and subtle facial muscle movements, facial expression modeling from images with face poses is difficult to achieve. To handle this issue, we present a method for acquiring facial expressions from a non-frontal single photograph using a 3D-aided approach. In addition, we propose a contour-fitting method that improves the modeling accuracy by automatically rearranging 3D contour landmarks corresponding to fixed 2D image landmarks. The acquired facial expression input can be parametrically manipulated to create various facial expressions through a blendshape or expression transfer based on the FACS (Facial Action Coding System). To achieve a realistic facial expression synthesis, we propose an exemplar-texture wrinkle synthesis method that extracts and synthesizes appropriate expression wrinkles according to the target expression. To do so, we constructed a wrinkle table of various facial expressions from 400 people. As one of the applications, we proved that the expression-pose synthesis method is suitable for expression-invariant face recognition through a quantitative evaluation, and showed the effectiveness based on a qualitative evaluation. We expect our system to be a benefit to various fields such as face recognition, HCI, and data augmentation for deep learning.

Photoinduced Intermolecular Electron Transfer Mediated by the Colloidal Tyrosyl Bolaamphiphile Assembly.

The self-assembly of tyrosyl bolaamphiphiles is exploited to create a colloidal protein-like host matrix, upon which sacrificial electron-donor molecules associate to create a photosystem II (PSII) mimetic electron-relay system. This system harnesses the tyrosine phenol groups abundant on the surface of the assemblies to mediate photoinduced intermolecular electron transfer. Compared with the l-tyrosine molecules, the tyrosyl bolaamphiphile assembly facilitates electron transfer from the sacrificial electron donor to the oxidized photosensitizer. The enhanced electron relay is likely to be driven by the host function of the assembly associated with the sacrificial electron donor and by the suppression of the oxidative cross-linking of phenoxyl radicals. The tyrosyl bolaamphiphile assembly is advantageous in the construction of a PSII mimetic system with a protein-like nature and displaying biochemical functions.

Learning, memory deficits, and impaired neuronal maturation attributed to acrylamide.

Acrylamide (ACR) is a neurotoxin known to produce neurotoxicity characterized by ataxia, skeletal muscle weakness, cognitive impairment, and numbness of the extremities. Previously, investigators reported that high-dose (50 mg/kg) ACR impaired hippocampal neurogenesis and increased neural progenitor cell death; however, the influence of subchronic environmentally relevant low dose-(2, 20, or 200 µg/kg) ACRs have not been examined in adult neurogenesis or cognitive function in mice. Accordingly, the aim of the present study was to investigate whether low-dose ACR adversely affected mouse hippocampal neurogenesis and neurocognitive functions. Male C57BL/6 mice were orally administered vehicle or ACR at 2, 20, or 200 µg/kg/day for 4 weeks. ACR did not significantly alter the number of newly generated cells or produce neuroinflammation or neuronal loss in hippocampi. However, behavioral studies revealed that 200 µg/kg ACR produced learning and memory impairment. Furthermore, incubation of ACR with primary cultured neurons during the developmental stage was found to delay neuronal maturation without affecting cell viability indicating the presence of developmental neurotoxicity. These findings indicate that although exposure to in vivo low-dose ACR daily for 4 weeks exerted no apparent marked effect on hippocampal neurogenesis, in vitro observations in primary cultured neurons noted adverse effects on learning and memory impairment suggestive of neurotoxic actions.

Interior-filled self-assemblies of tyrosyl bolaamphiphiles regulated by hydrogen bonds.

