Influence of Intermolecular Structural Effects on Radiative Efficiency in Xanthene-Based Carboranyl Luminophores.

Two o-carboranes with (i) 9,9-dimethyl-9H-xanthene and (ii) spiro[fluorene-9,9'-xanthene] moieties (XTC and sXTC, respectively) were prepared and characterized. Single X-ray crystallography analysis revealed the presence of intermolecular hydrogen bonds in XTC crystals. Although both compounds did not exhibit emission in tetrahydrofuran solutions at 298 K, intense bluish emission was observed in the solid states and frozen tetrahydrofuran solutions at 77 K. According to the results of theoretical calculations, this emission originated from an intramolecular charge transfer (ICT) transition with the o-carborane moiety. The absolute quantum efficiency (Φem) of the ICT-based emission in the film state equaled 49% for XTC and 20% for sXTC but was as high as 90% for the crystals of both compounds. The crystal structures of XTC and sXTC revealed that the o-carboranyl-appended phenyl plane was orthogonal (85-89°) to the carbon-carbon bonding axis in the o-carborane, indicating the existence of a strong exo-π-interaction, which was identified as the structural basis for the ICT-based transition. These results implied that the intermolecular structural effect of XTC in the randomly aggregated solid state (film) helped maintain the above orthogonality and, hence, the high efficiency from the ICT radiative mechanism. Thus, we concluded that the ICT radiative efficiency of o-carboranyl luminophores in the aggregated solid state can be controlled by specific intermolecular interactions and that the molecular geometric design inducing this feature can be important for developing highly efficient carboranyl luminophores.

Splitting of Hydrogen Atoms into Proton-Electron Pairs at BaO-Ru Interfaces for Promoting Ammonia Synthesis under Mild Conditions.

Ru catalysts promoted with alkali and alkaline earth have shown superior ammonia (NH3) synthesis activities under mild conditions. Although these promoters play a vital role in enhancing catalytic activity, their function has not been clearly understood. Here, we synthesize a series of Ba-Ru/MgO catalysts with an optimal Ru particle size (∼2.3 nm) and tailored BaO-Ru interfacial structures. We discover that the promoting effect is created through the separate storage of H+/e- pairs at the BaO-Ru interface. Chemisorbed H atoms on Ru dissociate into H+/e- pairs at the BaO-Ru interface, where strongly basic, nonreducible BaO selectively captures H+ while leaving e- on Ru. The resulting electron accumulation in Ru facilitates N2 activation via enhanced π-backdonation and inhibits hydrogen poisoning during NH3 synthesis. Consequently, the formation of intimate BaO-Ru interface without an excessive loss of accessible Ru sites enables the synthesis of highly active catalysts for NH3 synthesis.

A new swallowing supplement for dysphagia in patients with Parkinson's disease.

Dysphagia associated with Parkinson's disease (PD) affects the mortality and quality of life of patients with PD. Avoiding aspiration and maintaining swallowing ability are among the concerns regarding PD care. Therefore, we developed a swallowing supplement for easier swallowing and tolerability in patients with PD. Thirty patients with PD and 50 healthy controls were enrolled and their swallowing function measured using the videofluoroscopic swallowing study (VFSS) and several dysphagia scales. The Unified Parkinson's Disease Rating Scale motor scores, Hoehn and Yahr stage, and levodopa doses were evaluated in patients with PD. The VFSS and survey were used to assess the viscosity, color, taste, nutrition, safety, and tolerability of the swallowing supplement. The MMSE score, serum albumin, and hemoglobin levels, and oral conditions were worse in the PD group than in the control group. Compared with controls, patients with PD had significantly lower total and sub-item scores of the swallowing quality of life (swal-QoL). Using commercialized yogurt, the pharyngeal delay time (PDT) and the modified penetration aspiration scale were higher in the PD group than in the control group. The swallowing supplement significantly shortened the PDT and pharyngeal transit time (PTT). Moreover, compared with commercialized yogurt, it improved pharyngeal wall coating, PTT, and aspiration in the videofluoroscopic dysphagia subscales. The survey scores were above average to good in the "easy swallowing" and "pharyngeal residual sense" items and tolerable in the remaining 6 preference items. This swallowing supplement could prevent aspiration and dysphagia complications in patients with PD.

