Continuous Structural Displacement Monitoring Using Accelerometer, Vision, and Infrared (IR) Cameras.

With the rapid development of computer vision, vision cameras have been used as noncontact sensors for structural displacement measurements. However, vision-based techniques are limited to short-term displacement measurements because of their degraded performance under varying illumination and inability to operate at night. To overcome these limitations, this study developed a continuous structural displacement estimation technique by combining measurements from an accelerometer with vision and infrared (IR) cameras collocated at the displacement estimation point of a target structure. The proposed technique enables continuous displacement estimation for both day and night, automatic optimization of the temperature range of an infrared camera to ensure a region of interest (ROI) with good matching features, and adaptive updating of the reference frame to achieve robust illumination-displacement estimation from vision/IR measurements. The performance of the proposed method was verified through lab-scale tests on a single-story building model. The displacements were estimated with a root-mean-square error of less than 2 mm compared with the laser-based ground truth. In addition, the applicability of the IR camera for displacement estimation under field conditions was validated using a pedestrian bridge test. The proposed technique eliminates the need for a stationary sensor installation location by the on-site installation of sensors and is therefore attractive for long-term continuous monitoring. However, it only estimates displacement at the sensor installation location, and cannot simultaneously estimate multi-point displacements which can be achieved by installing cameras off-site.

Multifunctional Smart Ball Sensor for Wireless Structural Health Monitoring in a Fire Situation.

A variety of sensor systems have been developed to monitor the structural health status of buildings and infrastructures. However, most sensor systems for structural health monitoring (SHM) are difficult to use in extreme conditions, such as a fire situation, because of their vulnerability to high temperature and physical shocks, as well as time-consuming installation process. Here, we present a smart ball sensor (SBS) that can be immediately installed on surfaces of structures, stably measure vital SHM data in real time and wirelessly transmit the data in a high-temperature fire situation. The smart ball sensor mainly consists of sensor and data transmission module, heat insulator and adhesive module. With the integrated device configuration, the SBS can be strongly attached to the target surface with maximum adhesion force of 233.7-N and stably detect acceleration and temperature of the structure without damaging the key modules of the systems even at high temperatures of up to 500 °C while ensuring wireless transmission of the data. Field tests for a model pre-engineered building (PEB) structure demonstrate the validity of the smart ball sensor as an instantly deployable, high-temperature SHM system. This SBS can be used for SHM of a wider variety of structures and buildings beyond PEB structures.

Development of a High Precision Displacement Measurement System by Fusing a Low Cost RTK-GPS Sensor and a Force Feedback Accelerometer for Infrastructure Monitoring.

A displacement measurement system fusing a low cost real-time kinematic global positioning system (RTK-GPS) receiver and a force feedback accelerometer is proposed for infrastructure monitoring. The proposed system is composed of a sensor module, a base module and a computation module. The sensor module consists of a RTK-GPS rover and a force feedback accelerometer, and is installed on a target structure like conventional RTK-GPS sensors. The base module is placed on a rigid ground away from the target structure similar to conventional RTK-GPS bases, and transmits observation messages to the sensor module. Then, the initial acceleration, velocity and displacement responses measured by the sensor module are transmitted to the computation module located at a central monitoring facility. Finally, high precision and high sampling rate displacement, velocity, and acceleration are estimated by fusing the acceleration from the accelerometer, the velocity from the GPS rover, and the displacement from RTK-GPS. Note that the proposed displacement measurement system can measure 3-axis acceleration, velocity as well as displacement in real time. In terms of displacement, the proposed measurement system can estimate dynamic and pseudo-static displacement with a root-mean-square error of 2 mm and a sampling rate of up to 100 Hz. The performance of the proposed system is validated under sinusoidal, random and steady-state vibrations. Field tests were performed on the Yeongjong Grand Bridge and Yi Sun-sin Bridge in Korea, and the Xihoumen Bridge in China to compare the performance of the proposed system with a commercial RTK-GPS sensor and other data fusion techniques.

Topical application of Scutellaria baicalensis suppresses 2,4-dinitrochlorobenzene-induced contact dermatitis.

Allergic contact dermatitis (ACD) is a prototypic T-cell-mediated cutaneous inflammatory response. In the present study we describe the anti-allergic effect of topically applied Scutellaria bacalensis aqueous extract (WSBE) in suppressing 2,4-dinitrochlorobenzene (DNCB)-induced ACD in BALB/c mice. Topically applied WSBE attenuated the epidermal thickness and mast cell infiltration into the skin in DNCB-induced contact dermatitis. Furthermore, WSBE suppressed DNCB-induced production of serum IgE as well as IL-4, IFN-γ, and TNF-α in the skin. Topical application of WSBE also ameliorated the significant decrease in dermal glutathione and superoxide dismutase levels. Moreover, present results demonstrated that the baicalin, bioactive compound of WSBE, was able to penetrate into the skin following topical application, which was confirmed by the HPLC analysis using rat model. Taken together, topical application of WSBE exerts beneficial effects in contact dermatitis model, suggesting that WSBE might be a candidate for the treatment of contact dermatitis.