Bolaamphiphilic molecules with tyrosyl end groups formed interior-filled spherical self-assemblies, which are distinct from the vesicular or tubular structures of other similar peptidic bolaamphiphile assemblies reported in the literature. In this study, the self-assembly mechanism of these tyrosyl bolaamphiphiles was investigated taking into consideration the solvent effects on the molecular interaction forces using molecular modeling. The dissipative particle dynamics simulation of an aqueous tyrosyl bolaamphiphile solution suggested that the interior-filled assemblies were produced by a solvent-regulated assembly of small aggregates of bolaamphiphiles. These small aggregates were generated by hydrophobic interactions at an early stage, and then further assembled to form large spherical assemblies through intermolecular forces, including hydrogen bonds between the intermediate aggregates. Additional experiments and density functional theory calculations based on solvent variations proved that smaller assembled structures could be obtained by disrupting the hydrogen bonds between the intermediates. The assembly mechanism of these peptidic bolaamphiphiles afforded a facile way to create condensed supramolecular structures with controlled sizes.

Graphene oxide as an emerging sole adsorbent and photocatalyst: Chemistry of synthesis and tailoring properties for removal of emerging contaminants.

Contaminants of emerging concern (CEC) contain a wide range of compounds, such as pharmaceutical waste, pesticides, herbicides, industrial chemicals, organic dyes, etc. Their presence in the surrounding has extensive and multifaceted effects on human health as they have the potential to persist in the environment, accumulate in biota, and disrupt ecosystems. In this regard, various remediation methods involving different kind of functional nanomaterials with unique properties have been developed. The functional nanomaterials can provide several mechanisms for water pollutant removal, such as adsorption, catalysis, and disinfection, in a single platform. Graphene oxide (GO) is a two-dimensional carbon-based material that has an extremely large surface area and a large number of active sites. Recent advances in synthesising GO have shown great progress in tailoring its various physiochemical, optical, surface, structural properties etc., making it better adsorbent and photocatalysts. In this review, sole adsorbent and standalone photocatalytic performances of GO for the removal of CEC have been discussed in light of tailoring its adsorption and photocatalytic properties through novel synthesis routes and optimizing synthesis parameters. This review also examines various models describing the structure of GO and its surface/structural modifications for improved adsorption and photocatalytic properties. The article provides valuable information for the production of efficient and cost-effective GO-based sole adsorbents and photocatalysts as compared to the traditional materials. Furthermore, future prospective and challenges for sole GO nanostructures to compete with traditional adsorbents and photocatalysts have been discussed providing interesting avenues for future research.

Dapagliflozin Reduces Urinary Kidney Injury Biomarkers in Chronic Kidney Disease Irrespective of Albuminuria Level.

The beneficial effects of sodium-glucose cotransporter 2 (SGLT2) inhibitors in patients with chronic kidney disease (CKD) with low albuminuria levels have not been established. This study aimed to compare the effects of dapagliflozin on kidney injury biomarkers in patients with CKD stratified by albuminuria level. We prospectively enrolled healthy volunteers (HVs; n = 20) and patients with CKD (n = 54) with and without diabetes mellitus. Patients with CKD were divided into two age-matched and sex-matched subgroups according to urinary albumin-creatinine ratio (uACR) levels (<300 mg/g and ≥300 mg/g). The CKD group received dapagliflozin (10 mg/day). Urine samples were collected before treatment and after 3 and 6 months of dapagliflozin. Urinary kidney injury molecule-1 (KIM-1), interleukin-1ß (IL-1ß), and mitochondrial DNA nicotinamide adenine dinucleotide dehydrogenase subunit-1 (mtND1) copy number were measured. The estimated glomerular filtration rate (eGFR) of patients with CKD was lower than that of HVs (P < 0.001). During the study period, eGFR decreased and uACR did not change in the CKD group. Kidney injury markers were significantly elevated in patients with CKD compared with those in HVs. Dapagliflozin reduced urinary KIM-1, IL-1ß, and mtDNA copy number in patients with CKD after 6 months of treatment. In further, the levels of urinary KIM-1 and IL-1ß, patients with CKD decreased after 6 months of dapagliflozin treatment regardless of albuminuria level. Dapagliflozin reduced urinary kidney injury biomarkers in patients with CKD, regardless of albuminuria level. These findings suggest that SGLT2 inhibitors may also attenuate the progression of low albuminuric CKD.