Deep Learning-Based Stroke Disease Prediction System Using Real-Time Bio Signals.

The emergence of an aging society is inevitable due to the continued increases in life expectancy and decreases in birth rate. These social changes require new smart healthcare services for use in daily life, and COVID-19 has also led to a contactless trend necessitating more non-face-to-face health services. Due to the improvements that have been achieved in healthcare technologies, an increasing number of studies have attempted to predict and analyze certain diseases in advance. Research on stroke diseases is actively underway, particularly with the aging population. Stroke, which is fatal to the elderly, is a disease that requires continuous medical observation and monitoring, as its recurrence rate and mortality rate are very high. Most studies examining stroke disease to date have used MRI or CT images for simple classification. This clinical approach (imaging) is expensive and time-consuming while requiring bulky equipment. Recently, there has been increasing interest in using non-invasive measurable EEGs to compensate for these shortcomings. However, the prediction algorithms and processing procedures are both time-consuming because the raw data needs to be separated before the specific attributes can be obtained. Therefore, in this paper, we propose a new methodology that allows for the immediate application of deep learning models on raw EEG data without using the frequency properties of EEG. This proposed deep learning-based stroke disease prediction model was developed and trained with data collected from real-time EEG sensors. We implemented and compared different deep-learning models (LSTM, Bidirectional LSTM, CNN-LSTM, and CNN-Bidirectional LSTM) that are specialized in time series data classification and prediction. The experimental results confirmed that the raw EEG data, when wielded by the CNN-bidirectional LSTM model, can predict stroke with 94.0% accuracy with low FPR (6.0%) and FNR (5.7%), thus showing high confidence in our system. These experimental results demonstrate the feasibility of non-invasive methods that can easily measure brain waves alone to predict and monitor stroke diseases in real time during daily life. These findings are expected to lead to significant improvements for early stroke detection with reduced cost and discomfort compared to other measuring techniques.

Multi-Compartmental Hydrogel Microparticles Fabricated by Combination of Sequential Electrospinning and Photopatterning.

Multi-compartmental non-spherical hydrogel microparticles were fabricated by combining electrospinning and photopatterning. Sequential electrospinning produced multi-layered fiber matrices with different composition in which each layer became a compartment of the particle. Photopatterning of the hydrogel in the presence of the multi-layered fiber matrix generated multi-compartmental microparticles with different vertical functionalities. While the shapes of the hydrogel microparticles were determined by the design of the photomask, the chemical properties and size of each compartment were independently controlled by changing the molecules incorporated into each fiber matrix and the electrospinning times, respectively. The resultant multi-compartmental hydrogel microparticles could carry out not only the release of different growth factors with independent kinetics but also binding of multiple targets at different compartments.

Random-graft polymer-directed synthesis of inorganic mesostructures with ultrathin frameworks.

A widely employed route for synthesizing mesostructured materials is the use of surfactant micelles or amphiphilic block copolymers as structure-directing agents. A versatile synthesis method is described for mesostructured materials composed of ultrathin inorganic frameworks using amorphous linear-chain polymers functionalized with a random distribution of side groups that can participate in inorganic crystallization. Tight binding of the side groups with inorganic species enforces strain in the polymer backbones, limiting the crystallization to the ultrathin micellar scale. This method is demonstrated for a variety of materials, such as hierarchically nanoporous zeolites, their aluminophosphate analogue, TiO2 nanosheets of sub-nanometer thickness, and mesoporous TiO2, SnO2, and ZrO2. This polymer-directed synthesis is expected to widen our accessibility to unexplored mesostructured materials in a simple and mass-producible manner.

The biochar derived from Spirulina platensis for the adsorption of Pb and Zn and enhancing the soil physicochemical properties.

Microalgae can be collected in large quantities and hold significant potential for environmental remediation, offering a cost-effective solution. This study explores the use of Spirulina platensis (SP) as feedstock for biochar production. SP contains abundant nitrogen-rich components, such as proteins, which can serve as nitrogen sources. We prepared SP-derived biochar through pyrolysis for the adsorption of Pb and Zn from aqueous solutions and used it as an amending agent to remediate heavy metal-contaminated agricultural soil. Pyrolysis of proteins in SP introduces nitrogen-functional groups, resulting in nitrogen-doped biochar. We investigated the surface chemical behavior of thermally treated SP using X-ray photoelectron spectroscopy and Fourier-transform infrared spectroscopy. Surface analysis revealed the presence of pyridine-N and pyrrole-N from protein pyrolysis products. The study also demonstrated that these functional groups affect interactions with heavy metals. Batch experiments examined the effects of pH and initial concentration on the adsorption of Pb and Zn using SP400 and SP600. Both types of biochar showed satisfactory performance in adsorbing Pb and Zn. The effect of SP400 and SP600 on the removal of Pb and Zn through the physicochemical properties and surface functional groups was investigated. Analysis of SP400 and SP600 highlighted that electrostatic interactions, cation exchange, complexation, and mineral precipitation contributed to Pb and Zn adsorption. The study concludes that SP-derived biochar, particularly SP600, is effective for immobilizing Pb and Zn in contaminated agricultural soil, with SP600 showing superior performance.

Congo red dye degradation using Fe-containing mineral as a reactive material derived from waste foundry dust.

This study investigated the applicability of industrial waste. The high affinity of Fe-based products is widely used for industrial effluents because of their capability to oxidize contaminants. Waste foundry dust (WFD) is an Fe oxide that has been investigated as a potential reactive material that causes the generation of reactive oxidants. We aimed to investigate the physicochemical properties of WFD and the feasibility in the Fenton oxidation process. The WFD was used as a catalyst for removing Congo red (CR), to evaluate the generation of •OH and dissolution of Fe during the oxidation process. The linkage of •OH generation by WFD with eluted Fe(II) through the Fe dissolution was found. The Fenton oxidation reaction, CR degradation was affected by H2O2 concentration, initial pH, WFD dosage, initial CR concentration, and coexisting anions. The CR degradation efficiency increased with an increase in H2O2 concentration and WFD dosage. In addition, chloride and sulfate in solution promoted CR degradation, whereas carbonate had a negative effect on the Fenton oxidation process. The elution of Fe promotes CR degradation, over three reuse cycles, the degradation performance of the CR decreased from 100 to 81.1%. For the Fenton oxidation process, •OH generation is linked to Fe redox cycling, the surface passivation and Fe complexes interrupted the release of reactive oxidants, which resulted in the degradation of the CR decreased. This study proposed that WFD can serve as catalysts for the removal of CR.

Investigation on the Initial Stage of the Dehydration Process in Mg(OH)2 by Density Functional Theory Calculations.

Mg(OH)2/MgO has been attracting considerable interest as a viable candidate for thermochemical heat storage materials, particularly within the temperature range of 200-400 °C. Nonetheless, the typical dehydration temperature of Mg(OH)2, which occurs within the 300-400 °C range, needs to be reduced to enhance its effectiveness in various applications for thermal energy storage. While several studies have shown that heterospecies doping can lower the dehydration temperature, the fundamental mechanism underlying this effect still remains unclear. Here, we employed density functional theory calculations to elucidate the dehydration mechanism of Mg(OH)2, with a particular focus on the initial stage of the dehydration that determines the temperature beginning the reaction. Our findings indicate that the formation of water molecules on the (001) surface is critical in the early stages of the dehydration. This discovery provides a comprehensive explanation for the role of dopants (Na, Li, or LiCl) in reducing the dehydration temperature by decreasing the formation energy of paired H and OH defects and the migration barrier of H on the surface. The present study will significantly advance the development of novel dopants for Mg(OH)2, facilitating a lower dehydration temperature and, thereby, increasing its suitability for heat storage applications.

Spirulina platensis Immobilized Alginate Beads for Removal of Pb(II) from Aqueous Solutions.

Microalgae contain a diversity of functional groups that can be used as environmental adsorbents. Spirulina platensis is a blue-green microalga that comprises protein-N, which is advantageous for use in nitrogen-containing biomass as adsorbents. This study aimed to enhance the adsorption properties of alginate hydrogels by employing Spirulina platensis. Spirulina platensis was immobilized on sodium alginate (S.P@Ca-SA) via crosslinking. The results of field-emission scanning electron microscopy, Fourier-transform infrared, and X-ray photoelectron spectroscopy analyses of the N-containing functional groups indicated that Spirulina platensis was successfully immobilized on the alginate matrix. We evaluated the effects of pH, concentration, and contact time on Pb(II) adsorption by S.P@Ca-SA. The results demonstrated that S.P@Ca-SA could effectively eliminate Pb(II) at pH 5, reaching equilibrium within 6 h, and the maximum Pb(II) sorption capacity of S.P@Ca-SA was 87.9 mg/g. Our results indicated that S.P@Ca-SA fits well with the pseudo-second-order and Freundlich models. Compared with Spirulina platensis and blank alginate beads, S.P@Ca-SA exhibited an enhanced Pb(II) adsorption efficiency. The correlation implies that the amino groups act as adsorption sites facilitating the elimination of Pb(II).

Water-stable, biocompatible, and highly luminescent perovskite nanocrystals-embedded fiber-based paper for anti-counterfeiting applications.

In this study, we present a promising and facile approach toward the fabrication of non-toxic, water-stable, and eco-friendly luminescent fiber paper composed of polycaprolactone (PCL) polymer and CsPbBr3@SiO2 core-shell perovskite nanocrystals. PCL-perovskite fiber paper was fabricated using a conventional electrospinning process. Transmission electron microscopy (TEM) clearly revealed incorporation of CsPbBr3@SiO2 nanocrystals in the fibers, while scanning electron microscopy (SEM) demonstrated that incorporation of CsPbBr3@SiO2 nanocrystals did not affect the surface and diameter of the PCL-perovskite fibers. In addition, thermogravimetric analysis (TGA) and contact angle measurements have demonstrated that the PCL-perovskite fibers exhibit excellent thermal and water stability. The fabricated PCL-perovskite fiber paper exhibited a bright green emission centered at 520 nm upon excitation by ultra-violet (UV) light (374 nm). We have demonstrated that fluorescent PCL-perovskite fiber paper is a promising candidate for anti-counterfeiting applications because various patterns can be printed on the paper, which only become visible after exposure to UV light at 365 nm. Cell proliferation tests revealed that the PCL-perovskite fibers are cytocompatibility. Consequently, they may be suitable for biocompatible anti-counterfeiting. The present study reveals that PCL-perovskite fibers may pave way toward next generation biomedical probe and anti-counterfeiting applications.

Effect of water filtration infrared-A (wIRA) sauna on inorganic ions excreted through sweat from the human body.

Sweat discharged as a result of exposure to sauna plays an important role in removing inorganic ions accumulated in the body, including heavy metals. In this study, inorganic ions (toxic and nutrient elements) excreted in the form of sweat from the body using a water-filtered infrared-A (wIRA) sauna were determined using inductively coupled plasma sector field mass spectrometry. The analyzed elements included eight toxic elements (Al, As, Be, Cd, Ni, Pb, Ti, and Hg) and 10 nutrient elements (Ca, Co, Cr, Cu, Fe, Mg, Mn, Se, V, and Zn), and their correlations were determined. Analysis of the sweat obtained from 22 people using the wIRA sauna showed a higher inorganic ion concentration than that obtained from conventional activities, such as exercise or the use of wet sauna, and the concentration of toxic elements in sweat was higher in females than in males. Correlation analysis of the ions revealed a correlation between the discharge of toxic elements, such as As, Be, Cd, and Ni, and discharge of Se and V, and Ni was only correlated with Mn. This study provides fundamental information on nutritional element supplementation when using wIRA sauna for detoxification.

One-Pot Synthesis of Double-Network PEG/Collagen Hydrogel for Enhanced Adipogenic Differentiation and Retrieval of Adipose-Derived Stem Cells.

Hydrogels are widely used in stem cell therapy due to their extensive tunability and resemblance to the extracellular matrix (ECM), which has a three-dimensional (3D) structure. These features enable various applications that enhance stem cell maintenance and function. However, fast and simple hydrogel fabrication methods are desirable for stem cells for efficient encapsulation and to reduce adverse effects on the cells. In this study, we present a one-pot double-crosslinked hydrogel consisting of polyethylene glycol (PEG) and collagen, which can be prepared without the multi-step sequential synthesis of each network, by using bio-orthogonal chemistry. To enhance the adipogenic differentiation efficiency of adipose-derived stem cells (ADSCs), we added degradable components within the hydrogel to regulate matrix stiffness through cell-mediated degradation. Bio-orthogonal reactions used for hydrogel gelation allow rapid gel formation for efficient cell encapsulation without toxic by-products. Furthermore, the hybrid network of synthetic (PEG) and natural (collagen) components demonstrated adequate mechanical strength and higher cell adhesiveness. Therefore, ADSCs grown within this hybrid hydrogel proliferated and functioned better than those grown in the single-crosslinked hydrogel. The degradable elements further improved adipogenesis in ADSCs with dynamic changes in modulus during culture and enabled the retrieval of differentiated cells for potential future applications.

Unexpected Penetration of CO Molecule into Zeolitic Micropores Almost Plugged by CuCl via π-Complexation of CO-CuCl.

Carbon monoxide (CO) is a key reactant in several Fischer-Tropsch processes, including those used in light olefin and methanol syntheses. However, it is highly toxic and causes serious poisoning of noble metal catalysts. Thus, a solid adsorbent that can selectively capture CO, especially at low concentrations, is required. In this study, zeolite Y-based adsorbents in which Cu(I) ions occupy the supercage cation sites (CuCl/Y) are prepared via solid-state ion exchange. Volumetric adsorption measurements reveal that the Cu(I) ions significantly enhance CO adsorption in the low-pressure range by π-complexation. Furthermore, unexpected molecular sieving behavior, with extremely high CO/CO2 selectivity, is observed when excess CuCl homogeneously covers the zeolite pore structures. Thus, although CO has a larger kinetic diameter, it can penetrate the zeolite supercage while smaller molecules (i.e., Ar and CO2) cannot. Density functional theory calculations reveal that CO molecules can remain adsorbed in pseudoblocked pores by CuCl, thanks to the strong interaction of C 2p and Cu 3d states, resulting in the high CO/CO2 selectivity. One of the prepared adsorbents, CuCl/Y with 50 wt % CuCl, is capable of selectively capturing 3.04 mmol g-1 of CO with a CO/CO2 selectivity of >3370.

Intracrystalline diffusion in mesoporous zeolites.

Specially synthesized extra-large crystallites of zeolite LTA with intentionally added mesoporosity are used for an in-depth study of guest diffusion in hierarchical nanoporous materials by the pulsed field gradient NMR technique. Using propane as a guest molecule, intracrystalline mass transfer is demonstrated to be adequately described by a single effective diffusivity resulting from the weighted average of the diffusivities in the two (micro- and meso-) pore spaces. Gas-kinetic order-of-magnitude estimates of the diffusivities are in satisfactory agreement with the experimental data and are thus shown to provide a straightforward means for predicting and quantifying the benefit of hierarchically structured nanoporous materials in comparison with their purely microporous equivalent.

Removal of Methyl Red from Aqueous Solution Using Polyethyleneimine Crosslinked Alginate Beads with Waste Foundry Dust as a Magnetic Material.

In this study, a cost-effective adsorbent based on sodium alginate (SA) with waste foundry dust (WFD) was fabricated for the removal of methyl red (MR) from aqueous media. However, the utilization of WFD/SA beads to remove anionic dyes (such as MR) from effluents has limitations associated with their functional groups. To improve the adsorption performance, WFD/SA-polyethyleneimine (PEI) beads were formed via PEI crosslinking onto WFD/SA beads, which could be attributed to the formation of amide bonds from the carboxyl and amino groups due to the change of N-H bonds in the reaction. The Fourier transform infrared (FTIR) and X-ray photoelectron spectroscopy (XPS) results indicated that PEI was crosslinked on the WFD/SA via a chemical reaction. In the FTIR spectra of WFD/SA-PEI, peaks of the -COO (asymmetric) stretching vibration shifted to 1598 and 1395 cm-1, which could be attributed to the hydrogen-bonding effect of the N-H groups in PEI. In the N1s spectrum, three deconvoluted peaks were assigned to N in -N= (398.2 eV), -NH/-NH2 (399.6 eV), and NO2 (405.2 eV). WFD/SA-PEI beads were assessed and optimized for aqueous MR adsorption. The WFD/SA-PEI beads showed a high removal efficiency for MR (89.1%) at an initial concentration of 1000 mg/L, and presented a maximum MR adsorption capacity of 672.7 mg/g MR. The adsorption process showed a good fit with the pseudo-second-order kinetic model and the Langmuir adsorption isotherm model. The amino and hydroxyl groups in the WFD/SA-PEI beads facilitate strong hydrogen bonding and electrostatic interactions. Moreover, these WFD/SA-PEI beads were easily recovered after the adsorption process.

Remediation of Toxic Heavy Metal Contaminated Soil by Combining a Washing Ejector Based on Hydrodynamic Cavitation and Soil Washing Process.

Based on the features of hydrodynamic cavitation, in this study, we developed a washing ejector that utilizes a high-pressure water jet. The cavitating flow was utilized to remove fine particles from contaminated soil. The volume of the contaminants and total metal concentration could be correlated to the fine-particle distribution in the contaminated soil. These particles can combine with a variety of pollutants. In this study, physical separation and soil washing as a two-step soil remediation strategy were performed to remediate contaminated soils from the smelter. A washing ejector was employed for physical separation, whereas phosphoric acid was used as the washing agent. The particles containing toxic heavy metals were composed of metal phase encapsulated in phyllosilicates, and metal phase weakly bound to phyllosilicate surfaces. The washing ejector involves the removal of fine particles bound to coarse particles and the dispersion of soil aggregates. From these results we determined that physical separation using a washing ejector was effective for the treatment of contaminated soil. Phosphoric acid (H3PO4) was effective in extracting arsenic from contaminated soil in which arsenic was associated with amorphous iron oxides. Thus, the obtained results can provide useful information and technical support for field soil washing for the remediation of soil contaminated by toxic heavy metals through emissions from the mining and ore processing industries.

Removal of Inorganic Salts in Municipal Solid Waste Incineration Fly Ash Using a Washing Ejector and Its Application for CO2 Capture.

This study investigated the effects of washing equipment for inorganic salts, such as NaCl, KCl, and CaClOH, to decontaminate municipal solid waste incineration fly ash (MSW-IFA). Based on the feature of hydrodynamic cavitation, the device developed in this study (referred to as a 'washing ejector') utilizes the cavitation bubbles. A washing ejector was analyzed under a range of conditions, employing as little water as possible. In hydrodynamic cavitation, the increase in fluid pressure with increasing static pressure is mainly attributed to the increase in particle-bubble collisions via the cavitation flow. The results revealed that the fluid pressure influenced the removal of inorganic salts during cavitation in water. This is because during the washing process from the collapse of cavitation bubbles, the release is achieved through the dissolution of inorganic salts weakly bound to the surface. After treatment by a washing ejector, the removal of soluble salts elements such as Cl, Na, and K was reduced by approximately 90%. Removing the inorganic salts in the IFA altered the characteristics of the Ca-related phase, and amorphous CaCO3 was formed as the cavitation flow reacted with CO2 in the ambient air. Furthermore, the washing effluent produced by washing IFA was found to be beneficial for CO2 capture. The washing effluent was enriched with dissolved Ca from the IFA, and the initial pH was the most favorable condition for the formation of CaCO3; thus, the effluent was sufficient for use as a CO2 sequestration medium and substitute for the reuse of water. Overall, the process presented herein could be effective for removing soluble salts from IFA, and this process is conducive to utilizing IFA as a resource.

Effect of inorganic carbonate and organic matter in thermal treatment of mercury-contaminated soil.

Thermal treatment of mercury (Hg)-contaminated soil was studied to investigate the desorption behavior of Hg at different temperatures. The soil samples were collected from two locations with different land uses around the mine and industrial site. The effect of soil properties such as inorganic carbonate minerals and organic matter content on Hg desorption was investigated to understand the thermal desorption process. The effect of soil composition on Hg desorption showed that behavior at 100 °C was similar, but a different behavior could be found at 300 °C. The thermal desorption efficiency at 300 °C is affected by the thermal properties of soils and the Hg desorption capacity of the soils. The Hg from both soil types was removed above 300 °C, and Hg was effectively removed from mine soil due to the partial decomposition of carbonate in the soil composition, while industrial soil showed that desorption would be restrained by Hg organic matter complexes due to organic matter content. Despite a relatively higher concentration of Hg in the mine soil, Hg removal efficiency was greater than that in the industrial soil. Sequential extraction results showed that only the Hg fractions (residual fractions, step 6) in mine soil changed, while the industrial soil was affected by changes in Hg fractions (step 3 to step 6) at 300 °C. Changes in soil pH during thermal desorption are also influenced by heating time and temperature. Therefore, the mechanisms of Hg desorption during thermal treatment were observed by soil properties. The volatilization of Hg in the soil is induced by organic carbon, while soil Hg release is controlled by organic matter complexes.

Comparison between Fe2O3/C and Fe3C/Fe2O3/Fe/C Electrocatalysts for N2 Reduction in an Alkaline Electrolyte.

Cost-effective and nonprecious iron-based catalysts were synthesized, evaluated, and compared for electrocatalytic N2 reduction reaction (NRR) under alkaline conditions in the potential range from -0.4 to 0.1 V [vs reversible hydrogen electrode (RHE)] at low temperature (≤60 °C) and atmospheric pressure. The tested H-type cell was separated by an anion exchange membrane in 6 M KOH alkaline electrolyte (pH = over 14) in order to minimize hydrogen evolution reaction and to directly form NH3 gas. The amount of ammonia synthesized was quantified using an indophenol blue method and cross-checked with 1H nuclear magnetic resonance spectroscopy and ion chromatography using both 14N2 and 15N2 gases. Because of the synergistic effect between the Fe3C, Fe2O3, and Fe composites in the NRR, both the ammonia formation rate and faradaic efficiency in Fe3C/Fe2O3/Fe/C were approximately fourfold higher than those in Fe2O3/C at 60 °C and 0.1 V (vs RHE). These results can provide insights into designing Fe-based electrocatalysts for NRR at atmospheric pressure.